Hi guys!
After i've installed CWM for my LG F320 i got stucked on a blackscreen just after the LG logo, i have no recovery no download mode no fastboot and when i plug my phone on the computer i got nothing at all, is it over?
moimoi39 said:
Hi guys!
After i've installed CWM for my LG F320 i got stucked on a blackscreen just after the LG logo, i have no recovery no download mode no fastboot and when i plug my phone on the computer i got nothing at all, is it over?
Click to expand...
Click to collapse
when turning it on hold volume down and power button at the same time. Then when the LG logo comes up let go and hold them down again and press the power key twice to get into the recovery or maybe it will boot up normally.
Hey thanks for the reply, i tried your trick it doesn't work then i followed the fix with ubuntu, after that no more black screen I'm now stuck on the LG logo all the time .
Help !!
If you can enter download mode, try flashing appropriate kdz file to your phone.
You can also try to install pdanet and check with that. Select the device and proceed. Once the drivers are installed .. Try flashing the stock... Lemme know of this works
Sent from my LG-D802 using XDA Premium 4 mobile app
vikramnote said:
You can also try to install pdanet and check with that. Select the device and proceed. Once the drivers are installed .. Try flashing the stock... Lemme know of this works
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, so i don't have download mode, fastboot mode and recovery mode gonna try pdanet now
moimoi39 said:
Hi guys!
After i've installed CWM for my LG F320 i got stucked on a blackscreen just after the LG logo, i have no recovery no download mode no fastboot and when i plug my phone on the computer i got nothing at all, is it over?
Click to expand...
Click to collapse
im having the same issue as you bro , if you get any solution so please let me know too , im very sad :crying:
moimoi39 said:
Hi, so i don't have download mode, fastboot mode and recovery mode gonna try pdanet now
Click to expand...
Click to collapse
Have to tried using dd commands on linux to install recovery img to partition? I was in the same situation a few days ago and the guide I linked below saved me!
Guide: http://forum.xda-developers.com/showthread.php?t=2582142
nievesaj said:
Have to tried using dd commands on linux to install recovery img to partition? I was in the same situation a few days ago and the guide I linked below saved me!
Guide: http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
I tried, now i don't have the black screen but the LG logo all time long.
moimoi39 said:
I tried, now i don't have the black screen but the LG logo all time long.
Click to expand...
Click to collapse
If you successfully transferred the correct recovery image using dd commands you should be able to boot into recovery. Have you tried booting into recovery after dd command? I did not even push the other files listed in guide, all I pushed was recovery image and it booted like a charm. Keep in mind I do own the VS980 variant, although it should be the same process just different image files.
So i did use the dd command on it, and transfered the openrecovery twrp for f320s but it just cannot boot on it with vol down and power
nievesaj said:
Have to tried using dd commands on linux to install recovery img to partition? I was in the same situation a few days ago and the guide I linked below saved me!
Guide: http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
that's for international version d802 , we are having korean models f320.. wont work with our device
pw1nce said:
that's for international version d802 , we are having korean models f320.. wont work with our device
Click to expand...
Click to collapse
Well than maybe he should try this guide:
http://forum.xda-developers.com/showthread.php?t=2432476
UPDATE: Nvm, you said you cannot enter download mode.
---------- Post added at 12:34 PM ---------- Previous post was at 12:30 PM ----------
moimoi39 said:
So i did use the dd command on it, and transfered the openrecovery twrp for f320s but it just cannot boot on it with vol down and power
Click to expand...
Click to collapse
Well to enter the recovery you supposed to hold down Vol+ & Power until LG logo appears, release both, and then immediately press&hold those two buttons again.
Can you get your device in adb mode?
nievesaj said:
Well than maybe he should try this guide:
http://forum.xda-developers.com/showthread.php?t=2432476
UPDATE: Nvm, you said you cannot enter download mode.
---------- Post added at 12:34 PM ---------- Previous post was at 12:30 PM ----------
Well to enter the recovery you supposed to hold down Vol+ & Power until LG logo appears, release both, and then immediately press&hold those two buttons again.
