Been trying for hours now to try and sort out an issue I am having. My S4 is damaged, the phone works but the screen and digitizer is broken. I want to check a few sms messages, access and control the phone from my PC and basically make a complete clone/image of my phone. I cannot for the life of my figure out how to do this.
I use windows 7, I have installed SDK tools, have ADB/fastbook etc. Device isn't found with ADB. Spent hours reading information about installing correct drivers, which I have done. No luck what so ever. The phone is not rooted, developers tools is not on, usb debugging is not on either.
I am starting to think this is a lost battle as I cannot sort this out.
Any ideas?
Thanks
Bump.
Anyone? Is there no way to solve this problem? Tearing my hair out.
Best bet (given ADB doesn't work) would be to root the phone & get a custom recovery on (via Odin; this is might be very difficult if you can't somehow have the phone & PC recognise each other - you don't need to have had debugging on though) then do a nandroid backup (someone using the same recovery/version might be able to walk you through the button presses.
What S4 variant (model number) are we talking about ?
MistahBungle said:
Best bet (given ADB doesn't work) would be to root the phone & get a custom recovery on (via Odin; this is might be very difficult if you can't somehow have the phone & PC recognise each other - you don't need to have had debugging on though) then do a nandroid backup (someone using the same recovery/version might be able to walk you through the button presses.
What S4 variant (model number) are we talking about ?
Click to expand...
Click to collapse
GT-I9505 is the model number that is displayed behind the battery. The screen is broke and so is the touchscreen (completely black). I tried to figure out via ODIN but that wouldn't recognise the phone either. I assumed you'd need to boot in recovery/download mode but because I cannot see anything on screen, when I do the volume down, home and power thing I do not know what to do next so the phone boots up normally. I know this because I have unread SMS and when phone loads my SMS tone goes off.
Really not sure how to get around this.
You're going to have to get it into DL mode somehow (don't need to use home button on S4, just vol down/power); try a jig. Once you've done that, then you need to get the phone & PC to recognise each other. If you're having problems with that, prepare to continue to do a lot more reading/trying stuff if you're having PC-side driver issues (there's a lot of threads on here re: the issue). There's also an 'Odin troubleshooting' guide in S2 General by Hopper8 which is worth looking at as much of the stuff he suggests also holds true for the S4 (except the firmware stuff, which is obviously different).
There's not going to be any quick & easy in this instance, I'm afraid. It's going to be hard work.
Edit - Also..USB board/port on the phone might also be damaged, so when you reach the point of having tried everything on the PC-side & everything you can possibly try on the phone-side, replace the USB board/port on the phone. This is quick/easy/cheap (<US$20) to do & might just enable you to get things done where everything else has failed.
Extra edit - And...A jig working (getting you into DL mode) or not is probably a good test of whether the USB board/port on the phone is still good; I.E if the jig works, the board/port is probably still good, if it doesn't, the board/port might be shot as well.
The USB is fine because when I plug the phone in when in normal boot it recognises the data storage. I will try to boot in DL mode. Are there any gestures my S4 will do when booting in DL? Vibrations? As I cannot see anything on screen that will indicate it's worked. I think that once I can get the phone to work with ODIN/ADB I will be good to go as I am relatively tech savvy.
Nope. You're going to by flying blind so far as having no screen/no vibrations in DL mode goes. You're going to be relying on the jig working, and once you hook it up to the PC & fire up Odin, you'll know straight away whether you've got a successful connection up & running (as screenshots in the many Odin guides on here will show you).
I see, will just have to keep trying.
So on the S4 it's hold power and volume up, then wait? or do I need to press anything else afterwards? Or is it power and volume down?
Thanks
No luck with download mode. Girlfriend has a note 2, and her method is Vol down, home and power button. Screen comes up almost immediately with confirmation. Volume up needs to be pressed to confirm. Tried to replicate with S4, no avail.
