Related
Been having a problem on my XDA II in that when I receive a call and answer it, it takes a few seconds before I can hear the other person. Sometime it woks fine and others the person can hear me but I can't hear them ?
It has been back for repair 3 times and it still does the same thing. The speaker is fine as it works loud and clear, it's only on incoming calls not on outgoing.
The place where I have bought it will now swap it out for a XDA IIi as you cant get the II anymore around here. That's great but I would still like to know why it went wrong ? Anyone got any clues ?
plz explain what is delayed.
Could it be just too much s/w running?
I found that when I am running activesync, calendar & contacts sometimes there is an awful delay in the response of the MDAII. Especially the BT headset has delays then of more then 20seconds (so I answer call on MDAII and then transfer it to headset when this occurs).
delay on phone
:shock: Me too!
Not sure if I should answer on screen,accept or reject,or green button.Both seem to delay,often with caller ringing again.
When the phone rings and you answer it. You hear nothing. It's a case of hello ? hello ? etc. They can hear you but I can't hear them then all of a sudden their sound will just kick in.
Actually sometimes when I dial out, I never hear a ringing tone and all of a sudden the person cuts in.
There is a delay. I have no software running at all. It does this from a hard reset as well.
What bugs me is that it has gone back 3 times and they claim it has been tested and fixed. It clearly hasn't.
Hope the XDA IIi is better, cos this was very annoying.
Hi Ekko,
Would you happen to be running Pocket Bluetooth Tools?
Cheers,
Pete
Hi, the phone was fine until about 6 mths old when it started doing this. I had Pocket Bluetooth on it and it used to be totally fine. This never affected it at all.
Obviously once this problem arose, I have hard reset the machine on a number of occasions and have used it as a clean machine. Same problem ? So not down to Bluetooth Tools.
Hands Free mode
In order to use an Himalaya with a BT headset you need to run 2.20 translated. The Hands Free profile works better and it will even support caller ID and there is no delay when answering calls.
Hello there,
has anyone an idea how to realize this:
blackstone is in standby - bluetooth is activated - bluetooth headset is on - both connected - call comes in - I take the call with the bt-headset - talk - I end the call with the bt-headset - blackstone remains on until the adjusted time for standby is reached
but I would like the blackstone switch into standby mode immediately after ending the call
is this possible ?
greetz
smuggs
This needs addressed - sleep after a call during headset mode
In headset mode the phone does not go into sleep mode or power off automatically after a call. This is a major issue for those of us who leave the phone in the pocket in the car or when using bluetooth headsets. I have finished calls recently and then 5 or 10 mins later my phone would connect to someone random in the phonebook whilst driving which is quite embarrassing "I didnt call you" - "yes you did"!!
In the meantime I am using constant device lock but this is a clumsy solution for what surely MUST be a common problem. Can anyone else not help us out and try to get the device to sleep after a call during headset mode? I would be so grateful for a useful solution that doesnt involve a constant device lock that I dont really need!
Cheers
I'm having the same problem also....
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
the_flyer said:
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
Click to expand...
Click to collapse
ooch aye the noo ...
obviously NOT ... which makes me wonder ... as for me this is a main issue
pimpin' seems to be more important than functionality ... huh?
i guess i will write to htc and see what they r saying
will post answers here
greetz
smuggs
Sounds good man, keep up posted. Its a major issue for me too!
ok folks .. here is the very annoying answer i got from htc support
You recently wrote us about an issue that you have encountered with your HTC Touch HD. There is only one way to instantly set the device into standby mode: please press quickly the power on/off.
what shall i say ... THAT'S CRAP !!!
and i'm still thinking that there must be a workaround ... redefining the buttons or something like that ... any ideas from the specialists in here ?
c'mon guys - help us out here
greetz
smuggs
that's really strange...just tested it.
connection htc/jabra bluetooth.
htc device lock ON.
an incoming call arrives, pick up the call via bt-headset. end the call via bt-headset. phone is immediately locked again (htc own device lock), display is on. after 1 minute also the display turns off.
or do you mean something completely different?
Same here and it feels retarted.
Ooe of the major purposes of a bluetooth headset is to avoid contact with the device. So having to take out the phone or handle it (in a car/office whatever) after a BT call is rediculous.
BT headset drops call
I am not sure if I should pose my questions here but my Jabra BT headset is connected to my Blackstone on standby mode via BT. However, when an incoming call comes, the BT headset does not get the call but is transfered to the HTC handset instead. I have no problems making outgoing calls on the Jabra headset. It's frustrating when I am driving... could anyone tell me how to remedy this?
