I have I337 with MDL bootloader. Omega 19 (4.3), MK2 GSM modem and MDL LTE modem.
New Omega 20 based on leaked 4.4.2 come.
I read Omega 20 installation notes than it works only with new 4.4.2 bootloder.
Does this means that the only way to install 4.4.2 is wait i337 4.4.2 stock, flash it and use safe strap.
PS
Is LOKI kernel for 4.4.2 TW available?
Was kinda wondering this myself.
I'm on 4.4.2 GE ROM, I assume just flashing a 4.4 ROM updates your bootloader but strangely I don't see any 4.4 TW ROMs in our Dev section yet?
Was hoping somebody has flashed an Intl 4.4 ROM with loki-doki and all was good.
seanpr123 said:
Was kinda wondering this myself.
I'm on 4.4.2 GE ROM, I assume just flashing a 4.4 ROM updates your bootloader but strangely I don't see any 4.4 TW ROMs in our Dev section yet?
Was hoping somebody has flashed an Intl 4.4 ROM with loki-doki and all was good.
Click to expand...
Click to collapse
Flashing a rom only updates the system and kernel. The modem, bootloader, and recovery stay intact. Odin packages contain the bootloader and modem. These are all on separate partitions.
The 4.4.2 released was a i9505 rom and only for them. You can be on an older bootloader and flash newer android version roms but you can't do the opposite and say flash a 2.3 rom while you on a 4.0 rom.
Also most people don't want the permanence of being stuck on a leak release and not being able to go back.
hednik said:
Flashing a rom only updates the system and kernel. The modem, bootloader, and recovery stay intact. Odin packages contain the bootloader and modem. These are all on separate partitions.
The 4.4.2 released was a i9505 rom and only for them. You can be on an older bootloader and flash newer android version roms but you can't do the opposite and say flash a 2.3 rom while you on a 4.0 rom.
Also most people don't want the permanence of being stuck on a leak release and not being able to go back.
Click to expand...
Click to collapse
Ahh ok, so I really do still have an MDL bootloader huh (even though I've flashed different modems).
But I can switch from a 4.4 GE/CM ROM to any 4.3 or 4.2.2 if I choose, so what do you mean not being able to go back?
seanpr123 said:
Ahh ok, so I really do still have an MDL bootloader huh (even though I've flashed different modems).
But I can switch from a 4.4 GE/CM ROM to any 4.3 or 4.2.2 if I choose, so what do you mean not being able to go back?
Click to expand...
Click to collapse
MDL was the second update I believe (right after release) for 4.2.2 before the the lock. Once you update the bootloader on these lock bootloaders (even MDL is locked, just has a loki work around) you can't go back. The bootloaders are going to be locked and you wont be able to flash a Odin .tar and go back. You are on there. YOu can flash 4.4 roms on a 4.2.2 bootloader but not a 4.2 rom on a 4.4 bootloader.
Alrighty, so to answer OP's question.
You should be fine to flash new Omega with a wipe of Cache/Davlik/System/Data followed by loki-doki.
seanpr123 said:
Alrighty, so to answer OP's question.
You should be fine to flash new Omega with a wipe of Cache/Davlik/System/Data followed by loki-doki.
Click to expand...
Click to collapse
not unless he is okay being stuck with a he new bootloader knowing he cant go to another rom unless its a 4.4
Omega (and all custom ROMs) wouldn't include the bootloader as you mentioned in your first reply...
seanpr123 said:
Omega (and all custom ROMs) wouldn't include the bootloader as you mentioned in your first reply...
Click to expand...
Click to collapse
It's true.
I am confused by what I read in the installation Instructions for Omega v20:
Installation:
1. Backup your device (nadroid backup, titanium backup, efs backup ... etc) and save the backup to a safe place.
2. Flash the new bootloder and modems with odin -> I9505XXUFNA1_Bootloader_Modems.tar
Click to expand...
