Related
I tried everything to cause the device to be successful choose network .. unable to select network
I saw someone wrote that EFS can burn through ODIN has done this and I deleted the IMEI
It should be noted that at first I did back up through NITRALITY and I'm now doing RESTORE through NITRALITY.. not helpful
I also made a backup of titanium and I have all the backup on the computer just have not the foggiest how to recover the IMEI if he backed it at all
Help anyone?
ShiloBeidany said:
I tried everything to cause the device to be successful choose network .. unable to select network
I saw someone wrote that EFS can burn through ODIN has done this and I deleted the IMEI
It should be noted that at first I did back up through NITRALITY and I'm now doing RESTORE through NITRALITY.. not helpful
I also made a backup of titanium and I have all the backup on the computer just have not the foggiest how to recover the IMEI if he backed it at all
Help anyone?
Click to expand...
Click to collapse
Try downgrade to oldest Froyo or eclair ROM with bootloader
use ODIN
Select PIT (usually 512)
Select BOOTLOADER (BOOT)
Select PDA (CODE)
Select PHONE (MODEM)
Select CSC (CSC)
If "Re-Partition" is not checked under "Option", check it.
Fire it up, after that IF NO IMEI, you can just restore with Nitrility
xsenman said:
Try downgrade to oldest Froyo or eclair ROM with bootloader
use ODIN
Select PIT (usually 512)
Select BOOTLOADER (BOOT)
Select PDA (CODE)
Select PHONE (MODEM)
Select CSC (CSC)
If "Re-Partition" is not checked under "Option", check it.
Fire it up, after that IF NO IMEI, you can just restore with Nitrility
Click to expand...
Click to collapse
Thanks , I don't know how to downgrade to froyo or eclair .. i found this guide : http://forum.xda-developers.com/showthread.php?t=734871
but all the links are dead . i'll be glad to some help
ShiloBeidany said:
Thanks , I don't know how to downgrade to froyo or eclair .. i found this guide : http://forum.xda-developers.com/showthread.php?t=734871
but all the links are dead . i'll be glad to some help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1102881, select according to your location , you can also try http://www.samfirmware.com/
Thanks man , when i worked like the guide say with the one click odin i stucked with boot screen of at&t and i can't get even download mode.. i lost , what can i do >
ShiloBeidany said:
Thanks man , when i worked like the guide say with the one click odin i stucked with boot screen of at&t and i can't get even download mode.. i lost , what can i do >
Click to expand...
Click to collapse
First that guide is meant for captivate, its another version of Galaxy S, all you needed to do was flash using Odin3...thats why I showed you where to get firmware it had complete instructions for flashing
OK, First pull out the battery from your phone , remove, EXT SD card as well as Sim Card and try to get into download mode,
Sorry I was just so tired I did not read right..
Even after I did everything this device is still stuck in at&t bootscreen..
thanks!
Hello everyone,
I am trying to fix my IMEI on SGS3 but without success. I cannot select RMNET+DM+MODEM in hidden menu (*#7284#). On UART there is only (MODEM, PDA) and USB (MODEM, PDA).
I've even tried SGS3-Exploiter-GeeK.exe but when I select this mode nothing happend, it just goes back to MTB+ADB.
TNX
http://forum.xda-developers.com/showthread.php?p=31051731
exploit20 said:
Hello everyone,
I am trying to fix my IMEI on SGS3 but without success. I cannot select RMNET+DM+MODEM in hidden menu (*#7284#). On UART there is only (MODEM, PDA) and USB (MODEM, PDA).
I've even tried SGS3-Exploiter-GeeK.exe but when I select this mode nothing happend, it just goes back to MTB+ADB.
TNX
Click to expand...
Click to collapse
try using HC-kTools app from play store...
Dehaani thank you but I know already for that thread... I cannot enter that diag mode... :/
and don't have backup to restore using hc-ktool
dehaani said:
http://forum.xda-developers.com/showthread.php?p=31051731
Click to expand...
Click to collapse
exploit20 said:
Hello everyone,
I am trying to fix my IMEI on SGS3 but without success. I cannot select RMNET+DM+MODEM in hidden menu (*#7284#). On UART there is only (MODEM, PDA) and USB (MODEM, PDA).
I've even tried SGS3-Exploiter-GeeK.exe but when I select this mode nothing happend, it just goes back to MTB+ADB.
TNX
Click to expand...
Click to collapse
Are you using International or US Galaxy S3 ?
