Related
If I am on AT&T with MDL can I upgrade to 4.3 without going to MF3?
dtronx said:
If I am on AT&T with MDL can I upgrade to 4.3 without going to MF3?
Click to expand...
Click to collapse
No.
However, I suggest you just install one of the 4.3 ROMS (there is at least one available already) from the development section instead of taking the full update so you can still use a custom recovery and LOKI'd ROMs..
scott14719 said:
No.
However, I suggest you just install one of the 4.3 ROMS (there is at least one available already) from the development section instead of taking the full update so you can still use a custom recovery and LOKI'd ROMs..
Click to expand...
Click to collapse
Thanks will do that
I would check out ShoStock-i MF3 or Venoms or Ax's International Roms. At all cost keep your MDL Bootloaders and have access to custom recoveries and flash WHATEVER you want. Safestrap is nice IF your stuck on MF3 but it has its limitations on what you can flash with it. Plus I am sure once the official tar drops for the ATT MJ9 firmware you will see some Roms based on ATTs stock firmwares and STILL have the ability to go back to other older firmwares if you want. With SafeStrap you are limited to 4.2.2 Roms at this time
Sent From My ATT S3 i747 Dark Blue BadAss Theme
Hi all,
My Google-fu is failing me and I'm not certain of the best route to take a Galaxy S4 SGH-I337 AT&T 4.2.2 MF3 (Rooted with Motochopper) up to the new AT&T 4.3 firmware.
Can anyone point me in the direction of a guide for doing this? Everything I'm reading seems like I'll have to sacrifice my root, flash to stock with Odin, and then wait for AT&T to re-release the OTA update to 4.3. Am I off base?
Motochopper cannot root MF3. We're you able to hold root when you upgraded and are hoping to keep root again?
At the moment yes you will have to sacrifice root. I did. Root keeper does not support android 4.3 and keeping with SuperSU does not work either.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
CAG-man said:
Motochopper cannot root MF3. We're you able to hold root when you upgraded and are hoping to keep root again?
At the moment yes you will have to sacrifice root. I did. Root keeper does not support android 4.3 and keeping with SuperSU does not work either.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
I'm just gonna wait until a stock 4.3 rom comes out that supports safestrap so I can keep root
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
mrpeters said:
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
Click to expand...
Click to collapse
Since you are rooted with a custom recovery you CAN flash 4.3 now without losing root. Just use ShoStock-i MJ9 4.3http://forum.xda-developers.com/showthread.php?t=2468860
Or VisionX MJ9 4.3 http://forum.xda-developers.com/showthread.php?t=2391142
Or Deadly Venom MJ9 4.3 http://forum.xda-developers.com/showthread.php?t=2503692
and POSSIBLY a couple other 4.3 Touchwiz firmwares that are found in the Android Development Section
These are all from he International MJ9 firmwares but to me are better than the ATT firmwares for 4.3. The ATT 4.3 removed the Data Toggle completely from the pulldown menu and now you have to go into settings each time to turn it on or off. Plus other changes that are solely LACKING compared to the international firmwares. I have tried two of the above and they are both great and the third from what I have read works great as well. They are all great devs. Try them out and I suggest using the Jeboo 3.0 kernel for best results.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I concur with RockRatt. Shostock-I is smooth. It is bundled with jeboos 3.0 kernel. Love it. Biased, though. I've been using Sho's roms since my/his s2 days..
Sent from my TARDIS
If "mrpeters" is MF3 he can't and shouldn't try flashing a 4.3 rom cause our MF3 Safestrap don't support it at the moment.
Sent from my ATT S4 MF3 using Tapatalk
mrpeters said:
Hi all,
My Google-fu is failing me and I'm not certain of the best route to take a Galaxy S4 SGH-I337 AT&T 4.2.2 MF3 (Rooted with Motochopper) up to the new AT&T 4.3 firmware.
Can anyone point me in the direction of a guide for doing this? Everything I'm reading seems like I'll have to sacrifice my root, flash to stock with Odin, and then wait for AT&T to re-release the OTA update to 4.3. Am I off base?
Click to expand...
Click to collapse
mrpeters said:
My phone is still rooted at this moment, though I'm on 4.2.2. I haven't upgraded anything yet. I was hoping there was a custom rom or something I could flash to get to 4.3 and retain root.
Click to expand...
Click to collapse
jball said:
If "mrpeters" is MF3 he can't and shouldn't try flashing a 4.3 rom cause our MF3 Safestrap don't support it at the moment.
