Database Users

[Q] Verizon G2 Stuck in Bootloop

Hey Everyone, just got my G2 today and already have a problem. So naturally the first thing I did was root it, and after a few hours researching the nuances of doing that on a VZW model I got that to work. Next I went and downloaded Titanium and moved my backup files onto the phone, and restored my apps no problem. Then I went to restore my system info (just call logs, sms/mms, bluetooth pairings) and rebooted the phone only to get stuck in a bootloop (the VZW animation would just play over and over.) So I powered off the phone thinking something just went wrong with the reboot. When I went to turn it back on I started to get worried...
No matter what key combo I pressed I could not get the phone to power on. I decided to plug it in and thankfully it did come back on, but once again went into the bootloop. So I did some researching and tried every way to reflash the stock VZW firmware, but nothing has worked. I tried the KDZ method mentioned here, but I cannot get the B2CAppSetup.exe program to install (looks like LG has moved or revoked access to csmg.lgmobile.com:9002). So I moved to this post, but I cannot get the LG Flash Tool to start the flashing (when as instructed I unplug the phone and restart it in download mode again and plug it back in the Flash Tool just says "Waiting for Connection" and doesn't do anything.)
At this point I am out of ideas. I have a feeling that since I cannot even power the phone on unless its connected to USB/Power Adapter something is seriously wrong, but I have no idea what Titanium could have restored to cause this.
Any ideas or suggestions would be greatly appreciated.

Did the same thing myself and nearly crapped myself. Here's how I got out of it:
Power down the phone (hold down power button)
Turn on phone by holding power & volume down buttons
When the LG screen comes up, let go of the buttons and then hold them down again
You should then get options to factory reset.
I will say this, I was never able to restore SMS or call logs from Titanium. Doing a few factory resets just made me stop caring.

Thanks for the reply, however no matter what key combo I press I cannot get the phone to power on unless it is plugged into USB/Power Adapter so I cannot get into the stock recovery app.
Any other ideas guys?

TRDeal195 said:
Thanks for the reply, however no matter what key combo I press I cannot get the phone to power on unless it is plugged into USB/Power Adapter so I cannot get into the stock recovery app.
Any other ideas guys?
Click to expand...
Click to collapse
This happened to me while flashing as well.
You have to keep trying, the timing of exactly when to release the buttons and press them again is very precise, meaning you don't have much time at all.
It took me several tries to get it back to recovery.
I also only released just the power button, not both,
Good Luck!

drice72 said:
This happened to me while flashing as well.
You have to keep trying, the timing of exactly when to release the buttons and press them again is very precise, meaning you don't have much time at all.
It took me several tries to get it back to recovery.
I also only released just the power button, not both,
Good Luck!
Click to expand...
Click to collapse
Where you able to power your phone up by just pressing the power button (without it connected to anything)? That's what keeps throwing me off about this whole thing, without connecting it to something no matter what button(s) I press the phone simply will not do anything.

When you plug in the device via USB and hold the vol+key you should get the same prompt for a factory reset...

Cyko.Tech67 said:
When you plug in the device via USB and hold the vol+key you should get the same prompt for a factory reset...
Click to expand...
Click to collapse
When I do this the only thing that happens is a small message comes up saying "Download Mode" and then the phone immediately goes to the firmware update screen....

TRDeal195 said:
When I do this the only thing that happens is a small message comes up saying "Download Mode" and then the phone immediately goes to the firmware update screen....
Click to expand...
Click to collapse
were you running a custom rom?
or stock LG

Cyko.Tech67 said:
were you running a custom rom?
or stock LG
Click to expand...
Click to collapse
Stock VS98011A_01 rooted via IORoot.