Click to collapse
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
You SOL buddy. Sell the phone and get something else. You will never be able to downgrade
MOTO X SLAPPED
djmisi99 said:
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
Click to expand...
Click to collapse
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
el o el
The s4 is nothing like previous samsung devices...at least on att, the bootloader is locked, safestrap is your only option.
Also keep in mind, att stated about a year ago they will no longer be supporting phones with unlocked bootloaders...so the problem you are experiencing now can be expected on every new att branded phone
Sent from my SAMSUNG-SGH-I337 using Tapatalk
djmisi99 said:
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
Click to expand...
Click to collapse
There is NO WAY back from mk2. You can flash custom roms ONLY with Safestrap. No CWM no TWRP. Read this guide, it has everything you need to know for the S4. There is nearly 30 custom roms tested & affirmed working. Good luck & happy reading.
http://forum.xda-developers.com/showthread.php?t=2616221
SGS4 AT&T i337 on Stock MK2...jeboo kernel/recovery needed to install SHOstock v3.0 ?
I am very familiar with custom roms and your kernels, from always using them on my SGS2 i777 (AT&T), but i just bought an SGS4 i337 AT&T, on MK2 baseband, and everybody suggested I should install the SHOstock v3.0 for the i337 (http://forum.xda-developers.com/show....php?t=2305752).
Problem is, I am sooooo confused now, because there is jeboo kernels: (Jeboo_Kernel_i337_v3_0a-i.zip, Jeboo_Kernel_i337_v3_0a.zip, Jeboo_Kernel_i337_v3_0.zip, Jeboo_Kernel_i337_v2_2.zip)
...than there's your RECOVERY: Jeboo_Recovery_v2_1.zip
so Im very confused now how I should go about installing our most awesome DEV shoman94's SHOstock v3.0) ROM...==> THAT I DUNNO WHAT SHOULD I DO ANYMORE.....
1. Because, on the thread there (http://forum.xda-developers.com/show....php?t=2305752), in POST#1 it says , in the Instructions, that :We must be running a custom recovery using Jeboo's Recovery from Post#4 which is your Jeboo_Recovery_v2_1.zip
2. But how should I run the Jeboo_Recovery_v2_1.zip RECOVERY, if Im on SafeStrap 3.71 (which is a recovery also)???
3. If i flash Jeboo_Recovery_v2_1.zip, wont that brick (or softbrick) the S4?
4. Or if I flash Jeboo_Recovery_v2_1.zip, will I end up having 2 recoveries? Or will I only end up with having only the Jeboo_Recovery_v2_1 ???
5. In POST#3, it says that:
IF YOUR PHONE HAS MF3/MK2 BOOTLOADERS, YOU MUST RUN THE MF3/MK2 STOCK KERNEL. DO NOT TRY INSTALLING ANYTHING BELOW UNLESS YOU HAVE MDB/MDL BOOTLOADERS THAT SUPPORT LOKI!!
So, should I NOT flash your Jeboo_Kernel_i337_v2_2.zip , since I am on MK2 stock kernel/baseband/bootloader....?
Check it out: http://i.imgur.com/cNWijKF.png
7. I mean, what is BELOW MF3/MK2 and ABOVE MDB/MDL? Because it also says, that: All binaries posted here will be loki'd (as signified by the .lok extension).
SO, keeping in mind that Im on Stock MK2 , but also Im ROOTED via SAFEROOT.zip (as you can see in the pic above: (http://i.imgur.com/cNWijKF.png) , can someone please tell me if I should flash this SHOstock v3.0, and more speciafically, WHICH, IF ANY of you jeboo kernels and Jeboo Recovery should I use?
Can I bug any of you to tell me the exact steps on how to get this SHOstock 3.0 on my i337, if I'm on MK2, rooted, and safestrap-ed?
ANy help would be much appreciated
djmisi99 said:
I am very familiar with custom roms and your kernels, from always using them on my SGS2 i777 (AT&T), but i just bought an SGS4 i337 AT&T, on MK2 baseband, and everybody suggested I should install the SHOstock v3.0 for the i337 (http://forum.xda-developers.com/show....php?t=2305752).