Methods using Diag mode and software like SGS3-Exploiter-GeeK or QPST (Qualcomm Product Support Tools) are made to work ONLY with the United States variant of Galaxy S3 (based on Qualcomm SoC).
Now, I don't know software to fix International SGS3 without EFS folder backup (Sorry :crying: ) when nv_data.bin and .nv_data.bak are broken.
lelinuxien52 said:
Are you using International or US Galaxy S3 ?
Methods using Diag mode and software like SGS3-Exploiter-GeeK or QPST (Qualcomm Product Support Tools) are made to work ONLY with the United States variant of Galaxy S3 (based on Qualcomm SoC).
Now, I don't know software to fix International SGS3 without EFS folder backup (Sorry :crying: ) when nv_data.bin and .nv_data.bak are broken.
Click to expand...
Click to collapse
I had this problem on my S£ (international) a while back. It happened after flashing cm10, I had a generic IMEI code. I f'd around with it a bit using root explorer and the EFS folder and the .bak files but this did not work.
I tried ktools etc. nothing seemed to work..
oddly enough, i got it back by flashing back to the stock ics rom via Odin, since then my IMEI has been fine after flashing JB roms.
worth a try!
@lozfromcorby : I just saying they have not software to do that now on I9300. But I'm agree with you ! Sometimes, we can recover wrong IMEI when flahsing stock ROM.
Yep it's international ((
Ok I will try to flash stock rom again :/ I will post result here....
TNX
lelinuxien52 said:
Are you using International or US Galaxy S3 ?
Methods using Diag mode and software like SGS3-Exploiter-GeeK or QPST (Qualcomm Product Support Tools) are made to work ONLY with the United States variant of Galaxy S3 (based on Qualcomm SoC).
Now, I don't know software to fix International SGS3 without EFS folder backup (Sorry :crying: ) when nv_data.bin and .nv_data.bak are broken.
Click to expand...
Click to collapse
IMEI is still corrupted after going back to stock ROM
I've tried with my friend Z3X box to repair IMEI but without success ...
exploit20 said:
IMEI is still corrupted after going back to stock ROM
I've tried with my friend Z3X box to repair IMEI but without success ...
Click to expand...
Click to collapse
Why do you care anyway when your device is working? You corrupted it so deal with it.
Sent from my GT-I9300 using xda app-developers app
exploit20 said:
IMEI is still corrupted after going back to stock ROM
I've tried with my friend Z3X box to repair IMEI but without success ...
Click to expand...
Click to collapse
I have seen that the Z3X box can fix all Samsung Galaxy devices excepted SGS3 !
I think you need send your phone to repair center.
But before, you can try this :
Save remaining files contain on your EFS folder. For that, use EFS Tool Pro for example :
http://forum.xda-developers.com/showthread.php?t=1308546
Try this tutorial (with a full official stock firmware/kernel | Flash it with ODIN before trying repair) :
http://forum.xda-developers.com/showthread.php?t=1264021
Caution : DO IT ON YOUR OWN RISK.
If it doesn't work, you must :
- reset binary counter (with Chainfire tool : Triangleaway)
- perform total wipe data / wipe cache (from recovery mode)
- flash the latest stock firmware corresponding to your region
- verify the phone status : must be "Normal" and not "Modify".
Device is working... but no network thats why ((
Jack Barrett said:
Why do you care anyway when your device is working? You corrupted it so deal with it.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thank you, it seems thats the only thing I can do right now :/
lelinuxien52 said:
I have seen that the Z3X box can fix all Samsung Galaxy devices excepted SGS3 !
I think you need send your phone to repair center.
But before, you can try this :
Save remaining files contain on your EFS folder. For that, use EFS Tool Pro for example :
http://forum.xda-developers.com/showthread.php?t=1308546
Try this tutorial (with a full official stock firmware/kernel | Flash it with ODIN before trying repair) :
http://forum.xda-developers.com/showthread.php?t=1264021
Caution : DO IT ON YOUR OWN RISK.
If it doesn't work, you must :
- reset binary counter (with Chainfire tool : Triangleaway)
- perform total wipe data / wipe cache (from recovery mode)
- flash the latest stock firmware corresponding to your region
- verify the phone status : must be "Normal" and not "Modify".
Click to expand...