TRDeal195 said:
Stock VS98011A_01 rooted via IORoot.
Click to expand...
Click to collapse
Here is my suggestion to you... try and push twrp recovery to your phone, theres a change you adb bridge might still be working, then id try flashing a rom once done with that... i can get you a link for the method on pushing twrp using the iOroot folder... will edit this in a min. once i find it
________________________________________________________________
Heres that link : http://forum.xda-developers.com/showthread.php?t=2449670
________________________________________________________________
if your having any troubles pushing twrp let me know

Cyko.Tech67 said:
Here is my suggestion to you... try and push twrp recovery to your phone, theres a change you adb bridge might still be working, then id try flashing a rom once done with that... i can get you a link for the method on pushing twrp using the iOroot folder... will edit this in a min. once i find it
________________________________________________________________
Heres that link : http://forum.xda-developers.com/showthread.php?t=2449670
________________________________________________________________
if your having any troubles pushing twrp let me know
Click to expand...
Click to collapse
Thanks for the suggestion! I'll give this a shot now and let you know how I make out.

TRDeal195 said:
Thanks for the suggestion! I'll give this a shot now and let you know how I make out.
Click to expand...
Click to collapse
please do!

So I tried TWRP but ADB could not see the phone. As a last resort I tried the TOT restore method on the computer that I used to root it initially and it actually went through. Once 10B was restored it finally booted back up and OTA'd 11A and I was able to re-root it after that.
Lesson learned, next time I will not try to recover the phone using a difference laptop then I rooted it on.
Thanks for the help and suggestions guys!

TRDeal195 said:
So I tried TWRP but ADB could not see the phone. As a last resort I tried the TOT restore method on the computer that I used to root it initially and it actually went through. Once 10B was restored it finally booted back up and OTA'd 11A and I was able to re-root it after that.
Lesson learned, next time I will not try to recover the phone using a difference laptop then I rooted it on.
Thanks for the help and suggestions guys!
Click to expand...
Click to collapse
Happy to hear you got it fixed! Now that you have got it working agian, your adb bridge should be working! so i would save that link in case of wanting to rom in the future! Hope i helped you!

OTA Bootloop Help

I have a Verizon LG G2 I tried to flash my backed up stock recovery with Flashify so I could flash the most recent OTA. After accepting the OTA update my phone restarted, tried to install the update, hung at a black screen but was still turned on. If I power it off and back on it shows the LG logo, some white text, then goes to the same black screen. What appears to be happening is that my backup recovery did not restore properly and it's hanging when it tries to go into recovery. It's almost like my recovery partition is blank.
I've tried to follow the instructions to flash back to stock, but I do not believe I'm actually able to get my phone into download mode. When it is plugged into my windows 7 computer with the LG drivers installed it shows up in device manager as QHSUSB_BULK.
Is there any way for me to push a stock recovery, or even a custom recovery to my phone so I can somehow salvage it, or am I permanently bricked?

toopty said:
I have a Verizon LG G2 I tried to flash my backed up stock recovery with Flashify so I could flash the most recent OTA. After accepting the OTA update my phone restarted, tried to install the update, hung at a black screen but was still turned on. If I power it off and back on it shows the LG logo, some white text, then goes to the same black screen. What appears to be happening is that my backup recovery did not restore properly and it's hanging when it tries to go into recovery. It's almost like my recovery partition is blank.
I've tried to follow the instructions to flash back to stock, but I do not believe I'm actually able to get my phone into download mode. When it is plugged into my windows 7 computer with the LG drivers installed it shows up in device manager as QHSUSB_BULK.
Is there any way for me to push a stock recovery, or even a custom recovery to my phone so I can somehow salvage it, or am I permanently bricked?
Click to expand...
Click to collapse
I have the same exact problem. exactly the same. mine doesnt even show up for download mode. this sucks!

cgillie92 said:
I have the same exact problem. exactly the same. mine doesnt even show up for download mode. this sucks!
Click to expand...
Click to collapse
I'm still trying to find a solution I will post here if i have any luck. I've dug through a lot of forum posts and I think what makes us unique is the fact that we have a corrupt or blank recovery partition.

toopty said:
I'm still trying to find a solution I will post here if i have any luck. I've dug through a lot of forum posts and I think what makes us unique is the fact that we have a corrupt or blank recovery partition.
Click to expand...
Click to collapse
Ive looked through a lot too. and its crazy how that would happen i made sure it was rebooting correctly before i took the ota and then when i did the ota bam! only screens i can get to come up are the hardware key control mode and the factory hard reset which both go to white screens after I do them both. every one else probably has not taken the ota.