Problem is, I am sooooo confused now, because there is jeboo kernels: (Jeboo_Kernel_i337_v3_0a-i.zip, Jeboo_Kernel_i337_v3_0a.zip, Jeboo_Kernel_i337_v3_0.zip, Jeboo_Kernel_i337_v2_2.zip)
...than there's your RECOVERY: Jeboo_Recovery_v2_1.zip
so Im very confused now how I should go about installing our most awesome DEV shoman94's SHOstock v3.0) ROM...==> THAT I DUNNO WHAT SHOULD I DO ANYMORE.....
1. Because, on the thread there (http://forum.xda-developers.com/show....php?t=2305752), in POST#1 it says , in the Instructions, that :We must be running a custom recovery using Jeboo's Recovery from Post#4 which is your Jeboo_Recovery_v2_1.zip
2. But how should I run the Jeboo_Recovery_v2_1.zip RECOVERY, if Im on SafeStrap 3.71 (which is a recovery also)???
3. If i flash Jeboo_Recovery_v2_1.zip, wont that brick (or softbrick) the S4?
4. Or if I flash Jeboo_Recovery_v2_1.zip, will I end up having 2 recoveries? Or will I only end up with having only the Jeboo_Recovery_v2_1 ???
5. In POST#3, it says that:
IF YOUR PHONE HAS MF3/MK2 BOOTLOADERS, YOU MUST RUN THE MF3/MK2 STOCK KERNEL. DO NOT TRY INSTALLING ANYTHING BELOW UNLESS YOU HAVE MDB/MDL BOOTLOADERS THAT SUPPORT LOKI!!
So, should I NOT flash your Jeboo_Kernel_i337_v2_2.zip , since I am on MK2 stock kernel/baseband/bootloader....?
Check it out: http://i.imgur.com/cNWijKF.png
7. I mean, what is BELOW MF3/MK2 and ABOVE MDB/MDL? Because it also says, that: All binaries posted here will be loki'd (as signified by the .lok extension).
SO, keeping in mind that Im on Stock MK2 , but also Im ROOTED via SAFEROOT.zip (as you can see in the pic above: (http://i.imgur.com/cNWijKF.png) , can someone please tell me if I should flash this SHOstock v3.0, and more speciafically, WHICH, IF ANY of you jeboo kernels and Jeboo Recovery should I use?
Can I bug any of you to tell me the exact steps on how to get this SHOstock 3.0 on my i337, if I'm on MK2, rooted, and safestrap-ed?
ANy help would be much appreciated
Click to expand...
Click to collapse
You are making it too hard. You need to be on 3.71 Safestrap to flash Sho's 3.0. You must use default (stock) kernel. You can not flash any other kernels period. And no other recoveries. And no 4.4 or aosp roms. I am not on SafeStrap as I have a MDL phone. So, you need to go the SafeStrap thread and read up on flashing a rom on SafeStrap. There are a couple threads on the subject. Read all you can first and make any backup your phone/recovery allows before flashing. Also, do a clean wipe before installing rom. That may be different then a clean wipe on MDL/Custom Recovery, not sure--:good:
[email protected] said:
You SOL buddy. Sell the phone and get something else. You will never be able to downgrade
MOTO X SLAPPED
Click to expand...
Click to collapse
Problem is it came from AT&T Store with MDL ...but the MK2 update came through OTA...and that must of lock the bootloader....dayummmmmmm...
AM I right?
Yes
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
Phone came from the Store with MDL, ( I see it on the Original box: SoftWare Ver: UCUAMDL....
The guy I bought it from rooted it, and loki-ed it... how did that OTA come through, I wonder? Once rooted and LOKI-ed...the OTAs shouldn't come through, right?
