If I am on AT&T with MDL can I upgrade to 4.3 without going to MF3?
dtronx said:
If I am on AT&T with MDL can I upgrade to 4.3 without going to MF3?
Click to expand...
Click to collapse
No.
However, I suggest you just install one of the 4.3 ROMS (there is at least one available already) from the development section instead of taking the full update so you can still use a custom recovery and LOKI'd ROMs..
scott14719 said:
No.
However, I suggest you just install one of the 4.3 ROMS (there is at least one available already) from the development section instead of taking the full update so you can still use a custom recovery and LOKI'd ROMs..
Click to expand...
Click to collapse
Thanks will do that
I would check out ShoStock-i MF3 or Venoms or Ax's International Roms. At all cost keep your MDL Bootloaders and have access to custom recoveries and flash WHATEVER you want. Safestrap is nice IF your stuck on MF3 but it has its limitations on what you can flash with it. Plus I am sure once the official tar drops for the ATT MJ9 firmware you will see some Roms based on ATTs stock firmwares and STILL have the ability to go back to other older firmwares if you want. With SafeStrap you are limited to 4.2.2 Roms at this time
Sent From My ATT S3 i747 Dark Blue BadAss Theme
Related
From what I have read on the forums MF3 has is suppose to patch loki and prevent custom recoveries from being installed on the phone. I am on MDL with a custom rom flashed on it and running on T-Mobile and was curious about the "benefits" if I were going to upgrade to MF3. The most interesting one to me is better cell signal... Would there be anyway to flash a hacked version of mf3 or some other baseband update? Or are the differences so minute that it doesnt really matter.
jmarsh24 said:
From what I have read on the forums MF3 has is suppose to patch loki and prevent custom recoveries from being installed on the phone. I am on MDL with a custom rom flashed on it and running on T-Mobile and was curious about the "benefits" if I were going to upgrade to MF3. The most interesting one to me is better cell signal... Would there be anyway to flash a hacked version of mf3 or some other baseband update? Or are the differences so minute that it doesnt really matter.
Click to expand...
Click to collapse
The OTA MF3 update includes a locked bootloader. This is what you don't want.
You could either flash an MF3 Rom (this won't include the locked bootloader) or just flash the MF3 modem if you want to see if it gives you a better signal.
Is there a way to do it to maintain the ability to flash asop roms?
rayburne said:
The OTA MF3 update includes a locked bootloader. This is what you don't want.
You could either flash an MF3 Rom (this won't include the locked bootloader) or just flash the MF3 modem if you want to see if it gives you a better signal.
Click to expand...
Click to collapse
jmarsh24 said:
Is there a way to do it to maintain the ability to flash asop roms?
Click to expand...
Click to collapse
Yes. As stated abive just flash a mf3 modem. You xan find the modem thread in the dev section. It wont change anything but your baseband so you can keep your aosp rom you have now.
If you do decide to flash a mf3 based rom you can always go back to aosp roms. Nothing will change for you as far as flashing any roms you want to. UNLESS you go back to stock and take the OTA MF3 software update. All the info you need can be found in the dev section for our device
Sent from My Spiderman/IronMan/Dark Blue/Red/Green/GreyedOut BadAss Themed I337
Luckily, if you go back to stock, you will not be able to get the OTA MF3 since you are on T-Mobile's network. Unless, you had the phone or anyone had the phone activated on AT&T's network at any time in the past.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Currently have a AT&T S4 rooted with MDL firmware. I have flashed other 4.3 loki roms without any problems (using Goldeneye 20 now). From the reading that I have done on the forums, it is my understanding that certain roms require a newer firmware version, for example, Hyperdrive. Is that a correct statement? If so, will that continue to be the trend with later releases? Can anyone provide any additional information to help me understand this better? Thanks in advance!
beefwilliams said:
Currently have a AT&T S4 rooted with MDL firmware. I have flashed other 4.3 loki roms without any problems (using Goldeneye 20 now). From the reading that I have done on the forums, it is my understanding that certain roms require a newer firmware version, for example, Hyperdrive. Is that a correct statement? If so, will that continue to be the trend with later releases? Can anyone provide any additional information to help me understand this better? Thanks in advance!
Click to expand...
Click to collapse
For MDL, that does not apply. Basically people with MF3+ phones need to upgrade to 4.3 to have 4.3 ROMs. All you need to do is continue to use loki and never upgrade your bootloaders.
DeadlySin9 said:
For MDL, that does not apply. Basically people with MF3+ phones need to upgrade to 4.3 to have 4.3 ROMs. All you need to do is continue to use loki and never upgrade your bootloaders.
Click to expand...
Click to collapse
Unless he wants a 4.4.2 rom then he needs the new bootloader....which is locked! so stay away of 4.4.2 for now
Flashing roms (unless stated by OP) will not update your bootloader correct? Since I am one of the lucky ones to have the MDL, I don't want to jeopardize it.
daraj said:
Unless he wants a 4.4.2 rom then he needs the new bootloader....which is locked! so stay away of 4.4.2 for now
Click to expand...
