4.4.2 Odin update failed, need PIT file? - Galaxy Note 3 Q&A, Help & Troubleshooting

Tried to install the polish 4.4.2 official polish update and failed.
Tried the 4 file unofficial 4.4.2 update as well, but that's failed too.
Phone shows PIT FAIL : TOTAL SECTORS (930777344)
Can anyone help me with a PIT file that I could use to fix this?
Phone is stuck at the initial screen that says Samsung Galaxy Note 3 SM-N9005
In recovery mode, there is a message at bottom that says E: failed to mount /system (invalid argument)
Please help! :crying: :crying: :crying: :crying: :crying: :crying: :crying:

Here ,
https://www.dropbox.com/s/83yop0y64ozt4vt/My-N9005.pit
Pit file credits @mirek190 , please after you done share your experience is it fix ... and how
Sent from my SM-N9005 using Tapatalk

newstar said:
Here ,
https://www.dropbox.com/s/83yop0y64ozt4vt/My-N9005.pit
Pit file credits @mirek190 , please after you done share your experience is it fix ... and how
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
:crying::crying::crying:
Tried the PIT file. But still PIT FAIL. Wiped data/factory reset and Wipe cache partition before that.
Odin Log:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
:crying::crying::crying::crying:

Wait 30 minutes will upload kitkat pit file
Sent from my SM-N9005 using Tapatalk

newstar said:
Wait 30 minutes will upload kitkat pit file
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thank you!

https://www.dropbox.com/s/a2mftk3b2vcwh5q/HLTE_EUR_OPEN.pit
Here is kitkat pit please must share your progress
Thanks
Sent from my SM-N9005 using Tapatalk
---------- Post added at 11:14 PM ---------- Previous post was at 11:14 PM ----------
rinuvimal said:
Thank you!
Click to expand...
Click to collapse
https://www.dropbox.com/s/a2mftk3b2vcwh5q/HLTE_EUR_OPEN.pit
Must share your progress
Sent from my SM-N9005 using Tapatalk

newstar said:
https://www.dropbox.com/s/a2mftk3b2vcwh5q/HLTE_EUR_OPEN.pit
Here is kitkat pit please must share your progress
Thanks
Sent from my SM-N9005 using Tapatalk
---------- Post added at 11:14 PM ---------- Previous post was at 11:14 PM ----------
https://www.dropbox.com/s/a2mftk3b2vcwh5q/HLTE_EUR_OPEN.pit
Must share your progress
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thank you.
Re-Partition operation failed again:crying::crying::crying:.
I tried with the multi file 4.4.2. Downloading the single file 4.4.2 now. Will try with that and update you.

You select erase nand or not
Sent from my SM-N9005 using Tapatalk

newstar said:
You select erase nand or not
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
No I did not. Should I?
Auto reboot Re Partition and F Reset Time selected.
PIT, BL, AP, CP and CSC files loaded.

Yes try but if it works then after rom installed you have to reset/wipe factory to format new partition
Sent from my SM-N9005 using Tapatalk

newstar said:
Yes try but if it works then after rom installed you have to reset/wipe factory to format new partition
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Tried selecting Nand erase all.
Same error again. Re-partition operation failed.:crying:

Try with official poland file in AP ...
Sent from my SM-N9005 using Tapatalk

newstar said:
Yes try but if it works then after rom installed you have to reset/wipe factory to format new partition
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Should I try selecting any of these : Phone Bootloader update, Phone EFS clear, Flash Lock, LED Contral, T Flash?
I dont want to hard brick my phone, so being very very careful.

Nooo phone Efs clear it will hard brickkkkk as it delete imei info
Just do enable phone bootloader update , nand erase(if using pit) and auto reboot
Sent from my SM-N9005 using Tapatalk
---------- Post added at 11:47 PM ---------- Previous post was at 11:40 PM ----------
Try enable bootloader update , auto reboot and nand clear *if using pit file) otherwise ask your problem in general forum thread official kitkar for n9005 to @ValenteL may be helps
Sent from my SM-N9005 using Tapatalk

newstar said:
Nooo phone Efs clear it will hard brickkkkk as it delete imei info
Just do enable phone bootloader update , nand erase(if using pit) and auto reboot
Sent from my SM-N9005 using Tapatalk
---------- Post added at 11:47 PM ---------- Previous post was at 11:40 PM ----------
Try enable bootloader update , auto reboot and nand clear *if using pit file) otherwise ask your problem in general forum thread official kitkar for n9005 to @ValenteL may be helps
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks newstar. I am trying with the PIT. Just to clarify:
Enabling:
1. Auto Reboot
2. Re-Partition
3. F Reset Time
4. Nand Erase All
5. Phone Bootloader update