Sent from my ATT S4 MF3 using Tapatalk
Click to expand...
Click to collapse
I only gave the advice above because he said he is ROOTED WITH MOTOCHOPPER ON MF3. As we know MF3 cannot be rooted with motochopper. So I was guessing that he rooted while on MDL or MDB with motochopper and used a ROM to upgrade to MF3.
So unless he is/was mistaken with those comments and he meant to say rooted on MF3 with safestrap then I would of told him to look at the safestrap threads.
Hopefully he clears things up with that as I WON'T want to give him Bad Advice.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
I didn't quote anybody for a reason.just stating facts based on my reading the OP post.its all good
Sent from my ATT S4 MF3 using Tapatalk
Yea there's a difference between having a phone shipped with MF3 and having upgraded to MF3
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
My phone stock was MDL and I took the OTA to MF3.
MF3 is MF3
Every time I read a thread anyone starts I also read the profiles of all the people in the threads posted.no clear mention of his base in his profile
Sent from my ATT S4 MF3 using Tapatalk
My phone was not MF3 stock. It got upgraded sometime after I rooted. To be completely honest, I'm not sure how. Kies maybe?
All I know is I still have root If I have to wait where I'm at, no big deal!
mrpeters said:
My phone was not MF3 stock. It got upgraded sometime after I rooted. To be completely honest, I'm not sure how. Kies maybe?
All I know is I still have root If I have to wait where I'm at, no big deal!
Click to expand...
Click to collapse
well my touch screen has stopped working, so now this phone gets to go back to AT&T for repairs.
whats the best way to remove root and factory default it?
sorry to bump an old thread, but I wanted to see if anything had changed so I could upgrade from my rooted 4.2.2 I337UCUAMF3 to one of the newer OS versions that are out. This phone was a warranty replacement, but I had no trouble rooting it with Motochopper when I got it so I don't think it came stock with MF3, but its been 6 months so I can't say for certain.
mrpeters said:
sorry to bump an old thread, but I wanted to see if anything had changed so I could upgrade from my rooted 4.2.2 I337UCUAMF3 to one of the newer OS versions that are out. This phone was a warranty replacement, but I had no trouble rooting it with Motochopper when I got it so I don't think it came stock with MF3, but its been 6 months so I can't say for certain.
Click to expand...
Click to collapse
You could flash the md3 tar and return it to stock. Then let out update itself. You'll lose root and you'll want to read some of the threads on the general section dealing with mk2 and nb1 before you do so so you know what you're getting in to
Sent from my SAMSUNG-SGH-I727
jd1639 said:
You could flash the md3 tar and return it to stock. Then let out update itself. You'll lose root and you'll want to read some of the threads on the general section dealing with mk2 and nb1 before you do so so you know what you're getting in to
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
10-4. I don't want to lose root, so that's key. I should have clarified that. I use too many apps (LightFlow, NoBloat, Titanium, etc.) that I wouldn't want to give up.
mrpeters said:
10-4. I don't want to lose root, so that's key. I should have clarified that. I use too many apps (LightFlow, NoBloat, Titanium, etc.) that I wouldn't want to give up.
Click to expand...
Click to collapse
You could flash 4.3 MK2 with odin then root with saferoot.
The 4.3 tar can be found here http://d-h.st/wH3 The pit here http://d-h.st/5gz
Saferoot can be found here http://forum.xda-developers.com/showthread.php?t=2565758
jball said:
My phone stock was MDL and I took the OTA to MF3.
MF3 is MF3
Every time I read a thread anyone starts I also read the profiles of all the people in the threads posted.no clear mention of his base in his profile
My MDL updated itself when I went back to stock and forgot to disable OTA. Now that I'm locked into TW, is there a reason NOT to update to MK2? I know that it will install KNOX but with saferoot and safestrap, I'll have the same functionality of my rooted MF3?
Click to expand...
Click to collapse
I am at the same place in my phone. Were you ever able to update to 4.3 I need to do the same to have access to certain options and apps
Currently have a AT&T S4 rooted with MDL firmware. I have flashed other 4.3 loki roms without any problems (using Goldeneye 20 now). From the reading that I have done on the forums, it is my understanding that certain roms require a newer firmware version, for example, Hyperdrive. Is that a correct statement? If so, will that continue to be the trend with later releases? Can anyone provide any additional information to help me understand this better? Thanks in advance!
beefwilliams said:
Currently have a AT&T S4 rooted with MDL firmware. I have flashed other 4.3 loki roms without any problems (using Goldeneye 20 now). From the reading that I have done on the forums, it is my understanding that certain roms require a newer firmware version, for example, Hyperdrive. Is that a correct statement? If so, will that continue to be the trend with later releases? Can anyone provide any additional information to help me understand this better? Thanks in advance!
