[Q] Rooting ZTE Blade - Blade General

Hello
I need some help to root my phone, i tried some guides but they seem to perhaps, be outdated. the z4 tool does not work, i cannot find the fishpig application. I tried the oneclick program, but only freezes. I cannot enter recovery mode, it freezes at FTM logo.
I've tried formating the phone several times, but not luck.
Thanks in advance.

Related

[Q][SOLVED] Bricked ZTE Libra

Hi! I have a bricked ZTE Libra (Sapo A5 in Portugal) and no mather how much I search for solutions I only seem to make things worse, so I was hoping someone here could help me.
Things started to go wrong after flashing a CyanogenMod rom. Everything worked except two things: I couldn't use anything that required my SIM card (so no phone or messaging) and I could not access the recovery screen (clockworkmod).
Without the recovery screen, I turned to ROM Manager but since it uses clockworkmod to do its work it didn't help.
Then I started trying other ways to recover my phone, until I tried ADB which allowed me a shell in my android. But then I broke it all by doing "wipe system" which cleaned my system of everything that was still working and left me with an expensive brick.
Now all I can do is boot until I see the green droid. If I don't press the volume buttons it goes into "device" mode and I can see it listed under "adb devices" but have no idea what to do with it.
If I press the volume button down to go into recovery mode it keeps flashing but never really goes anywhere.
If I press it up to go into the bootloader it stays the same and the only thing I can use to tell me something is different than the normal mode is that lsusb reports the vendor as "Google Inc." instead of what it reports in normal mode: "ONDA Communication S.p.A.".
With this I'm not even sure if I can get to the bootloader or not, but even if that is the bootloader, I have no idea what to do with it that might help me recover my phone.
By the way, I'm trying all this on Linux, although I could try solutions in Windows if required.
Can anyone tell me what can I do in this situation?
Ok, maybe my first post wasn't that easy to answer, so I'll make a simpler question to see if someone can help me.
What can be done at my android's bootloader? What is it for and what tools do I need to use to do it?
You could try installing ClockworkMod recovery using wbaw's guide here http://forum.xda-developers.com/showthread.php?t=1319257 Once that's installed you should be able to flash a new rom with it.
In bootloader mode you can flash a new kernel or recovery image using fastboot.
If you follow that guide that I wrote & Amphoras linked to then you should be able to get a working clockworkmod installed and then you can use that to flash a working rom, or restore a backup.
Thank you both, I'll try what you said as soon as I can and then I'll let you know if it worked!
Ladies and gentleman, today a miracle happened, my ZTE came back from the dead!
Apparently the problem was that I installed some GEN2 applications on my GEN1 model.
I found this while reading the tutorial you suggested, after which I upgraded my ZTE to GEN2 which allowed me to slowly recover everything else.
So, I have to say, thank you very much, and I hope I won't need your help again anytime soon! xD

Can't unbrick Optimus l5

Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
It's bootloop. When I had L5 I had the same problem after flashing bricked phone via KDZ.
Do hard reset with key combination. It worked for me. Phone will boot up few minutes.
LeoFalto said:
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
Click to expand...
Click to collapse
I was forced to do a hard reset...that sucks but it had to be done.
Thank you.
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
aeoros said:
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
Click to expand...
Click to collapse
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
nastase.alex said:
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
Click to expand...
Click to collapse
nop, it's like the device is dead,
Have you tried it:
Hold together volumn (-) + home button, then turn the power on
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
so there is no solution to this brick???
aeoros said:
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
Click to expand...
Click to collapse
Quote:
Originally Posted by breakercris
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice
Did you try emergency mode? (volume up + volume down + power button)
If not, see if you can enter it and then flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher).

[Q] Stuck at security error

Hi everybody!
I have Lg g2 D802 Baltics. Yesterday I tried to return to Stock KitKat via Lg mobile support tool and Flashtool, both of them didn't work, they just didn't find my phone in download mode. Then I decided to reroot and reinstall TWRP. The first was done and the second too, but unfortunately my phone restarted and got a Security error and LG logo and can't boot, just permanently restarts. I've already read a hundreds of articles like http://forum.xda-developers.com/showthread.php?t=2432476 . The method written here isn't working for me because the Flashtool just can't find my phone when trying to install a firmware. So, any program like Lg support tool and Flashtool don't find my phone, so I can't do anything with my phone to get it to work. I'm facing i real problem for me and i'm quite shocked. So, please, tell me what to do, how to fix my phone. I tried a lot of thins, nothing helped. What to do?

[Q] Help needed. Bricked LG G2, when google didn't help!

Good day fellow XDA users!
I've been playing with my old LG G2, and as you could have guessed - bricked it (while trying to instal Android L ROM)
The problem: The phone is not booting further the LG logo.
I've tried:
1. Doing a hard-reset, didn't work. After getting to the hard-reset screen - I double-confirm the reset and then nothing happens (waited for about an hour and a half).
2. Entering download-mode, didn't work. It shows the "download mode" logo but nothing happens.
3. Connecting to PC, fast-boot, adb of LG Tool can't "see" the device.
Any suggestions?
Thanks in advance
Anyone?
Your phone boots in fastboot?..or it's only stuck on LG logo?..if you can boot in fastboot then there are some threads around here about how to recover...but if you are stuck at LG logo i don't know.. I hope somebody more experienced will help you.
Nope, I didn't manage to get it to load fastboot.
skamenetskiy said:
Good day fellow XDA users!
I've been playing with my old LG G2, and as you could have guessed - bricked it (while trying to instal Android L ROM)
The problem: The phone is not booting further the LG logo.
I've tried:
1. Doing a hard-reset, didn't work. After getting to the hard-reset screen - I double-confirm the reset and then nothing happens (waited for about an hour and a half).
2. Entering download-mode, didn't work. It shows the "download mode" logo but nothing happens.
3. Connecting to PC, fast-boot, adb of LG Tool can't "see" the device.
Any suggestions?
Thanks in advance
Click to expand...
Click to collapse
Were you able to resolve your issue? I just had the same thing happen with mine and trying to find a solution.
mguelph said:
Were you able to resolve your issue? I just had the same thing happen with mine and trying to find a solution.
Click to expand...
Click to collapse
Hello, sorry it took some time to answer, but here (original post can be found here http://androidforums.com/threads/he...when-google-didnt-help.900687/#post-6874443):
FIXED!
I followed the steps and it worked!!!
1. http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 this liknk helped connecting it to PC.
2. http://forum.xda-developers.com/showthread.php?t=2582142 this link helped me flash the partitions, well actually not, because I didn't have a linux machine next to me. So I found this http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627, which is really a walk in a park, just download and run the file.
Anyhow, now my phone works!
Special thanks to
iowabowtech

HELP Hard Bricked Phone

hey there
i have G2 D802
when ive tried to go back to stock using the LG flash tool, it gave an error of connection.
ive tried it couple of times with no luck
then the phone was totally bricked
when i boot the phone its showing the LG logo, then i have a black screen.
in windows it would recognized as a multiple drives, in linux (arch) it doesnt recognize
ive tried every method ive seen, but non helped cause i cant access recovery nor download mode.
can any one help me?

Categories

Resources