Database Users

help i9000 after flash, doing loop of at&t logo, can not enter download mode,

help i9000 after flash, doing loop of at&t logo, can not enter download mode,
when plugged in screen goes black.
!! if anyone can help please do not hesitate, mostly appreciated.

Try to hold the Down+Menu+Power combination while INSERTING the battery into the device.

i try that seem to have no response and when unplugged from usb it loop at&t logo
or plugged in usb screen goes black and no response seem from pressing buttons

I had a similar problem as most phones in Canada seem to have Download/Recovery mode disabled, and here is what worked for me.
Grab something like One Click Un Root (all models), and click one click un root (obviously phone has to be on and plugged into the computer).
This should automatically reboot you into Recovery Mode!
All you have to do is "wipe data/factory default" or something like that (should be the third option).
As it states, you will loose all your data, but at least you will have a functionning phone!

did it work?

Hi. I have similar problem. Can anybody give instruction what can I do?

I have this problem too. Please help somebody

Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. ****[email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY

This is not working. Probably because the phone is not in USB debugging mode as I can't change it... Is there any other way to get the phone into recovery mode?
**** me

i had the same thing happen to me the other day with my bell galaxy s and my phone wont do the 3 button combo trick. i left my phone plugged in to a wall charger for a while until the back of the phone became a little warm. i pulled the battery and then left the power cord plugged in and put the battery back in. i held the volume down and enter button until the battery charging indicator showed up, then i also pressed and held the power button until the boot animation started (this is the blue moving swirl and music, not the galaxy s splash scree) and then i let go of the power button. it took a few attempts at this before it actually worked, but eventually it will go into download mode at which time you can open the odin app, then plug in the usb cable and flash your phone that way. it did seem to make a difference if the back of the phone (around the camera area) was warm. if i let go of the power button while the music was playing and the phone did not enter download mode i would keep all 3 buttons pressed until it shut down again, then i would only let go of the power button while the phone initiated the charging screen, then once the battery logo was displayed i would hold the 3 buttons again and would just keep doing this until it went into download mode. i have flashed it at least 5 times today and i have been able to do this each time.
i also had an issue where odin would not recognize my phone was plugged in and windows would show a message saying the usb device was not recognized. i left the phone plugged in and while in download mode i pressed the volume up, enter button and power button until the phone went blank and when the galaxy s logo showed up i let go of the power button and the phone would go into recovery mode and then the usb drivers would be installed. i would then do the 3 button combo for download mode and odin would work fine. it took several attempts but it does work. i hope this helps you guys

If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....

xZeDgEx said:
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
Click to expand...
Click to collapse
That's what mine did too, several times in a row and then it worked. For some reason it only works after the battery is charging for a bit and the back becomes warm. then it works at will

No luck. I am probably screwed getting it exchanged now too as I am passed the 14 days from Best Buy.

the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
xZeDgEx said:
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. [email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
Click to expand...
Click to collapse

AllGamer said:
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
Click to expand...
Click to collapse
Its my fault??
I did not hack my phone. Its not rooted, I did nothing to it.
By "unlock" I meant exactly that, unlock as in swiping the screen to unlock it.
The more I search the net the more posts I find of Galaxy S phones randomly bricking...

on the original message sounded more like you went to Unlock the phone, as in SIM unlock the phone using any of the tools available out there, and there has been already several people which had the same problem.
if you go back to Bell for an exchange, you better not use the word "unlock" rather use Swipe
as the message on the phone "swipe the screen to unlock"
there are no known issue about this causing the phone to brick.
if that is what happened to you, you should have started a new topic for people to help you, instead of hijacking the topic from the OP, as your issue is different from OP, the OP actually screwed up because he/she flashed the wrong ROM to the i9000
... anyways, Does it work if you reboot the phone?

