Hey guys,
Yesterday I tried unlocking my phone using the tools provided on this forum, but somehow my device got hard bricked.
It is just laying there with a black screen. It won't turn on, won't boot into recovery or emergency mode. Nothing.
But when I connected it to my PC (running Windows 7), I did hear the sound that it recognised it as a device, it just couldn't find any drivers for it, so I wen't to look into that.
Landed on the debricking method using QPTS on the CyanogenMod forums and I managed to find drivers for Windows 7, so no need for an XP computer!
There were some other Optimus L-series brickers who gave up on the process, but I have still some hope left.
Did all the work that had to be done, decompiled V20D KDZ for our device, converted the first 512 bytes of the partition.bin to .mbn, installed QPTS, and so forth.
Hooked up my phone to the pc holding the volume-down button, and QPTS actually recognised it as a phone in downloading mode!
Then that's where I got stuck. Using the HEX files from this thread, I get the following error:
Code:
Status: Software Download Aborted
Errors: Could not determine the HEX file's scrambling method. The file is invalid.
Do any of you have a clue on how get things working again?
The QPTS tool only lists MSM7x30 (eMMC) as ARMPRG to use for the phone in dowload mode, not the MSM7x27a we are using. Might this be part of the problem?
Any help is highly appreciated!
Can you go to emergency or download mode?
Battery taken out, hold the vol up + connect to usb, connected to the pc. Then you will see in a green screen with emergency mode.
Once your done that, be sure you installed the LG drivers, flashed through kdz.
You can use homero's v20 stock, it's already had cwm and unlock bootloader and v20 baseband.
http://forum.xda-developers.com/showthread.php?t=2214717
Sent from my LG-P700 using Tapatalk
vaikz said:
Can you go to emergency or download mode?
Battery taken out, hold the vol up + connect to usb, connected to the pc. Then you will see in a green screen with emergency mode.
Once your done that, be sure you installed the LG drivers, flashed through kdz.
You can use homero's v20 stock, it's already had cwm and unlock bootloader and v20 baseband.
http://forum.xda-developers.com/showthread.php?t=2214717
Click to expand...
Click to collapse
Nope, can't get into emergency mode, screen stays black, no matter what. So yeah, just flashing a new KDZ isn't an option. :crying:
balloon27 said:
Nope, can't get into emergency mode, screen stays black, no matter what. So yeah, just flashing a new KDZ isn't an option. :crying:
Click to expand...
Click to collapse
Does the kdz flasher recognized the phone? If it's turn on and connected to the PC.
balloon27 said:
Nope, can't get into emergency mode, screen stays black, no matter what. So yeah, just flashing a new KDZ isn't an option. :crying:
Click to expand...
Click to collapse
You should try launching emergency mode some more. Install lg drivers. Take out battery, hold Vol up button and plug in usb. Make sure port works.
Thanks for the replies, guys!
vaikz said:
Does the kdz flasher recognized the phone? If it's turn on and connected to the PC.
Click to expand...
Click to collapse
I can't turn the device on. When I connect it to the PC, Windows sees the phone as an 'Unknown Device', even with the latest LG drivers installed.
And by KDZ flasher you mean the BC2App, right?
Lukijs said:
You should try launching emergency mode some more. Install lg drivers. Take out battery, hold Vol up button and plug in usb. Make sure port works.
Click to expand...
Click to collapse
Tried it a dozen times, with different combinations too. Only thing that happens is the sound windows makes when a device is plugged in.
Any chance a method like this would work? If the .img.zx file would be edited for our device ofcourse.
Hey all,
I couldn't get any further debricking my phone myself, so I just brought it to a repair shop. I'm hoping they can do something using JTAG or something.
Regardless of getting my phone working again (hopefully), I would still love to see if we can find a way to debrick hard bricked devices. If we can find a solution, I'll volunteer for writing a tutorial
Sent from my Nexus 7 using xda app-developers app
Related
I installed 10k rooted on my P705 and was about to install a custom recovery, when the phone came on it was in emergency mode but the computer could no longer detect it, I have tried all the usb ports on about 4 computers and changed the cable trice, So I'm a little bit sure it's nothing to do with the pc. I have tried putting it on holding volume + and -. Any help will be really appreciated because I am stuck right now.
