IMEI deleted after burn EFS through Odin - Galaxy S I9000 General

I tried everything to cause the device to be successful choose network .. unable to select network
I saw someone wrote that EFS can burn through ODIN has done this and I deleted the IMEI
It should be noted that at first I did back up through NITRALITY and I'm now doing RESTORE through NITRALITY.. not helpful
I also made a backup of titanium and I have all the backup on the computer just have not the foggiest how to recover the IMEI if he backed it at all
Help anyone?

ShiloBeidany said:
I tried everything to cause the device to be successful choose network .. unable to select network
I saw someone wrote that EFS can burn through ODIN has done this and I deleted the IMEI
It should be noted that at first I did back up through NITRALITY and I'm now doing RESTORE through NITRALITY.. not helpful
I also made a backup of titanium and I have all the backup on the computer just have not the foggiest how to recover the IMEI if he backed it at all
Help anyone?
Click to expand...
Click to collapse
Try downgrade to oldest Froyo or eclair ROM with bootloader
use ODIN
Select PIT (usually 512)
Select BOOTLOADER (BOOT)
Select PDA (CODE)
Select PHONE (MODEM)
Select CSC (CSC)
If "Re-Partition" is not checked under "Option", check it.
Fire it up, after that IF NO IMEI, you can just restore with Nitrility

xsenman said:
Try downgrade to oldest Froyo or eclair ROM with bootloader
use ODIN
Select PIT (usually 512)
Select BOOTLOADER (BOOT)
Select PDA (CODE)
Select PHONE (MODEM)
Select CSC (CSC)
If "Re-Partition" is not checked under "Option", check it.
Fire it up, after that IF NO IMEI, you can just restore with Nitrility
Click to expand...
Click to collapse
Thanks , I don't know how to downgrade to froyo or eclair .. i found this guide : http://forum.xda-developers.com/showthread.php?t=734871
but all the links are dead . i'll be glad to some help

ShiloBeidany said:
Thanks , I don't know how to downgrade to froyo or eclair .. i found this guide : http://forum.xda-developers.com/showthread.php?t=734871
but all the links are dead . i'll be glad to some help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1102881, select according to your location , you can also try http://www.samfirmware.com/

Thanks man , when i worked like the guide say with the one click odin i stucked with boot screen of at&t and i can't get even download mode.. i lost , what can i do >

ShiloBeidany said:
Thanks man , when i worked like the guide say with the one click odin i stucked with boot screen of at&t and i can't get even download mode.. i lost , what can i do >
Click to expand...
Click to collapse
First that guide is meant for captivate, its another version of Galaxy S, all you needed to do was flash using Odin3...thats why I showed you where to get firmware it had complete instructions for flashing
OK, First pull out the battery from your phone , remove, EXT SD card as well as Sim Card and try to get into download mode,

Sorry I was just so tired I did not read right..
Even after I did everything this device is still stuck in at&t bootscreen..
thanks!

Related

Unknown Baseband

just need a little help. im trying to flash the official bell jk4 with odin, and it works, but there is no baseband = no phone.... is there anything i need to do in odin to fix this?
Which mounts did you load through Odin? Might be an incompatibility issues..
M3tic said:
Which mounts did you load through Odin? Might be an incompatibility issues..
Click to expand...
Click to collapse
im sorry, im not quite sure what you mean. im kind of a noob with odin.
Incorrect mounts or efs folder gone either of them. I hope you backed up the efs folder before hand....
pramathesh said:
Incorrect mounts or efs folder gone either of them. I hope you backed up the efs folder before hand....
Click to expand...
Click to collapse
hmm no i didnt back anything up like that. i have the bell jh2 firmware, and if i flash it back to that one, the baseband works. it just doesnt on jk4....
could you gimmie a quick step by step?
coconutboy84 said:
hmm no i didnt back anything up like that. i have the bell jh2 firmware, and if i flash it back to that one, the baseband works. it just doesnt on jk4....
could you gimmie a quick step by step?
Click to expand...
Click to collapse
well if the efs folder's gone you can't do anything about it....lets hope for now that it's the incorrect mounts that got you here. Tell us what exactly did you do on odin before you hit the flash button.
pramathesh said:
well if the efs folder's gone you can't do anything about it....lets hope for now that it's the incorrect mounts that got you here. Tell us what exactly did you do on odin before you hit the flash button.
Click to expand...
Click to collapse
all i did was add the tar file to the "pda" spot, nothing else was selected other than auto reboot. everything flashes fine. if i do this same method with jh2, everything works great, just not with jk4... doesnt make sense to me.
would you not need to flash all files to update correct (PDA,Modem + CSC)
i tried that and it just crashed.
what crashed? ODIN or the handset? are you using a PIT file also? and all lagfixes disabled prior to flashing?
Hey I Have the same problem now. Did you solve yours? If so can you please tell me how did you do it?
help
I had this Problem when unlocking a Galaxy S.
All i did was take the sim card out reflash then put simcard back in it didnt show restarted phone with simcard in and it worked.