I have rebooted the phone about 100 times. The phone crashed when I unlocked it to check a text I received. (not hacked). Has not booted up properly since. I have found many others with the same issue who have also not hacked/rooted/unlocked/ their phones.
Waiting on Best Buy to call me back. I am so pissed right now, I have been bragging to my friends and co-workers how awesome this phone is, one has already picked one up, I hope his doesn't brick too. Not recommending it to anyone anymore..

did you load a lot of MP3 to the phone?
can you boot into Recovery Mode?
in the recovery mode you can wipe the Cache and wipe the data
that should make your phone work normal again
it'll be best to open a topic to help you trouble shoot your interesting issue, as it's the first i've hear that you get a black screen after Swiping out of the lock screen

I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.

xZeDgEx said:
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
Click to expand...
Click to collapse
on the other topics relating to the 3 button not working.
have you tried the heating up method?
or the plugging the battery in, when all 3 buttons are pressed? (of course for this one you will need help from a friend, unless you are very skilled at keeping the 3 button on hold meanwhile able to slide in the battery in with out a 3rd hand)

problem with vibrant need help

hey guys, ive never really had any issues far as flashing rom on my phone, ive always just figured things out on my own without the need to ask a question however this one baffles me....
last night i flashed nero v5 over axura 2.2.6, no issues with that the phone rebooted, i let it sit about 10 mins rebooted no problems still so i started setting up the phone like i like it, well the first issue was the market wouldnt download anything at all period, so i reflashed, same thing, i then tried to go to back to axura at which went fine until the phone booted up and is stuck at the devsforandroid splash screen
now naturally the thing to do is hold volume up and volume down plus power get into download mode and odin to stock well heres my dilemma...
my volume up button hasnt worked for a few weeks, not sure why, its just stopped working one day.
is there a way to get into download mode while stuck in a boot loop with the volume button broken?
thanks for any help

chevyman46933 said:
hey guys, ive never really had any issues far as flashing rom on my phone, ive always just figured things out on my own without the need to ask a question however this one baffles me....
last night i flashed nero v5 over axura 2.2.6, no issues with that the phone rebooted, i let it sit about 10 mins rebooted no problems still so i started setting up the phone like i like it, well the first issue was the market wouldnt download anything at all period, so i reflashed, same thing, i then tried to go to back to axura at which went fine until the phone booted up and is stuck at the devsforandroid splash screen
now naturally the thing to do is hold volume up and volume down plus power get into download mode and odin to stock well heres my dilemma...
my volume up button hasnt worked for a few weeks, not sure why, its just stopped working one day.
is there a way to get into download mode while stuck in a boot loop with the volume button broken?
thanks for any help
Click to expand...
Click to collapse
well for me to get into download mode i dont hold the power button... i know you said your volume button doesnt work, but try taking out the battery, put it back in, hold both volume buttons down, while holding the vol buttons plug in the usb cord to the phone... BUT HAVE ODIN READY TO GO BEFORE YOU DO ANYTHING... try doing that if not your gonna have to use adb and thats something im not very familiar with at all...

The above post is right you can also try just holding the down volume button and then while holding it down, plug in the usb cord, make sure you have odin up and ready if it sees then, you are good to go, (it should) You could also use the jig (see the bible for this) once you get the little android with a shovel you can odin back to stock

If you know how to use adb you can type "reboot download mode" and it should reboot into it. Ya I dont ever use the power button when I get into dl mode but hell if your volume buttons aren't all working then I dont know.
Sent from my SGH-T959 using XDA App

AustinKnight45 said:
If you know how to use adb you can type "reboot download mode" and it should reboot into it. Ya I dont ever use the power button when I get into dl mode but hell if your volume buttons aren't all working then I dont know.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
is there a tutorial on this anywhere? i have never used adb never had any use for it i guess until now...
ive also switched to sprint and got the evo 4g, so should i not be able to fix the vibrant i guess ill sell it to whomever can fix it for cheap
p.s. not that anyone cares but when i swtiched carriers i was discussing the samsung epic with him about the update problems we face with the vibrant, and he showed me that in their monthly employee playbook they just got for next month (february), the epic is in it to recieve the foryo update (some time in february),i read it and it didnt say specifically 2.2 or 2.2.1 just froyo, but like always whos know if itll happen or not, probably not but its what he showed me

[SOLVED (KIND OF)] Transformer display dead and stock ROM installed - warranty?!