I have gone through the forum for like 6 hours, I couldn't find anything , I apologize before hand if this was treated elsewhere.
Did you try flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher) while in emergency mode?
Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers
yes I did try to flash it but the computer doesn't detect it in the first place. So I get a " no phone found"
kevios12 said:
Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers
Click to expand...
Click to collapse
thank you but that didn't work either
Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the LG MOBILE SUPPORT TOOL.
I'm not familiar with it, but I read here that it's an alternative to Software update.
need4steer said:
Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the ...
I'm not familiar with it, but I read here that it's an alternative to Software update.
Click to expand...
Click to collapse
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....
I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL.
use another computer, maybe a problem with your OS (windows)
need4steer said:
I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL[/URL].
Click to expand...
Click to collapse
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................
d-hammer said:
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................
Click to expand...
Click to collapse
Okay, I got it.
Did you install the latest drivers?
If not, you can do so by downloading and installing them from your support site or by downloading and installing LG PC SUITE.
After that please open device manager and see if there's anything there with an exclamation or a question mark. If there is, please don't continue and post back what it is.
Only when you see that everything is okay, disconnect your phone, turn it off, enter into emergency mode (by clicking volume up + volume down + power button), make sure that you're in emergency mode (the yellow screen), connect your phone, run Software update [KDZ] (KDZ-Flasher), make sure to set the right type (CDMA / 3GQCT), make sure to leave the PhoneMode in DIAG, browse your kdz stock firmware file, and then click on "Lunch software update".
I'll be looking forward for your comment.
Please don't give up!
luthfi_11 said:
use another computer, maybe a problem with your OS (windows)
Click to expand...
Click to collapse
thanks but I actually tried it on linux, it didn't detect it either.
d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
i have no problem with windows 7 & windows 8, just try another computer bro
d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
Try what I suggested above.
Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
d-hammer said:
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....
Click to expand...
Click to collapse
u fixed your phone or not. plz help. I'm also stuck in same problem.
diwaker0 said:
Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
u fixed your phone or not. plz help. I'm also stuck in same problem.
Click to expand...
Click to collapse
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....
I think he did not check usb debugging so cant find phone
Not sure if it will work but no harm trying at this stage:
take out batteries,
wait for 30s,
put it back,
hold power and volume down
when keys light up, touch menu button (not the home button)
feel vibrate?
LOL!
pwhitpod3 said:
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....
Click to expand...
Click to collapse
K. A couple weeks later- for those of you with l45c:
You will get to the point where you find that LGNPST is the only thing that will flash. Having troubles registering the .dll? That cost me
over a week. Move the dll to your system/lg electronics/lgnpst folder and open the cmd window (terminal screen) as administrator.
Edit: Use the command> regsvr32 "name of dll".dll
You should google the regsvr command, as it is different for 64 bit machines, and there is a different system file to put the dll in..
Trouble is, we have no proper dll for the 45c. I tried the ms690 dll with an ms690 bin. Unfortunately, it flashed all the way through- and
now I have a perma-black screen... so don't try that.
I DO have an LGL45C-CT2 binary.... just no dll for the 45c, as usual. Not that it would matter- LGNPST cant see phone any more than
ADB could- there is no more 'emergency download'. I will check the battery, etc...
Morale of story- once again, there is evidence that the l45c is not supported. It is not an MS690, and probably not a P690... Use
LGNPST at your own risk, but quit pounding your head over other methods! Time wasted...
Until next time... keep hacking....
<del>
i researched on xda and the whole google articles but found no post as this....
i literally cant enter into lg's emergency mode.. tired many methods and button combination no use...
tried to use kdz but device not found...
neither when i connect i get to hear the new hardware sound
plz help if u can..!!!:crying:
TonyMatt said:
i researched on xda and the whole google articles but found no post as this....
i literally cant enter into lg's emergency mode.. tired many methods and button combination no use...
tried to use kdz but device not found...
neither when i connect i get to hear the new hardware sound
plz help if u can..!!!:crying:
Click to expand...