Thanks in advance.
end call via BT into standby works with LockMeLite
hello there,
with LockMeLite http://forum.xda-developers.com/showthread.php?t=478606 and my samsung wep250 bt-headset
it works
this headset is non-a2dp-capable
dunno if an a2dp capable headset will work, but will test is (next week)
greetz
smuggs
I have tried flashing newer fancy roms and tried various lockers but no applications are intuitive enough to fix this simple fault. When making a call in 'headset mode' the fast sleep mode prevents accidental presses during a call. Unfortunately when the call is ended via handsfree/car kit/recipient, the phone wakes back up to life.
Any locker I have used is active indiscriminantly when pressing the power on button to wake the device from sleep. I have tried lockmelite, hd tweak for inbuilt MS lock, pocketshield and another locker however none have the function to only lock the device whilst in headset mode and after a call has ended. This is a request to developers, expert cooks and modifiers please can anyone help us out?
Thanks a million
Check this, it can do the trick...
h..p://www.pocketshield.net/default.htm
S2u2 V2.04 workes fineas you needs, even look during a call (gives black screen)
I'll do a try
As I have the same request/problem I'll try the following with the help of AGEProfile.
- I create a profile actived when the headphone is connected, when this profile is activated it launches a program named MySuspend so my phone is suspended.
- I create another profile activated when the headphone is connected and there is a call in progress, this profile does nothing but it exists (only)
So when my phone goes connected with the headset (BT) it goes suspended.
When I receive a call it wakeup as normal and the profile is switched to the second one (but does nothing)
When the call finishes, the first profile is activated again and the phone goes suspended.
That's all (and it should work, I just made the setup for that).
Regards,
P.S. sorry for my english because it's not my language.
I also have this same question. After ending the call the screen stays unlocked and will inadvertently call a number sometimes.
I tried
Yes I made a try yesterday evening in real conditions and it work very well
So I'm very happy
I forgot to mention that I also use the Inesoft to have the screen locked when one call come in.
Hope this will be useful for you too
Regards,
Hello XDA crew,
I have some problems and I hope you can help me with that. Xperia phone is really cool but one thing for me is really annoying. And that is the calling performance of Xperia.
These are the main problems:
1. When I plug in the headset, the ringtone plays both on the headset speakers and the phone speaker. Is there a way to let the ringtone play only on the headset speakers?
2. When I plug in the headset, the microphone of the headset isnt active. Only the microphone of the phone is active. So, people can not understand me when I speak to the headset microphone. But they can hear me when I talk to the microphone of Xperia.
These are some other problems but not so important for me:
3. The volume of the call is too high. Even when I set the volume low, people can hear the person who I am talking with.
4. Microfone of Xperia get active after for about two seconds when I answer the phone. So, I have to wait for about 2 seconds to say 'hi'.
5. The answer button of the headset doesn't work.
Can someone help me with this problems or just one of these problems?
Note: I have hardreset my phone two times and reinstalled the ROM software one time via SEUS. I didnt get any result. I have the original Vodafone R2 software.
I have the 2 second delay too. Using gtrab wm6.5 custom rom
M.Ozturk said:
Hello XDA crew,
5. The answer button of the headset doesn't work.
Click to expand...
Click to collapse
Unplug the headphone jack during a call and plug again (during the same call) and press the answer button. It will terminate the call and start working (until your next xperia soft reset). Double-press the answer button when idle, and it will repeat the last call. If that doesn't work, try it again and again after the first trick of plugging/unplugging and it will work on your 4th/5th try. From then on, all answer/hangup/'repeat last call' functions will work. Until you soft reset of course.
I'm calling a toll free (service center) number to do the trick whenever I have to use the handsfree.
VanAuberjim said:
Unplug the headphone jack during a call and plug again (during the same call) and press the answer button. It will terminate the call and start working (until your next xperia soft reset). Double-press the answer button when idle, and it will repeat the last call. If that doesn't work, try it again and again after the first trick of plugging/unplugging and it will work on your 4th/5th try. From then on, all answer/hangup/'repeat last call' functions will work. Until you soft reset of course.
I'm calling a toll free (service center) number to do the trick whenever I have to use the handsfree.
Click to expand...
Click to collapse
It works (on a WM6.5 rom also)
Nice little trick there, thanks
Tnx for the trick vanauberjim. So it seems more like a hardware problem. Anyway, I will try it tomorrow. Hope that the main problems also be solved like this.
Both 2. and 5. get fixed with the trick, but I just hope SE will find a permanent fix. It's not a solution to unplug and replug the headphones during calls.
My question is: are we the only 3 persons that have this problem? Is this problem originally caused by the headset hardware? Is it caused because the plug is so tight that it severely scratched the middle ring in the headphone jack and it can't always make a connection with the middle ring (the microphone one)? How many people have this problem?
Have the same problem
I do have the same problem and workaround works for mee to but it is annoying!
@vanauberjim, I can ensure you that we are definitely not the only one with these problems. I saw on a popular dutch forum that a lot of people have exactly the same problem.