cgillie92 said:
Ive looked through a lot too. and its crazy how that would happen i made sure it was rebooting correctly before i took the ota and then when i did the ota bam! only screens i can get to come up are the hardware key control mode and the factory hard reset which both go to white screens after I do them both. every one else probably has not taken the ota.
Click to expand...
Click to collapse
One difference in what mine is doing and what your phone is doing. I go to a solid black screen not a white screen. It's very hard to tell my phone is even turned on. I'm having to look if the back-light to verify if it's on or not. I can hold my power button for 10 seconds through one LG logo cycle and then it turns off.

toopty said:
One difference in what mine is doing and what your phone is doing. I go to a solid black screen not a white screen. It's very hard to tell my phone is even turned on. I'm having to look if the back-light to verify if it's on or not. I can hold my power button for 10 seconds through one LG logo cycle and then it turns off.
Click to expand...
Click to collapse
I hope someone helps us out. I really cant afford a new one because the warranty is void. I was going back to stock because of all of the little bugs that need to be ironed out in roms. cause kit kat is around the corner hopefully and my problem virtually is the same i might have had my brightness on auto or something prior to that.

Foolow this tutorial to get your phone back.
http://forum.xda-developers.com/showthread.php?p=48765620

Partager.info said:
Foolow this tutorial to get your phone back.
http://forum.xda-developers.com/showthread.php?p=48765620
Click to expand...
Click to collapse
Thanks for the link. I'm tryingto follow the instructions,but when I get to the step where i plug in my phone it just showes up as a bunch of failes partitions, and slows my ubuntu to a crawl. I'm a linux noob, is there a command i can run to stop this from happening? I also created a reply asking this question in the link you sent me.
Thanks for the help.

Partager.info said:
Foolow this tutorial to get your phone back.
http://forum.xda-developers.com/showthread.php?p=48765620
Click to expand...
Click to collapse
After following the instructions on the above link i was able to get fastboot status on my phone. It did not fully restore my phone however. I was able to flash twrp via fastboot. I was then able to boot into twrp and run the command at this link via twrp terminal http://forum.xda-developers.com/showthread.php?t=2451696
Thanks to everyone for all your help.

toopty said:
Thanks for the link. I'm tryingto follow the instructions,but when I get to the step where i plug in my phone it just showes up as a bunch of failes partitions, and slows my ubuntu to a crawl. I'm a linux noob, is there a command i can run to stop this from happening? I also created a reply asking this question in the link you sent me.
Thanks for the help.
Click to expand...
Click to collapse
How did you get past the ubuntu slowing down? I cant win for ubuntu freezing due to all of the failed partitions either so close but yet so far =/

cgillie92 said:
How did you get past the ubuntu slowing down? I cant win for ubuntu freezing due to all of the failed partitions either so close but yet so far =/
Click to expand...
Click to collapse
Ignore all the message, unplug you phone get ready to type the command, plug it in and immediately press enter to run the command. it took some trial and error, and i had to use this other post to help me out. I actually got fastboot working first, then used this post to http://forum.xda-developers.com/showthread.php?t=2477595 to get download mode working, and to flash twrp recovery. After that i used this post to run the command line from with twrp. http://forum.xda-developers.com/showthread.php?t=2451696 . I didn't have to flash the factory tot to my phone, but i have that option now because download mode is working. This process will work, there is hope for you getting your phone back. I'm fully recovered. I decided 12B is not worth it in the mean time, but if you want 12B you need to flash the factory tot and then upgrade. There is a way to root 12B, but as of this time you are unable to get Custom Recovery on it.

lg mobile support tool stuck at 49%

i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.

LG G2 Stuck @ 49%
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00

try with x86
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
i had exact same issue that progress stucked on 49%. if you are using 64bit OS, try to flash it with 32bit(x86) OS
good luck

tinydynamite00 said:
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00
Click to expand...
Click to collapse
still no luck

El Killer said:
still no luck
Click to expand...
Click to collapse
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00

tinydynamite00 said:
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00
Click to expand...
Click to collapse
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots

El Killer said:
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots
Click to expand...
Click to collapse
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!