[Q] Someone please help!!!

ok i recently got a european open to all networks samsung galaxy tab,
now i decided to install a custom rom last night with horrible results, my phone is now stuck on the samsung boot screen and will not load properly,
here are the steps i took that ended me up in this mess,
i installed rom manager from android market,
then installed clockwork mod from inside rom manager, following the exact steps i was given but heres where i think i went wrong,
at some point it asked u back up everything onto an sd card, now i thought i had an sd inside it already but i didnt and thats what i think caused all the trouble,
i backed up all my files anyway onto the internal memory b4 goin into recovery mode, after completely wiping the phone as it saids u shud do, i then proceeded to load the modaco rom that i had installed into the "download" section of my memory and thats where it said the exact following words....
Checking /system...
E: failed to mount /system (invalid argument)
/system may be rfs. checking...
checking /date...
checking /database...
checking /cache...
filesystems need to be converted to ext4.
a backup and restore will now take place.
if anything goes wrong, your backup will be named before-ext4-convert-1297008631. try restoring it incase of error.
E:failed to mount /sdcrard (no such file or directory)
now i've tried restoring it and backing it up but all it repeats is the same thing, i know i messed up but now all i want to know is how can i fix it?
please any help would be much appreciated.
KingofXings said:
ok i recently got a european open to all networks samsung galaxy tab,
now i decided to install a custom rom last night with horrible results, my phone is now stuck on the samsung boot screen and will not load properly,
[..]
now i've tried restoring it and backing it up but all it repeats is the same thing, i know i messed up but now all i want to know is how can i fix it?
please any help would be much appreciated.
Click to expand...
Click to collapse
A brandnew start from scratch with Odin and repartioning with the rom from Rotohammer JMIv1.0 or v2.0 wouldt be my advice. You need the pit-file as well. Can be found on his server.
Heppieboeddah said:
A brandnew start from scratch with Odin and repartioning with the rom from Rotohammer JMIv1.0 or v2.0 wouldt be my advice. You need the pit-file as well. Can be found on his server.
Click to expand...
Click to collapse
ok ive downloaded odin v4.03, downloaded the original samsung firmware version P1000XWJJ3.rar from this website and downloaded the european P1_EUR.pit file also but i'll be honest i'm very new to the android world and dont have a clue what to do from here, how do i repartion the rotohammer rom?
i know i'm gonna sound stupid but if u could please explain it step by step i would be very grateful, thank you
Read the following thread that explains how to flash Rotohammer JMI ROM
http://forum.xda-developers.com/showthread.php?t=939360
Give it a good read and then ask if you have any questions before you start the process again.
KingofXings said:
ok ive downloaded odin v4.03, downloaded the original samsung firmware version P1000XWJJ3.rar from this website and downloaded the european P1_EUR.pit file also but i'll be honest i'm very new to the android world and dont have a clue what to do from here, how do i repartion the rotohammer rom?
i know i'm gonna sound stupid but if u could please explain it step by step i would be very grateful, thank you
Click to expand...
Click to collapse
First extract the P1000XWJJ3.rar. You shouldt be left with a single tar-file?! If so
Well if you have the right files. Start Odin. On the left you see the option 'repartion', tick that box. On the left you see pit. Tick that box and load the pit-file. Tick the box PDA and load the tar.file you extracted.
Start the tablet in download modus and attach it to youre pc. You shouldt see on top left a yellow box. Then just press start in Odin
beware that all on yore tablet will be deleted.
here is a very good guide with pictures.
http://leemn.wordpress.com/2011/01/25/galaxy-tab-flashing-a-new-rom-rotohammer-jme/
Heppieboeddah said:
First extract the P1000XWJJ3.rar. You shouldt be left with a single tar-file?! If so
Well if you have the right files. Start Odin. On the left you see the option 'repartion', tick that box. On the left you see pit. Tick that box and load the pit-file. Tick the box PDA and load the tar.file you extracted.
Start the tablet in download modus and attach it to youre pc. You shouldt see on top left a yellow box. Then just press start in Odin
beware that all on yore tablet will be deleted.
here is a very good guide with pictures.
......ok i followed the steps from above which was to install the Roto JMI Pre-Rooted Firmware v2 it got me pass the boot screen and everything on the tab works except it wont let me make phone calls, everything else works but it picks up no network and when i enter into settings it wont even let me access it?? almost like this is a wifi only rom ive installed??
