Hey guys,
I've recently bricked my Samsung Galaxy S4. After countless hours, nights of searching I couldn't find a way to remove out of the softbrick state. So the only thing I'd do is post here. Okay, so here how I soft bricked my S4.
I've rooted my S4 using odin, and then when I rooted I installed a 4.4.4 rom. My original rom was TouchWiz 4.4.2. Now I'm tyring to get back to touchwiz, but each time I do so through I get an error message saying:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what to do. I've tried using other usb ports, and I used this file (downloaded from sam-mobile) to flash
I9507XXUENB5_I9507OPSENB5_I9507XXUENB5_HOME
Edit:
Forgot to add that I can't access CWM or any other recovery menu or boot into the OS.. Any help is appreciated greatly.
Anyone? /cryyy
hey
try another odin version with pit file
install samsung keys to ensure you have all drivers
---------- Post added at 04:50 AM ---------- Previous post was at 04:47 AM ----------
monteiro-ribas said:
hey
try another odin version with pit file
install samsung keys to ensure you have all drivers
Click to expand...
Click to collapse
THE firmware you are trying is 4.3, you won't be able do dowgrade to 4.3
this is the correct version
http://www.sammobile.com/firmwares/download/43154/I9507XXUFOA1_I9507OPSFOA1_OPS.zip
Can you get in download mode? Is the device booting? If you can get in download mode you can flash the firmware in the link from post 3. with Odin
Related
No matter what version of odin and the file I am flashing I get this error:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone is not working at all. I put hyperdrive rom on my phone but it had some issues so I needed to go back to stock. But when I tried to use kies to get me to stock, it gave me an error and now I have a "Firmware upgrade encountered an issue." It is stuck at download mode. Can someone help with this?
Which rom versión are you trying to flash?
moiramd said:
Which rom versión are you trying to flash?
Click to expand...
Click to collapse
Im not trying to flash a rom. The rom I was on was the newest one. I'm trying to flash stock. The problem is that I tried to use Kies and it did not work. Now I am stuck on the "Firmware upgrade encountered an issue." When I try to use odin to flash stock it gives me the same error code.
The newest stock rom is an update. Flash the stock NB1 first you can find it here http://forum.xda-developers.com/showthread.php?t=2616221 then flash the newest update NC1
---------- Post added at 09:24 AM ---------- Previous post was at 09:23 AM ----------
Sorry NI1
good day ,
anyone can help me with installing stock version of android 4.3 version on my GS4 ?! i have problem while using odin v3.09 to flash my Galaxy s4 i9505 to stock firmware version 4.3 with the md5 file downloaded from sammobile.com , here is some info about my phone :
having CWM recovery installed
running on custom ROM CM11 4.4.4
error message in odin is as below :
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
micphone7 said:
good day ,
anyone can help me with installing stock version of android 4.3 version on my GS4 ?! i have problem while using odin v3.09 to flash my Galaxy s4 i9505 to stock firmware version 4.3 with the md5 file downloaded from sammobile.com , here is some info about my phone :
having CWM recovery installed
running on custom ROM CM11 4.4.4
error message in odin is as below :
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sbl1.mbn
NAND Write Start!!
sbl2.mbn
sbl3.mbn
rpm.mbn
aboot.mbn
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Download the official firmware of your country and carrier from samobile.Com and flash with odin
This will flash stock firmware and stock recovery
Sent from my GT-I9505 using Tapatalk
1eyedmonster said:
Download the official firmware of your country and carrier from samobile.Com and flash with odin
This will flash stock firmware and stock recovery
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I just bought it from thailand !
micphone7 said:
I just bought it from thailand !
Click to expand...
Click to collapse
You wont be able to flash 4.3 if youre on 4.4.2
"If someone helps, never forget to hit thanks ? "
As the title says, I tried to downgrade from lollipop 5.0 to 4.2 because I've had several issues and I also wanted to get root. I think part of my mistake was I wiped data/factory reset before I flashed AP. Any help would be much appreciated, as I have been at this for the past five hours. I added some info below that might help below. Thanks
- I cannot boot into recovery and get the message (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again)
- CP is the only thing that will flash and CSC also fails
- model number is g900a AT&T
- I have used Odin 3.10.7 and 3.09, but no luck
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persist.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk
Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies
VoltexYT said:
Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies
Click to expand...
Click to collapse
Kies and kies3 are both not recognizing my device. I heard it could be because of usb debugging, but I can't boot into my phone to check.
Allek84 said:
Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Both kies and kies3 are not recognizing my device.
Hello I recently rooted my phone on 5.1.1 (Lollipop) and everything went well no issues till last night when I tried to install xposed installer and ended up soft bricking (I think) my phone, where it will turn on to the samsung s6 edge + logo and just sit there and won't go any further. I found out how to flash to the original firmware using Odin 3.10.7 and with the stock firmware file.
now I put my phone into download mode and connect it to Odin, put the firmware file into the AP section and hit start.
Once I hit start I get a fail message and this :
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different firmwares from different sites, different odin verions, USB ports please help
I tried uploading pictures and links to the firmware I used but apparently I need 10 posts before that so if you want to know anything else in order to help please ask.
am non rooted trying to flash a different firmware and I get the same. I remove the OEM lock but cannot flash anything
odin 3.10.7 works
You write SM-G925W8 that´s S6 Edge, not S6 Edge+!!! Try firmware for SM-G928W8!
Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed
Michel93 said:
Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed
Click to expand...
Click to collapse
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again
Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.
Michel93 said:
Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.
Click to expand...
Click to collapse
as long as you can get to download mode, youre in good shape. From there, its merely a try-and-fail process of different Odin and firmware versions
Ty I was getting pretty despred after hours of fails and disappointment
Michel93 said:
Ty I was getting pretty despred after hours of fails and disappointment
Click to expand...
Click to collapse
it can get that way especially if youre downloading your firmwares from sammobile.com/firmwares directly. Takes FOREVAAAAAAR and then when it fails it gets SUPER irritating. Get the Frija firmware download tool here and the speed difference will blow you away. There is another firmware download tool out there too and i have it on my computer at home, but i cant remember what its called and the Frija tool is as good as that other tool anyways.
youdoofus said:
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again
Click to expand...
Click to collapse
got the same problem with 13.1
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5582 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.
Michel93 said:
HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.
Click to expand...
Click to collapse
right on, right on! yeah if you can get to download mode, youre usually good. From there its just getting the right Odin/firmware combo. Same holds true on 90%+ of most newer samsung phones