[Q] odin flashing problem for note3 N9005 - Galaxy Note 3 Q&A, Help & Troubleshooting

tried to flash australian stock rom from sammobile on hongkong note 3, odin failed and phone bricked
then flashed back hongkong one, it worked again. but revalidation look is off.
1- any way to flash australian rom safely?
2- what revalidation look and should it be on?

ahmekh said:
tried to flash australian stock rom from sammobile on hongkong note 3, odin failed and phone bricked
then flashed back hongkong one, it worked again. but revalidation look is off.
1- any way to flash australian rom safely?
2- what revalidation look and should it be on?
Click to expand...
Click to collapse
Did you try to flash the Telstra rom or the XSA rom?
I found flashing Telstra's rom doesn't seem to work...
Also, what version of firmware were you trying to flash?
You can't flash an MI7 rom on an MJ7 bootloader. Just goes into a bootloop... If by some miracle you get to android then usually wifi and phone WONT work. You need MJ7 (or higher) rom on MJ7 bootloader...
Make sure reactivation lock is OFF... You can end up with a brick otherwise..

thanks
ultramag69 said:
Did you try to flash the Telstra rom or the XSA rom?
I found flashing Telstra's rom doesn't seem to work...
Also, what version of firmware were you trying to flash?
You can't flash an MI7 rom on an MJ7 bootloader. Just goes into a bootloop... If by some miracle you get to android then usually wifi and phone WONT work. You need MJ7 (or higher) rom on MJ7 bootloader...
Make sure reactivation lock is OFF... You can end up with a brick otherwise..
Click to expand...
Click to collapse
i tried to flash vodafone MJ7 on hongkong MJ9 but failed.

ahmekh said:
i tried to flash vodafone MJ7 on hongkong MJ9 but failed.
Click to expand...
Click to collapse
- 1st, you cannot flash MJ7 over MJ9. Choose a higher firmware (e.g MK1, MK2, ML1, ML2...) to flash over MJ7.
- 2nd, donot flash carrier's firmware (vodafone). Choose unbrand firmware.

reply
vndnguyen said:
- 1st, you cannot flash MJ7 over MJ9. Choose a higher firmware (e.g MK1, MK2, ML1, ML2...) to flash over MJ7.
- 2nd, donot flash carrier's firmware (vodafone). Choose unbrand firmware.
Click to expand...
Click to collapse
sorry for this basic Q,
when you say MJ7 / MK1, do you read the PDA, CSC or MODEM
thanks

ahmekh said:
sorry for this basic Q,
when you say MJ7 / MK1, do you read the PDA, CSC or MODEM
thanks
Click to expand...
Click to collapse
PDA or AP...to find out...dial *#1234# & see the AP(last 3 characters)

linx1287 said:
PDA or AP...to find out...dial *#1234# & see the AP(last 3 characters)
Click to expand...
Click to collapse
ahmekh said:
sorry for this basic Q,
when you say MJ7 / MK1, do you read the PDA, CSC or MODEM
thanks
Click to expand...
Click to collapse
Not exactly PDA nor CSC nor MODEM... It is the Bootloader version, as you cannot overwrite a bootloader by the older one.
However the firmware usually comes with the "same version" for both the PDA and the bootloader. So in general you can also said it is the PDA version.

MK1. So I need to flash like MK2 and above
Sent from my SM-N9005 using XDA Premium 4 mobile app

ahmekh said:
MK1. So I need to flash like MK2 and above
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what is your phone's region? what firmware are you using (region, version)?

The phone is hongkong TGY MK1. I LIVE IN australia
Sent from my SM-N9005 using XDA Premium 4 mobile app

So far tried multiple roms but unsuccessful although it said PDA MK1 OR MK2. BUT I noticed that theses roms modems are mainly MJ7 and my current one is MJ9.
That may be the reason?
If any one is lucky and was successful in flashing any rom over the honkong TGY one please help me.
Sent from my SM-N9005 using XDA Premium 4 mobile app