Click to expand...
Click to collapse
For MDL, that does not apply. Basically people with MF3+ phones need to upgrade to 4.3 to have 4.3 ROMs. All you need to do is continue to use loki and never upgrade your bootloaders.
DeadlySin9 said:
For MDL, that does not apply. Basically people with MF3+ phones need to upgrade to 4.3 to have 4.3 ROMs. All you need to do is continue to use loki and never upgrade your bootloaders.
Click to expand...
Click to collapse
Unless he wants a 4.4.2 rom then he needs the new bootloader....which is locked! so stay away of 4.4.2 for now
Flashing roms (unless stated by OP) will not update your bootloader correct? Since I am one of the lucky ones to have the MDL, I don't want to jeopardize it.
daraj said:
Unless he wants a 4.4.2 rom then he needs the new bootloader....which is locked! so stay away of 4.4.2 for now
Click to expand...
Click to collapse
Not true, he can flash a 4.4.2 ROM with the MDL bootloader as long as he gets a loki 4.4.2 kernel. Otherwise the 4.4.2 Google Edition thread wouldn't get much attention
beefwilliams said:
Flashing roms (unless stated by OP) will not update your bootloader correct? Since I am one of the lucky ones to have the MDL, I don't want to jeopardize it.
Click to expand...
Click to collapse
Flashing ROMs will not touch your bootloaders. Just never take any OTA updates to the stock ROM, and never ODIN any firmware except MDL. OTA updates on custom ROMs will only work in some cases (GE doesn't because they're ported from a different model, Hyperdrive will because it has a specialized system).
I'm MDL on 4.2.2, how did you upgrade to 4.3 but keep your MDL?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Wittyusernametaken said:
I'm MDL on 4.2.2, how did you upgrade to 4.3 but keep your MDL?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
You can use the StockUp ROM, it's just MK2 with bloat removed and you can even flash the bloat back on if you want.
DeadlySin9 said:
You can use the StockUp ROM, it's just MK2 with bloat removed and you can even flash the bloat back on if you want.
Click to expand...
Click to collapse
Interesting yeah, no bloat love here, I've got a metric ton of it frozen with Titanium. I was thinking that the only thing I could try was http://forum.xda-developers.com/showthread.php?t=2356276 . I haven't actually flashed any roms yet, only rooted and have twrp. Thank you for the info
I'm on MDL firmware (AT&T) running Hyperdrive RSL13 with KTs kernel. I've had 4.2.2 and 4.4.2 roms on this phone. You can bounce around with no problem. My recovery auto lokis...using shabby penguins recovery.
Hello XDA-
I have an i337 Galaxy S4 with MK2 firmware. I got Safestrap 3.71 for recovery bypassing and I have a really strange issue. It seems no ROMs that I flash a successful. Ever. I've tried AOSP ROMs, Cyanogen, etc. When I just tried installing Cyanogen I went to ROM slot 1, wiped it of everything except the external SD card, went to install, selected the .zip for MY device off of the external SD, flashed it, and when I reboot I get a teal screen with pulsing pink/brown lines on it. The same applies when I do any other ROM, except sometimes I just get a black screen that endlessly loop reboots.
Any ideas?
Thanks.
You can't flash aosp or cm roms in safe strap. They have to be touch wiz based.
jd1639 said:
You can't flash aosp or cm roms in safe strap. They have to be touch wiz based.
Click to expand...
Click to collapse
Ahh, are you serious? Safestrap is the only working recovery bypass on my MK2 firmware, ugh. Hopefully Samsung eventually unlocks the bootloader. Well, I'm off to looking for a TouchWiz based ROM then.
Thanks!
nhannon9 said:
Ahh, are you serious? Safestrap is the only working recovery bypass on my MK2 firmware, ugh. Hopefully Samsung eventually unlocks the bootloader. Well, I'm off to looking for a TouchWiz based ROM then.
Thanks!
Click to expand...
Click to collapse
You can, however, install Google Edition ROMs, I believe. Search through the Safestrap thread to make sure, but that should allow you a relatively AOSP-like experience.
mattdm said:
You can, however, install Google Edition ROMs, I believe. Search through the Safestrap thread to make sure, but that should allow you a relatively AOSP-like experience.