No luck with starting S4 in download mode. I have followed video on youtube. Supposed to be Vol Down, Home and Power button. Wait till vibrate and warning screen, then press up. Because I cannot see the screen I cannot see the warning screen. But I Hold for 4 seconds, release just after vibrate and then press up, but phone seems to boot up in normal mode.
Ok, finally in download mode, now what? I know it works because it installed new drivers and device manager states a samsung modem. Need to try and clone and do what I need to do ASAP and taking to store tomorrow to exchange for new one.
Any last minute ideas?
Thanks
ODIN3 v1.85 shows a yellow box, this is good right? I downloaded CWM from http://galaxys4root.com/clockworkmodtwrp-recoveries/
What do I need to do next, do not want to make this worse, I just need to enable usb debugging or at least be able to use adb, I am good to go from there
Only a few hours left? Surely someone knows what Flash I need to do to allow me adb access???
Right, go into recovery mode...adb now works.
What do I need to do to enable debugging?
Edit:
I can't get adb to work... error: closed
any ideas
If you cant get adb to work in recovery then youre out of luck.
Incase this happens with new phone, always have a remote access app like Cerberus installed. MightyText is a pretty nice app too.
I see, ok no worries. Thank you anyways
Related
I was wondering if anyone is working on a way to fully root the Behold 2. I tried the temporary root tutorial but seeing how fastboot cannot be accessed I was curious if there has been progress made or is it totally unrootable
Eric
Yeah i'm working on it without a behold 2 at the monent
I have 2 or 3 ideas which i'm sure will work. I'll have more when i finally get rid of my galaxy and get a behold 2
I will keep my fingers crossed on you getting a Behold 2. I was going to take my Behold 2 back to T-Mobile and go back to the MyTouch 3G but I cant see getting rid of a device when there is soooo much potential for it. Plus having the AMOLED screen and the 5MP camera helps too.
Eric
don't forget 320mb ram!! even more than any other HTC phone right now.
The Behold II is nice, I have one, anything I can do to help let me know, I am very eager to root this thing and get rid of touch wiz.
u can install open home which should do it for now.
Thats already done, but there is still the taint of touchwiz.. wonderful phone, horrible UI.
Yeah I had Open Home on it as well but earlier today I purchased GDE from the market and am really digging this home replacement.
Eric
Found this by accident, cant figure out how to do it again. was trying to get into recovery mode.
Awesome. So it can be accessed somehow. that is VERY good news
Eric
Interesting!
You can flash the recovery through Odin too, but its restored on the next boot.
Fastboot mode
Ok so I have been able to reproduce it now, this is how I am getting into fastboot, have your usb cable plugged into your computer then plug it into the phone, very quickly press vol down + send + power. thats it, the part i was missing was the usb cable timing, it appears to be required, this is of course from a powered off state.
GREAT I just tried this and it WORKS yessssss.... someone wanna try rc29
I keep trying to get this, and all it does is bring me to recovery whether I hold or briefly press volume down, send, and power.... any suggestions?
It's powered off, plug in usb cable, quickly press buttons, and I get recovery... no fastboot for me
EDIT:GOT IT!!!!! Seems after trying in order volume down, send, power I wasn't able to get it, however, I just tried, send, volume down, power in that order and it worked!
no no no .,.,..
power off wait 5 sec's
plug usb in and immediately press volume down, send, and power
I think the reboot issue is caused by a scan in an init script or something like that..
To solve this issue I would have to look deeper into it, a quicker way would be to find someone who knows java.
He could write an app which starts itself on boot_completed and executes the root command.
I was looking at exactly that Getting there...
Getting there.
hehe, cant wait.
man i sure hope someone figure out how soon, i love this phone
This guy found a work around for the samsung moment ,,, which suffers the same reboot issue...
http://midnightchannel.net/blog/255-how-to-root-the-samsung-moment.html
help i9000 after flash, doing loop of at&t logo, can not enter download mode,
when plugged in screen goes black.