Can you get your device in adb mode?
Click to expand...
Click to collapse
Can't get into any mode and it's not recognized by the computer
PDANET is the key
Did u try using the pdanet? I was exactly in the same situation as u are. No matter if the lg drivers are installed.... The pc won't recognize the phone as ADB.EXE had stopped working. Here is what I did:
1) install pdanet.
2) it asked me to select the device and then it installed the drivers.
4) with this hopefully the ADB.EXE should start in your device manager. In my case it did.
5) go to google adb bundle folder.
6) go to SDK>platform tools> and paste your CM and gapps there.
7) try bridging the connection by going into the command prompt > and CD into the platform tools directory.
8) in the cmd put the command 'amd push "CM NAME" /sdcard/' and hit enter
9) this should push the file onto the phone... Do the same for gapps... And install it from the TWRP.
10) ALL THE BEST
Sent from my LG-D802 using XDA Premium 4 mobile app
vikramnote said:
Did u try using the pdanet? I was exactly in the same situation as u are. No matter if the lg drivers are installed.... The pc won't recognize the phone as ADB.EXE had stopped working. Here is what I did:
1) install pdanet.
2) it asked me to select the device and then it installed the drivers.
4) with this hopefully the ADB.EXE should start in your device manager. In my case it did.
5) go to google adb bundle folder.
6) go to SDK>platform tools> and paste your CM and gapps there.
7) try bridging the connection by going into the command prompt > and CD into the platform tools directory.
8) in the cmd put the command 'amd push "CM NAME" /sdcard/' and hit enter
9) this should push the file onto the phone... Do the same for gapps... And install it from the TWRP.
10) ALL THE BEST
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi ! thanks for the help but my device is still not recognized by the computer after i typed adb devices, i guess it's pretty over now, just gonna send it back to china and try to make the warranty work !
When I bricked mine at the LG logo, I got into download mode by
>Shut the phone off
>Hold volume up while plugging it in to the computer
>?????
>Profit!
Hope it helps
Tried that but can't access to the download mode
try this even if you had a bad flash the hard drive is split in three parts you only messed up one part so download mode should still be bootable. http://forum.xda-developers.com/showthread.php?t=2475045
Related
I wiped/formatted everything in TWRP. Now of course, there's no recovery or backups and when I do a factory reset, it boots and gets stuck with the LG logo.
HELP!
centro714 said:
I wiped/formatted everything in TWRP. Now of course, there's no recovery or backups and when I do a factory reset, it boots and gets stuck with the LG logo.
HELP!
Click to expand...
Click to collapse
can you get into download mode? (turn phone off, hold vol up, and plug phone into computer)
centro714 said:
I wiped/formatted everything in TWRP. Now of course, there's no recovery or backups and when I do a factory reset, it boots and gets stuck with the LG logo.
HELP!
Click to expand...
Click to collapse
Push a ROM via adb sideload and flash.
Support your Devs......
iOSh8er said:
Push a ROM via adb sideload and flash.
Support your Devs......
Click to expand...
Click to collapse
How do I do that exactly? Is there software on the computer side I have to install?
Install adb on your PC (Google on how to install if need be). Then push your file from PC to phone as instructed here http://teamw.in/ADBSideload
Support your Devs......
---------- Post added at 09:11 PM ---------- Previous post was at 09:07 PM ----------
Or do what @mazer4455 said & get into download mode to restore to stock. See instructions here http://forum.xda-developers.com/showthread.php?t=2432476
Support your Devs......
[QUOTE3]Or do what @mazer4455 said & get into download mode to restore to stock. See instructions here http://forum.xda-developers.com/show....php?t=2432476)[/QUOTE]
Doesn't look like the instructions include the LS980 Sprint version.
I'm trying to read up on installing ADB on my PC put a bit tougher than simply installing.
I've installed Android SDK onto my computer, running cmd from platform-tools, and did a "adb devices" and it cannot find my device.
any tips at this point?
centro714 said:
I've installed Android SDK onto my computer, running cmd from platform-tools, and did a "adb devices" and it cannot find my device.
any tips at this point?