Related

[Q] how to update to mj6

Hello, i'm on branded orange mi7 french and would like to unbranded and install last mj6 from england.
So is it possible to unbranded and update without knox 01?
To after root with vroot.
Thanks
Nope sorry. Mj6 will trip the counter. You can still try installing from sammobile and dont root it.
Sent from Note 3 (The beauty & beast)
I went from mj3 malaysian xme to Britain btu mj6 thru Odin and it did not trip my flash counter
Sent from my SM-N9005 using XDA Premium 4 mobile app
patrick92260 said:
I went from mj3 malaysian xme to Britain btu mj6 thru Odin and it did not trip my flash counter
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's right, but try to root it.... You now have the new bootloaders that trip when you root, and if something goes wrong forget using Kies 3 to fix as the newest firmware Malaysia has to date is MJ1, the old bootloader.... Welcome to bootloopssville, population - You....
berju said:
Hello, i'm on branded orange mi7 french and would like to unbranded and install last mj6 from england.
So is it possible to unbranded and update without knox 01?
To after root with vroot.
Thanks
Click to expand...
Click to collapse
I don't know about the branded version, but I succeeded in flashing MJ6-BTU on my french XEF phone. Root is working - Knox is 0x0.
Universal RDLV is able to create the system.img.ext4 and cache.img.ext4 files, but you have to include some other files from the Samsung tar.md5 file or camera and WLAN will be broken. DO NOT include the *.mbn files - DO NOT include the unmodified system.img.ext4 - this would result in Knox 0x1.
gnadenlos said:
I don't know about the branded version, but I succeeded in flashing MJ6-BTU on my french XEF phone. Root is working - Knox is 0x0.
Universal RDLV is able to create the system.img.ext4 and cache.img.ext4 files, but you have to include some other files from the Samsung tar.md5 file or camera and WLAN will be broken. DO NOT include the *.mbn files - DO NOT include the unmodified system.img.ext4 - this would result in Knox 0x1.
Click to expand...
Click to collapse
Hello do you flash a rdlv version or a non modified one?
The safest way to go up (providing you currently have nothing higher than MJ1), is to create a URDLV Firmware, to keep the old boot loader.
Then flash the modem and NON-HLOS file from the original Samsung tar file.
Sent from my SM-N9005 using Tapatalk
berju said:
Hello do you flash a rdlv version or a non modified one?
Click to expand...
Click to collapse
You flash a RDLV version, but you have to add some additional files from the Samsung firmware. At least you have to add NON-HLOS and modem, but in my case this wasn't enough, so I built a new .tar.md5 file with almost everything. The only files I didn't include were the *.mbn files. System+Cache from the RDLV tar.md5, the rest from the Samsung tar.md5 file.
Can i flash mj1 With odin without knox01 and after flash rdlv mj6 or mj7
Thanks
berju said:
Can i flash mj1 With odin without knox01 and after flash rdlv mj6 or mj7
Thanks
Click to expand...
Click to collapse
Start by reading this thread http://forum.xda-developers.com/showthread.php?t=2487916&page=10 at post 93
You will understand how to create your UK MJ7 firmware unbranded and rooted. Don't flash a newer firmware than MJ1 to keep the old bootloader and don't use kingoapp or vroot .... They use an exploit which won't exist anymore when samsung will decide it ! You will be happy to have the old bootloader at this moment ...
geek78 said:
Start by reading this thread http://forum.xda-developers.com/showthread.php?t=2487916&page=10 at post 93
You will understand how to create your UK MJ7 firmware unbranded and rooted. Don't flash a newer firmware than MJ1 to keep the old bootloader and don't use kingoapp or vroot .... They use an exploit which won't exist anymore when samsung will decide it ! You will be happy to have the old bootloader at this moment ...
Click to expand...
Click to collapse
Thank you, i understand that it's important tout keep the old bootloader. So my iinterrogation is about i update my mi7 directly to rdlv mj7 or i update first to mj1 and after to mj7.
Bootloader on mi7 and mj1 is the same?
berju said:
Thank you, i understand that it's important tout keep the old bootloader. So my iinterrogation is about i update my mi7 directly to rdlv mj7 or i update first to mj1 and after to mj7.
Bootloader on mi7 and mj1 is the same?
Click to expand...
Click to collapse
directly
geek78 said:
directly
Click to expand...
Click to collapse
thanks a lot, i'll try this.
Last question, this firmware is rooted ?
It will be rooted by following the process "root de la vega", so before flashing it
geek78 said:
It will be rooted by following the process "root de la vega", so before flashing it
Click to expand...
Click to collapse
Ok thanks, now it's time to read the post and try :good:
geek78 said:
It will be rooted by following the process "root de la vega", so before flashing it
Click to expand...
Click to collapse
hello, just for confirmation i just need put the files on root of internal sd card. I don't need flash AP/CSC because i flash RDLV before ?
I've just flash RDLV MJ7 and now i just try to root.
Thanks again.
EDIT : root is done, just put files reboot... remove and done.
Thanks all for your help !!
patrick92260 said:
I went from mj3 malaysian xme to Britain btu mj6 thru Odin and it did not trip my flash counter
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I bought what I thought was a UK Note 3 (via Amazon UK) but it turns out to be a Malaysian XME one. I've therefore been looking at moving over to the BTU firmware. Was it simply a case of downloading (I've done this from Sammobile) and installing via Odin? Any issues encountered?
Sent from my SM-N9005 using xda app-developers app
anencephal said:
I bought what I thought was a UK Note 3 (via Amazon UK) but it turns out to be a Malaysian XME one. I've therefore been looking at moving over to the BTU firmware. Was it simply a case of downloading (I've done this from Sammobile) and installing via Odin? Any issues encountered?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Hello,
i'm not sure what you want exactly. If i understand your phone is XME and you want BTU ? So if you flash a rom from sammobile with multi-csc your phone rest on XME. You need to flash BTU exclusive one ( i think, ask for confirmation ).
But before flash you need to know if you want root after or customise, because of knox warrantly and new bootloader you can't do this is you don't do the right thing.
You can read this also :
http://forum.xda-developers.com/showpost.php?p=47225951&postcount=112
I think it can be done using this method
http://forum.xda-developers.com/showpost.php?p=47091411&postcount=62&nocache=1&z=5607935257721692