Guys, thanks to all of you - especially frysee, who was a big help via Gtalk - the biggest part of my problem is solved:
My Transformer is still bricked and display won't turn on, but I was able to go back to stock ROM and wipe all personal data. So I won't get any trouble with warranty
If anyone is interested, me or frysee could write a How To for returning to stock ROM and retrieve warranty when screen is dead.
Thanks again!
qwer23
_____________________________________
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23

I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.

demonotter said:
I was initially having this problem with my Transformer (it would usually happen when it had gone on standby and it couldn't get it to turn back on again) until I ran the ASUS updates on it - have you been able to update your Transformer on the occasions it did turn on for you?
If you've rooted it and stopped the OTA updates going onto it, you might just have to undo that and get an official ASUS firmware build on there to help fix the problem.
Click to expand...
Click to collapse
Hi!
First of all, thx for your answer.
Well as I said, the first time the problem occured, the device was out of the box and untouched before. So I don't think it has to do with something I did.
For me it normally also happened when device was in sleep mode, except the first time out of the box
I installed a custom ROM + Clockworkmod Recovery after that, hoping it'll fix the deep sleep problem. And it really didn't happen again - until now
I didn't turn off OTA updates as I first saw that thread when the device was already dead Perhaps it tried to OTA update itself but I guess I would have to confirm this manually right? And I didn't do that...
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!

Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?

frysee said:
Nice, another german Transformer
"playing the plug and play sound" means you propably have adb access? Tried getting a logcat?
Click to expand...
Click to collapse
yes, being unable to wait for the german release, i imported from uk
adb gives me "device not found". even though i'm not a total noob, i don't know what i have to change to make it work. any advice? sadly i'm working while my tf is charging @home so can't really try something. i only hope you guys have some ideas
Sent from my rooted X10i using awesome custom roms

qwer23 said:
Reflashing another ROM or the stock ROM was my first idea, too. But hell, I can't even go to recovery! No matter what I do, press, plug or unplugg, the screen stays black!
Click to expand...
Click to collapse
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...

demonotter said:
Ahh. I didn't realise the screen was completely dead, I thought you had it working some of the time as had happened to me.
If you're seeing it in Explorer, maybe it is just a hardware failure and you'll have to get Asus to look at it...
Click to expand...
Click to collapse
no i guess that it is indeed the same thing that happened to you, sometimes it worked, sometimes not. only this time it doesn't come back from the not working part I guess you see yours in explorer too if it troubles to get out of deep sleep. i guess it's just the screen that sometimes doesn't turn on for all with that problem. but for me it doesn't even turn on for booting
Sent from my rooted X10i using awesome custom roms

It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?

demonotter said:
It's possible. I don't think I tested connecting it to the Explorer while the screen was off, I assumed it just wasn't on.
Can you test it with the HDMI out and see if that shows you what would be on screen?
Click to expand...
Click to collapse
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?

qwer23 said:
Yeah, good idea! Will try this asap when I'm back home. Do I have to press something on the TF to enable HDMI output or is it enough to plug it in?
Click to expand...
Click to collapse
You just plug it in.

qwer23 said:
Hi Guys!
I have a problem that is pretty common over at MoDaCo, but I haven't read anything about it here.
My Transformer sometimes doesn't turn on or wake up from sleep mode when turned on already. You can push the power button endlessly and nothing happens. Then suddenly it'll turn on as if nothing had happened.
I had this problem the first time right out of the box, so there's no bad software installed by me, don't know what ASUS did though. Perhaps it's one of the pre-installed apps.
As I said, normally it eventually comes to life again, but now I couldn't turn it on for a whole day! After I had no success, I left it on the charger over night, but still nothing this morning.
I feel I tried everything, pushed Vol Down + Power to go into recovery, pushed Vol Up + Vol Down and plugged USB to go into (useless) flash mode just to see the device to something, but no.
The only things that happen, if I push power:
- if I plug USB, the Windows plug and play sound plays and if I force shutdown the Transformer again (long-press power), the unplug sound plays. The device even appears in the Explorer and I can access SD card, but it only shows empty folders, no files in them.
- When I force-shutdown the device, I hear an internal "click" sound, similar to the one when you switch from front to rear camera, and you hear the speakers turn off. So it seems to initialize everything and stuff...
But all the time the Transformer screen stays dead
Any advice? Really need your help here guys! At MoDaCo there's no answer so far...
Regards,
qwer23
Click to expand...
Click to collapse
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.

checkbox111 said:
When it seems dead, try holding the power button for about 5 seconds (or whatever time you hold it for when turning it off)
Leave for about 2 minutes then hold power button again (like you do when turning device on) and it should boot.
Click to expand...
Click to collapse
Tried that a lot of times already. No help.