!! if anyone can help please do not hesitate, mostly appreciated.
Try to hold the Down+Menu+Power combination while INSERTING the battery into the device.
i try that seem to have no response and when unplugged from usb it loop at&t logo
or plugged in usb screen goes black and no response seem from pressing buttons
I had a similar problem as most phones in Canada seem to have Download/Recovery mode disabled, and here is what worked for me.
Grab something like One Click Un Root (all models), and click one click un root (obviously phone has to be on and plugged into the computer).
This should automatically reboot you into Recovery Mode!
All you have to do is "wipe data/factory default" or something like that (should be the third option).
As it states, you will loose all your data, but at least you will have a functionning phone!
did it work?
Hi. I have similar problem. Can anybody give instruction what can I do?
I have this problem too. Please help somebody
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. ****[email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
This is not working. Probably because the phone is not in USB debugging mode as I can't change it... Is there any other way to get the phone into recovery mode?
**** me
i had the same thing happen to me the other day with my bell galaxy s and my phone wont do the 3 button combo trick. i left my phone plugged in to a wall charger for a while until the back of the phone became a little warm. i pulled the battery and then left the power cord plugged in and put the battery back in. i held the volume down and enter button until the battery charging indicator showed up, then i also pressed and held the power button until the boot animation started (this is the blue moving swirl and music, not the galaxy s splash scree) and then i let go of the power button. it took a few attempts at this before it actually worked, but eventually it will go into download mode at which time you can open the odin app, then plug in the usb cable and flash your phone that way. it did seem to make a difference if the back of the phone (around the camera area) was warm. if i let go of the power button while the music was playing and the phone did not enter download mode i would keep all 3 buttons pressed until it shut down again, then i would only let go of the power button while the phone initiated the charging screen, then once the battery logo was displayed i would hold the 3 buttons again and would just keep doing this until it went into download mode. i have flashed it at least 5 times today and i have been able to do this each time.
i also had an issue where odin would not recognize my phone was plugged in and windows would show a message saying the usb device was not recognized. i left the phone plugged in and while in download mode i pressed the volume up, enter button and power button until the phone went blank and when the galaxy s logo showed up i let go of the power button and the phone would go into recovery mode and then the usb drivers would be installed. i would then do the 3 button combo for download mode and odin would work fine. it took several attempts but it does work. i hope this helps you guys
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
xZeDgEx said:
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
Click to expand...
Click to collapse
That's what mine did too, several times in a row and then it worked. For some reason it only works after the battery is charging for a bit and the back becomes warm. then it works at will
No luck. I am probably screwed getting it exchanged now too as I am passed the 14 days from Best Buy.
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
xZeDgEx said:
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. [email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
Click to expand...
Click to collapse
AllGamer said:
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
Click to expand...
Click to collapse
Its my fault??
I did not hack my phone. Its not rooted, I did nothing to it.
By "unlock" I meant exactly that, unlock as in swiping the screen to unlock it.
The more I search the net the more posts I find of Galaxy S phones randomly bricking...
on the original message sounded more like you went to Unlock the phone, as in SIM unlock the phone using any of the tools available out there, and there has been already several people which had the same problem.
if you go back to Bell for an exchange, you better not use the word "unlock" rather use Swipe
as the message on the phone "swipe the screen to unlock"
there are no known issue about this causing the phone to brick.
if that is what happened to you, you should have started a new topic for people to help you, instead of hijacking the topic from the OP, as your issue is different from OP, the OP actually screwed up because he/she flashed the wrong ROM to the i9000
... anyways, Does it work if you reboot the phone?
I have rebooted the phone about 100 times. The phone crashed when I unlocked it to check a text I received. (not hacked). Has not booted up properly since. I have found many others with the same issue who have also not hacked/rooted/unlocked/ their phones.