Click to collapse
I had the same problem tried different ways but no luck so I have sent off to Samsung been 2 weeks now, luckily for me a service centre isn't that far from me so I didn't have to pay postage
Sent from my HTC Desire S using xda premium
I might be able to help you. Pm me your efs backup + partition backup made with efs pro. If the information is still present I should be able to recover it.
@can't see who in tapatalk
Could you tell me which ics stock room version helped you recovering your imei?
Sent from my GT-I9300 using xda app-developers app
I have a temporary solution for you. if you still have the backup of the the EFS folder in your internal or external sd card than follow the following steps,
1. copy ALL the files from the EFS BACKUP FOLDER.
2. go to the root of your your phone with root explorer of ES file explorer and find the folder EFS. it should be with all the system folders like acct, config,data,dev,efs,etc so on and on.
3. now paste all the copied files in to EFS folder. tap on REPLACE THE FILES if ASKED...
4. close the app. and go to the home screen and wait for few seconds.
if your simcard have pin than it will ask the pin after few seconds and if it doesnt have any pin than it will just get the network.
good things is you have your IMEI number restored and can use the phone like regularly. NO PROBLEMS AT ALL. WITH NETWORK.
bad thing is NEVER LET YOUR PHONE SWITCH OFF. If it will switch off than you will have to follow all the steps again... annoying but works... let me know the progress buddy... best of luck...
Your other option is to to flash the stock rom but not let it finish. You will get a loop screen. Then just send it off for repair saying it doesn't turn on.. It will be diagnosed as a broken bootloader and fixed and the imei number will be back to the original. This happened with my old s1
Sent from my GT-I9300 using Tapatalk 2
No, I don't have a backup of the EFS folder I will try to send EFS folder to Spocky12 and hope that he can recover information...
Chaitanyapatel8880 said:
I have a temporary solution for you. if you still have the backup of the the EFS folder in your internal or external sd card than follow the following steps,
1. copy ALL the files from the EFS BACKUP FOLDER.
2. go to the root of your your phone with root explorer of ES file explorer and find the folder EFS. it should be with all the system folders like acct, config,data,dev,efs,etc so on and on.
3. now paste all the copied files in to EFS folder. tap on REPLACE THE FILES if ASKED...
4. close the app. and go to the home screen and wait for few seconds.
if your simcard have pin than it will ask the pin after few seconds and if it doesnt have any pin than it will just get the network.
good things is you have your IMEI number restored and can use the phone like regularly. NO PROBLEMS AT ALL. WITH NETWORK.
bad thing is NEVER LET YOUR PHONE SWITCH OFF. If it will switch off than you will have to follow all the steps again... annoying but works... let me know the progress buddy... best of luck...
Click to expand...
Click to collapse
Sorry buddy... I hope you will recover it...
exactly the reason i stopped messing around with my s3 :| i had screwed up my s2 like this and all the efs backups were corrupt too -_- hope you get your s3 fixed man.
Disclaimer: I'm not responsible if your phone wants to die with this :angel:
Do this at you own risk !!!!!
If this help see how !!!
I only put everything together IF ANYTHING THANKS HIM.....
Original thread
HTML:
http://forum.xda-developers.com/showthread.php?t=2432476
RETURN TO STOCK AT&T & Sprint Version ONLY!
Download
1. LGFlashTools
HTML:
https://docs.google.com/file/d/0B_nizg6yUZ0NYjVBQmlLYkpkZ2c/edit
2. Drivers google it.
Att only for Spring download the zip from the below.
3. Download Both Stock AT&T Image File and DLL (Both Files)
HTML:
http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2FAT%26T%2F
Megalock DLL
HTML:
https://docs.google.com/file/d/0B_nizg6yUZ0NZVJmOUcybUpCRlE/edit
Credit to @madmack for making most of this Guide for the G Pro Which also works on our G2
3.1 - FOR SPRINT FIRMWARE " BOTH FILES ARE IN THERE"
HTML:
http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2FSprint+LS980%2F
Install
1. Install the LG drivers
2. Install LGFlashTools
3. Extract the TOT\ DLL file from the ZIP and the Megalock DLL and add it to your LGFlashTools folder.
Which is located at the root of the computer.
4. Run the lg tool
5. hit manual and add you files where they belong
6. hit the yellow arrow and all Done !!!
Drivers initialization
1. Put the phone into download mode. (Turn off device PRESS VOL UP while plugging in the micro usb cable. If this doesn't work, try holding both volume keys instead)
2. Let the phone initialize and install the drivers. Once done, in Device manager, you should see the LG phone listed under COM ports (something along these lines).