Phone still won't turn on, but I just realized I cannot only access my SD Card, I can also access internal storage.
Is this of any help?

qwer23 said:
Tried that a lot of times already. No help.
Click to expand...
Click to collapse
Then your ****ed!

checkbox111 said:
Then your ****ed!
Click to expand...
Click to collapse
I guess so
I'm getting a mini-hdmi cable today to determine if the screen is broken, because i have the feeling that ***** is booting but not showing anything...But I'll have to send it to ASUS nonetheless. Has anyone ever sent a device in for warranty reasons with custom software (CWM, Custom ROM) on it? What kind of trouble will I have to face?

I'd say try it with the HDMI cable, see if you get anything up on it and if the touchscreen/everything else still works, see if you can get the latest official ROM on there, see if that fixes the problem.
If nothing else, you can then send it back with an official firmware on it.

Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps

Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.

sbirsen said:
Try holding the power button for 5-10 sec, then press power + volume down (might be volume up - try both) together for another 5-6 sec. You'll get to a reset screen where it asks you to confirm if you want to wipe everything. press volume down (I think!! - read the screen carefully) instead to boot normally.
hope this helps
Click to expand...
Click to collapse
Not possible since I installed CMW.
stuntdouble said:
Its 10+ seconds for a full power off by the way, nothing shorter than that. If you changed any system files either by flashing or by pushing via ADB then you will have invalidated your warranty. Unless you can restore it to the way it was before you fiddled with it, you'll have an expensive paperweight.
Click to expand...
Click to collapse
Big bummer And sadly there are no "ASUS Stores" around where I could use a stupid employee who has no clue and is convinced it's hardware related.
Well I don't have my HDMI cable by now and will try this first, but if that doesn't work:
Can someone give me a step-by-step how I can access the restore function of CWM without seeing anything on my device? I did a backup in CWM before installing the custom ROM. Perhaps tell me sth. like this: "press power+vol. down on start, then after approx. x seconds press vol up, wait a bit to make sure CWM started, press vol down twice, to go to recovery, ..."
And can someone do the same for the stock recovery to reset the device? Perhaps there's a chance that a failed OTA update deleted CWM an there's the stock recovery.
I know the chance to save it like this are small, but otherwise a lot of money is lost
Regards,
qwer23

On the flip side however, you could probably make some money by being the first to dismantle your device, and sell the photos of the internals to some website like iFixit. Then you could also sell it off as parts on eBay. Obviously it might take more effort than you are willing to give it, but at least it's another option.
If you do decide to open it up I would love to hear what mA rating the battery has on its label. Not being able to find out the actual proper rating from any site has been driving me nuts. I believe it's 6800mA but im not 100% sure.

[Q] S4 Broken Screen - ADB Not Working - Cannot Activate Debugging

Been trying for hours now to try and sort out an issue I am having. My S4 is damaged, the phone works but the screen and digitizer is broken. I want to check a few sms messages, access and control the phone from my PC and basically make a complete clone/image of my phone. I cannot for the life of my figure out how to do this.
I use windows 7, I have installed SDK tools, have ADB/fastbook etc. Device isn't found with ADB. Spent hours reading information about installing correct drivers, which I have done. No luck what so ever. The phone is not rooted, developers tools is not on, usb debugging is not on either.
I am starting to think this is a lost battle as I cannot sort this out.
Any ideas?
Thanks

Bump.
Anyone? Is there no way to solve this problem? Tearing my hair out.

Best bet (given ADB doesn't work) would be to root the phone & get a custom recovery on (via Odin; this is might be very difficult if you can't somehow have the phone & PC recognise each other - you don't need to have had debugging on though) then do a nandroid backup (someone using the same recovery/version might be able to walk you through the button presses.
What S4 variant (model number) are we talking about ?