Click to expand...
Click to collapse
wow, can't believe I found out!! turns out downloading the LG drivers DID NOT work but downloading PDA Net did!!
I was then able to sideload the rom and gapps file and now phone is back online! only took about 4 hours
centro714 said:
wow, can't believe I found out!! turns out downloading the LG drivers DID NOT work but downloading PDA Net did!!
I was then able to sideload the rom and gapps file and now phone is back online! only took about 4 hours
Click to expand...
Click to collapse
I did the same thing you did. Can you offer any help. I am extremely lost.
fisheric1 said:
I did the same thing you did. Can you offer any help. I am extremely lost.
Click to expand...
Click to collapse
I will get you some details instructions if you can wait till tomorrow.
Or, read this thread and YouTube how to do an adb side load. In short, you will need to download android sdk to your PC, download the rom zip file, plug your phone in and enter twrp's adb side load, open command prompt, and enter adb side load command.
Sent from my LG-G2 using xda app-developers app
centro714 said:
I will get you some details instructions if you can wait till tomorrow.
Or, read this thread and YouTube how to do an adb side load. In short, you will need to download android sdk to your PC, download the rom zip file, plug your phone in and enter twrp's adb side load, open command prompt, and enter adb side load command.
Sent from my LG-G2 using xda app-developers app
Click to expand...
Click to collapse
Thanks. That is what I figured I would have to do. ADB just isn't find the device though. I can boot into TWRP.
ADB Sideload instructions
fisheric1 said:
Thanks. That is what I figured I would have to do. ADB just isn't find the device though. I can boot into TWRP.
Click to expand...
Click to collapse
Ok, so here's what I did to install a ROM in TWRP when I wiped all the data using adroid SDK tools and TWRP ADB side load:
- Go here to download Android SDK https://developer.android.com/sdk/index.html (remember where you save/install it)
- Download your ROM and Gapps file (For Sprint, I think we only have Carbon ROM so use this link http://forum.xda-developers.com/showthread.php?t=2502789)
- Once you've downloaded the ROM and Gapps zip files, save the zip file into "your drive:\androidSDK\sdk\platform-tools" (this just makes it easier to find when doing the adb side load)
- Now plug your phone into your PC. Go into TWRP and start up ADB Side load. I think it's in Advanced button.
- Now open up the "your drive:\androidSDK\sdk\platform-tools" folder. In that folder, do a Shift-Right-Click and click "Open Command Window Here" to open cmd w/ that destination already mapped out.
- From here, all you have to do is type in "adb sideload [enter zip file name here]" and it should start installing over to your phone.
**** One important thing to note, if for some reason, in the command prompt your device is not visible, download PDA net for Android http://pdanet.co/ (this was actually my case and PDA net worked like a charm)
Hi
I have an international version 802 version with ROM of g.lewarne inside (rooted)
I've received and accepted the new OTA upgrade, and now i'm stick in the Clockworckmod Recovery.
I've flashed my LG back to the g.lewarne ROM but each time i restart my phone it goes directly to the CWM recovery Mode.
Any suggestion of what to do to get my phone starting normally?
Partager.info said:
Hi
I have an international version 802 version with ROM of g.lewarne inside (rooted)
I've received and accepted the new OTA upgrade, and now i'm stick in the Clockworckmod Recovery.
I've flashed my LG back to the g.lewarne ROM but each time i restart my phone it goes directly to the CWM recovery Mode.
Any suggestion of what to do to get my phone starting normally?
Click to expand...
Click to collapse
You have to flash back to stock...theres a thread in general forum....
RubbleTea said:
You have to flash back to stock...theres a thread in general forum....
Click to expand...
Click to collapse
I can't get into download mode using up volum and pluging in the usb.
Partager.info said:
I can't get into download mode using up volum and pluging in the usb.
Click to expand...
Click to collapse
Try holding vol up then plugging it again...