Waiting on Best Buy to call me back. I am so pissed right now, I have been bragging to my friends and co-workers how awesome this phone is, one has already picked one up, I hope his doesn't brick too. Not recommending it to anyone anymore..
did you load a lot of MP3 to the phone?
can you boot into Recovery Mode?
in the recovery mode you can wipe the Cache and wipe the data
that should make your phone work normal again
it'll be best to open a topic to help you trouble shoot your interesting issue, as it's the first i've hear that you get a black screen after Swiping out of the lock screen
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
xZeDgEx said:
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
Click to expand...
Click to collapse
on the other topics relating to the 3 button not working.
have you tried the heating up method?
or the plugging the battery in, when all 3 buttons are pressed? (of course for this one you will need help from a friend, unless you are very skilled at keeping the 3 button on hold meanwhile able to slide in the battery in with out a 3rd hand)
So a friend called me today and said he is having problems with his Vibrant and wanted me to come take a look at it. He explained that he flashed a rom and now everytime he boots it up, it gets stuck in a force close loop hell. I got there and verified that's happening and said that I could just flash him back to stock. Well, come to find out he's also hardware locked! I tried to figure out a way to enter safe-mode (have used this on my Mytouch but it had actual buttons to make this work) but it was no-go since it's capacitive. On top of all this, he doesn't have debug mode enabled and I can't get to the settings due to the force close loop and no working launcher/home. I couldn't get any adb commands sent to the phone due to no debug mode, so that means I can't even adb reboot into recovery. I spent almost 2 hours on it before I had to give up. Does anyone have any suggestions that I may have overlooked or not thought of?
Greatly appreciated! XDA has some of the smartest damn people around!
Have you checked this out?
http://forum.xda-developers.com/showthread.php?t=804305
Duce HD2 said:
Have you checked this out?
http://forum.xda-developers.com/showthread.php?t=804305
Click to expand...
Click to collapse
Yes, in fact I had that very thread open on my netbook as I was working on his phone. There's one (of many) problem with this:
"turn on USB debugging in Settings-->Applications-->Development"
As I stated in my OP, he doesn't have debugging turned on already, and I'm unable to get to it in settings because at startup it's in a FC loop and I can't get to settings either by holding MENU or using the launcher.
Is there another way to get to phone settings besides those two methods? How about going into safe mode? I've done that before with my MT3G, but it has hard buttons that facilitate this with ease. With capacitive, not so much. Is it possible to enter safe mode on the SGS phones with capactivie screen?
I seriously doubt this has stumped the brains of XDA!
Email me lets see if I could help
[email protected]
What do you think caused the force close loops? Was your friend tinkering with his phone? Did he install a lagfix?Are you doubly sure he's hardware-locked?Did you try Download mode?
Lots of questions...I had this problem once. It was due to the fact that installed Ryanza's early lagfix and tried to remove it. My phone had a force close loop, BUT I had enough patience to wade through the loops and in the very short gaps at which they appeared, I managed to navigate the phone into settings (~an hour). The moral is: Try very hard to get into settings and don't lose your patience.
You can try booting into safemode, maybe that will help. Just turn it off and when it powers on the second you see the animation start press and hold the home button.
cthach11 said:
What do you think caused the force close loops? Was your friend tinkering with his phone? Did he install a lagfix?Are you doubly sure he's hardware-locked?Did you try Download mode?
Lots of questions...I had this problem once. It was due to the fact that installed Ryanza's early lagfix and tried to remove it. My phone had a force close loop, BUT I had enough patience to wade through the loops and in the very short gaps at which they appeared, I managed to navigate the phone into settings (~an hour). The moral is: Try very hard to get into settings and don't lose your patience.
Click to expand...