MistahBungle said:
Best bet (given ADB doesn't work) would be to root the phone & get a custom recovery on (via Odin; this is might be very difficult if you can't somehow have the phone & PC recognise each other - you don't need to have had debugging on though) then do a nandroid backup (someone using the same recovery/version might be able to walk you through the button presses.
What S4 variant (model number) are we talking about ?
Click to expand...
Click to collapse
GT-I9505 is the model number that is displayed behind the battery. The screen is broke and so is the touchscreen (completely black). I tried to figure out via ODIN but that wouldn't recognise the phone either. I assumed you'd need to boot in recovery/download mode but because I cannot see anything on screen, when I do the volume down, home and power thing I do not know what to do next so the phone boots up normally. I know this because I have unread SMS and when phone loads my SMS tone goes off.
Really not sure how to get around this.

You're going to have to get it into DL mode somehow (don't need to use home button on S4, just vol down/power); try a jig. Once you've done that, then you need to get the phone & PC to recognise each other. If you're having problems with that, prepare to continue to do a lot more reading/trying stuff if you're having PC-side driver issues (there's a lot of threads on here re: the issue). There's also an 'Odin troubleshooting' guide in S2 General by Hopper8 which is worth looking at as much of the stuff he suggests also holds true for the S4 (except the firmware stuff, which is obviously different).
There's not going to be any quick & easy in this instance, I'm afraid. It's going to be hard work.
Edit - Also..USB board/port on the phone might also be damaged, so when you reach the point of having tried everything on the PC-side & everything you can possibly try on the phone-side, replace the USB board/port on the phone. This is quick/easy/cheap (<US$20) to do & might just enable you to get things done where everything else has failed.
Extra edit - And...A jig working (getting you into DL mode) or not is probably a good test of whether the USB board/port on the phone is still good; I.E if the jig works, the board/port is probably still good, if it doesn't, the board/port might be shot as well.

The USB is fine because when I plug the phone in when in normal boot it recognises the data storage. I will try to boot in DL mode. Are there any gestures my S4 will do when booting in DL? Vibrations? As I cannot see anything on screen that will indicate it's worked. I think that once I can get the phone to work with ODIN/ADB I will be good to go as I am relatively tech savvy.

Nope. You're going to by flying blind so far as having no screen/no vibrations in DL mode goes. You're going to be relying on the jig working, and once you hook it up to the PC & fire up Odin, you'll know straight away whether you've got a successful connection up & running (as screenshots in the many Odin guides on here will show you).

I see, will just have to keep trying.
So on the S4 it's hold power and volume up, then wait? or do I need to press anything else afterwards? Or is it power and volume down?
Thanks

No luck with download mode. Girlfriend has a note 2, and her method is Vol down, home and power button. Screen comes up almost immediately with confirmation. Volume up needs to be pressed to confirm. Tried to replicate with S4, no avail.

No luck with starting S4 in download mode. I have followed video on youtube. Supposed to be Vol Down, Home and Power button. Wait till vibrate and warning screen, then press up. Because I cannot see the screen I cannot see the warning screen. But I Hold for 4 seconds, release just after vibrate and then press up, but phone seems to boot up in normal mode.

Ok, finally in download mode, now what? I know it works because it installed new drivers and device manager states a samsung modem. Need to try and clone and do what I need to do ASAP and taking to store tomorrow to exchange for new one.
Any last minute ideas?
Thanks
ODIN3 v1.85 shows a yellow box, this is good right? I downloaded CWM from http://galaxys4root.com/clockworkmodtwrp-recoveries/
What do I need to do next, do not want to make this worse, I just need to enable usb debugging or at least be able to use adb, I am good to go from there

Only a few hours left? Surely someone knows what Flash I need to do to allow me adb access???

Right, go into recovery mode...adb now works.
What do I need to do to enable debugging?
Edit:
I can't get adb to work... error: closed
any ideas

If you cant get adb to work in recovery then youre out of luck.
Incase this happens with new phone, always have a remote access app like Cerberus installed. MightyText is a pretty nice app too.