what do i do from here to get it back to a phone?
Click to expand...
Click to collapse
KingofXings; said:
......ok i followed the steps from above which was to install the Roto JMI Pre-Rooted Firmware v2 it got me pass the boot screen and everything on the tab works except it wont let me make phone calls, everything else works but it picks up no network and when i enter into settings it wont even let me access it?? almost like this is a wifi only rom ive installed??
what do i do from here to get it back to a phone?
Click to expand...
Click to collapse
Ok great. at least you got it working again....
Now you need to flash the baseband-modem that you can find in the download link below. Flash it in Odin. Uncheck repartion. Check 'phone' and load the modemfile you downloaded. Its a tar.file. Leave it as it is. Then press start and the baseband will be installed.
Then you have to set-up the APN from youre telecom-provider and you will be up and running.....
http://forum.xda-developers.com/showpost.php?p=11148313&postcount=129
Heppieboeddah said:
Ok great. at least you got it working again....
Now you need to flash the baseband-modem that you can find in the download link below. Flash it in Odin. Uncheck repartion. Check 'phone' and load the modemfile you downloaded. Its a tar.file. Leave it as it is. Then press start and the baseband will be installed.
Then you have to set-up the APN from youre telecom-provider and you will be up and running.....
ok i downloaded the p100-radio-xxjmf.tar file and followed the instructions u gave but it failed and said this message...
<ID:0/004> set up connection.
<ID:0/004> cant open the serial (COM) port.
OSM All threads completed ( succeeded 0/ failed 1)
i dont understand why it would say that, could it be cos the .tar is xxjmf and the Rom by roto uses jmi? u think u could help? thanks again honestly, you've been a life saver.
Click to expand...
Click to collapse
Ok i just changed the usb ports and it works perfectly, the phone is back online and i didnt even have to fiddle with the apn settings, 3G just works fine,
thank you so much for ur help, i couldnt of done any of this without u, if ur ever around in north west london, u got a drink on me lol
KingofXings said:
Ok i just changed the usb ports and it works perfectly, the phone is back online and i didnt even have to fiddle with the apn settings, 3G just works fine,
thank you so much for ur help, i couldnt of done any of this without u, if ur ever around in north west london, u got a drink on me lol
Click to expand...
Click to collapse
Good to read youre up and running again...
Cheers....
Heppieboeddah said:
Good to read youre up and running again...
Cheers....
Click to expand...
Click to collapse
Hey mate, seems I am in a similar predicament here. Just 2 days back I flashed my Tab to Roto JMI v2 from a stock Asian firmware (DDJK3 I suppose) due to a bad Modaco flash that went really bad. Wiped off my data from god knows what areas. Now I am facing an issue that I am not able to understand or solve.
I was using Titanium Backup to remove a system app without Chuck Norris mode, which meant I had to reboot device and it would delete it OS level and say reboot to system. But once I click on reboot system an Exclamation mark just comes across the screen and NOW I CAN'T BOOT INTO my system. neither to i see the options it was earlier showing me upon Pwer + Vol Key up. The only option left for me is to reflash it using Odin.
Any Ideas mate? Reflashing again and again is not the solution right?
Thanks & Cheers!
sahildeswal said:
Hey mate, seems I am in a similar predicament here. Just 2 days back I flashed my Tab to Roto JMI v2 from a stock Asian firmware (DDJK3 I suppose) due to a bad Modaco flash that went really bad. Wiped off my data from god knows what areas. Now I am facing an issue that I am not able to understand or solve.
I was using Titanium Backup to remove a system app without Chuck Norris mode, which meant I had to reboot device and it would delete it OS level and say reboot to system. But once I click on reboot system an Exclamation mark just comes across the screen and NOW I CAN'T BOOT INTO my system. neither to i see the options it was earlier showing me upon Pwer + Vol Key up. The only option left for me is to reflash it using Odin.
Any Ideas mate? Reflashing again and again is not the solution right?
Thanks & Cheers!
Click to expand...
Click to collapse
Well, first of all. Removing system app ad hoc is not really clever to do. But you cant get into the recovery so you are able to clear cache and do a factory-reset? Volume-up+Power on and holding the volume-upbutton untill you get into the recovery?
If not you have to reflash from scratch with Odin. Use the pit/file and check repartion.