Click to collapse
From what I gathered, he tried installing the FrankenTwiz rom and something went wrong. He couldn't fully explain exactly WHAT went wrong, and so I'm coming into this whole thing without a lot of answers to help troubleshoot it. I know he's HW locked because that was the first thing I tried (recovery mode) and it's not able to get into it. When I fist got my Vibrant it was HW locked and the behavior is the same. I exchanged mine the next day for a non-HW locked. I tried every method to get into recovery/download mode but unable to. I remembered "safe mode" from my MyTouch 3G, but it needed the hard button (menu) pressed on bootup. Being capacitive screen, it doesn't respond the same way so I couldn't even use safe mode. He doesn't have USB debugging enabled and I can't get to settings to enable it due to the FC loop. I sat there pressing CLOSE a million times to find that "break" in the process to try and get to settings with no luck. Hope that answered everything.
icandy75 said:
You can try booting into safemode, maybe that will help. Just turn it off and when it powers on the second you see the animation start press and hold the home button.
Click to expand...
Click to collapse
That didn't work. I thought safe mode was MENU, not home? (btw- which animation? The tmo pink or the Galaxy S? Tried both an no result.)
Ok, figured out SAFE MODE!
Power up the phone and start pressing the capacitive buttons. As soon as they light up during boot up process, press and hold MENU & HOME all the way through until you see SAFE MODE appear in the bottom left of the screen. At that point you can release the buttons and you will now be in safe mode.
Now I just need to get in touch with my friend and meet up with him to try this. Hopefully it will break the FC loop from Hell and I can get into his settings to enable debugging mode.
**MODS - I didn't find how to get into safe mode anywhere in the Vibrant forums. Maybe it can be added to the Bible to help others? Thanks!**
That's new for me, mine goes holding the home key. Timing is of the essence though. I have to press and hold the second the S forms on boot.
icandy75 said:
That's new for me, mine goes holding the home key. Timing is of the essence though. I have to press and hold the second the S forms on boot.
Click to expand...
Click to collapse
I tried multiple times using your method and no dice. I get consistent results with my method (MENU + HOME), so not sure what to say...
Anyhow, it looks like he's screwed. Met up with him after work and even though I can get into safe mode, the TW Launcher is still going nuts, FC hell! Unable to get it to stop long enough to get to settings to enable debugging. He's going to put it on Ebay for parts. Dude had it for a week and is out $400. Feel so bad for him, but I guess it teaches him a lesson. If you don't know what you're getting into with flashing ROMs, better step back and either ask for help from someone with experience or just not attempt it at all. This was his first flash attempt and he crashed hard.
hey guys, i have a gt-i9000m and ive been flashing it with odin with no problems. most recently i went back to bell's stock rom, jh2 i think its called? i decided to try and update with kies to jk4 with the kies registry mod. it downloaded the update and everything fine, and said to wait for the phone to reboot.....i waited and waited and it never turned back on. now it is competely dead, cant get into recovery or download mode, doesnt do a single thing. any help?
also, i tried taking the phone to bell to get repaired, but since i bought it second hand and dont have the P.O.P, they wont do anything to help me. bastards!
Can you connect to usb on your pc see if ADB detects your phone? Try Odin as well.
Sent from my GT-I9000M using XDA App
no it doesnt show up, doesnt turn on at all....
Check this out:
http://techie-blog.blogspot.com/2010/11/how-i-unbricked-my-samsung-galaxy-s.html
will this jig method work on a phone that doesnt even power up at all?
The jig method is a perfect method. Resistance value should be very close to 301k. Dont press any button and dont touch the resistors while inserting.
You should have Galaxy S usb drivers installed.
If you have already installed Kies then follow the nest step.
Jig will take you into Download mode. After that use ODIN3 version 1.7
to flash stock firmware.
Good Luck.
hmm ok ill try this out! ive got a box of resistors, now i just have to figure out how to make 301k....
im a little skeptical that this is gonna be able to revive my phone. i used to have the 3 button ability, now it doesnt even turn on...
coconutboy84 said:
hmm ok ill try this out! ive got a box of resistors, now i just have to figure out how to make 301k....
im a little skeptical that this is gonna be able to revive my phone. i used to have the 3 button ability, now it doesnt even turn on...
