I loked cant find the answer
Im curently on MJ7 trying to update to MJE
I downloaded the correct files
When I'm in odin, I select ap. I cant find the file i downloaded.
My question is do I need to rename the file??????
jprovan1 said:
I loked cant find the answer
Im curently on MJ7 trying to update to MJE
I downloaded the correct files
When I'm in odin, I select ap. I cant find the file i downloaded.
My question is do I need to rename the file??????
Click to expand...
Click to collapse
You need to unzip ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5 first and then the md5 file will be there. It's a 7zip file. I did the same thing.
Related
hey guys where I get a .TAR file ? or convert a .zip to .tar.
I have my pit file just dont seem to know what to do with the .tar file.
Im used to restore.flashing my phone via .zip thats all.
Can I just take my .zip rom I want and convert to .tar
what is it that you wanted to do in the first place? samfirmware has copies of the regional firmwares (.tar files) if you want them.
.tar is another form of archive. You need to read this fully:
http://forum.xda-developers.com/showthread.php?t=723596
I also recommend you search Youtube for some videos of the process too. Odin flashing is not the same as a .zip update from SD Card, and honestly if you are unfamiliar with what a tar-ball is you may not be up for what using Odin entails. You have a very real risk of bricking your phone through a mistake.
Read, read again, be sure, flash!
i am having this prob i have lost wifi on my gs i337m it was rooted i tried to install stock rom for telus it says it install but im still rooted imusing this file is this correctC:\Users\Ronald\Downloads\KERNEL-TLS-I337MVLUAMG1-1372666261.tar i have been trying for 4 hours nows helllp
That's not the complete firmware. Go to sammobile.com. You'll download a zip and extract the .tar.md5 file from it. You'll flash that in Odin.
loi
jd1639 said:
That's not the complete firmware. Go to sammobile.com. You'll download a zip and extract the .tar.md5 file from it. You'll flash that in Odin.
Click to expand...
Click to collapse
thanks for the help got it
About to do a warranty on my Galaxy Note 3 for VZW but I had it rooted with kingo and safetrap installed I removed safetrap and wanted to know what else I need to look and do to ensure that is back to stock and not recognized as modified as well as where do I go to determined everything is ok onces all is done. Appreciate the help:silly:
Wrote this previously for another post, but once you flash the .tar file, you'd be pretty much as stock as stock can be:
-------------------------------
I used Odin v3.09
Downloaded the .zip file in az_biker's post here:
http://forum.xda-developers.com/show....php?t=2543386
Extracted the .zip file to get the .tar file
Opened Odin.
Click the AP button.
Browsed to folder containing .tar file and clicked Start.
Sit back and let it do it's thing.
When it's done, you've updated your phone to JE
hctimin said:
Wrote this previously for another post, but once you flash the .tar file, you'd be pretty much as stock as stock can be:
-------------------------------
I used Odin v3.09
Downloaded the .zip file in az_biker's post here:
http://forum.xda-developers.com/show....php?t=2543386
Extracted the .zip file to get the .tar file
Opened Odin.
Click the AP button.
Browsed to folder containing .tar file and clicked Start.
Sit back and let it do it's thing.
When it's done, you've updated your phone to JE
Click to expand...
Click to collapse
So as long as on download mode shows Knox 0x0 I'm good right?
Jun1orV said:
So as long as on download mode shows Knox 0x0 I'm good right?
Click to expand...
Click to collapse
Correct. Also make sure that it says samsung official firmware, which is will if you are successful.
♢NoteIII♢
Thanks everything was succeful
Can someone please point me to best instructions on how to revert NC2 back to MJE. And how to root MJE. Thanks
Go to android development section.
Find dutchdogg54 post with the firmwares.
Download the mje rooted odin file.
Or download the mje stock unrooted file.
Extract the file.
It will not be a .md5
Place the file in the pda section within the odin application (on computer)
*side note- do not press anything other than the pda button in odin. You will destroy your phone*
Put phone in download mode.
Make sure odin sees your phone in the COM ports and then you can hit start.