Click to collapse
1.-uninstall the drivers and programs lg l7 on your pc.
restart your pc, and reinstall all programs and drives
for your pc to recognize the phone.
2.-remove the battery, press the power button and volume + and connect the phone to the pc, buttons go into emergency mode
Try this a few times.
you may need to perform step 2 more times
why are you trying to enter emergency mode ?
TonyMatt said:
i researched on xda and the whole google articles but found no post as this....
i literally cant enter into lg's emergency mode.. tired many methods and button combination no use...
tried to use kdz but device not found...
neither when i connect i get to hear the new hardware sound
plz help if u can..!!!:crying:
Click to expand...
Click to collapse
what are you trying to do with your phone to begin with ?
what system are you running on your pc ?
assuming its windows
do what he said and then see if any unknown devices (or with yellow triangle) in device manager.
post results
details ...
lokopol said:
1.-uninstall the drivers and programs lg l7 on your pc.
restart your pc, and reinstall all programs and drives
for your pc to recognize the phone.
2.-remove the battery, press the power button and volume + and connect the phone to the pc, buttons go into emergency mode
Try this a few times.
you may need to perform step 2 more times
Click to expand...
Click to collapse
i did try it many times till date havent succeeded...
IGGYVIP said:
what are you trying to do with your phone to begin with ?
what system are you running on your pc ?
assuming its windows
do what he said and then see if any unknown devices (or with yellow triangle) in device manager.
post results
details ...
Click to expand...
Click to collapse
i was running the stock version rooted on my phone.. i was doing a shutdown procedure to complete 2nd partitions script mounting. after shutting it down my phone never started. dats y i tried getting into the emergency mode to flash stock rom if in case of soft brick..
im using win7 and stock rom on my phone. moreover on connection with my computer it doesnt recognize my phone now...
TonyMatt said:
i was running the stock version rooted on my phone.. i was doing a shutdown procedure to complete 2nd partitions script mounting. after shutting it down my phone never started. dats y i tried getting into the emergency mode to flash stock rom if in case of soft brick..
im using win7 and stock rom on my phone. moreover on connection with my computer it doesnt recognize my phone now...
Click to expand...
Click to collapse
is your phone in bootloop ? or does it display blank screen ? (black or white)
did you try to remove sdcard ?
did you try to hard-reset ?
can you try to remove anything related to lg from your pc ? (all programs and drivers)
do you have qmemo button on top of volume buttons ? you can try to enter safe mode (most scripts will not work in this mode so you might get lucky)
@TonyMatt
Hi all,
I have a serious problem with my G2 which I could not solve: I used the new LG Flash Tool 2014 with stock KDZ file, everything was going just fine till I received an error message that LG server is not available, I disconnected the USB cable by mistake from my G2 and afterward I saw that it was in the middle of flashing process (12% was completed). I turned it off and tried to reach download mode again and nothing!, I'm receiving the "LG" logo and nothing- the screen goes black (it is still on).
I tried also to connect my phone to the computer- I received a list of 13 "new" local disks "H" to "T", only "H" disk is available and it's showing "image" folder with list of files.
I cannot reach "download mode", nothing is working!
I hope this is not the end for my G2..
please help me
Thank you so much!
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
wulsic said:
If you could receive all those hard disks then you could maybe fix it with linux/ubuntu if you have it. Search for guides to cOpy the neccesary stuff bacK like the bootloader. I can't really help you atm as i am too sleepy.
Click to expand...
Click to collapse
Thank you for your reply. I found this on the sticky threads: "[FIX] NO Recovery mode, No download mode, after OTA on rooted LG G2".
I installed ubuntu and followed the instructions. when I type the following: "gdisk -l /dev/sde" I receive an error message:
"GPT fdisk (gdisk) version 0.5.1
NOTE: Write test failed with error number 13. It will be impossible to save
changes to this disk's partition table!
Problem opening /dev/sde for reading! Error is 13
You must run this program as root or use sudo!"
My device is not rooted, is this the problem?