3. Find that LG entry in Device Manager, click on Properties, Advanced and then change the COM port to COM41 and close/save.
4. Unplug your phone! Important step.
LGFlashTools
Note: you need Megalock DLL file to open LGFlashTools
Flashing
5. There is a yellow arrow on the top left. Click on it to initialize the process. It will reboot and that's it .
6. Put the phone in download mode again, and plug it into the USB port. LG FLash Tools should start flashing it automatically. When it's done, it'll automatically reboot into your stock AT&T rom and all of your data and internal sdcard files are gone.
HELP!
i tried all of this everything is where it should be but it keeps saying download failed device model is different! check phone or DLL! 00000000 i have sprint g2 ls980 its been bricked for a few days now please help.
rhkidaon420 said:
i tried all of this everything is where it should be but it keeps saying download failed device model is different! check phone or DLL! 00000000 i have sprint g2 ls980 its been bricked for a few days now please help.
Click to expand...
Click to collapse
You need the spring download... It should work but you need to set you com to 41... you might have downloaded the att version. It should say lg_ls980 dll and lg ls 980 tot to work
Nicamarcel1 said:
You need the spring download... It should work but you need to set you com to 41... you might have downloaded the att version. It should say lg_ls980 dll and lg ls 980 tot to work
Click to expand...
Click to collapse
nope downloaded the sprint file and the .dll im on com 41 i need to find a way to change my device model name its just G2 when this program is looking for the device to be named lg-ls980.i went to sprint today and tryed to trade it in for a new one or have them fix it he seen that i have twrp on there and said nope cant do anything so if all else fails ill just drop it in water and get it repaired or pay 150 and say its lost or stolen that way i can keep it and have 2
rhkidaon420 said:
nope downloaded the sprint file and the .dll im on com 41 i need to find a way to change my device model name its just G2 when this program is looking for the device to be named lg-ls980.i went to sprint today and tryed to trade it in for a new one or have them fix it he seen that i have twrp on there and said nope cant do anything so if all else fails ill just drop it in water and get it repaired or pay 150 and say its lost or stolen that way i can keep it and have 2
Click to expand...
Click to collapse
There could be many reasons why it didn't work. Just have to be patient and see if you had missed any steps. Have you tried using a different computer? You have the right drivers installed for your carrier? Got into Download Mode with no problems? You have the stock rom and the correct dll files? Seems like you know what you're doing so I suggest try it on a different computer and remember to reboot your system after making any changes/installations of programs or drivers.
I was in a similar situation and panicked and did rush through some steps which luckily I calmed down long enough to realize my mistakes and got a successful flash. Good luck on getting your phone running stock again or able to exchange for a new one.
In the spring.zip file there is the dll file and the tot file make sure you put both file and not use the att dll file. If you got the right one there is others thread that shows how to vome out of boot loop with out having to go back.
Sent from my LG-LS980 using xda premium
rhkidaon420 said:
i tried all of this everything is where it should be but it keeps saying download failed device model is different! check phone or DLL! 00000000 i have sprint g2 ls980 its been bricked for a few days now please help.
Click to expand...
Click to collapse
Has anyone found a solution to this error? I have this problem on my At&T LGD800 as well. Would have thought there'd be a way to force it to install and ignore errors.
http://forum.xda-developers.com/showthread.php?t=2451696
If you are not brick just boot loop just this might help http://forum.xda-developers.com/showthread.php?t=2451696
Sent from my LG-LS980 using xda app-developers app
help
how do i get the sprint tot...dll files out of the download
kozmikkick said:
Has anyone found a solution to this error? I have this problem on my At&T LGD800 as well. Would have thought there'd be a way to force it to install and ignore errors.
Click to expand...
Click to collapse
it was the dll just make sure you have the ls980 which its the one that tells the computer what phone its working on.
Greetings, So far I dug as far as I could in google. But still no luck. My 4.3 update on the GS4 gut buggy, So I thought I'd install back to 4.2.2 firmware using odin. Normally it succeeded. But when I inserted my Sim card, I couldn't make phone calls. Says not registered on Network. And my IMEI stated 0004...something. To save time I didn't thought of downloading the original firmware. So, I thought I could benefit from my mother's GS4 and use it's firmware unaware of the dangers. So I backed up system files from my mother's GS4 and restored it on my phone using TWRP. It booted and everything except there's completely no signal. Baseband is now UNKOWN and the IMEI is Null. I downloaded the stock firmware according to my mom's Baseband, but still no luck. I really need help. I'm beginning to lose faith in my phone and I'm afraid I'm gonna pay 40$ to fix it. I know nothing is impossible with you guys, so you are my last hope. PEACE!