It will auto reboot. And you're good to go.
Odin versions do not matter
barrackOBAMA said:
Find dutchdogg54 post with the firmwares.
Click to expand...
Click to collapse
Here's that link...
Thanks, this clears things up.
barrackOBAMA said:
Go to android development section.
Find dutchdogg54 post with the firmwares.
Download the mje rooted odin file.
Or download the mje stock unrooted file.
Extract the file.
It will not be a .md5
Place the file in the pda section within the odin application (on computer)
*side note- do not press anything other than the pda button in odin. You will destroy your phone*
Put phone in download mode.
Make sure odin sees your phone in the COM ports and then you can hit start.
It will auto reboot. And you're good to go.
Odin versions do not matter
Click to expand...
Click to collapse
You said to download the "mje rooted odin file". I am unable to locate that file, do you have a link for that?
ShaunWinSC said:
You said to download the "mje rooted odin file". I am unable to locate that file, do you have a link for that?
Click to expand...
Click to collapse
It's listed here under Stock 4.3 Files.
acdnykon said:
It's listed here under Stock 4.3 Files.
Click to expand...
Click to collapse
"ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_lo w_ship_MULTI_CERT.tar.md5" has root access already?
ShaunWinSC said:
"ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_lo w_ship_MULTI_CERT.tar.md5" has root access already?
Click to expand...
Click to collapse
As I did not post these files, you'd have to go to the source to find out. But from reading what it says in the thread, this is strictly a STOCK only version of 4.3. Unless it specifically states otherwise, I would take this to mean that this is NOT a rooted version of this stock file. Get in touch with dutchdogg54 to make sure, but I'm going to have to say no that it's not a rooted 4.3 rom.
Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
When i look into it it has only one file .tar.md5
i tried to extarct it using winrar and it says file is corrpted
\BTU-N910FXXS1DQFA-20170726090446.zip: The archive is corrupt
Although it extracted the N910FXXS1DQFA_N910FBTU1DPL1_N910FXXS1DQA1_HOME.tar.md5
In both files i got the same result same
i dont know what to do now
I tried Odin and it stuck at "there is no pit file partition" or something like that
(yes i wiped out cache and system delvik etc.)
I also tried inserting PIT file but no luck
i would prefer without Odin if possible
As I can go into TWRP recovery
Please guide me or at least answer a few question
1. Is it even possible to flash stock rom using twrp like i flash other roms?
2. Can i install extracted .md5 file from that zip? will it be the same like stock zip?
3. Why my Both zip files are corrpted? your opinion?
4. Should i download again same stock rom?
5. Can / Should i flash or download and /or downgrade Stock firmware (same 6.0.1 )but different release date?
6. Am i downloading the right firmware for my device here is my device details posted??
Lot of confusion please help i want to go back to stock for my gear VR
Based on the amount and type of questions, I believe you need to read up on basic Note 4 flashing/customization knowledge first. Go and read up on the stickies.
Without knowledge and experience, we can tell you how to do a brain surgery, but doesn't make you a surgeon.
No, twrp cannot be used to flash stock rom. Stock rom are most of the time md5 files, used by ODIN only.
Since you downloaded the zip files, use the "Test" function to see if it is corrupted?
Maybe you should just flash a stock based custom rom with VR and be done with it.
https://forum.xda-developers.com/no...om-bob4-devbase-multi-csc-safe-bloat-t3033881
---------- Post added at 01:13 PM ---------- Previous post was at 01:05 PM ----------
Oh, according to your screen shots, DBT is in a carrier in Germany?
I installed BTU (UK) stock rom and it is is working fine (using odin)
nicholes said:
Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
==================================================
Check your Winzip version. It may be old and doesnt handle large zipfiles too well. I had the same problem but I know the file was good as I downloaded it at work, and Winzip worked just fine; but when I got home, winzip failed on my pc - old 8.1 version. I used the trial version just fine to unzip.
Click to expand...
Click to collapse
Flashing Rom
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.
Fool2242 said:
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.
Click to expand...
Click to collapse
As far as I remember it was zip file