Please help me!!
Thanks
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
wulsic said:
@NNCa It says you need to run the program as root on ubuntu.
Just use sudo in front of the commands.
You need to type once your password to use sudo, you can't see the password if you enter it for safety I guess but just click enter after you typed ykur password.
Click to expand...
Click to collapse
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
NNCa said:
Thank you so much!!
I succeeded to push all the files according to this thread, however I do not see the TWRP menu. I have just constant "LG" logo on screen.
Do I miss something?
Thanks!
Click to expand...
Click to collapse
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
wulsic said:
Well its good you're an step further, try to reboot to recovery using power+volume down i believe or its up idk try both it should say something about wipe data factory reset, press the power button and you are in recovery.
Click to expand...
Click to collapse
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
NNCa said:
Hi,
I powered off my phone by pressing volume down + power for a while ("LG" logo blinked once and phone was fully powered off).
I pushed volume down + power till I saw the LG logo, released it, and pushed again- and finally I reached the Factory Hard Reset screen. I have pushed 3 times the power, and I have got "Factory reset processing..." and nothing is appeared, even when I'm pushing several times on power again.
I guess this is the end of my G2 :crying:
Thank you all for your support, this is an excellent forum!:good::good:
Click to expand...
Click to collapse
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
wulsic said:
Nope it isn't the end try to install the recovery again or try to push the custom twrp recovery again to the right partition! Dont give up that fast when i hear your things then its still fixable! you already got the factory reset processing so try to Push the Recovery again and search for an guide about recovery maybe Then you would probably get your device fixed.
Just read my things about simplicity so think easy and you can fix it. AND STAY POSITIVE You will repair your phone today :good:
Click to expand...
Click to collapse
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
NNCa said:
Thanks, but after connecting the device to linux/windows, it seems that it is not recongized, I do not see the partitions anymore even when typing "ls /dev/sd*" through linux terminal..
Click to expand...
Click to collapse
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
wulsic said:
Yeah because the phone has bootloader etc again so maybe you can try this:
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
NNCa said:
Hi there,
I tried to flash my phone using the lg flash tool, unfortunately it cannot recognized any connected device through USB.. I don't know what else will work for my device
Click to expand...
Click to collapse
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
wulsic said:
Did you already installed the LG drivers? and checked in device manager or there is like any change when you connect and disconnect your phone?
Click to expand...
Click to collapse
Yes, I checked it- no response during connecting/disconnecting the device..
Maybe I did a mistake when trying to push those image files.. I guess there is nothing I can do to fix my phone..
Do you have any other suggestions?
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
NNCa said:
Can someone please help me. How can I get to the LG device- Is there another software I can use to flash files into this device?
Thanks
Click to expand...
Click to collapse
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
wulsic said:
Sorry for late reaction but i needed to think of something. Did you tryed to use another cable? Did you tryed to do it on another pc? Did you tryed to maybe install LG PC suite and see if it gets recognized? If you have the PC Suite you may need to turn it off in the LG flashtool idk. Can you tell us more like which windows you have?
Click to expand...
Click to collapse
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
NNCa said:
Hi,
I tried all you suggested, however my devide is not recognized. I tried to use the LG PC Suite and to flash by IMEI, however it is still saying that no device was connected.. I checked windows device manager, and nothing changed there.
There is any chnage I can see my connected device? use some tool or another software?
Thank you again for your patience and help!
Click to expand...
Click to collapse
Hi, sorry to say but you have unfortunately completely hardbricked your device. It happened to me too however I was able to get it replaced under warranty at no extra cost.
What happened was that when your phone was still detected by linux, you had a chance to recover by flashing the correct partitions to gain access to download mode and from there, flash a KDZ to go back to complete stock. However, the files you used were probably incompatible with your variant which has now corrupted your bootloader sequence. I suggest you read this reply by fizzy177 as well as the rest of the thread: http://forum.xda-developers.com/showpost.php?p=51522304&postcount=118
So right now, you cannot do anything as you have already found out, no computer will recognise that your phone is plugged in. Your phone fails to boot when you try enter the download mode and it just freezes on the splash screen which looks like this: http://www.lg-phones.org/wp-content/uploads/2014/03/image2.png
What's meant to happen is your phone should load past that initial splash screen into this http://www.androiddunya.com/wp-content/uploads/2014/01/LG-G2-DownloadMode.jpg which accepts KDZ flashing and warns the device has been rooted.