You SHOULD NOT have downgraded your baseband like that, and when you did, and the trouble started, you should have searched first for solutions before trying to restore it from another device!
Anyway, now, you should flash the latest 4.3 modem or the 4.3 modem you had before, preferably flash the whole 4.3 rom again, the exact same version you had before, or the latest one, and your phone should live again properly!
jake_halawi said:
Greetings, So far I dug as far as I could in google. But still no luck. My 4.3 update on the GS4 gut buggy, So I thought I'd install back to 4.2.2 firmware using odin. Normally it succeeded. But when I inserted my Sim card, I couldn't make phone calls. Says not registered on Network. And my IMEI stated 0004...something. To save time I didn't thought of downloading the original firmware. So, I thought I could benefit from my mother's GS4 and use it's firmware unaware of the dangers. So I backed up system files from my mother's GS4 and restored it on my phone using TWRP. It booted and everything except there's completely no signal. Baseband is now UNKOWN and the IMEI is Null. I really need help. I'm beginning to lose faith in my phone and I'm afraid I'm gonna pay 40$ to fix it. I know nothing is impossible with you guys, so you are my last hope. PEACE!
Click to expand...
Click to collapse
You cannot downgrade it to 4.2.2, you must solve your issue over 4.3. Download your 4.3 rom o a newer rom from sammobile and flash it using odin 3.09 if you have i9505, or 3.07 of you have i9500.
Enviado desde mi GT-I9500 usando Tapatalk 2
jaswinky said:
You cannot downgrade it to 4.2.2, you must solve your issue over 4.3. Download your 4.3 rom o a newer rom from sammobile and flash it using odin 3.09 if you have i9505, or 3.07 of you have i9500.
Enviado desde mi GT-I9500 usando Tapatalk 2
Click to expand...
Click to collapse
I did Do That, still no luck. BTW I have the GT-I9500
Have similar issue
jake_halawi said:
I did Do That, still no luck. BTW I have the GT-I9500
Click to expand...
Click to collapse
I have a similar issue, it started when I put my S4 in flight mode, then when the plane landed I turn it off and since then I have no signal, IMEI NULL and when dialing *#1234# no CP information, only AP and CSC.
I have been digging and rooted the phone and tried with Galaxsim but nothing, then the IMEI null fix but nothing (once I applied this one the cell phone stuck in SAMSUNG icon at boot processs).
So I installed again stock firmware and it's back to the original status, no signal, no IMEI, etc... worrking only with wifi.
Please give me a hand on this. I also have GT-I9500
do you have a EFS copy? if u got a copy try restoring and then flash the latest modem, the 4.2 and 4.3 efs structure is diferent, i work phone repair area and the simlocks are diferent for me, if u can't do that, then go to a repair shop...
carlosm15 said:
do you have a EFS copy? if u got a copy try restoring and then flash the latest modem, the 4.2 and 4.3 efs structure is diferent, i work phone repair area and the simlocks are diferent for me, if u can't do that, then go to a repair shop...
Click to expand...
Click to collapse
I don't have efs Backup. And I'm trying to evade going to a repair shop because I'm sure there is a solution we just need to dig more. And thanks all for your suggestions. Helpful ^^
carlosm15 said:
do you have a EFS copy? if u got a copy try restoring and then flash the latest modem, the 4.2 and 4.3 efs structure is diferent, i work phone repair area and the simlocks are diferent for me, if u can't do that, then go to a repair shop...
Click to expand...
Click to collapse
I don't have efs backup, don't know how to do that. The thing is that I have sent to repair but they didn't solve the issue.
well try flashing a 4.3 modem only, when you try to downgrade you get imei 0047, then you flash the latest modem o 4.3 modem and everything its ok...
try with MG9 or MK1 modem...
Same thing happened to me 2 days before. I was using it on Airplane mode for almost 12 days and suddenly when I switched it to network it does not detect sim card. Later i found IMEI is null, Baseband unknown and serial number is messed up. I never rooted my phone. I tried to flash stock firmware 4.3 with odin still no luck.
Might go to repair shop..Just how my efs folder is damaged or anything else screwed up my imei and baseband..