RubbleTea said:
Try holding vol up then plugging it again...
Click to expand...
Click to collapse
I'm trying but it keeps getting me back to the CWM recovery mode.
Partager.info said:
I'm trying but it keeps getting me back to the CWM recovery mode.
Click to expand...
Click to collapse
Oh forgot .....the phone has to be off...the hold vol up only then plug in USB chord try that...it shouldn't boot to recovery if it doesn't work
RubbleTea said:
Oh forgot .....the phone has to be off...the hold vol up only then plug in USB chord try that...it shouldn't boot to recovery if it doesn't work
Click to expand...
Click to collapse
Still the same problem.
Partager.info said:
Still the same problem.
Click to expand...
Click to collapse
Damn really?.....maybe check the thread for back to stock...they'll prob be more help or check around somebody around here o that thread has had the same problem as you.....hope this helps
RubbleTea said:
Damn really?.....maybe check the thread for back to stock...they'll prob be more help or check around somebody around here o that thread has had the same problem as you.....hope this helps
Click to expand...
Click to collapse
thank you anyway.
Now it keeps rebooting on lg logo with the error: secure booting error
Any idea?
Update:
A new situation here.
Once i plug my phone to the computer i get the lg logo with the famous error: secure booting error
then the phone screen goes black, however the phone is still on with black screen. on my compyter a new drive is detected with only one folder inside called image with many files inside:
- adsp.b00, adsp.b01, adsp.b02.......adsp.b12, adsp
- cmnlib.00, cmnlib.01, cmnlib.02, cmnlib.03, cmnlib
- dxhdcp2.b00.....until b03, dxhdcp2
- isdbtmm.b00.....until b03, isdbtmm
- mlserver.....
- modemb00....... untill modem.b26, modem
and other files.
PS: i've made a factory reset.
I don't know what can i do now to get my phone alive.
i have the same problem, i got an update yesterday for my german vodafone lg g2 und cant get out of my CWM, i dont know what to do, cant get into download mode
i tryed to transfer a rom.zip to my phone via adb , but my adb doesnt know the command sideload and push does nothing
http://forum.xda-developers.com/showthread.php?t=2569237
See if this help you... tip: use lg g2 flash tool to go back because you are not going to fix it ! Only by going back to stock.
Sent from my LG-LS980 using xda premium
Nicamarcel1 said:
http://forum.xda-developers.com/showthread.php?t=2569237
See if this help you... tip: use lg g2 flash tool to go back because you are not going to fix it ! Only by going back to stock.
Sent from my LG-LS980 using xda premium
Click to expand...
Click to collapse
It doesn't go to download mode.
What you need to do to fix this
If you´re stuck in CWM you CAN´T enter in download mode...in this case you have one Option.
download a T/zip file WRP Recovery
and
Plug the usb cable to a computer and enter in cwm recovery
next
adb push "name of recovery".zip /sdcard
next
install the new recovery
open a terminal commando and put this:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Reboot
If you´re stuck in TWRP you have 2 options.
Enter in download mode and restore the firmware from LGMobile or from ADB command to restore your boot.
sorry for bad english
the same here...
I now have the stable version of Cyanogen tested install.
Supposedly he is fertig.Als Note is only: Checking if loki - fying is needed, Updating partition details ...
Otherwise Zip Install Complete
After the wipe reboot and again in TWRP.
In the file manager of TWRP is not to be understood that an installation place hätte.Den Downloadmod tried (the button is held down the top of the lens and USB cable plugged in to it) always comes only the LG logo and then again TWRP.
This helped me
http://forum.xda-developers.com/showthread.php?t=2451696
ChaseRxx said:
What you need to do to fix this
If you´re stuck in CWM you CAN´T enter in download mode...in this case you have one Option.
download a T/zip file WRP Recovery
and
Plug the usb cable to a computer and enter in cwm recovery
next
adb push "name of recovery".zip /sdcard
next
install the new recovery
open a terminal commando and put this:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Reboot
If you´re stuck in TWRP you have 2 options.