Click to collapse
Not true, he can flash a 4.4.2 ROM with the MDL bootloader as long as he gets a loki 4.4.2 kernel. Otherwise the 4.4.2 Google Edition thread wouldn't get much attention
beefwilliams said:
Flashing roms (unless stated by OP) will not update your bootloader correct? Since I am one of the lucky ones to have the MDL, I don't want to jeopardize it.
Click to expand...
Click to collapse
Flashing ROMs will not touch your bootloaders. Just never take any OTA updates to the stock ROM, and never ODIN any firmware except MDL. OTA updates on custom ROMs will only work in some cases (GE doesn't because they're ported from a different model, Hyperdrive will because it has a specialized system).
I'm MDL on 4.2.2, how did you upgrade to 4.3 but keep your MDL?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Wittyusernametaken said:
I'm MDL on 4.2.2, how did you upgrade to 4.3 but keep your MDL?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
You can use the StockUp ROM, it's just MK2 with bloat removed and you can even flash the bloat back on if you want.
DeadlySin9 said:
You can use the StockUp ROM, it's just MK2 with bloat removed and you can even flash the bloat back on if you want.
Click to expand...
Click to collapse
Interesting yeah, no bloat love here, I've got a metric ton of it frozen with Titanium. I was thinking that the only thing I could try was http://forum.xda-developers.com/showthread.php?t=2356276 . I haven't actually flashed any roms yet, only rooted and have twrp. Thank you for the info
I'm on MDL firmware (AT&T) running Hyperdrive RSL13 with KTs kernel. I've had 4.2.2 and 4.4.2 roms on this phone. You can bounce around with no problem. My recovery auto lokis...using shabby penguins recovery.
Im at stock att 4.3 JB firmware with MK2 bootloader.
I wish to use safestrap to install a rom (maybe GE rom or just normal TW rom)
if after I install the loki modules and my rom boots will I lose my Tmobile unlocked status since this is an att phone.
also, do I have to odin flash a modem.bin for new 4.4.2 android version or can i just simply install a 4.4.2 rom and be good with current radio or modem?
Since your are on MK2, no more Loki.
You won't lose unlock status.
Search for the all things at&t thread, it has lot of required info.
All you need for the ROM to work with T-Mobile would be the correct APN settings.
Sent from my GT-I9505G using Tapatalk
Im so confused because safestrap forum says i need to retain to a MK2 based rom but in the Goldeneye thread it says added support for safestrap
also safestrap telling me to flash mk2 modules zip after every installation do I actually need to do this? im assuming your saying mk2 doesn't need loki kernel flashed ..
Also am i restricted to only TW roms i have the US i337 att phone
Stoowyguy said:
Im so confused because safestrap forum says i need to retain to a MK2 based rom but in the Goldeneye thread it says added support for safestrap
also safestrap telling me to flash mk2 modules zip after every installation do I actually need to do this? im assuming your saying mk2 doesn't need loki kernel flashed ..
Also am i restricted to only TW roms i have the US i337 att phone
Click to expand...
Click to collapse
Let me clear some confusion of yours.
While on MK2, safestrap recovery can be used to flash 4.3 based ROMS.
We have Deadly Venom Kitakat tool that allows us to flash certain kitkat roms from the All Things ATT thread.
You will be able to flash the Golden Eye 33.3 safestrap edition. Follow the steps mentioned in the tool.
Hello,
What is the best way to get back to complete stock (including locked bootloader). I'm done with playing with custom ROMs (running CM11 right now). I want stock and guaranteed stability then nightmare dealing with nightlies etc.
artisticcheese said:
Hello,
What is the best way to get back to complete stock (including locked bootloader). I'm done with playing with custom ROMs (running CM11 right now). I want stock and guaranteed stability then nightmare dealing with nightlies etc.
Click to expand...
Click to collapse
I'm guessing you're on an I337 since you mentioned locked bootloader. If I were you I'd just flash a 4.4.2 stock ROM so that you can keep the possibility to use AOSP ROMs like the Google Edition ROMs and others. You can flash the ROM from HERE, use the version that doesn't say wBL at the end. Then just flash one of the 4.4.2 modems in RockRatt's I337 modem thread and it should work just fine. You could even reflash the MDL firmware before all of this to make it clean, or even just freeze the updater and stay on MDL.
If you really want to get rid of all possibility of running more than themed and modded TouchWiz ROMs, you can simply go to the General section, find the NB1 ODIN files, and flash them. If you want root after that, take the OTA to NC1 or sideload it and then use towelroot.
DeadlySin9 said:
I'm guessing you're on an I337 since you mentioned locked bootloader. If I were you I'd just flash a 4.4.2 stock ROM so that you can keep the possibility to use AOSP ROMs like the Google Edition ROMs and others. You can flash the ROM from HERE, use the version that doesn't say wBL at the end. Then just flash one of the 4.4.2 modems in RockRatt's I337 modem thread and it should work just fine. You could even reflash the MDL firmware before all of this to make it clean, or even just freeze the updater and stay on MDL.