Modders your help is appreciated..
carlosm15 said:
well try flashing a 4.3 modem only, when you try to downgrade you get imei 0047, then you flash the latest modem o 4.3 modem and everything its ok...
try with MG9 or MK1 modem...
Click to expand...
Click to collapse
I installed the latest modem of 4.3, Still no luck. I think this thing can't be fixed. I'm afraid I'm gonna pay 40$.
Guys who are having this problem try this:
What is needed
-A computer with ADB
-USB Cord for phone
-Your phone (of course lol)
What to do to possibly fix issue.
1. Make sure your phone's debugging is activated.
-If not go to Settings -> Developer Options -> Click "USB debugging"
2. Plug phone into computer (Make sure drivers are installed for adb to connect to your phone)
3. Open command promt and go to where adb is located
-(use "cd" (without quotations) to change directories i.e "cd c:\adb\" will take you to the directory needed)
4. Once you're in the same directory as the adb.exe file is type this
- adb reboot nvrestore
This will reboot your phone and you should see a quick flash on the screen stating in the top left in blue about restoring the nv
Kewl's suggestion. Link :http://teamuscellular.com/Forum/topic/2592-last-attempt-to-fix-stuck-in-roaming-mode-for-the-sgs3/
I didn't try it. I'll install ADB then test it. I bet your connection is faster than mine, so try it first and get back to this post if it worked.
jake_halawi said:
Guys who are having this problem try this:
What is needed
-A computer with ADB
-USB Cord for phone
-Your phone (of course lol)
What to do to possibly fix issue.
1. Make sure your phone's debugging is activated.
-If not go to Settings -> Developer Options -> Click "USB debugging"
2. Plug phone into computer (Make sure drivers are installed for adb to connect to your phone)
3. Open command promt and go to where adb is located
-(use "cd" (without quotations) to change directories i.e "cd c:\adb\" will take you to the directory needed)
4. Once you're in the same directory as the adb.exe file is type this
- adb reboot nvrestore
This will reboot your phone and you should see a quick flash on the screen stating in the top left in blue about restoring the nv
Kewl's suggestion.
I didn't try it. I'll install ADB then test it. I bet your connection is faster than mine, so try it first and get back to this post if it worked.
Click to expand...
Click to collapse
Sorry for the ignorance, what does ADB means?
santidavila said:
Sorry for the ignorance, what does ADB means?
Click to expand...
Click to collapse
usually this
I think I'm getting to the surface, I just need to know how to retrieve your original IMEI since your original efs is deleted. If you guys please help me and when everything is successful, I'll make a step by step guide on what I did.
My worst nightmare came true, I sent my S4 to Samsung, the price got high as 200$. I asked the reason why, they said that the EFS file is the most sensitive file in the phone, it what makes it a phone anyways. They also said that they will hook it on a box or something like that that costs about 7000$. That's a shocker. If you ask me what I'm going to do with my S4, I'll have to pay the price, and sell it for 400$ Until the s5 is announced, I'll close the price gap. Sorry for the bad news :/
My phone IMEI is correct i am only having the network not registered error can this command solve my device issue.
jake_halawi said:
Guys who are having this problem try this:
What is needed
-A computer with ADB
-USB Cord for phone
-Your phone (of course lol)
What to do to possibly fix issue.
1. Make sure your phone's debugging is activated.
-If not go to Settings -> Developer Options -> Click "USB debugging"
2. Plug phone into computer (Make sure drivers are installed for adb to connect to your phone)
3. Open command promt and go to where adb is located
-(use "cd" (without quotations) to change directories i.e "cd c:\adb\" will take you to the directory needed)
4. Once you're in the same directory as the adb.exe file is type this
- adb reboot nvrestore
This will reboot your phone and you should see a quick flash on the screen stating in the top left in blue about restoring the nv
Kewl's suggestion. Link :http://teamuscellular.com/Forum/topic/2592-last-attempt-to-fix-stuck-in-roaming-mode-for-the-sgs3/
I didn't try it. I'll install ADB then test it. I bet your connection is faster than mine, so try it first and get back to this post if it worked.
Click to expand...
Click to collapse
terminator1983 said:
My phone IMEI is correct i am only having the network not registered error can this command solve my device issue.
Click to expand...
Click to collapse
NO Don't try this. Go to settings > More > Mobile Networks > Network operators > wait for it to search and select your carrier.
jake_halawi said:
NO Don't try this. Go to settings > More > Mobile Networks > Network operators > wait for it to search and select your carrier.
