I recently brought a Samsung gt i19505, Baseband XXUEMJ7, kernel 3.4.0-1765174
All is working fine, but every time i try to enter recovery mode, it shows little blue letters on top left of the screen just for 2 secs, then the phone
reboots. same happens when i try to enter the download mode, show everything (press volume up for enter, press volume down for cancle etc)
same happens, the screen appears only for 2 secs, wont let me choose anything, so i cant flash my device, cant root my device, cant do anything anyone knows how to fix this??? please help...
zenithfdo said:
I recently brought a Samsung gt i19505, Baseband XXUEMJ7, kernel 3.4.0-1765174
All is working fine, but every time i try to enter recovery mode, it shows little blue letters on top left of the screen just for 2 secs, then the phone
reboots. same happens when i try to enter the download mode, show everything (press volume up for enter, press volume down for cancle etc)
same happens, the screen appears only for 2 secs, wont let me choose anything, so i cant flash my device, cant root my device, cant do anything anyone knows how to fix this??? please help...
Click to expand...
Click to collapse
to access the Samsung download mode you can use a USB dongle JIG:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i can't understand what is wrong whit your phone, but this USB tool is a must have in your case.
Hold the buttons down for longer for recovery.
Use ADB:
http://www.teamandroid.com/2013/11/19/samsung-galaxy-s4-enter-recovery-mode/
Related
can anyone help me? i flush my hd2 and after that, it stuck-up, and does not continue to boot.i cant change the rom because it is not detected by the computer. thanks in advance
go to bootloader mode (hold volume down while power up)
connect usb cable, (wait till it writes "USB" at the bottom)
download stock rom from htc.com
flash the rom.
nxt time read the tutorials before flashing other roms.
make sure battery is over 50% be4 flashing
its not working..it just stuck in "htc" in the start up boot. and doesnt continue. i try hard reset, still the same thing happen.and the screen is always on with the "htc" in the screen.,..
gozt3 said:
its not working..it just stuck in "htc" in the start up boot. and doesnt continue. i try hard reset, still the same thing happen.and the screen is always on with the "htc" in the screen.,..
Click to expand...
Click to collapse
Change radio.
YOU HAVE TO GO TO BOOTLOADER MODE !!
you dont listen, its the screen where there is 3 colors red green and blue..
to get there:
1)take battery out,
2)put it back in.
3)then you must power up your phone while you HOLD VOLUME DOWN button.
HERES A VIDEO:
http://www.youtube.com/watch?v=6ZNMRCyk1yA
go to minute 1:10,
look how he holds the volume and press the power button.
when you see the screen with red, green and blue colors -> connect usb and wait it to recognize.
heres how the screen should look:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you see theres the "USB" word at the bottom.
after that flash the stock rom.
theres something wrong with the buttons, but its done.thanks eeeeee!
gozt3 said:
theres something wrong with the buttons, but its done.thanks eeeeee!
Click to expand...
Click to collapse
np, explain the problem with the buttons.
Hello,
I was trying to flash the Skrilax Bootloader with the backthund3r flashing utility and something goes wrong.
Now I have a black screen on my tablet, led on the flashing is stuck halfway.
I hope somebody could help me.
Here is what I have done exactly :
Plug the tablet.
Run blackthund3r A500APXFlash.exe
Enter SBK
Choose V8-Thor_1.7.3_recovery.a500apx
Choose the automatic method.
Click enter APX Mode --> black screen on the tablet / let on.
I have had a warning about a bad Acer driver, so I had to reinstal the driver using the link that was provided by the software.
AT THIS STEP I HAD TO UNPLUG THE TABLET TO INSTALL THE SOFTWARE...I DID IT WITHOUT QUITING A500APXFlash
Once the drivers are installed I clicked "Try again" to got to the APX Mode.
I thought it was ok but because I had the black screen on my tablet but in fact the device was not connected "No APX mode detected", I guess I didnt focused on that...
What next is that I click next anyway and didnt cancel the flash.
Had the message box for the bootloader check, I clicked 'No' because the tablet didnt load into the bootloader.
Now backthund3r is stuck halfway and the tablet is not responding (blackscreen, led on).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At this step I really don't know what to do...