I see, ok no worries. Thank you anyways

Stock Mi A1 locked on Fastboot screen

Ok, here's as much info as I can give as my phone is locked up:
Stock Mi A1 with 1st Oreo update: December patch level
I have not tried to load anything custom on it, nor have I even loaded the apps to do so.
I took my phone out of my pocket and it is locked on on a screen that says Fastboot.
Power button does not work. Long press power button does not work. Power+UP volume button does not work. Power+UP+DOWN volume buttons do not work.
Plugging the phone into the computer via USB port does nothing.
The battery is non-removable, so I can't pull it to reset.
I am at a complete loss as to what happened, why it happened, and how to resolve it. The phone was working fine this morning. I took it out of my pocket to use it and then discovered the issue. I live in Thailand, and there are no local service centers for Xiaomi, so hopefully someone will have an idea of how to fix the issue.
Any help, ideas or suggestions would be MOST appreciated!
Regards,
KB
UPDATE: I tried to restart the phone via the power button while it was plugged into the computer via USB. Holding the power button down for 10 seconds (guesstimate) did force a restart. This was NOT the case when not plugged in. In any event, if anyone has an idea of what happened and why, I would really like to know! I am wondering if there was some sort of long press key combo or something that happened while it was in my pocket.

Sorry for replying to my own post, but I am totally confused by this issue. I did a lot of searching and reading on Fastboot, and they ALL said that to get there, you had to enable Developer Tools on your phone, download a program for your computer, and then connect the phone via USB.
Here's the thing: I have a photo of the screen, so this is not some hallucination!
1) I DID NOT have Developer Tools enabled on the device. (I do now as I enabled it to see if it was already enabled...it wasn't)
2) I DID NOT download and install an ADB program for the computer.
3) I DID NOT (before the issue) connect the phone to the computer via USB.
So my question is how the h*ll did I get into Fastboot?????
This is really concerning as maybe Xiaomi has an issue similar to the root issue One Plus had and I happened to pocket dial the right combo???? In any event, it does not give me a warm fuzzy about what is going on behind the scenes here!
Any thoughts or info appreciated.
--KB

To get phone into fastboot mode you have to hold power off + volume down button. Might have happened in tight pocket.

_mysiak_ said:
To get phone into fastboot mode you have to hold power off + volume down button. Might have happened in tight pocket.
Click to expand...
Click to collapse
Thanks mysiak...in all my reading, nowhere was that mentioned! And yeah, it was in a pocket pressed up against a seat, so could easily have pocket dialed that combo.
Also, it is not easy to find the solution when it is locked there. I THOUGHT I had held the power off button long enough when trying to get out of Fastboot, but maybe missed it by a second or two. My solution was just to hold down the power button until the phone turned off. Whether that is the correct solution, I don't know as I still have not found anything about getting into and out of Fastboot without a computer.
Regards,
--KB

KB_Thailand said:
Thanks mysiak...in all my reading, nowhere was that mentioned! And yeah, it was in a pocket pressed up against a seat, so could easily have pocket dialed that combo.
Also, it is not easy to find the solution when it is locked there. I THOUGHT I had held the power off button long enough when trying to get out of Fastboot, but maybe missed it by a second or two. My solution was just to hold down the power button until the phone turned off. Whether that is the correct solution, I don't know as I still have not found anything about getting into and out of Fastboot without a computer.
Regards,
--KB
Click to expand...
Click to collapse
Power+volume down button is the usual way how to get into fastboot mode. From a PC you can type "adb reboot bootloader", but many prefer just using phone buttons combo (myself including). If you want to get out of fastboot, you either hold power off button until phone vibrates shortly - this works in whatever mode, even if powered on, basically it's "emergency shutdown" as we don't have removable battery. Or if you are connected to a PC, type "fastboot reboot".
Long story short, you did it right
Btw. if you will hold power+volume up combo long enough, you'll end in stock recovery mode with "no command" on the screen. Don't panic, just hold power off button and then start phone normally

I had the same problem and plugged into the computer via USB and holding the power button down for 10 seconds did force a restart. and the phone is OK since then!!! Thank you you saved my time!!!

Thank you.
Picked up my Mi A1 this morning and it had the beautiful FASTBOOT icon on the screen. The phone has been lying on my desk for several weeks without a SIM. When I could not clear the FASTBOOT message I Googled for a solution and this thread was the result. I just wanted to record my grateful thanks. I plugged the phone into a computer USB socket and held the power button until the error message disappeared, as recommended by KB_Thailand..
XDA doing what it aims to do.:good:

It is always nice to find solutions instead of even more questions. Glad that it helped!
After the initial glitches, the A1 has been pretty dang dependable.
I still am using my A1. The A2 and A3 (someone needs to be fired over that monstrosity) left me flat. I am hoping against hope that the A4 will be 'the one', otherwise I am going to have to look for something other than Xiaomi.