Click to expand...
Click to collapse
No i have done that and even flashed stock firmwares and modem but still i am having this problem. I got this problem of weak signals and not registered to network after turning the airplane mode in airplane like stated by someone else in the above posts.
terminator1983 said:
No i have done that and even flashed stock firmwares and modem but still i am having this problem. I got this problem of weak signals and not registered to network after turning the airplane mode in airplane like stated by someone else in the above posts.
Click to expand...
Click to collapse
Then, problem is hardware not software.
I am not a dev or expert,I am just a regular guy who is suffering after buying franken D802.while trying to fix it,I have read a lot and saw that 70% users can't get there phone back.And TOT hex editing seems pretty hard to me as I could never pass previousload error.
So lets start from the beginning. I bought a D802,then I tried upgrading it by D802 kdz.now the phone has
1.No IMEI
2.bad touchscreen.
3.internal storage or MTP isn't shown on PC.
4.etc.
Now let's start.
1.open up the phone,see what's written in the motherboard.most of the time it's D800.
2.then get an OTG mouse and try to root it via apps like kingroot ,stumproot etc.because PC rooting method with IOroot doesn't work most of the time.
And don't worry if it shows error,keep trying.
Important:
*it's not possible sometimes to download apps via WiFi.I don't know why.if that happens,try installing them from a pendrive connecting via OTG HUB.
*If apps never gets installed,disable Verify Apps from settings>security
3.after rooting,change the model number and all D802 to your model(D800 in my case) via editing build.prop with any apps like es file explorer or build prop editor.
4.reboot device and see if software version,and model number changed.
5.flash D800 or your TOT or KDZ without any editing,from download mood.if your download mood shows secure boot error,use SRK tools to fix it,and SELECT D802,again SELECT D802 in SRK tools.
Because if you choose your model,like D800,your phone will go in fastboot mood.
Bingo!maybe your G2 is back! ✌?
Off topic:Took me 1.5 months to find a way to fix it! ?
I am stuck a fastboot mood after selecting D800 in SRK tools.
Fastboot devices aren't recognized and no QHSUSB_BULK .?
I am really afraid of tearing the phone up and shorten pins or something!
Jongla said:
I am stuck a fastboot mood after selecting D800 in SRK tools.
Fastboot devices aren't recognized and no QHSUSB_BULK .?
I am really afraid of tearing the phone up and shorten pins or something!
Click to expand...
Click to collapse
I don't think you have to shorten pins if you have fastboot!
What's your phone shown while connected to fastboot mood in PC?
Herny123 said:
I don't think you have to shorten pins if you have fastboot!
What's your phone shown while connected to fastboot mood in PC?
Click to expand...
Click to collapse
It's simply shown as "Android".
Jongla said:
It's simply shown as "Android".
Click to expand...
Click to collapse
Oh I had the exact same problem! ?
Uninstall all drivers,then installed updated LG drivers.and then install PDAnet.
Look at device manager.It should show your device as ADB interface or something and your phone should have a new line "fastboot processing commands"....
Herny123 said:
Oh I had the exact same problem! ?
Uninstall all drivers,then installed updated LG drivers.and then install PDAnet.
Look at device manager.It should show your device as ADB interface or something and your phone should have a new line "fastboot processing commands"....
Click to expand...
Click to collapse
Oh I don't know how to thank you!
Pdanet drivers did my work exactly as you say!! ?
Now what img should I flash?
D802 or D800?
Of course D802 as it thinks its a D802.
Then flash KDZ,then after booting up try doing as op..
Best of luck .. ?
You are a life saver!
Worked perfectly without any haste.
Thanks alot
Where do I will get D802 and D800 Rom kdz and what about flashing kernel
Where do I will get D802 and D800 Rom kdz and what about flashing kernel
go to'go back to stock' thread,you will find all kdz and tot.
And this kdz and tot includes kernels.
My phone model is D802 32GB - Flash KDZ Update to 5.0.2
Now
1.No IMEI
2.bad touchscreen.
3.no Signal
4.32GB Change to 10GB!
DownloadBoot ok - Read Storage in PC ok
What should I do? Please
KDZ & Tot D802 ( 4.2.2 (10f) - 4.4.2 (20d-20g) - 5.0.2 (30a) ) Tested!