[Q] A couple of questions before flashing rom.

hey.
i have n9005 i have rooted it already and i have some questions.
1.some roms have are only for MJ7 what does MJ7 means?is my device is MJ7 too?how should i know?
2.when i am flashing a rom will my device remains as sim free/region unlocked?
Hi there,
1. MJ7 is simply the last few characters of the firmware version of that ROM. To check your firmware version, it should be in Settings > About Phone and it will show your firmware somewhere.
2. Yes your device will stay region unlocked
Sent from my HTC One using XDA Premium 4 mobile app
VodkaPlease said:
hey.
i have n9005 i have rooted it already and i have some questions.
1.some roms have are only for MJ7 what does MJ7 means?is my device is MJ7 too?how should i know?
2.when i am flashing a rom will my device remains as sim free/region unlocked?
Click to expand...
Click to collapse
1. You can either go to Setting > About or in your dialer, key in *#1234#, check under AP
2. Yes. But do take note if flash custom ROM will trip the Knox counter
KidCarter93 said:
Hi there,
1. MJ7 is simply the last few characters of the firmware version of that ROM. To check your firmware version, it should be in Settings > About Phone and it will show your firmware somewhere.
2. Yes your device will stay region unlocked
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
williamyi said:
1. You can either go to Setting > About or in your dialer, key in *#1234#, check under AP
2. Yes. But do take note if flash custom ROM will trip the Knox counter
Click to expand...
Click to collapse
my version is N9005XXUBMI7 so that means i can't flash MJ7 firmware?
VodkaPlease said:
my version is N9005XXUBMI7 so that means i can't flash MJ7 firmware?
Click to expand...
Click to collapse
You're fine to flash the ROM. ROMs that show any different firmware to yours simply mean that once you flash the ROM, you're firmware will change to the ROMs firmware. Just be sure to carefully read everything in the first post of the ROM thread so that you're a bit more confident with flashing the ROM and understanding the whole process