Please READ CAREFULLY
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
Esteef said:
Okay, after 12+ hours of trying every method possible on XDA I finally resolved my issue. I will update the first post just incase any others care or fall into the same dilemma I was in.
The LG Mobile Support tool would not download the firmware and it would NOT ask me for my IMEI to download it either.
So my solution....
***
Installed LG Mobile Support Tool then Installed the LG Drivers. (FROM HERE http://forum.xda-developers.com/showthread.php?t=2471370
BEFORE I connected the phone to the computer. I opened the LG Mobile support tool clicked (Options on the top right).
When the dropped down opened, I clicked the (Upgrade Recovery) option. THEN, is when the prompt opened to ask me what my IMEI is.
Before I entered my IMEI, I connected my phone to the computer in download mode, then proceeded to enter my IMEI and hit OK.
This is when the LG Mobile Support tool SUCCESSFULLY downloaded the latest official LG firmware and installed it.
*** BE AWARE, with the phone connected to the PC, the prompt NEVER appeared to enter my IMEI.
*** But with the phone disconnected, the prompt came up every time. This might be the trick for some people.
*** with the IMEI prompt opened, I then connected the phone , entered the IMEI, then hit OK. BOOM HERPES....
Well I'll polish this up more later. I hope this works for every LG G2 Variant and not just the T-Mobile one (D801)
-Esteef
Click to expand...
Click to collapse
THIS WILL WIPE YOUR PHONE COMPLETELY...

tinydynamite00 said:
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!
Click to expand...
Click to collapse
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens

El Killer said:
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens
Click to expand...
Click to collapse
Sounds good. A full charge can make all the difference. I learnt the hard way! One or more of us will be along should you need further help.
I do hope you get this sorted! I've come back from the brink too many times to not believe you won't.
tinydynamite00

Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app

Falaco147 said:
Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
im trying but i get a battery to low error. i guess i need to charge it longer

i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support

El Killer said:
i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support
Click to expand...
Click to collapse
You are welcome... The first time I did it too my battery was at 28% and I panicked since I got the low battery error.
I could of sworn that my phone officially became a paper weight. My heart dropped.
I'm glad you are up and running with the rest of us!
-Esteef

1732359994
hey !
I have the same problem, but... I can't acces to the recovery :/ i tried to install CWM (with Freegee) over Team win recovery and... boot loop :
The rom 4.2.2 flex was gone, no boot animation
-When i pres volum down + power, i have the reset menu, but after that, there is a black screen and it's written at the top left "started usb_start Fastboot Mode ()"
Please, i need your help, i'm so afraid !!
Thx !

Esteef said:
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
THIS WILL WIPE YOUR PHONE COMPLETELY...
Click to expand...
Click to collapse
I know this thread is a bit old, but it saved my butt. Your method worked perfectly. Thank you for this post.

My LG F460 was bricked (error 570), only download mode was working. Esteef method works fine even my pictures and programs was saved. Thanks!

Secure booting Error!

Hello, about a weekago I've installed dorimanx kernel for my D802 and today I realized that it made my 3g connection unstable
I decided to flash back to the stock kernel which I backed up before flashing dorimanx, but something went wrong. I really don't know what.
The phone won't turn on, it keeps showing LG logo and showing Secure booting error. Cause: boot certification verify. (1001)
I tried pretty much everything in the past 6 hours and i'm losing my mind.
LG PC suite or any LG pc software won't recognize the phone when plugged with USB, and everytime I plug in the phone to my PC windows opens 15 boxes of "new hard drive detected, format needed to use" (here's a picture)
Also tried following this post: http://forum.xda-developers.com/showthread.php?t=2582142, but no luck. It seems like my dev folder is missing alot of sub-folders for some reason.
Anyway I'm really lost. Can you guys please help me to solve this? I would really appreciate it.
Thanks.

To be sure, have you already tried to get into TWRP through the factory reset key combination?

I tried almost every combination possible. the phone simply resets itself to the same situation, screen is on but black and nothing else happens
After holding power+down buttons the LG logo comes up and disappears in a snap, like something is wrong.