I have flash ROM D800 totfile? Or No ?
if "Yes" : please link to my Download
I tried every way I got tired
avat2064 said:
My phone model is D802 32GB - Flash KDZ Update to 5.0.2
Now
1.No IMEI
2.bad touchscreen.
3.no Signal
4.32GB Change to 10GB!
DownloadBoot ok - Read Storage in PC ok
What should I do? Please
KDZ & Tot D802 ( 4.2.2 (10f) - 4.4.2 (20d-20g) - 5.0.2 (30a) ) Tested!
I have flash ROM D800 totfile? Or No ?
if "Yes" : please link to my Download
I tried every way I got tired
Click to expand...
Click to collapse
Open up the motherboard and see what's written there.
But most probably you have D800.
And if that is the model,here you go for the Tot.
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/AT&T/
I flashed 10o version with the method above.
Herny123 said:
I am not a dev or expert,I am just a regular guy who is suffering after buying franken D802.while trying to fix it,I have read a lot and saw that 70% users can't get there phone back.And TOT hex editing seems pretty hard to me as I could never pass previousload error.
So lets start from the beginning. I bought a D802,then I tried upgrading it by D802 kdz.now the phone has
1.No IMEI
2.bad touchscreen.
3.internal storage or MTP isn't shown on PC.
4.etc.
Now let's start.
1.open up the phone,see what's written in the motherboard.most of the time it's D800.
2.then get an OTG mouse and try to root it via apps like kingroot ,stumproot etc.because PC rooting method with IOroot doesn't work most of the time.
And don't worry if it shows error,keep trying.
Important:
*it's not possible sometimes to download apps via WiFi.I don't know why.if that happens,try installing them from a pendrive connecting via OTG HUB.
*If apps never gets installed,disable Verify Apps from settings>security
3.after rooting,change the model number and all D802 to your model(D800 in my case) via editing build.prop with any apps like es file explorer or build prop editor.
4.reboot device and see if software version,and model number changed.
5.flash D800 or your TOT or KDZ without any editing,from download mood.if your download mood shows secure boot error,use SRK tools to fix it,and SELECT D802,again SELECT D802 in SRK tools.
Because if you choose your model,like D800,your phone will go in fastboot mood.
Bingo!maybe your G2 is back!
Off topic:Took me 1.5 months to find a way to fix it!
Click to expand...
Click to collapse
my touch is not working properply. so, how can i change model number any other solution?
what laf, recovery,boot and aboot img
what type of laf.img, boot.img and recovery.img i use for my lg g2.
when i open it i saw d800 AT&T near processor over a sink of processor.
so what type of file i flash to my device to get correct download mode.
the problem which happen's to me is this.
my device was on KITKAT when i try to update my device to lollypop using lg support tool (auto update using lg support tool to latest android version) after that i got no imei, no baseband and bad touch screen than i flash kdz file but same happend no imei,no baseband and badtouch.than i try to flash using TOT method and i wipe out everything.so know i try pin's touching method on which i get qhsusb mode and i am able to flash different img files.but i don't know which version of files i use..do you know than please help me specify the correct version that i flash and get download , recovery all at the same time than i will flash 10d or 10o ROM using TOT method.
but first i need to fix download mode (i don't know which img files i use).
thank you.
Try laf.img,boot.img of D802 if you used D802 as the model to update to lolipop.this will fix download mode.
Umar_khan said:
my touch is not working properply. so, how can i change model number any other solution?
Click to expand...
Click to collapse
The other solution is you have to edit the hex of D800 TOT file,which I could never succeed at.
HELP ME!
I have Lg g2 D80220b Kitkat 4.4.2, LgMobile Support Tools > Upgrade to D80230a Lollipop 5.0.2
now this my phone Touchscreen random clicked, Help me ALL
This phone NEW Phone
/Sorry, My English Language is BAD/
Hello,
My phone is a D800 in inside but i bought it as a D802 and after software update all those creepy things happened.... can you please briefly what i need to do to get it back?
Thanks
Zoheb
lg g2 brick issue
zakir_zoheb said:
Hello,
My phone is a D800 in inside but i bought it as a D802 and after software update all those creepy things happened.... can you please briefly what i need to do to get it back?
Thanks
Zoheb
Click to expand...
Click to collapse
have u solve ur issue bro.
kalpesh patil said:
have u solve ur issue bro.
Click to expand...
Click to collapse
No kalpesh.. i couldn't... looking forward for your help.