Sounds like the seller messed up and flashed back to stock. He was probably selling it to cut his losses.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
*************************************************************************
THX,
I just saw that the phone originally came with MDL baseband, its on the Original Box...
I wonder, was it with an unlocked bootloader at THAT time?
ANd the MK2 OTA update locked it?
djmisi99 said:
*************************************************************************
THX,
I just saw that the phone originally came with MDL baseband, its on the Original Box...
I wonder, was it with an unlocked bootloader at THAT time?
ANd the MK2 OTA update locked it?
Click to expand...
Click to collapse
Answer, yes & yes. There is plenty of custom roms for mk2 in the All things mk2 guide. You can also upgrade to 4.4.2 Kit Kat now as well. Forget about MDL cause there's no way to go back to it.
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
Red_81 said:
Sounds like the seller messed up and flashed back to stock. He was probably selling it to cut his losses.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
******************************************
But if he had it LOKI-ed, that means he was just fine on MDL, no need for SafeSTrap, unlocked BL prolly ... he was free to install CM, GPE, AOSP, PACman and all these ROMs....so why flash it back to stock MK2? I mean, cutting his losses....that's funny...I mean, unless the MK2 OTA from AT&T came forced.... WHo knows...
He probably didn't know what he was doing, got stuck, and tried to Odin back to stock. Only he used the mk2 package and not the MDL one.
Stuff like that never surprises me anymore. People don't want to learn/read. Just give me the file so I can flash it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
joeybear23 said:
el o el
Click to expand...
Click to collapse
LOL my butt, buddy...we still have SafeStrap ....ab. 30+ ROMz for it...so not exactly eL Oh eL....but oh well....such is life, ya know?
Red_81 said:
He probably didn't know what he was doing, got stuck, and tried to Odin back to stock. Only he used the mk2 package and not the MDL one.
Stuff like that never surprises me anymore. People don't want to learn/read. Just give me the file so I can flash it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I know EXACTLY what you mean, bud...just gimme the file so I can flash it -type ... who cares what's that gonna actually do to my phone...Oh well, there are people...and there's people.... U never know who you get to deal with....
Just ask for a little help, ...why is that so hard, right?
I've been reading up on all I could, and now that I "kinda" get a better understanding of how things lay with the i337 MK2...I can make a decision to flash, and stay stock...
Problem is, I have been flashing since 2009, so I can't imagine owning a droid, AND NOT FLASH IT!!! IT KINDA DEFEATS THE PURPOSE OF OWNING AN ANDROID, right? hehehe
I know that feeling. At least Safestrap is a decent option. I rushed out to grab my MDL 32gb one before they updated their stock.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
KK 4.4 NB1 baseband
John The Rhino said:
Answer, yes & yes. There is plenty of custom roms for mk2 in the All things mk2 guide. You can also upgrade to 4.4.2 Kit Kat now as well. Forget about MDL cause there's no way to go back to it.
Click to expand...
Click to collapse
***************************************
Yes, prolly could upgrade to 4.4 , but would be needing to flash the NB1 modem, baseband first right?
ANd ppl are saying there is not much SafeStrap versions for KK 4.4(.2) yet, or am I wrong?
DO you know any ROMz like that?
Would it be possible to come back to JB 4.3, once on KK, that you know of?
Lemme know, bud...THX
ANy links.....?
I have an SGH-i337 and had an MDL bootloader before moving to Cyanogenmod and then moved on to OC3 bootloader (stock Android 5.0.1). With OC3 bootloader, I did some google search but couldn't find a way to get a custom bootloader as well as root so I can flash into another ROM (the last time I did any unlocking, flashing, and rooting was ~ 2 years ago and methods/tools have changed so I'm not sure what my best options are right now). I read that TWRP doesn't work for newer bootloaders such as OC3 because loki is patched. Any advice/guidance will be much appreciated.
Thank you!