Enter in download mode and restore the firmware from LGMobile or from ADB command to restore your boot.
Click to expand...
Click to collapse
I don't have access to download mode. Now i don't have either access to CWM recovery. All i get when i plug it to my PC is LG logo with the error: secure booting error.
Also adb does not detect my device.
Thank you for your answer.
It seems many people have encountered the same problem with the latest fota from LG.
then my phone goes to black screen while still on.
I have this problem ;(
I have only black screen, I can't go to twrp or download mode. I can't do nothing! :<
LG G2 802 after wipe in TWRP I mistakenly pressed the power of the phone and went out. I tried to turn it on but appeared only LG logo and the LED light flashes. thereafter poavljuje not anything. whether it can recover the phone and how? please help!
goran60 said:
LG G2 802 after wipe in TWRP I mistakenly pressed the power of the phone and went out. I tried to turn it on but appeared only LG logo and the LED light flashes. thereafter poavljuje not anything. whether it can recover the phone and how? please help!
Click to expand...
Click to collapse
can you boot to download mode?
boot back to twrp and run sideload in advanced options and connect to ur pc with cable and copy Rom of ur choice into an adb folder and open cmd within adb folder and push rom and it should take care of it.
Sent from my LG-D800 using xda app-developers app
lingarajug said:
boot back to twrp and run sideload in advanced options and connect to ur pc with cable and copy Rom of ur choice into an adb folder and open cmd within adb folder and push rom and it should take care of it.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
How to start phone? He stands on the logo and it is blocked. how to but twrp? i dont knov on LG comand to but
goran60 said:
How to start phone? He stands on the logo and it is blocked
Click to expand...
Click to collapse
??
lingarajug said:
boot back to twrp and run sideload in advanced options and connect to ur pc with cable and copy Rom of ur choice into an adb folder and open cmd within adb folder and push rom and it should take care of it.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
I am new to LG and I do not know commands to restart TWRP when not responding to nothing axis as you turn it on it says on the logo?How to ut to but tu twrp?
How to boot into recovery mode:
With phone off
Hold volume down & Power, when the LG logo appears release and press them again
happyantix said:
How to boot into recovery mode:
With phone off
Hold volume down & Power, when the LG logo appears release and press them again
Click to expand...
Click to collapse
Got a TWRP what is the next step?
PLEASE
lingarajug said:
boot back to twrp and run sideload in advanced options and connect to ur pc with cable and copy Rom of ur choice into an adb folder and open cmd within adb folder and push rom and it should take care of it.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
I managed to restore the phone back to life!!. THANK YOU FOR YOUR HELP
I hope you're such assistance will not need anymore.
THANK YOU AGAIN
Hi there, this is a big trouble.
My LG G2 (16GB, european format, I bought it in Italy) always work perfectly. I didn't mod anything til yesterday, just rooted and added superuser, and worked fine. I have the original stock firmware and original Android 4.4.0 Kit Kat.
Then yesterday I wanted to install the XCam, so before I install the TWRP recovery. Disaster: black, total black. From that moment, G2 doesn't work. And didn't go to recovery or download.
One of the last moves I did before the disaster: TWRP installing asked me the format of my mobile, "AT&T" or "international", and I chose the second one.
Anyway, after some attempts, I was succesful in restore a few modes. I followed this guide:
http://forum.xda-developers.com/showthread.php?t=2451696
With Ubuntu on the terminal of my friend, I followed the guide and now this is the current situation:
1) When I try to press power, it stucks at the logo
2) If I press power & vol -, appears the logo, then press these again and I go in sort of Hard Factory Reset, but it's not really true, cause I press 3 times power and I go in TWRP recovery
3) If i press vol + while I'm plugging mobile to PC, appears the "download mode" screen on mobile. But PC doesn't see it
(see the photos I attached)
Now my real problem is how to install and restore the original stock firmware. All this trouble happened not because of OTA or a mod, but just cause of installing a TWRP in bad way.