Nightbeat said:
I tried almost every combination possible. the phone simply resets itself to the same situation, screen is on but black and nothing else happens
After holding power+down buttons the LG logo comes up and disappears in a snap, like something is wrong.
Click to expand...
Click to collapse
Your device is unplugged while you do this right? It has to be completely turned off before doing the combination, and while plugged in, it just doesn't turn off completely.

Yes, it is unplugged while I do it

You'll need to hold the volume down + power key as you turn the phone on, then re-press them when the LG logo shows up to get to the factory reset page. Just verifying the simplest solution before I go in depth with this.
If your phone still won't get into TWRP, try this: plug the phone in to your computer, and open device manager (right click computer > manage) and under portable devices, locate your phone. Once you find it, right click it, click uninstall, and once that's done, unplug your G2 and reboot the PC. Once it boots up, plug your G2 back in and let it reinstall the drivers and try to do the guide again. Best of luck!
EDIT: I just realized the guide you are looking at requires Ubuntu. Are you aware of this?
double edit: http://forum.xda-developers.com/showthread.php?t=2432476
Let me know if you've tried this guide yet.

I believe you're using vistual machine for ubuntu.
Well, if you keep getting 15 messages about formating drives (in windows) when you plug your phone to ubuntu you will not get your patitions in ubuntu.
So you should close the messages asking you to format drives, then open vmware in full screen mode, then plug your phone to computer and follow the guide http://forum.xda-developers.com/showthread.php?t=2582142. I'm sure in this case you will get your phone partitions showing is dev/sdb.
Even if you don't get those partitions keep trying several times untill you succeed.
Good luck.

Thank you!
Apparently I was using the key combination wrong.
And yes I was using ubuntu on a VM.

Nightbeat said:
Thank you!
Apparently I was using the key combination wrong.
And yes I was using ubuntu on a VM.
Click to expand...
Click to collapse
Had a feeling! Glad you fixed it!

Help, My LG G2 is a mess!

HI
So i was trying to restore my LG G2 D803 phone and I accidentally unplugged it when I was doing the LG Tools process, I turned off my phone so I can reset it but now it doesn't work anymore. So now my phone can't use Firmware Update, and every time I tried to escape it, by hold the power button or anything, it goes back to Firmware Update where its now at 0%. What do I do now?
EDIT: I think the problem i'm facing right now. Is that it keeps going into a glitch download mode when I turn my phone on, and I can't access download mode properly or factory reset, due to going back to the glitched download mode. I tried to flash it properly, letting it drain battery on itself, and turning it off FULLY & turning it back on, where all these methods would just lead back to the glitched download mode.

JustinY050 said:
HI
So i was trying to restore my LG G2 D803 phone and I accidentally unplugged it when I was doing the LG Tools process, I turned off my phone so I can reset it but now it doesn't work anymore. So now my phone can't use Firmware Update, and every time I tried to escape it, by hold the power button or anything, it goes back to Firmware Update where its now at 0%. What do I do now?
Click to expand...
Click to collapse
You can try flashing a kdz for your model in download mode with lg 2014 flash tool. See links below, there might be YouTube tutorials, not sure.
https://lg-firmwares.com/lg-d803-firmwares/
https://forum.xda-developers.com/showthread.php?t=2797190

crophs said:
You can try flashing a kdz for your model in download mode with lg 2014 flash tool. See links below, there might be YouTube tutorials, not sure.
https://lg-firmwares.com/lg-d803-firmwares/
https://forum.xda-developers.com/showthread.php?t=2797190
Click to expand...
Click to collapse
Yea I tried using the Flash tool Way but it doesn't work, I think the problem is that the LG is stuck in download mode so I can't do any Flash tool stuff or anything, and I can't restart my phone because it would just go back.

JustinY050 said:
Yea I tried using the Flash tool Way but it doesn't work, I think the problem is that the LG is stuck in download mode so I can't do any Flash tool stuff or anything, and I can't restart my phone because it would just go back.
Click to expand...
Click to collapse
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.

crophs said:
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
Click to expand...
Click to collapse
It didn't show any progress on the phone, and also said an error on not working. And there would be no change in the download screen, like it would say that nothing is downloading from the USB port it is in and etc.
But I try to wait for 25 mins and see.

crophs said:
Can you elaborate more when you say it doesn't work?
After you hit flash on the software, don't do anything for like 25mins. It may show you error messages on computer, that it failed or whatever, pop up windows, don't click on anything just let it stay like that. The progress bar can also be stuck on the phone, not a problem. Give it that 25 mins.
Click to expand...
Click to collapse
Nope it didn't work. I did it for at least 30 mins and nothing happened, still the same screen on both on my phone and computer.