If you really want to get rid of all possibility of running more than themed and modded TouchWiz ROMs, you can simply go to the General section, find the NB1 ODIN files, and flash them. If you want root after that, take the OTA to NC1 or sideload it and then use towelroot.
Click to expand...
Click to collapse
So if I flash one of NB1 ODIN files my phone will looks like something I get from ATT store if I walk in there today, right? That's what I want to achieve, completely something unadultered.
artisticcheese said:
So if I flash one of NB1 ODIN files my phone will looks like something I get from ATT store if I walk in there today, right? That's what I want to achieve, completely something unadultered.
Click to expand...
Click to collapse
Yes, it will be just like the others in every way, knox bootloader and settings and all, no custom flags or anything.
4.2.2 / MDL here. I'm rooted to freeze the metric ton of bloatware/greenify/xposed. Didn't get into ROMs because I'm afraid of bricking my only phone.
Been sidelined for several months with health issues, wondering if there's been any new stuff down the pipeline or if I should stay at 4.2.2/MDL? TIA.
Sliced bread has come out. Jk, given the time taken for someone to answer you, nothing new has come out that's earth shaking. Other than new firmware. If everything works for you it probably isn't worth upgrading.
You're on mdl which allows you to flash a number of different roms which you aren't taking advantage of. The latest firmware, nc1, is rootable with towel root. You can flash touch wiz based roms but that doesn't seem to be an interest to you So you might consider updating to nc1 if you want the latest firmware. But many people would like to be in your shoes with mdl firmware.
Sent from my Nexus 5 using XDA Free mobile app
If you have root and custom recovery (TWRP or CWM) and want to update to newer firmware I would suggest Sho-Stock-i V7.0 Then you w I uld have the newest firmware without having to use Safestrap and be limited to what you can do with your phone.
I would STAY AWAY from updating to the newest firmware (stock firmware) NC1 as right now you can do ANYTHING you want with your phone. That is why I suggested ShoStock to have the best of both worlds. Personally there is NOT MUCH different between your MDL 4.2.2 firmware and the newest 4.4.2 firmwares. Maybe a little smoother.
Sent From My ATT S3 i747 Dark Blue BadAss Theme
Would reception be better with 4.4.2? We recently took a road trip and on a very long stretch my hubby on 4.4.2 had coverage the whole time while I had 0 service for about 1/2 of the stretch. Other areas he was pulling data fine while my phone showed no service or a G and up and down arrows which was completely new to me. It's bizarre.
RockRatt said:
If you have root and custom recovery (TWRP or CWM) and want to update to newer firmware I would suggest Sho-Stock-i V7.0 Then you w I uld have the newest firmware without having to use Safestrap and be limited to what you can do with your phone.
I would STAY AWAY from updating to the newest firmware (stock firmware) NC1 as right now you can do ANYTHING you want with your phone. That is why I suggested ShoStock to have the best of both worlds. Personally there is NOT MUCH different between your MDL 4.2.2 firmware and the newest 4.4.2 firmwares. Maybe a little smoother.
Sent From My ATT S3 i747 Dark Blue BadAss Theme
Click to expand...
Click to collapse
I don't think I have recovery? I only remember rooting, no option for twrp or cwm. Am I hosed now?
Wittyusernametaken said:
I don't think I have recovery? I only remember rooting, no option for twrp or cwm. Am I hosed now?
Click to expand...
Click to collapse
If you are still in fact on MDL then you can get TWRP or CWM recovery and flash as I stated above. You can use ShoStock-i once you have a custom recovery. First VERIFY you have MDL bootloaders. Then if you do look into "Motochopper +Loki" which will give you the custom recovery. Then flash to ShoStock-i. Then you can flash any of the modems in my thread to find which works best for your phone in your area. Maybe see which "baseband" (baseband=Modem) your husbands phone has (if it is also a i337 S4).
Sent fron I337 Red BadAss Themed ShoStock 7.0
do you have a link for the Sho-Stock-i V7.0? I can't find it? Also would any version of CyanogenMod work? I can't find one that would work without me upgrading to 4.4 if my google searches are correct. Sorry for the delay in replying... health issues are a PITA.
Wittyusernametaken said:
do you have a link for the Sho-Stock-i V7.0? I can't find it? Also would any version of CyanogenMod work? I can't find one that would work without me upgrading to 4.4 if my google searches are correct. Sorry for the delay in replying... health issues are a PITA.
Click to expand...
Click to collapse
You do NOT need to update to run ShoStock. Just flash his newest in recovery (TWRP/ cwm/etc.) It will give you the newer firmware of 4.4.2 but NOT give you the 4.4.2 bootloader. So you can always flash back to your MDL stock firmware via odin. Like I said, the best of both worlds. Keeping the bypassed bootloader while running newer firmware. Just use ShoStock 8.1 (NOT THE SAFESTRAP VERSION)