Yes ..
Sent from my SM-N9005 using Tapatalk
---------- Post added at 12:07 AM ---------- Previous post was at 12:04 AM ----------
If still no success then read
A lot user get recover from it
Read in detail dont sure ur problem is same or not
http://forum.xda-developers.com/showthread.php?t=2507403
Sent from my SM-N9005 using Tapatalk

newstar said:
Yes ..
Sent from my SM-N9005 using Tapatalk
---------- Post added at 12:07 AM ---------- Previous post was at 12:04 AM ----------
If still no success then read
A lot user get recover from it
Read in detail dont sure ur problem is same or not
http://forum.xda-developers.com/showthread.php?t=2507403
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thank you.
I tried official Poland 4.4.2
No more recovery. :Shows Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
When in download mode and installing, it now stops at ext4 and says "Odin: Invalid ext4 image"
ODIN Log:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
:crying::crying:

rinuvimal said:
Thank you.
I tried official Poland 4.4.2
No more recovery. :Shows Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
When in download mode and installing, it now stops at ext4 and says "Odin: Invalid ext4 image"
ODIN Log:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
:crying::crying:
Click to expand...
Click to collapse
Change your version of ODIN - Drop down to 3.04 or 3.07 or even 1.85
Grab the leaked firmware from my signature, try and install it via ODIN. Report back what it says.
[OT]
I'm a little concerned with the amount of people experiencing this Ext4 Fail, seen quite a few post today alone about this and have tried to replicate and fix the error myself with no luck.

What options u selected ? And try boot into recovery reset /wipe and then in download mode try process again
Btw what is ur phone region also try ask @ValenteL
Sent from my SM-N9005 using Tapatalk

Only hongkong note owner getting effected , u try google pit file for n9005 honghong and use it
Download ur generic latest firmware .. and extract tar remove bootloader files and pack it and flash
May be this works
Sent from my SM-N9005 using Tapatalk

Related

[Q] Bricked Galaxy s4 l720 Please Help

so I am stuck on a bootloop and i am trying to go back to stock using odin but when i try to i get this message
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Please help Ive been trying to find a fix but can't
You must be on 4.3 and are trying to Odin a 4.2.2 ROM like MDC MDL or MF9 which is impossible at the monent. Odin a MJA tar and you will be fine.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
You must be on 4.3 and are trying to Odin a 4.2.2 ROM like MDC MDL or MF9 which is impossible at the monent. Odin a MJA tar and you will be fine.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Do you have a link for one ?
Xcarlitos00X said:
Do you have a link for one ?
Click to expand...
Click to collapse
How did I know that was coming.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 03:09 PM ---------- Previous post was at 03:08 PM ----------
http://www.rwilco12.com/downloads.p...axy S4 (SPH-L720)/Stock ROMs/MJA/Original TAR
Sent from my SPH-L720 using Tapatalk

[Help] Soft Bricked Samsung Galaxy S4 GT-i9507

Hey guys,
I've recently bricked my Samsung Galaxy S4. After countless hours, nights of searching I couldn't find a way to remove out of the softbrick state. So the only thing I'd do is post here. Okay, so here how I soft bricked my S4.
I've rooted my S4 using odin, and then when I rooted I installed a 4.4.4 rom. My original rom was TouchWiz 4.4.2. Now I'm tyring to get back to touchwiz, but each time I do so through I get an error message saying:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what to do. I've tried using other usb ports, and I used this file (downloaded from sam-mobile) to flash
I9507XXUENB5_I9507OPSENB5_I9507XXUENB5_HOME
Edit:
Forgot to add that I can't access CWM or any other recovery menu or boot into the OS.. Any help is appreciated greatly.
Anyone? /cryyy
hey
try another odin version with pit file
install samsung keys to ensure you have all drivers
---------- Post added at 04:50 AM ---------- Previous post was at 04:47 AM ----------
monteiro-ribas said:
hey
try another odin version with pit file
install samsung keys to ensure you have all drivers
Click to expand...
Click to collapse
THE firmware you are trying is 4.3, you won't be able do dowgrade to 4.3
this is the correct version
http://www.sammobile.com/firmwares/download/43154/I9507XXUFOA1_I9507OPSFOA1_OPS.zip
Can you get in download mode? Is the device booting? If you can get in download mode you can flash the firmware in the link from post 3. with Odin