Can you post a video ?

crophs said:
Can you post a video ?
Click to expand...
Click to collapse
Of the 25 mins or my problem?
I cant do it for now, but I think the problem is that my phone is in a loop of download mode, i mean that everytime I turn off my phone and turn it back on, it goes back to download mode without me pressing the buttons.

JustinY050 said:
Of the 25 mins or my problem?
I cant do it for now, but I think the problem is that my phone is in a loop of download mode, i mean that everytime I turn off my phone and turn it back on, it goes back to download mode without me pressing the buttons.
Click to expand...
Click to collapse
You must turn it off completely before booting in download mode. Keep pressing and holding volume down+power for a minute, it should completely turn off after one or two LG logo. If it doesn't then you can unplug battery. After that you don't boot with power button, then you boot with download mode method.
Video from complete shutdown - putting USB in computer while pressing volume up button and starting download mode - software recognizing your device - checking all the correct options in software - hitting flash button - state of phone after flash started.

crophs said:
You must turn it off completely before booting in download mode. Keep pressing and holding volume down+power for a minute, it should completely turn off after one or two LG logo. If it doesn't then you can unplug battery. After that you don't boot with power button, then you boot with download mode method.
Video from complete shutdown - putting USB in computer while pressing volume up button and starting download mode - software recognizing your device - checking all the correct options in software - hitting flash button - state of phone after flash started.
Click to expand...
Click to collapse
No, like it automatically goes to download mode wihtout me pressing the buttons, and if i do it the normal button pressing way with the power and volume up, then idk if its the glitch version. But the problem im trying to solve is fixing it so it stops going automatically to the glitched download mode when i turn it on

JustinY050 said:
No, like it automatically goes to download mode wihtout me pressing the buttons, and if i do it the normal button pressing way with the power and volume up, then idk if its the glitch version. But the problem im trying to solve is fixing it so it stops going automatically to the glitched download mode when i turn it on
Click to expand...
Click to collapse
unlpug battery, see youtube how to put it in download properly and flash

crophs said:
unlpug battery, see youtube how to put it in download properly and flash
Click to expand...
Click to collapse
Like take the battery out?

JustinY050 said:
Like take the battery out?
Click to expand...
Click to collapse
Whatever that means to you. Not sure how old you're, but try not to be a thick skull with someone trying help you for free, bye

crophs said:
Whatever that means to you. Not sure how old you're, but try not to be a thick skull with someone trying help you for free, bye
Click to expand...
Click to collapse
K firstly, Im not trying to be rude or anything, I just need help fixing my phone. If I somehow offended you in any reason why, im sorry. And I literally don't know much about phones, but I was trying to make sense on your instructions and making sure Im not going to mess it up. If you dont want to help anymore, its fine, im grateful that you tried to help
Also I know how to flash it properly and put it in download mode properly, its just that its always going to a glitched download mode so I can't download anything, or put it in factory mode.

JustinY050 said:
K firstly, Im not trying to be rude or anything, I just need help fixing my phone. If I somehow offended you in any reason why, im sorry. And I literally don't know much about phones, but I was trying to make sense on your instructions and making sure Im not going to mess it up. If you dont want to help anymore, its fine, im grateful that you tried to help
Also I know how to flash it properly and put it in download mode properly, its just that its always going to a glitched download mode so I can't download anything, or put it in factory mode.
Click to expand...
Click to collapse
No you shouldn't, rather I am sorry, made a bad judgement call. I left room for confusion in my post. Should've said unplug and plug back the battery. Perhaps you thought if i meant to leave it unplugged.
As your main problem was to stop it from bootlooping into a glitched download, it can be done with holding power and volume down for a minute or two.
But since that didn't work for you i suspected button/hardware failure and so recommended to reconnect the battery.
Another way can be, to let it be as is, so that the battery drains itself and after that charging it with a wall adapter. And see if it stops booting into download itself, or displays a charging only screen.
Anyhow, I hope you find a way out. Feel free to ask anything again.