[Q][Australian]XSA OTA

Does the latest update activate KNOX? I've blocked my phone from OTAs after seeing the chaos caused by Samsung with the euro S4s.
Are you sure xsa is for galaxy s4 i9505?
I can only find xsa for galaxy s3.
The only Australian 4.3 I can find is for optus which is MK9
http://live.samsung-updates.com/index.php?device=GT-I9505
Sent from my GT-I9505 using xda app-developers app
XSA for I9505 is available on Samfirmware (so is the Voda update) and as it's XXUE, yes, it has the 'Knox enabled' bootloader; I.E the one that has gives you this pic in DL mode & at the moment has no way of resetting the Knox warranty if you flash non-stock firmware.
MistahBungle said:
XSA for I9505 is available on Samfirmware (so is the Voda update) and as it's XXUE, yes, it has the 'Knox enabled' bootloader; I.E the one that has gives you this pic in DL mode & at the moment has no way of resetting the Knox warranty if you flash non-stock firmware.
Click to expand...
Click to collapse
Awesome thank Mistah.
I9505XXUEMK9_I9505VAUEMK1_VAU
Obviously that other website not up to date.
Sent from my GT-I9505 using xda app-developers app
No worries
Thanks for the confirmation. I'm totally not updating with official stock firmware anymore.
Unless you're happy with always running a completely stock phone, that's a wise choice
Oniyuri said:
Thanks for the confirmation. I'm totally not updating with official stock firmware anymore.
Click to expand...
Click to collapse