M.Ozturk said:
@vanauberjim, I can ensure you that we are definitely not the only one with these problems. I saw on a popular dutch forum that a lot of people have exactly the same problem.
Click to expand...
Click to collapse
Have you tested with another hands-free set ? is it the phone or the hands-free causing the problem?
I have send my hands-free to SE yesterday so they will check it and if it was ok I will send the phone back.
About 3 seconds of delay when I answer , I haven't done anything yet , is it a bug , I mean do we have this problem or every X1 out there.
Ok, post back soon because if it's faulty hands free we only have 6 months warranty on handsfree (and battery) and time's running out. The phone has 2 years warranty so we have plenty of time for its handset's faults.
I got the same problems, is annoying BTW ... and about the trick mmm quiet annoying as well, but if is the only way to make it work, no more than just do it.
shwan_3 said:
Have you tested with another hands-free set ? is it the phone or the hands-free causing the problem?
I have send my hands-free to SE yesterday so they will check it and if it was ok I will send the phone back.
About 3 seconds of delay when I answer , I haven't done anything yet , is it a bug , I mean do we have this problem or every X1 out there.
Click to expand...
Click to collapse
I think it's a phone problem. I use the original headset and sometimes when I plugin the headset the phone calles the person who I have called earlier. Now I have another stupid problem. When I plugout the headset, the phone still thinks that the headset is plugged in on the phone. I see the headset icon on the phone and when I call someone, I cant hear and speak with the person. Only way I can do this is to plugin the headset again and speak that way. When I plugin and plugout for several times, the headset icon dissapears and I can make my call again without a headset. I think that alle these problems are because the jack plug doesn't function good.
Another issue. I call it issue because it's not a problem, but just a stupid choise of sonyericsson:
- Some soundnotifications during calling like 'busy tone' or 'waiting tone' plays from the main speaker of the phone in instead of the calling/ear speaker. This way, all the people who are sitting next to you hears that the person who you are calling is busy
It will be for the 4th time that I go to the shop with a problem. So I will ask to the shopper if I can choose another phone. I'm thinking about the Touch Pro 2. I'm sick of the problems of Xperia. Don't think that HTC will have the same problems.
sir, my phone speaker is automatically switching on for incoming and outgoing calls,but not showing speaker symbol, and ear phones also not working .i tried hard resetbut nothing change. please anyone give suggestion
I too get this problem
Not really sure about the solution, but i have a simple work around that works on my p3400 WM6.5
1. Mute the phone (system as well as ring)
2. Restart
Hello everybody
I'm new here and I like to discuss something very weird.
Sinds 3 months I'm the owner of my Xiaomi mi A1 on android one. No problems at all and except of the camera I like the phone very much.
Sinds a week of three some weird symptom has started.
Sometimes when I am calling someone there is no sound incoming and outgoing. The person on the other side can't hear me and I don't hear the other person. There is also no connections or dialing sound when starting the phone call. I can see on my display that the other person accept my call because the timer is starting to count. The strangest thing is that this is only the first time I make a call; usually in the morning. When I quit the call en call again there is no problem and the audio is working as it should be. Also incoming calls is no problem and works well.
I tried everything I found on internet, reset my device several times . Also removed the SD card etc. Reset all settings etc.
I don't know what what to do.
I also have an Samsung gear S3 frontier with Bluetooth communication and also reset this watch several times without success. When I disconnect the watch the problem stays.
Hopefully anyone can help me.
Reply to this thread
Roy_Teunissen
Royaldelux said:
Hello everybody
I'm new here and I like to discuss something very weird.
Sinds 3 months I'm the owner of my Xiaomi mi A1 on android one. No problems at all and except of the camera I like the phone very much.
Sinds a week of three some weird symptom has started.
Sometimes when I am calling someone there is no sound incoming and outgoing. The person on the other side can't hear me and I don't hear the other person. There is also no connections or dialing sound when starting the phone call. I can see on my display that the other person accept my call because the timer is starting to count. The strangest thing is that this is only the first time I make a call; usually in the morning. When I quit the call en call again there is no problem and the audio is working as it should be. Also incoming calls is no problem and works well.
I tried everything I found on internet, reset my device several times . Also removed the SD card etc. Reset all settings etc.
I don't know what what to do.
I also have an Samsung gear S3 frontier with Bluetooth communication and also reset this watch several times without success. When I disconnect the watch the problem stays.
Hopefully anyone can help me.
Reply to this thread
Roy_Teunissen
Click to expand...
Click to collapse
I'm using S3 Frontier with OnePlus 3 and facing similar issue from the day one. 30% of calls (whether It's incoming or outgoing) are without sound and the I had to make the calls again. Waste of money. Then i stopped using Phone Audio for the watch and using for notifications only.