Click to expand...
Click to collapse
That's all I wanted, a clean Google ROM. I can't find any that actually work though. :/
Let me know if you find any. Thanks.
nhannon9 said:
That's all I wanted, a clean Google ROM. I can't find any that actually work though. :/
Let me know if you find any. Thanks.
Click to expand...
Click to collapse
@nhannon9 Check this thread by @guut13 http://forum.xda-developers.com/showthread.php?t=2616221 and look for Blackbox v2.2.1 and pretty clean AOSP rom ...... Read that MK2 INDEX thread ..... anything u should know about MK2...... Goodluck. ....:thumbup:
EDIT : @mattdm I believed that we can't install any 4.3 GPE yet on MK2 + SSV3.71. The closest AOSP experience are Blackbox v2.2.1 from International S4 I9505 .....:thumbup::thumbup:
Swyped From MK2 Dark Venom SS Edition
nhannon9 said:
That's all I wanted, a clean Google ROM. I can't find any that actually work though. :/
Let me know if you find any. Thanks.
Click to expand...
Click to collapse
Have you tried this one? http://forum.xda-developers.com/showthread.php?p=47718525
It's not Kitkat, but it's still nice and clean.
Also, make sure you're using the correct version of Safestrap. One version 3.65 is for MF3 users, and version 3.71 is for MK2 users.
Sent from my SGH-I337 using XDA Premium 4 mobile app
mattdm said:
Have you tried this one? http://forum.xda-developers.com/showthread.php?p=47718525
It's not Kitkat, but it's still nice and clean.
Also, make sure you're using the correct version of Safestrap. One version 3.65 is for MF3 users, and version 3.71 is for MK2 users.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
As @ted77usa said, no GPE ROMs work. All he'll get from that is bootloops and disappointment.
DeadlySin9 said:
As @ted77usa said, no GPE ROMs work. All he'll get from that is bootloops and disappointment.
Click to expand...
Click to collapse
I've seen many people in the past months reporting that they're running GPE ROMs on Safestrap with no problems. Has something changed recently that I don't know about?
EDIT: Ah, I didn't see his edit up there. Sorry for giving false hope! I don't keep up with the Safestrap scene much since I have a Loki'd S4.
mattdm said:
I've seen many people in the past months reporting that they're running GPE ROMs on Safestrap with no problems. Has something changed recently that I don't know about?
EDIT: Ah, I didn't see his edit up there. Sorry for giving false hope! I don't keep up with the Safestrap scene much since I have a Loki'd S4.
Click to expand...
Click to collapse
Yeah. If you have an MF3 S4 then you can run a 4.2.2 GE ROM, but us on MK2 are out of luck for a full AOSP experience unless an exploit is implemented.
Can we get some links for 4.2.2 GE roms for mf3
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
gtrijoe said:
Can we get some links for 4.2.2 GE roms for mf3
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try Google 4.2.2 gpe rom i337 xda
gtrijoe said:
Can we get some links for 4.2.2 GE roms for mf3
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Or, you could go search for them? That's why there's a search function. It's not there for looks and it works. We don't need all these threads posting and asking for other members to look for something for you. It's not hard to find them.
Sent from my SGH-I337 using Tapatalk
Hello all,
I picked up a Galaxy S4 when ATnt discounted a "certified new" off contract device for $190 a few weeks back.
I upgraded it from my nexus 4 and well.. I just prefer the look of stock android, however the better screen, battery life and LTE are great reasons to upgrade.
I was wondering if there was a 4.4.2 KitKat rom for this device ( SGH-i337 ) that will resemble the look and feel of my Nexus4.
My device has the latest bootloader so the LOKI method will not work
Thanks for the input.
EDIT: my device is rooted with safestrap installed on the latest OTA
koszor said:
Hello all,
I picked up a Galaxy S4 when ATnt discounted a "certified new" off contract device for $190 a few weeks back.
I upgraded it from my nexus 4 and well.. I just prefer the look of stock android, however the better screen, battery life and LTE are great reasons to upgrade.
I was wondering if there was a 4.4.2 KitKat rom for this device ( SGH-i337 ) that will resemble the look and feel of my Nexus4.
My device has the latest bootloader so the LOKI method will not work
Thanks for the input.
EDIT: my device is rooted with safestrap installed on the latest OTA
Click to expand...