[Q] Questions from newbie, how to update note 3 after rooted

Hi
I just got my NOTE 3, it was already rooted with SUPER SU, and region lock free with Region Lock Away
Android 4.3
Kernel 3.4.0-1628120
Baseband Version N9005XXUBMI5
Build JSS15J.N9005XXUBMJ1
Questions that I have
How do I get updates? it seems OTA is not allowed, and installed kies and same issue not possible
I have checked in SAM mobile and for my country I have the fw available N9005VJUBMI7 , how do I install this fw? Can I just use Mobile ODIN ?
I appreciate your response..
juanpsegurar said:
Hi
I just got my NOTE 3, it was already rooted with SUPER SU, and region lock free with Region Lock Away
Android 4.3
Kernel 3.4.0-1628120
Baseband Version N9005XXUBMI5
Build JSS15J.N9005XXUBMJ1
Questions that I have
How do I get updates? it seems OTA is not allowed, and installed kies and same issue not possible
I have checked in SAM mobile and for my country I have the fw available N9005VJUBMI7 , how do I install this fw? Can I just use Mobile ODIN ?
I appreciate your response..
Click to expand...
Click to collapse
I see that your baseband is MI5, is KNOX still 0x0?
juanpsegurar said:
Hi
I just got my NOTE 3, it was already rooted with SUPER SU, and region lock free with Region Lock Away
Android 4.3
Kernel 3.4.0-1628120
Baseband Version N9005XXUBMI5
Build JSS15J.N9005XXUBMJ1
Questions that I have
How do I get updates? it seems OTA is not allowed, and installed kies and same issue not possible
I have checked in SAM mobile and for my country I have the fw available N9005VJUBMI7 , how do I install this fw? Can I just use Mobile ODIN ?
I appreciate your response..
Click to expand...
Click to collapse
Yes you can odin it, i suggest doing it through ODIN and not the mobile version. You'll have to re-root after
polish_pat said:
Yes you can odin it, i suggest doing it through ODIN and not the mobile version. You'll have to re-root after
Click to expand...
Click to collapse
If KNOX is still 0x0, and you want to keep that, you MUST use Mobile Odin. With Odin and CF root KNOX will become 0x1.
Pierre118 said:
If KNOX is still 0x0, and you want to keep that, you MUST use Mobile Odin. With Odin and CF root KNOX will become 0x1.
Click to expand...
Click to collapse
i'm pretty sure at this point he already tripped knox since hes rooted on MI5 baseband
Pierre118 said:
I see that your baseband is MI5, is KNOX still 0x0?
Click to expand...
Click to collapse
Nope,it is 0x1
juanpsegurar said:
Nope,it is 0x1
Click to expand...
Click to collapse
In that case do what @polish_pat said. Use Odin 3.09 to flash the downloaded firmware, and root it after that.
polish_pat said:
i'm pretty sure at this point he already tripped knox since hes rooted on MI5 baseband
Click to expand...
Click to collapse
It is 0x1, so it would be just Mobile Odin, or Odin and I should have no major issues moving to N9005VJUBMI7 ?
Once Kit Kat becomes available, would be the same?
Thanks Again
juanpsegurar said:
It is 0x1, so it would be just Mobile Odin, or Odin and I should have no major issues moving to N9005VJUBMI7 ?
Once Kit Kat becomes available, would be the same?
Thanks Again
Click to expand...
Click to collapse
The update process should be flawless. If you want, you can also flash polish firmware and have kit kat today, then you can flash a rom like X-Note 10. But if you just want to stay stock rooted, use ODIN to flash stock firmware and re-root afterwards
polish_pat said:
The update process should be flawless. If you want, you can also flash polish firmware and have kit kat today, then you can flash a rom like X-Note 10. But if you just want to stay stock rooted, use ODIN to flash stock firmware and re-root afterwards
Click to expand...
Click to collapse
Thanks, I was still doing some research as I have seen some comments regarding current KK, having lots of bugs..
But for my future reference, I would just download KK and flash it with odin as well?, what about the X-Note ROM, i will need to do some research on this one, but if you can point me on some references will be great to start, as well of know issues, or downsides of this ROM
juanpsegurar said:
Thanks, I was still doing some research as I have seen some comments regarding current KK, having lots of bugs..
But for my future reference, I would just download KK and flash it with odin as well?, what about the X-Note ROM, i will need to do some research on this one, but if you can point me on some references will be great to start, as well of know issues, or downsides of this ROM
Click to expand...
Click to collapse
KK has no bugs for me. As for xnote, go in dev section and look at development thread for the rom
polish_pat said:
KK has no bugs for me. As for xnote, go in dev section and look at development thread for the rom
Click to expand...
Click to collapse
You keep giving advice to people that have N9005 without even ****ing mentioning that you have the N900W8 phone where the bootloader (and a lot of other stuff) is different
xclub_101 said:
You keep giving advice to people that have N9005 without even ****ing mentioning that you have the N900W8 phone where the bootloader (and a lot of other stuff) is different
Click to expand...
Click to collapse
It's the same phone! The bootloader has nothing to do with anything, its only relevant when we talk about upgrading and downgrading. The guy just wants to upgrade to KK, he can go in xnote thread and there are instructions for the upgrade, and in case you didnt know, xnote is designed for 9005 and W8 is not officially supported, so next time you try to open your little piehole, do your research first
Need help
Pierre118 said:
In that case do what @polish_pat said. Use Odin 3.09 to flash the downloaded firmware, and root it after that.
Click to expand...
Click to collapse
I got stuck wiht odin and kit kat the german version, ODIN fails at around 90 %
Current in ODIN 3.9
Error that i got..
hidden .img.ext4
FAIL!(size)
Complete (write) operation Failed.
HELP
juanpsegurar said:
I got stuck wiht odin and kit kat the german version, ODIN fails at around 90 %
HELP
Click to expand...
Click to collapse
What's it say? I think u should flash firmware Poland first. I flash from 4.3 to 4.4.2 with firmware Poland everything is working
hhai2pth said:
What's it say? I think u should flash firmware Poland first. I flash from 4.3 to 4.4.2 with firmware Poland everything is working
Click to expand...
Click to collapse
Error that i got..
hidden .img.ext4
FAIL!(size)
Complete (write) operation Failed.
juanpsegurar said:
Error that i got..
hidden .img.ext4
FAIL!(size)
Complete (write) operation Failed.
Click to expand...
Click to collapse
U should reflash new KK rom with Odin and make sure Kies not running background