Need help to fix imei issue

In the beginning, i can use my note 3 n9005 SFR as usual. But once i tried flashing rom, it showed as error (fail) because I chose BL instead of AP. And i tried to fix it by follow the instructions as Mr. Firasusman suggest me as said in the this link http://forum.xda-developers.com/showthread.php?t=2614787. It solved the problem my phone can now get into the normal screen but i found a new problem. I put in sim card but there is no network signal and I also lost imei when i checked in phone status. What should I do to fix this problem? Anyone, please help me. Thanks a lot.
IMEI = Unknown
S/N change
Baseband ok
wittaya73 said:
In the beginning, i can use my note 3 n9005 as usual. But once i tried flashing rom, it showed as error (fail) because I chose BL instead of AP. And i tried to fix it by follow the instructions as Mr. Firasusman suggest me. My phone can now get into the normal screen but i found a problem. I put in sim card but there is no network signal and I also lost imei when i checked in phone status. What should I do to fix this problem? Anyone, please help me. Thanks a lot.
Click to expand...
Click to collapse
Check whether EFS folder is backed up by flashed rom in sdcard. If your lucky you can use backup file to get imei number back. Few posts also suggest that flashing back stock rom also get back imei. I am not sure of it. Better back up efs to your pc.
wittaya73 said:
In the beginning, i can use my note 3 n9005 SFR as usual. But once i tried flashing rom, it showed as error (fail) because I chose BL instead of AP. And i tried to fix it by follow the instructions as Mr. Firasusman suggest me as said in the this link http://forum.xda-developers.com/showthread.php?t=2614787. It solved the problem my phone can now get into the normal screen but i found a new problem. I put in sim card but there is no network signal and I also lost imei when i checked in phone status. What should I do to fix this problem? Anyone, please help me. Thanks a lot.
Click to expand...
Click to collapse
Are you in 4.3 or 4.4.2?
Sent from my SM-N9005 using Tapatalk
imapk said:
Check whether EFS folder is backed up by flashed rom in sdcard. If your lucky you can use backup file to get imei number back. Few posts also suggest that flashing back stock rom also get back imei. I am not sure of it. Better back up efs to your pc.
Click to expand...
Click to collapse
What is EFS? After My first flashed firmware, I couldn't get into the normal screen. I even tried to flash back with stock rom via odin, but failed everytimes. I've tried to get back stock rom by using kies, but no luck; and stuck in Odin mode when I turn on my phone.
Then I found this link http://forum.xda-developers.com/showthread.php?t=2614787 which help me able to turn on my phone to normal. But new issue come.
No network connection, and IMEI unknow.
Please suggest.
wittaya73 said:
What is EFS? After My first flashed firmware, I couldn't get into the normal screen. I even tried to flash back with stock rom via odin, but failed everytimes. I've tried to get back stock rom by using kies, but no luck; and stuck in Odin mode when I turn on my phone.
Then I found this link http://forum.xda-developers.com/showthread.php?t=2614787 which help me able to turn on my phone to normal. But new issue come.
No network connection, and IMEI unknow.
Please suggest.
Click to expand...
Click to collapse
Flash THIS And don't mess with your phone any more.
radicalisto said:
Flash THIS And don't mess with your phone any more.
Click to expand...
Click to collapse
Thanks for your reply.
Already did, but nothing change; imei still unknown.
wittaya73 said:
What is EFS? After My first flashed firmware, I couldn't get into the normal screen. I even tried to flash back with stock rom via odin, but failed everytimes. I've tried to get back stock rom by using kies, but no luck; and stuck in Odin mode when I turn on my phone.
Then I found this link http://forum.xda-developers.com/showthread.php?t=2614787 which help me able to turn on my phone to normal. But new issue come.
No network connection, and IMEI unknow.
Please suggest.
Click to expand...
Click to collapse
EFS is a folder in phone's file system which saves your phone model, IMEI number and lot more details, Important folder. Flashing ROM the efs folder got corrupted causing the loss of imei number. Try "radicalisto" reply and update the issue.
wittaya73 said:
Thanks for your reply.
Already did, but nothing change; imei still unknown.
Click to expand...
Click to collapse
Flash Stock ROM via ODIN then apply the fix.zip
radicalisto said:
Flash Stock ROM via ODIN then apply the fix.zip
Click to expand...
Click to collapse
I did what you told above, but nothing change. IMEI still unknow. I also noticed that S/N has been changed too.
Please advise.
Still need help, please.
radicalisto said:
Flash THIS And don't mess with your phone any more.
Click to expand...
Click to collapse
This fix never worked? - hmm,you have lost your EFS/IMEI somehow then. Does *#06# bring up an IMEI? - if not you'll have to search around for how to fix your IMEI (It can be done)
still need help here.