Click to collapse
Blackbox 3.0 or Purified/Goldeneye with Domination theme are the closest you can get to AOSP.
Thr33-F0ur said:
Blackbox 3.0 or Purified/Goldeneye with Domination theme are the closest you can get to AOSP.
Click to expand...
Click to collapse
Awesome! I appreciate the fast response I'm going to try them tonight
http://forum.xda-developers.com/showthread.php?t=2429072
will this one work for the i337?
koszor said:
Awesome! I appreciate the fast response I'm going to try them tonight
http://forum.xda-developers.com/showthread.php?t=2429072
will this one work for the i337?
Click to expand...
Click to collapse
Yes. You'll have to goto blackboxroms.com for the download.
koszor said:
Hello all,
I picked up a Galaxy S4 when ATnt discounted a "certified new" off contract device for $190 a few weeks back.
I upgraded it from my nexus 4 and well.. I just prefer the look of stock android, however the better screen, battery life and LTE are great reasons to upgrade.
I was wondering if there was a 4.4.2 KitKat rom for this device ( SGH-i337 ) that will resemble the look and feel of my Nexus4.
My device has the latest bootloader so the LOKI method will not work
Thanks for the input.
EDIT: my device is rooted with safestrap installed on the latest OTA
Click to expand...
Click to collapse
I would also keep an eye on Eclipse rom. It is the only Touchwiz/AOSP hybrid rom that actually has an authentic AOSP pull-down and notification. It also has a whole bunch of AOSP stuff. The kitkat version of the rom will be released soon I think.
4ndroid99 said:
I would also keep an eye on Eclipse rom. It is the only Touchwiz/AOSP hybrid rom that actually has an authentic AOSP pull-down and notification. It also has a whole bunch of AOSP stuff. The kitkat version of the rom will be released soon I think.
Click to expand...
Click to collapse
Every rom I've tried to install leaves me at a blank screen where I have to use Odin to bring my phone back, did I miss something?
koszor said:
Every rom I've tried to install leaves me at a blank screen where I have to use Odin to bring my phone back, did I miss something?
Click to expand...
Click to collapse
Make sure you follow the instructions from this thread.
Scroll down the the 4.4.2 rom section and there is a step by step how-to.
More importantly, make sure you're installing only Touchwiz-based roms, since you're bootloader locked and on safestrap.
4ndroid99 said:
Make sure you follow the instructions from this thread.
Scroll down the the 4.4.2 rom section and there is a step by step how-to.
More importantly, make sure you're installing only Touchwiz-based roms, since you're bootloader locked and on safestrap.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51067706
I followed that guide, two different Roms both would not boot, I can downgrade to mk2 and have nb1 baseband ...is that the firmware I need to be running to flash the ROM? Or can I be on nc1
koszor said:
http://forum.xda-developers.com/showthread.php?p=51067706
I followed that guide, two different Roms both would not boot, I can downgrade to mk2 and have nb1 baseband ...is that the firmware I need to be running to flash the ROM? Or can I be on nc1
Click to expand...
Click to collapse
What roms did you try?
4ndroid99 said:
What roms did you try?
Click to expand...
Click to collapse
Gravitron and GoldenEye both said safestrap compatible , gravitron booted to a black screen after the phone displays galaxy s4
GoldenEye let me go to safestrap but did not boot at all
koszor said:
Gravitron and GoldenEye both said safestrap compatible , gravitron booted to a black screen after the phone displays galaxy s4
GoldenEye let me go to safestrap but did not boot at all
Click to expand...
Click to collapse
Did you flash the nb1 kernel modules immediately after flashing the rom?
koszor said:
Gravitron and GoldenEye both said safestrap compatible , gravitron booted to a black screen after the phone displays galaxy s4
GoldenEye let me go to safestrap but did not boot at all
Click to expand...
Click to collapse
GoldenEye requires you to replace the updater script, did you do that?
Thr33-F0ur said:
Did you flash the nb1 kernel modules immediately after flashing the rom?
Click to expand...
Click to collapse
yes, and then i booted to odin mode to flash the 3 other files in the BL AP and CP slots
4ndroid99 said:
GoldenEye requires you to replace the updater script, did you do that?
Click to expand...
Click to collapse
im going to try this again, i missed that part
Moderator Edit: Thread about rom with specific features begets replies about roms that are great to try. The roms with the features iterated n the OP are the ones that you discover by looking, reading, comparing, and flashing. Thread closed.