In the guide I linked above, it suggests to write some command strings in recovery but that doesn't work for me, I guess cause I don't have an OTA.
So I don't know how to insert a file to restore my firmware, because I don't have in my memory and, as you know, G2 doesn't have external memory.
I tried connecting a usb pen drive but doesn't see it in recovery.
I tried connecting in download mode to PC, using LG Flash Mobile and more, but doesn't work cause my PC seems unable to see the mobile.
I followed this guide hoping to modify the hosts file:
http://forum.xda-developers.com/showthread.php?p=44710061#post44710061
But didn't work. Also, I can't activate usb debug cause I can't enter in my mobile.
What can I do? Suggestions?
kiapsita said:
Hi there, this is a big trouble.
My LG G2 (16GB, european format, I bought it in Italy) always work perfectly. I didn't mod anything til yesterday, just rooted and added superuser, and worked fine. I have the original stock firmware and original Android 4.4.0 Kit Kat.
Then yesterday I wanted to install the XCam, so before I install the TWRP recovery. Disaster: black, total black. From that moment, G2 doesn't work. And didn't go to recovery or download.
One of the last moves I did before the disaster: TWRP installing asked me the format of my mobile, "AT&T" or "international", and I chose the second one.
Anyway, after some attempts, I was succesful in restore a few modes. I followed this guide:
http://forum.xda-developers.com/showthread.php?t=2451696
With Ubuntu on the terminal of my friend, I followed the guide and now this is the current situation:
1) When I try to press power, it stucks at the logo
2) If I press power & vol -, appears the logo, then press these again and I go in sort of Hard Factory Reset, but it's not really true, cause I press 3 times power and I go in TWRP recovery
3) If i press vol + while I'm plugging mobile to PC, appears the "download mode" screen on mobile. But PC doesn't see it
(see the photos I attached)
Now my real problem is how to install and restore the original stock firmware. All this trouble happened not because of OTA or a mod, but just cause of installing a TWRP in bad way.
In the guide I linked above, it suggests to write some command strings in recovery but that doesn't work for me, I guess cause I don't have an OTA.
So I don't know how to insert a file to restore my firmware, because I don't have in my memory and, as you know, G2 doesn't have external memory.
I tried connecting a usb pen drive but doesn't see it in recovery.
I tried connecting in download mode to PC, using LG Flash Mobile and more, but doesn't work cause my PC seems unable to see the mobile.
I followed this guide hoping to modify the hosts file:
http://forum.xda-developers.com/showthread.php?p=44710061#post44710061
But didn't work. Also, I can't activate usb debug cause I can't enter in my mobile.
What can I do? Suggestions?
Click to expand...
Click to collapse
Help, please
borrow or buy a mini usb otg stick, put the flashable stock rom on it (for your variant), connect it to the device, enter twrp, install the rom zip from usb otg...
see in twrp under "mount" if it shows you "usb/otg" (don't know which twrp version you have so i assume it's the older 2.7.x.x one)
you can also search the xda on how to sideload a rom zip from a computer to a bricked or formatted device (i personally have mini usb otg stick so i never used sideloading)
good luck
You haven't attached any images of the download mode.
Downloade mode is:
1. power off your lg g2
2. hold volume up AND connect g2 to pc
Now..if there is an actual download mode with arrows then it's ok. If you see the blue circles only then you have to fix it.
This would be the next step then...
btw LG flash tool
571
bender_007 said:
Now..if there is an actual download mode with arrows then it's ok. If you see the blue circles only then you have to fix it.
Click to expand...
Click to collapse
I'm afraid it's the second one... It's the same of this one:
kiapsita said:
I'm afraid it's the second one... It's the same of this one:
Click to expand...
Click to collapse
There is a way to fix it?
I already tried the tutorial with LG Flash Tool, but PC doesn't see my device
Install vmware and download slax. Install slax inside vmware. Connect it to PC and attach the qualcomm device. Then there is another tutorial for unbricking. Seek my posts inside
bender_007 said:
Install vmware and download slax. Install slax inside vmware. Connect it to PC and attach the qualcomm device. Then there is another tutorial for unbricking. Seek my posts inside
Click to expand...