So it's a blessing that your phone cannot boot as LG cannot find out you have voided warranty and you will be able to get a replacement free of charge.
Issue was solved- device was fixed under warranty
Hi,
I just want to update you all that my device was fixed under warranty! (motherboard replacement)
Thank you all for help and great support, this is a great forum with great community :good::good:
Hello
From past 2 weeks i am wondering on internet for a solution . Hours and hours of surfing and articles but still
Hope some one solve this issue.
Okay. First i m using LG G2 F320 K update to lollipop . Non rooted. It was working fine . I can transfer files in MTP .
But about a month ago i get an update for my phone . And after some days i need to transfer some files to my phone , i wonder when i connected my phone to computer nothing happened . No notification on mobile for changing PTP MTP option . Also nothing happened in Computer device manager..
From that day i am unable to connect my phone with windows 10. It always charging mobile.
I uninstalled all drivers in device manager and installed from LG website. I updates windows N and NK MTP update from windows for windows 10.
I changed different data cables and different computers and different ports . All stuff i can do. Still no luck.
When ever i plug USB data cable it always put my Mobile on Charging . No notification on Mobile. Also i go in setting > storage> and there is no option in upper right corner to select USB PC connection .
I am in developer mode and debugging mode is on also. Also USB tethering option is Disabled .
Kindly some one help me regarding this.
LG G2 F320K updated to stock Koren lollipop 5.0.1 . Non root.( i updated lollipop in April 2015)
Issue i am facing is no notification for Charging/ MTP/PTP Usb Debugging on mobile notice bar when i attach my phone using USB cord with computer. Also in computer device manager nothing happen. Even i checked on windows 10 , 8.1, 8, 7 .
I remember it was working like charm 4 weeks before I can change MTP PTP or Charge only mode by selecting notification when i attach it to my laptop. I can transfer files can use LG PC suit .
Then i received an software update like 40 mb and i updated my mobile. That i remembered.
After that 2 weeks before i need to transfer some books from laptop to my mobile. When i plugged my device there no notification to select MTP mode . Also there is nothing happened in my windows 10. I looked in task manager. No yellow icon in computer task manager for driver thing.
Laptop is just silent and mobile is just on charging .
Then i go to setting in LG and looked for USB PC connection settings. I wonder there is nothing . Settings > storage > 3 dot in upper right corner.. it suppose to be there . But here is no 3 dot in storage. Then i looked into share and networks in android setting and i found that USB tethering. But its faded mean it is disabled and i am unable to use this feature also.
I tried on different computers different cables , original, but nothing. Always when i plug usb mobile went on charging and in all computers nothing happen in device manager.
USB debugging is on.. I factory reset device 2 times. but useless. Also i uninstall all drivers from my laptop and then reinstall drivers from LG website also i tried google drivers , ABD, different ports. Nothing nothing happen.
Also now if i try put mobile on download mode by turning device off and then push + vol button and then put cord in mobile . No download mode also it went on charging. Well charging from laptop or from charger is okay.
Hope i explain all.
I was trying to install a custom recovery (twrp) by several different methods, with absolutely no luck (but that's another secondary issue at this point) and i screwed something up. Not exactly sure but i think the last thing I did was:
using "Rashr - Flash Tool" i think i went to "flash kernel from storage" then flashed boot.img.
now the phone goes immediately, directly into fastboot even without being connected to computer.
so i tried getting into the stock recovery by holding "volume down" and "power" until lg logo, releasing the reholding until factory reset screen. after choosing yes 2 times i get a
"boot certicification verify" or something message for about a second then it goes to this screen (sorry but apparently i haven't had enough posts on the forums to include clickable links.)