crophs said:
No you shouldn't, rather I am sorry, made a bad judgement call. I left room for confusion in my post. Should've said unplug and plug back the battery. Perhaps you thought if i meant to leave it unplugged.
As your main problem was to stop it from bootlooping into a glitched download, it can be done with holding power and volume down for a minute or two.
But since that didn't work for you i suspected button/hardware failure and so recommended to reconnect the battery.
Another way can be, to let it be as is, so that the battery drains itself and after that charging it with a wall adapter. And see if it stops booting into download itself, or displays a charging only screen.
Anyhow, I hope you find a way out. Feel free to ask anything again.
Click to expand...
Click to collapse
Nah its ok, that happens to me too sometimes.
So I was going to try to unplug my battery and reconnect it but then but before I was, i was testing some other stuff with the button commands stuff (I mean like the download mode with pressing power and volume up adn stuff) and I think i was able to get the actualy download mode, not the glitched one. I was able to download a bit for the flash tool so what i'm testing rn is to see if I can do the full factory reset and see if that fixes it.
PS: I was already doing the flashtool before so its fine if I erase my data

JustinY050 said:
Nah its ok, that happens to me too sometimes.
So I was going to try to unplug my battery and reconnect it but then but before I was, i was testing some other stuff with the button commands stuff (I mean like the download mode with pressing power and volume up adn stuff) and I think i was able to get the actualy download mode, not the glitched one. I was able to download a bit for the flash tool so what i'm testing rn is to see if I can do the full factory reset and see if that fixes it.
PS: I was already doing the flashtool before so its fine if I erase my data
Click to expand...
Click to collapse
K it looks like it worked but now it crashes when it loads the LG logo

JustinY050 said:
K it looks like it worked but now it crashes when it loads the LG logo
Click to expand...
Click to collapse
Sounds like a bootloop, i once fixed it by using another usb port and usb cable. Sometimes they get disconnected for bad connection and cause this kinda error. If MD5 is available, please match yours with original after downloading files. You can keep flashing, maybe try a different kdz later. There is also a TOT method which i never tried myself. This phone is almost impossible to brick permanently.
Some good threads -
https://forum.xda-developers.com/showthread.php?t=2475045
https://forum.xda-developers.com/showthread.php?t=2687768
This is the easiest
https://m.youtube.com/watch?v=cOxlaIPW2ew
https://www.google.com/amp/s/amp.re...he_lg_g2_is_unbrickable_a_story_of_death_and/

crophs said:
Sounds like a bootloop, i once fixed it by using another usb port and usb cable. Sometimes they get disconnected for bad connection and cause this kinda error. If MD5 is available, please match yours with original after downloading files. You can keep flashing, maybe try a different kdz later. There is also a TOT method which i never tried myself. This phone is almost impossible to brick permanently.
Some good threads -
https://forum.xda-developers.com/showthread.php?t=2475045
https://forum.xda-developers.com/showthread.php?t=2687768
This is the easiest
https://m.youtube.com/watch?v=cOxlaIPW2ew
https://www.google.com/amp/s/amp.re...he_lg_g2_is_unbrickable_a_story_of_death_and/
Click to expand...
Click to collapse
Sorry for the late reply, just been busy flashing my phone. So I been trying to re flashing my phone using the TOT method because the kda method isn't working, but either 1) it keeps crashing when its downloading 2) cannot recognize the phone to my computer when my phone is in download mode but says its not connected to my computer. Before, it did kinda work, it kept crashing but it lasted a bit longer sometimes, but I had to reflash it because the software update was glitched where it says its on the notification bar but wasnt there. So for rn, i'm still trying to reflash it.

I donno much about the TOT method, haven't tried myself. Getting a hunch that there might be hardware issues somewhere which is interrupting the process and not letting it finish, could be the cable, pc usb outlet, phone's micro usb port....perhaps a loose connection or something else.
If i were you i would stick to the kdz, as it's working somewhat better for you and they all serve same purpose in the end. That youtube video is actually a good step by step tutorial.