[Q] Galaxy Young Startup with Red screen of death

Hi, i would like to find a way to fix a red screen problem.
A year ago i had a black screen and fixed it, used that solution for the red one but doesn't work.
Click to expand...
Click to collapse
When i start my galaxy young after the Galaxy Young GT-S5360 splash it turns into a red screen then shuts down.
Click to expand...
Click to collapse
I originally used Qualcomm NV Tools to read the SPC Code,
then i went into ADB shell & did su + setprop ril.MSL 123456, it worked fine, and the phone started good, but still no MSL / SPC Code, also used MSL Reader but didn't work. Also it didn't ask for root permissions.
Click to expand...
Click to collapse
Then here problems come. A red screen of death appears.
I tried using my USB Jig (even if download mode works without) to put the phone in download mode,
it worked, then connected to the computer using its original USB cable, before using Odin.
I though there could be a difference between "Factory" and "Odin" mode.
Used Odin version is 3.07 : The one that comes with "T Flash, Flash Lock, Nand Erase All".
Click to expand...
Click to collapse
I thought it was an efs problem. But how could i flash efs if totoro.pit comes with an EFS partition that doesn't have an img file? (the --11 Entry EFS without Image flash name).
I used PIT Magic (part of EFS Pro) to insert "efs.rfs" in Flash Name + FOTA, saved the file.
Click to expand...
Click to collapse
I checked re-partition and selected the totoro.pit file, i also've written "PhoneEnable=1" in Odin3.ini to use Phone Bootloader Update feature.
I inserted the Bootloader, PDA, Modem, & CSC Files. I checked Phone Bootloader Update.
The flash was fine, & efs.rfs (my most recent EFS backup image) flashed correctly into phone's.
Click to expand...
Click to collapse
But the phone still shows the red screen. I think the red screen is caused by "setprop ril.MSL 123456",
as i used qualcomm NV Tools many times and phone always worked fine.
Click to expand...
Click to collapse
The efs partition is usually not mountable in a galaxy y
Remove the sd card from your phone
Go into download mode
Flash the firmware from my firmware thread (links in my signature)
Never flash a pit file or bootloader - if you choose the wrong one you will brick your phone as you have discovered
If you can't successfully boot the phone after that you will have to flash the correct bootloader via a jtag - if you don't have one goto a repair shop as they cost about £200 UK pounds
If after that it still doesn't work might have to replace motherboard but you might as well put the money towards a new phone
Hi marcussmith2626,
I flashed Bootloader in the s5360 ODD package and used totoro.pit file
marcussmith2626 said:
If after that it still doesn't work might have to replace motherboard but you might as well put the money towards a new phone
Click to expand...
Click to collapse
Then i think it will be cheaper to buy a fresh new phone
Thank for your help anyway :good:
I fixed the problem 1 week after your reply, i could post solution if someone needs.
Killnolife said:
I fixed the problem 1 week after your reply, i could post solution if someone needs.
Click to expand...
Click to collapse
How you fix ?? i need so much !!! Please Help me ...
thiefxhunter said:
How you fix ?? i need so much !!! Please Help me ...
Click to expand...
Click to collapse
I took an hex editor and started the phone in download mode,
i took totoro.pit and added cal.bin under 'cal' partition name, and flashed custom pit.
(restarted and made a custom odin package with this cal.bin).
then i sent my latest cal backup (call this EFS Backup) and sent to device my cal.bin inside TAR file.
Then the phone restarted without problems.
Do you have an EFS (in fact cal) backup of your phone?
It's the bml15 block of your device. :good:
Killnolife said:
I took an hex editor and started the phone in download mode,
i took totoro.pit and added cal.bin under 'cal' partition name, and flashed custom pit.
(restarted and made a custom odin package with this cal.bin).
then i sent my latest cal backup (call this EFS Backup) and sent to device my cal.bin inside TAR file.
Then the phone restarted without problems.
Do you have an EFS (in fact cal) backup of your phone?
It's the bml15 block of your device. :good:
Click to expand...
Click to collapse
Can you upload the file?, this red screen of death is a common issue in the samsung galaxy young. thanks