h**ps://drive.google.com/file/d/0BwQdFsCQ9KZVaGM1eWdJb25WVVU/view?usp=sharing
slplsnphx said:
I was trying to install a custom recovery (twrp) by several different methods, with absolutely no luck (but that's another secondary issue at this point) and i screwed something up. Not exactly sure but i think the last thing I did was:
using "Rashr - Flash Tool" i think i went to "flash kernel from storage" then flashed boot.img.
now the phone goes immediately, directly into fastboot even without being connected to computer.
so i tried getting into the stock recovery by holding "volume down" and "power" until lg logo, releasing the reholding until factory reset screen. after choosing yes 2 times i get a
"boot certicification verify" or something message for about a second then it goes to this screen (sorry but apparently i haven't had enough posts on the forums to include clickable links.)
h**ps://drive.google.com/file/d/0BwQdFsCQ9KZVaGM1eWdJb25WVVU/view?usp=sharing
Click to expand...
Click to collapse
if u still have acces to fastboot use this or u see many disk at windows use srktool http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
amin44 said:
if u still have acces to fastboot use this or u see many disk at windows use srktool http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Click to expand...
Click to collapse
ok, i do have access to fastboot (actually, as soon as i power it on, it immediately is in foastboot mode, even without being connected to computer). i tried using srktool's repair tools via fastboot. it seems like it's working (ie phone shows that it receives command) but that's it. does it take a loooooong time or something?
btw, i can also get into download mode by holding "vol up" while plugging into computer. so, i tried using srktool utilites via download mode and nothing.
also, i just noticed that while connected to computer in download mode, in device manager it shows G2 under "portable devices" with an exclamation point on it.
slplsnphx said:
ok, i do have access to fastboot (actually, as soon as i power it on, it immediately is in foastboot mode, even without being connected to computer). i tried using srktool's repair tools via fastboot. it seems like it's working (ie phone shows that it receives command) but that's it. does it take a loooooong time or something?
btw, i can also get into download mode by holding "vol up" while plugging into computer. so, i tried using srktool utilites via download mode and nothing.
also, i just noticed that while connected to computer in download mode, in device manager it shows G2 under "portable devices" with an exclamation point on it.
Click to expand...
Click to collapse
are u sure u do not have franken phone open battery cover and see model written inside motherbord
amin44 said:
are u sure u do not have franken phone open battery cover and see model written inside motherbord
Click to expand...
Click to collapse
I haven't taken the back off (yet) but all indications are that it's an AT&T (D800).
What part of my description makes you think that it might be a franken phone?
Did you try connecting the phone in download mode or fastboot to the LG Mobile Support Tool and performing an upgrade recovery?
audit13 said:
Did you try connecting the phone in download mode or fastboot to the LG Mobile Support Tool and performing an upgrade recovery?
Click to expand...
Click to collapse
not sure what you mean by "lg mobile support tool". i googled it and found and installed "lg pc suite". is that the same thing?
nevermind that last question. i found and installed and tried the upgrade recovery tool but for some reason the phone wont go into download mode anymore. when i power it up whith ""vol +" help down, it shows download mode for a second, but then goes right into fastboot mode.
Is it recognized by the program in fastboot mode?
Here's the program I was referring to: http://www.lg.com/ca_en/support-mobile/lg-LGD803
Even though the program says it is for the 803, I used it to recover my international d802.
slplsnphx said:
not sure what you mean by "lg mobile support tool". i googled it and found and installed "lg pc suite". is that the same thing?
nevermind that last question. i found and installed and tried the upgrade recovery tool but for some reason the phone wont go into download mode anymore. when i power it up whith ""vol +" help down, it shows download mode for a second, but then goes right into fastboot mode.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
amin44 said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
Thanks for the reply! But when I have phone connected to USB in fastboot, it shows up in device manager as "android device > USB modem phone port". Is that method the right fix for my situation?
ok, so likei said my phone is indeed in fastboot mode, connected to computer via usb (shows up in device manager as "android device > USB modem phone port". using srktool, i can send commands to the phone (command shows up on phone but thats it.....doesnt matter what command, it just sticks there until i unplug the phone then srktool shows the operation competed and phone shows
https://drive.google.com/file/d/0BwQdFsCQ9KZVSVg3OTZLcXV0N0E/view?usp=sharing
but none of operations actually complete on the phone.
slplsnphx said:
Thanks for the reply! But when I have phone connected to USB in fastboot, it shows up in device manager as "android device > USB modem phone port". Is that method the right fix for my situation?