Safestrap is going to be your only option I believe
On MDL, the boot loader could be by-passed with loki, but everything since MDL, including OC3 has a locked bootloader and you are limited to stock kernel. Safestrap allows custom roms that are touchwiz based but no AOSP type roms. Also safestrap only works on 4.4.4 and below, not on 5.0.1. No root method has been discovered or posted for stock 5.0.1, but there is a keeproot upgrade method, so if you want to root, flash back to nb1, and then use the keeproot method.
creepyncrawly said:
On MDL, the boot loader could be by-passed with loki, but everything since MDL, including OC3 has a locked bootloader and you are limited to stock kernel. Safestrap allows custom roms that are touchwiz based but no AOSP type roms. Also safestrap only works on 4.4.4 and below, not on 5.0.1. No root method has been discovered or posted for stock 5.0.1, but there is a keeproot upgrade method, so if you want to root, flash back to nb1, and then use the keeproot method.
Click to expand...
Click to collapse
So even if I flash back to nb1, I can only root it and not be able to flash to either Google Edition or Cyanogenmod (both if which are my ideal ROMs)? Could I not flash back to MDL, unlock the bootloader + root it, then flash to either of these two ROMs?
No now they have nc1 flash for 5.0.1 look at the i337 thread in xda
So I am essentially stuck with the stock AT&T Touchwiz ROM forever unless something like SafeStrap is available for OC3 bootloader? I'd do anything for being able to flash to Cyanogenmod or Google Play Edition--can't believe I flashed to an updated stock ROM by accident and now I lose all ability to flash to a custom ROM...
mindstormer said:
So I am essentially stuck with the stock AT&T Touchwiz ROM forever unless something like SafeStrap is available for OC3 bootloader? I'd do anything for being able to flash to Cyanogenmod or Google Play Edition--can't believe I flashed to an updated stock ROM by accident and now I lose all ability to flash to a custom ROM...
Click to expand...
Click to collapse
Yeah, it sucks and I feel your pain. But you are essentially correct. If you want to stay on Lollipop, then that's pretty much it.
You could flash back to nb1, root and install Safestrap, update to nj4, or install a custom TW based rom on 4.4.4.
You could flash back to nb1, root and use the keeproot method back to OC3, and then at least you'd have rooted Lollipop.
creepyncrawly said:
Yeah, it sucks and I feel your pain. But you are essentially correct. If you want to stay on Lollipop, then that's pretty much it.
You could flash back to nb1, root and install Safestrap, update to nj4, or install a custom TW based rom on 4.4.4.
You could flash back to nb1, root and use the keeproot method back to OC3, and then at least you'd have rooted Lollipop.
Click to expand...
Click to collapse
Thanks for the clarification--I'll check periodically to see if anything is available for OC3/NB1.
The only GPE ROM I've seen work on this phone is the dandvh 4.4.4 one and even then a few things were buggy. Though I enjoyed it.
iB4stid posted goldeneye v53 which is 5.0.1 for our phone which is pre-rooted and deodexed . It's still TouchWiz based, but with it being pre-rooted and deodexed you can use arter97's workaround and get Xposed working!
And lastly, you can use safestrap while on OC3, You just have to flash an Nj4 kernel in Odin, boot to safestrap, perform your actions, and then flash OC3 kernel back so lollipop will boot.
There are instructions for it on here somewhere. I would check in the "general" section. Sorry for not linking it, I'm on mobile.
Trying to use the keeproot method to get from NB1 (rooted) to OC3 (rooted). Problem is I can flash the ROM, but i need to Odin the OC3 bootloader after the ROM is flashed but I cannot find the OC3 bootloader for the life of me, I can only find the newer OK2 bootloader. Please help! Trying to at least get to Goldeneye on my I337!!
Don't tell me to just use the OK2 ROM and bootloader because when I used that to upgrade to Goldeneye I actually lost root access and had to go all the way back to NB1 and that's where I am now. Can I use OC3 Rom with OK2 bootloader??? God it seems like no one cares about I337s, the step-by-step guides are all over the place and quite hard to follow but I know where I'm getting tripped up. Please help!