(Problem) SW REV. CHECK FAIL. DEVICE: 2. Binary: 1.

Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my english is too bad, but I tried, I know that someone else have the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!
Flash latest stock with csc, but skip bl section
amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!
Try clean formatting
Arachnorbit said:
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!
Click to expand...
Click to collapse
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)
invinsible_asp said:
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)
Click to expand...
Click to collapse
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.
Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
Arachnorbit said:
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.
Click to expand...
Click to collapse
Download the latest firmware from https://updato.com (it's fast and reliable) then start in download mode, run odin with administrative privileges, select BL AP Modem and CSC (dont use home since we wish to clean fornat), and in odin uncheck auto reboot option, after the ODIN shows 'pass', disconnect the cord from pc, now you have to be very quick here since our battery is not removable, in order to shut down s7 edge from odin mode, all you have to do is press, volume down, volume up, home and power and as soon as it goes off connect the cord, the battery will show up and now it will be in charging state, after that disconnect the cord, (the phone is now clean fornatted and in off stage) and now boot into recovery to wipe data and cache using default recovery, then reboot phone and then log into your existing google account.
I know its tricky and maybe there's an ez way around it but this worked for me so I'm sharing
SOLUTION, thank you all for your answers!
AndyBury said:
Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I tried it at first instance but I could not because my Bootloader was updated to the "U2" version, what I did after that was search the Combination file updated to the U2 bootloader, after a long search I found it.
In resume, The solution is what the OP of that thread says but if you have the same problem like me with the Updated bootloader you need this file instead of the files that are shown there:
https://androidfilehost.com/?fid=890129502657582963
Thank you all! I hope this can help y'all that has this problem! :fingers-crossed:
i am same problem ,how to fix it?
help me
jed0123 said:
help meView attachment 4491615
Click to expand...
Click to collapse
You already fixed the problem I guess, you only need to flash the same firmware that your phone had before flashing the Combination file.
can not
Help
How to know what was my old firmware version? when I try to flash i get SW REV. CHECK FAIL. DEVICE: 2. Binary: 1
And I can't start phone because I'm getting FRP lock. Please help me?
Edit: I downloaded latest firmware and flashed it.
Same problem with s8+
amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
I have the same problem with my S8+ SM-G955F
I flashed the latest firmware without BL....now my phone is working fine...but I dont have SIGNAL.. any help will be appreciated..
Moved
Thread moved to Questions and Answers.
hello.
im having the exactly same issue....
Im from Brazil, i was trying to install the stock rom then ill upgrade to android 8.0....(my android does not update becouse it from VIVO PROVIDER, my english sucks...hope you understand)
i open odin, select all files, of a stock rom ZTO G935F, then it just give me this error...
how can i fix it? i just want to install android 8.0 nougat =(
thx alot for trying help me!!!
i fixed my phone by skipping the booloader section...
you're a life saver brother...
Thank you
Regards
Arachnorbit said:
Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my English is too bad, but I tried, I know that someone else has the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!
Click to expand...
Click to collapse
try custom ROMs and I'm sure they have update bootloader and modem use that and its work in my phone
jed0123 said:
can notView attachment 4491806
Click to expand...
Click to collapse
Hello, how did you solve it?
Help I keep getting SW REV. CHECK FAIL. DEVICE:3. BINARY:2 when trying to downgrade BL CP for G935W8

Categories

Resources