Click to collapse
"Connect it to PC and attach the qualcolmm device"? What you mean? Just that I plug my device to PC?
kiapsita said:
"Connect it to PC and attach the qualcolmm device"? What you mean? Just that I plug my device to PC?
Click to expand...
Click to collapse
Which tutorial you mean?
http://forum.xda-developers.com/showthread.php?t=2582142
---------- Post added at 05:19 PM ---------- Previous post was at 05:18 PM ----------
Use vmware and slax. Flash aboot, boot, laf. No other files.
sea mniteen
bender_007 said:
http://forum.xda-developers.com/showthread.php?t=2582142
---------- Post added at 05:19 PM ---------- Previous post was at 05:18 PM ----------
Use vmware and slax. Flash aboot, boot, laf. No other files.
Click to expand...
Click to collapse
I don't have Ubuntu, are you sure I can do that with Windows PC - and with no damage?
I already follow this tutorial (the first link in my first post). Now my computer can't see the device. Are you sure I can do this procedure anyway?
bender_007 said:
Use vmware and slax. Flash aboot, boot, laf. No other files.
Click to expand...
Click to collapse
And where do I get aboot, boot and laf?
Help! I need to restore download mode -now is in blue circles!
From your kdz, use kdz extractor.
bender_007 said:
From your kdz, use kdz extractor.
Click to expand...
Click to collapse
I'm sincerely worried to damage my PC with VmWare and Slax. Can't I use Ubuntu?
You can use ubuntu. Neither of these will damage your pc
Should I also overwrite the openrecovery file with an updated TWRP recovery, in order to support USB OTG ?
Can't find kdz extractor, anyway
I have the same problem and i have try all the aboves the only way to unbrick it i think is only via adb because i have adb acces
sorry for my english, thanks advance.
refresh! same problem any help? : d
I'm stuck in TWRP with no OS or roms to flash. I tried to mount my USB but for some reason it is not working. When I click to mount the USB, the box stays unchecked.
What should I do?
michaelearth said:
I'm stuck in TWRP with no OS or roms to flash. I tried to mount my USB but for some reason it is not working. When I click to mount the USB, the box stays unchecked.
What should I do?
Click to expand...
Click to collapse
Install other Drivers for your Computer or Flash a Kdz
Krenol said:
Install other Drivers for your Computer or Flash a Kdz
Click to expand...
Click to collapse
What is a kdz?
I installed the LG G2 drivers and I ca only get my device to show up when I run the command "adb devices" when I reboot into bootloader but my phone just hangs on the LG logo. When I try to push a rom.zip I get the error message "permission denied."
michaelearth said:
What is a kdz?
Click to expand...
Click to collapse
I ended up doing the same thing accidentally a few months back...
1) install LG flash tool and drivers on your computer.
2) Download KDZ for your phone/provider/country.
3) Restart phone in Download Mode.
4) Flash KDZ to phone. Phone will be completely clean like from the factory.
All the info and instructions are here on the forum.
---------- Post added at 02:18 PM ---------- Previous post was at 02:14 PM ----------
michaelearth said:
I installed the LG G2 drivers and I ca only get my device to show up when I run the command "adb devices" when I reboot into bootloader but my phone just hangs on the LG logo. When I try to push a rom.zip I get the error message "permission denied."
Click to expand...
Click to collapse
A rom.zip won't work as you have no baseband to work with. You need to flash a clean factory rom (KDZ file) and start over again.
Kiwi_Dude said:
I ended up doing the same thing accidentally a few months back...
1) install LG flash tool and drivers on your computer.
2) Download KDZ for your phone/provider/country.
3) Restart phone in Download Mode.
4) Flash KDZ to phone. Phone will be completely clean like from the factory.
All the info and instructions are here on the forum.
Click to expand...
Click to collapse
Thank you so much!! I just flashed the kdz and booted up into stock 4.4.2. Problem solved