[Q] Flashing new modem

Hi all,
I'm trying to find the best modem for my country (Italy).
Actually I'm on XUEND3 ROM rooted with towel root, using XUENC2 modem and with Knox 0x0..
But I don't like this modem at all.
Can someone suggest the best modem for Italy?
Where can I download it? (on samMobile I can find only ROMS).
Can I flash it with MOP without tripping Knox?
Thanks in advance for the help.
raistlin74 said:
Hi all,
I'm trying to find the best modem for my country (Italy).
Actually I'm on XUEND3 ROM rooted with towel root, using XUENC2 modem and with Knox 0x0..
But I don't like this modem at all.
Can someone suggest the best modem for Italy?
Where can I download it? (on samMobile I can find only ROMS).
Can I flash it with MOP without tripping Knox?
Thanks in advance for the help.
Click to expand...
Click to collapse
take NF2 or NG2 modem but it goes well with NF4 rom (look my signature)
look in alexandr or civato thread for dl it
odin obligatory
raistlin74 said:
Hi all,
I'm trying to find the best modem for my country (Italy).
Actually I'm on XUEND3 ROM rooted with towel root, using XUENC2 modem and with Knox 0x0..
But I don't like this modem at all.
Can someone suggest the best modem for Italy?
Where can I download it? (on samMobile I can find only ROMS).
Can I flash it with MOP without tripping Knox?
Thanks in advance for the help.
Click to expand...
Click to collapse
1- Could you point out why you didn't like this modem? Any problem or disadvantage?
From the end user's point of view, I think it is hard to distinguish between modem versions.
2- You can download firmware from sammobile, extract it to get modem.bin file and NON-HLOS.bin file to flash.
3- To get the latest firmware for your device, you can install Phone INFO ★Samsung★ app, then open 'Firmware Browser' menu.
raistlin74 said:
Hi all,
I'm trying to find the best modem for my country (Italy).
Actually I'm on XUEND3 ROM rooted with towel root, using XUENC2 modem and with Knox 0x0..
But I don't like this modem at all.
Can someone suggest the best modem for Italy?
Where can I download it? (on samMobile I can find only ROMS).
Can I flash it with MOP without tripping Knox?
Thanks in advance for the help.
Click to expand...
Click to collapse
Im using NG2 modem over NF4 and seems working fine with wind italy, ciao
Edit: the only modem i get signal at flaminio train station so u know the difference and what im talkin about as i see you are from rome too
Sent from my SM-N9005 using XDA Premium 4 mobile app
Best Modem for me is the NF2 on NG2 Firmware
Hi all,
thanks for the answers.
I don't like this modem because it never goes in 4G (I have TIM) and often when I try to call it says "Not registered on the network", expecially when I end a call and I try immediately to do another call.
I don't want to change ROM because I need to root/unroot often to use SkyGo, so I need a ROM that can be rooted easily.
So if I understood well :
the best modem is NG2. Also for my ROM?
I need to use Odin to flash modem. Does it change Knox value?
I need to extract from the ROM, modem.bin file and NON-HLOS.bin. Where do I have to put in Odin to flash it?
Thanks again.
rayman95 said:
take NF2 or NG2 modem but it goes well with NF4 rom (look my signature)
look in alexandr or civato thread for dl it
odin obligatory
Click to expand...
Click to collapse
Hi rayman, I cannot find civato's or alexandr's posts.
Can you address me to the correct posts?
Thanks
raistlin74 said:
Hi all,
thanks for the answers.
I don't like this modem because it never goes in 4G (I have TIM) and often when I try to call it says "Not registered on the network", expecially when I end a call and I try immediately to do another call.
I don't want to change ROM because I need to root/unroot often to use SkyGo, so I need a ROM that can be rooted easily.
So if I understood well :
the best modem is NG2. Also for my ROM?
I need to use Odin to flash modem. Does it change Knox value?
I need to extract from the ROM, modem.bin file and NON-HLOS.bin. Where do I have to put in Odin to flash it?
Thanks again.
Click to expand...
Click to collapse
1: turn off phone
2: remove battery
3: put battery back and go download mode
4: in odin put modem.bin in CP
5: do same for non-hlos
Ps: no idea if knox will get tripped my knox was is tripped first day i bought the phone. Goodluck
Sent from my SM-N9005 using XDA Premium 4 mobile app
meawww said:
1: turn off phone
2: remove battery
3: put battery back and go download mode
4: in odin put modem.bin in CP
5: do same for non-hlos
Ps: no idea if knox will get tripped my knox was is tripped first day i bought the phone. Goodluck
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ihihihiih just readed about the flaminio's train station
So it seems to be a good italian modem
Thanks
raistlin74 said:
Hi rayman, I cannot find civato's or alexandr's posts.
Can you address me to the correct posts?
Thanks
Click to expand...
Click to collapse
here we go https://www.dropbox.com/s/21df5bapyeap779/CP_N9005XXUFNG2.tar.md5
thanks to alexandr
ciao

Categories

Resources