Upgraded to BOE1, tried to flash an old kernel, now I'm boot looping

Hello,
Yesterday I upgraded to BOE1 on my SM-G900V and tried to flash an older kernel and now I'm stuck in a boot loop. I've tried flashing various stock kernels in Odin but when I do I get this message...
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
and my Phone says: SW REV CHECK FAIL: (aboot) Fused 2 > Binary 1
Also, I only have the default system recovery and I've tried the factory reset with no luck. Everything else I've tried by searching the forums has not worked so far (usually due to the above error or because I only have the default system recovery), any help would be greatly appreciated. Thanks.
ChopperDave2007 said:
Hello,
Yesterday I upgraded to BOE1 on my SM-G900V and tried to flash an older kernel and now I'm stuck in a boot loop. I've tried flashing various stock kernels in Odin but when I do I get this message...
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
aboot.mbn
NAND Write Start!!
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1
and my Phone says: SW REV CHECK FAIL: (aboot) Fused 2 > Binary 1
Also, I only have the default system recovery and I've tried the factory reset with no luck. Everything else I've tried by searching the forums has not worked so far (usually due to the above error or because I only have the default system recovery), any help would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
Try flashing a KitKat full retail tar in odin.
https://www.androidfilehost.com/?fid=23991606952607143
There is another thread on here and no one is sure if you can still downgrade from this update. If you can then you just re-root KitKat and go from there
aholeinthewor1d said:
Try flashing a KitKat full retail tar in odin.
There is another thread on here and no one is sure if you can still downgrade from this update. If you can then you just re-root KitKat and go from there
Click to expand...
Click to collapse
It failed with the same Odin error message
ChopperDave2007 said:
It failed with the same Odin error message
Click to expand...
Click to collapse
Likely have to wait for the odin flashable OCE tar then...looks like they blocked the ability to downgrade
Sent from my SM-G900V using Tapatalk
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
Have you tried full lollipop tars also? Not just kernels
Sent from my SM-G900V using Tapatalk
aholeinthewor1d said:
Likely have to wait for the odin flashable OCE tar then...looks like they blocked the ability to downgrade
Sent from my SM-G900V using Tapatalk
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
Have you tried full lollipop tars also? Not just kernels
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Oh bummer, any rough guess on how long that could take? It'd be nice to have a phone again haha
ChopperDave2007 said:
Oh bummer, any rough guess on how long that could take? It'd be nice to have a phone again haha
Click to expand...
Click to collapse
Flash this:
G900V_OE1_Stock_Kernel
muniz_ri said:
Flash this:
Click to expand...
Click to collapse
That totally worked! Thanks, you're a life saver!
Is there a way to root BOE1? Like flash older kernel then root then flash kernel above.?
I am unable to flash anything cause footer is wrong and I have a verification error. When phone boots it hangs at setup wizard.

My Galaxy S4 says "Not Registered on Network"

Ever since I upgraded from 4.2.2 to 5.0.1(via Odin) the phone kept saying to activate the device, after that I downgraded to 4.4.2 and now it is not registered on network tried to flash different basebands none of them worked, some of them even nulled the IMEI so i had to flash 5.0.1 baseband to get the IMEI back, now I'm stuck with no network.
I would appreciate your help.
Thanks.
http://forum.xda-developers.com/showthread.php?p=63653500
Enviado do meu GT-I9505 através de Tapatalk
---------- Post added at 06:20 PM ---------- Previous post was at 06:20 PM ----------
Flash modem xxuhoj2 with odin
Enviado do meu GT-I9505 através de Tapatalk
Can't flash it.
It says:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I have i9500 version BTW
Is I9500 the model number given in the download mode screen?
Strephon Alkhalikoi said:
Is I9500 the model number given in the download mode screen?
Click to expand...
Click to collapse
Yes and on the back of the phone(under the battery slot)
Ok. Just wanted to be sure you didn't have a frankenphone. If your IMEI is intact, flash the ROM again, as sometimes it takes more than one flash before you get everything working properly.

recovery problem in n9oo

i have a 32 gb n900 phone that with official lolipop that i was put it from sammobile.com and flash it by odin, then i tried 2 do a root with odin but it is not succes so i do it by kingo root
now, i need to flash a xda's developer Rom 2 my mobile by odin but there are a problem in odin to flash recovery !!!
i tried 2 use a varity of recoveries but it is not useful
it (odin) present that the recovery is failed with red and give
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plz help because every things i did 2 make a recovry is unsuccedes
Then turn off reactivation lock
Sent from my GT-N7000
Rosli59564 said:
Then turn off reactivation lock
Sent from my GT-N7000
Click to expand...
Click to collapse
then after what ???
and how can I do this ??
As far as I remember reactivation locked is only available in KK. Not sure with Lollipop. I'm not with stock Lollipop for long. Some more my phone has just broke so I couldn't tell more about it.
Sent from my GT-N7000
Did you Troy different USB cables and USB ports?
I have reactivation lock on note 3 n900w8 so maybe some versions of note 3 have the lock in lollipop.

Categories

Resources