Click to expand...
Click to collapse
that method fix for all situation
amin44 said:
that method fix for all situation
Click to expand...
Click to collapse
ok i shorted the capacitors, and eventually have gotten to where i can get into twrp. i assume that is serious progress, but what do i need to do next?
slplsnphx said:
ok i shorted the capacitors, and eventually have gotten to where i can get into twrp. i assume that is serious progress, but what do i need to do next?
Click to expand...
Click to collapse
flash stock ROM via download mode or flash custom ROM via twrp.
the first choice (stock ROM) is better
thanks for the responses!!
before i saw your reply, i flashed the stock .tot firmware and now i have my phone back.
but, before all this started, it was lollipop(5.0.2) and now it's Jellybean(4.2.2). i bought phone on ebay, so im assuming that it got lollipop via an ota update. so now i'm looking into flashing it back to lollipop. what's the easiest method to install stock lollipop?
Hello,
I want upgrade my LG G2 with a new rom 5.xX
This phone have only the operator update. No custom, no trwp, nothing...
I installed drivers and when i want access to download mode. I can't. I use the good proccess with vol up then plug usb cable always with vol up presses.
follow this procces after a little moment my phone show me battery logo charging.
So i can't access to download mode.
I would use this process
t was NOT bricked. I finally tried playing around with the LG Mobile Support Tool (B2CAppSetup.exe). Of course it detected that my phone already had the latest firmware from T-Mobile, but then I clicked Options>Upgrade Recovery.
It downloaded for a while then I noticed it had put my phone into download mode (it said "Rooted" in red letters at the bottom). Then it flashed the same firmware over and I immediately tested, it entered download mode right away. But I didn't end up needing that as Stumproot was able to brute force it now after the recovery flash.
Anyway, I couldn't find an answer anywhere else. Most results also have a bricked phone, but that wasn't my issue. This solved my problem and maybe it could work for others.
but it's impossible for me to install B2appsetup on my pc the installation begin then stop after 5s then nothing.
I have Win 10.
Do you have a solution for me , please??
poupinej said:
Hello,
I want upgrade my LG G2 with a new rom 5.xX
This phone have only the operator update. No custom, no trwp, nothing...
I installed drivers and when i want access to download mode. I can't. I use the good proccess with vol up then plug usb cable always with vol up presses.
follow this procces after a little moment my phone show me battery logo charging.
So i can't access to download mode.
I would use this process
t was NOT bricked. I finally tried playing around with the LG Mobile Support Tool (B2CAppSetup.exe). Of course it detected that my phone already had the latest firmware from T-Mobile, but then I clicked Options>Upgrade Recovery.
It downloaded for a while then I noticed it had put my phone into download mode (it said "Rooted" in red letters at the bottom). Then it flashed the same firmware over and I immediately tested, it entered download mode right away. But I didn't end up needing that as Stumproot was able to brute force it now after the recovery flash.
Anyway, I couldn't find an answer anywhere else. Most results also have a bricked phone, but that wasn't my issue. This solved my problem and maybe it could work for others.
but it's impossible for me to install B2appsetup on my pc the installation begin then stop after 5s then nothing.
I have Win 10.
Do you have a solution for me , please??
Click to expand...
Click to collapse
so you have tmobile. right?
and only 5.0.2 lillipop is availabe stock.. if you go asop or cm the theres 5.1.1- 6.0
then do what the guide says to do here.
http://forum.xda-developers.com/showthread.php?t=2432476
I can't do that because I don't have the download mode
poupinej said:
I can't do that because I don't have the download mode
Click to expand...
Click to collapse
try the skr tools , with the nuke download . read as i havent used it but i read that might bring download. the other way is to short circuit the motherboard.. but ill go read skr tools if i was you.