Click to expand...
Click to collapse
http://www.multiupload.com/5XOM7JGLIR
This is a 3 button fix released by Bell Canada.
But obviously you have to use the JIG first of all.
Then use ODIN3 version 1.7
1. Select the above mentioned file as a PDA file.
2 . Select the PHONE BOOTLOADER UPDATE option in odin.
3. Remember do not select Re-Partition option.
Press Start. It will fix your 3 button Download mode and Recovery mode option.
Good Luck.
the jig didnt do anything....
Had the same problem. Bought mine on Craigslist, no receipt. Try a 3rd party repair shop if all else fails. It's honestly less than your monthly bill from your service provider. And if you factor in your time trying to find the cure, way less. Mine cost $72 to replace the M/B, and others have said about a hundred for theirs. It's up to you, but it's another option.
Is your Battery ok ? Because you are saying that your phone does not even turn on when you press power button.
If it is not a battery problem and the phone shows absolutely no sign.
Then it can be a hardware problem.
Because mobile should show some sign for example Mobile and Computer picture, the light on the back key.
However,can you show me the picture of your JIG.
I have tested this JIG on almost 10 mobiles. 100% working. But they were turning on by pressing power button.
Actually when you connect the 4rth and 5th pin of your micro USB with some
specific value of resistance , triggers some function and 301k triggers DOWNLOAD MODE.
The BELL version of Galaxy S has some issue with the INTERNAL SD. I have seen many cases of SD failure on this forum.
And their after sale service is also very bad. People are spending a big amount on this specific model and see what they are getting.
Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..
Crazeh said:
Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..
Click to expand...
Click to collapse
I think you can boot to download mode or revovery. The LED notifi and backlight buttons won't turn on if you boot to download mode or recovery.
Just try to boot to...
1. download mode. Just press and hold for 2-3 seconds power + home + volume down
2. then wait 3 seconds. After that press volume up.
3. Connect your phone to pc, open odin and check if a device is connected.
4. If a device was found by odin - flash a ROM (stock or something else) and hope that this will fix the black screen problem.
Good luck!!
Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks
Anyone has any ideas ?
So what all i tried is
Remove battery, hold power button for 1-2 mins, let phone for few mins and turn it on. didn't work
I tried with adb,but usb debugging not on so cmd cant find my device
Only thing left i guess if someone has idea how to get in download mode in some other way or some program that doesnt reguire download mode but can flash rom and etc.
@Crazeh
Take it back to the nearest service center and act the dumb ("I don't know what is wrong with it")
I have done that many times
They are prob gonna call me and tell me to pay for fix
No one has any idea what else should i try ?
try link2sd app form play store. it has the option to boot to download mode. I think titanium backup has the feature also.
My screen is black so i can't do anything on it.....
try to disable ambient screen. report if problem persist
How should i disable ambient screen ? While i can't see anything on phone cause of black screen ?thanks for reply Rox
Anyone?
Crazeh said:
Anyone?
Click to expand...
Click to collapse
ok so i think your problem isn't due to any rom but hardware problem
power off your phone remove the back , look on the left you see a little trap , open it , now you see connector it is the one of the screen try to see if you can disconnect and reconnect it
power on your phone and see if it work :fingers-crossed:
Where is that little trap?
btw if i do this will i loose my warranty completely ?
Crazeh said:
Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks
Click to expand...
Click to collapse
If Odin recognizes it, it means it's in Download mode. The device has different interaction with the host over USB when it's not in Download mode.
I don't see the screenshot of the failure. It may be that something got broken in your hardware, so the flashing fails. There's a known issue with the S3 called "Sudden death syndrome", I don't know if it applies also to the S3 Neo, where some of the memory of the ROM fails suddenly. If that is the case (I'm not saying it is, but it might be), there's no fix other than replacing the hardware.
Odin doesnt go over setup connection. cant post screenshot bc im new to the site. btw im sure the phone is on but recognized in odin...