Is there someting I shout do to continue the flashing process ?
OR shoud I stop I try to hard reset my tablet ?
TIA for your help...
Well.. I just hard reset my tablet and it's working again.
[Q&A] Can not install the "ROMS". Black screen after logo of note 3. HELP ME!
Hi All, Hope you can help me with this problem:
I am trying to install custom roms on my Galaxy note 3 (SM-N900)
Start the recovery, installed the ROM as it normally is. But then when I restart the phone, only the logo of "Galaxy Note 3" appears and then the screen turns off, the keys do not work, seems to go on, and nothing more there, shows the logo of Samsung, no sign of to change.
The only solution to get out of that state is reset to the original firmware (I have the factory, the 4.4.2) via odin.
Start the recovery, installed the ROM as it normally is. But then when I restart the phone, only the logo of "Galaxy Note 3" appears and then the screen turns off, the keys do not work, seems to go on, and nothing more there, shows the logo of Samsung, no sign of to change.
The only solution to get out of that state is reset to the original firmware (I have the factory, the 4.4.2) via odin. But I could not install any rom for "SM-M900" and really did not know what to do.
I ask you please to help me as soon as possible, I try several roms. Sorry for my English, but I hope I are understood. I attached pictures of the information from the "Download" mode and the information on the phone. Please, I'm desperate.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you very much for your attention.
The weird in this pics is "BASEBAND: Unknown".
1. Dial *#1234# and attach a screenshot.
2. Reboot in "Stock Recovery" and attach here what appears.
Hi all,
My Wife's tablet seem to be stuck in somesort of system update loop.
I can't seem to put it into recovery mode using
HOME + Volume up + POWER
I can put the tablet in DOWNLOAD mode using HOME + Volume down + POWER, but my PC does not seem to detect the tablet
Using OdinV3 3,14 with the Samsung USB drivers installed.
Is the tablet a lost cause or can i try something else to fix it?
Here is a screenshot what i see on the screen for a brief moment before it reboots.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you for your time!
=========== EDIT1:
So i was able to hook the tab to the PC using another cable i had lying arround, and i wanted to flash TWRP:
But reading the manual, it instruct me to enable OEM unluck in developer options. But this is something i cannot do because the device won't boot
https://forum.xda-developers.com/ga...overy-official-twrp-gtaxlwifi-galaxy-t3437666
What should i do?
=========================================
====Edit2
So I found me some firmware for my device from sammobile, I hope I can use Odin to flash this on the tablet
https://www.sammobile.com/samsung/galaxy-tab-a-2016/firmware/SM-T580/PHN/
=====
======EDIT3
So the flash process was stuck in hthe initialization phase for to long and I decided to unplug the device and try again. Now don't ask me why but this time the device automatically booted up in recovery mode and I was able to factory reset the device. It now boots up fine... Can someone explain what is going on? All seems fine now.
Kind regards,
Maniak
I have a Lenovo Ideatab A3000F tablet that worked perfectly until a few weeks ago when I wanted to turn on it and it stayed on the logo.
If I press the power button it turns on and stays on the logo. If I want to turn it off by holding down the power button for a few seconds it turns off, but after a while it turns itself back on, in loop.
To turn it off completely I have to press the reset button that is in the back, under the lid.
By pressing power + vol+ I can normally choose between Recovery/Fastboot/Normal mode but none of them works. When starting it in Recovery mode it is also stays on the logo, and that's the biggest problem...
If I put it to charge it turns on and it is also stays on the logo, the battery icon doesn't even appear.
What I did was download the stock firmware and the flashing tool. I installed the drivers on my pc and the tablet was perfectly recognized, but when I start flashing the rom it stays at 0% when the tablet is with the screen on, and gives me an error when I try it with the tablet turned off.
It is as if there is no connection between the PC and the tablet, but they recognize each other.
Here is a vid of the problem (in Spanish) -> https://drive.google.com/file/d/1RcG_eU-laYpLKYAbJHaSdyt8aMfsBL2A/view?usp=drivesdk and there are two screenshots attached; one screenshot of when it remains at 0% with the screen on, and another that gives me an error when it is off.
Is there any other alternative or maybe something I'm doing wrong?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}