boot problem - HD2 Windows Mobile 6.5 ROM Development

can anyone help me? i flush my hd2 and after that, it stuck-up, and does not continue to boot.i cant change the rom because it is not detected by the computer. thanks in advance

go to bootloader mode (hold volume down while power up)
connect usb cable, (wait till it writes "USB" at the bottom)
download stock rom from htc.com
flash the rom.
nxt time read the tutorials before flashing other roms.
make sure battery is over 50% be4 flashing

its not working..it just stuck in "htc" in the start up boot. and doesnt continue. i try hard reset, still the same thing happen.and the screen is always on with the "htc" in the screen.,..

gozt3 said:
its not working..it just stuck in "htc" in the start up boot. and doesnt continue. i try hard reset, still the same thing happen.and the screen is always on with the "htc" in the screen.,..
Click to expand...
Click to collapse
Change radio.

YOU HAVE TO GO TO BOOTLOADER MODE !!
you dont listen, its the screen where there is 3 colors red green and blue..
to get there:
1)take battery out,
2)put it back in.
3)then you must power up your phone while you HOLD VOLUME DOWN button.
HERES A VIDEO:
http://www.youtube.com/watch?v=6ZNMRCyk1yA
go to minute 1:10,
look how he holds the volume and press the power button.
when you see the screen with red, green and blue colors -> connect usb and wait it to recognize.
heres how the screen should look:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you see theres the "USB" word at the bottom.
after that flash the stock rom.

theres something wrong with the buttons, but its done.thanks eeeeee!

gozt3 said:
theres something wrong with the buttons, but its done.thanks eeeeee!
Click to expand...
Click to collapse
np, explain the problem with the buttons.

Related

Problems on hard reset sequence

Hard reset sequence: Press VoiceDial button + comms manager button + soft reset. You will get a screen with 3 colored bars; at this screen, press the D-Pad UP. (some other version will display a message saying to restore to factory default settings, press the 'Send' button. In this case, press your 'Send'/'Call' button).
seriously, please tell me.. where is the Dial Pad?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the up-down-left-right thing at the bottom.
This screen appears and im stuck on it...
and nothing happens please Help!
This screen appears and im stuck on it...
and nothing happens please Help!
Cant help you. My Wizard will show me the other message (rather than the 3 colour screen) and to hardreset, I just press the green-phone/send button.
Thanks Hanmin
hanmin said:
Cant help you. My Wizard will show me the other message (rather than the 3 colour screen) and to hardreset, I just press the green-phone/send button.
Click to expand...
Click to collapse
THanks a lot for your time. i already hard reset my phone! i just keep pushing all the buttons available. except QWERTY pad.. and u know what.. i found the right combination. no colors appear just black screen and a msg. states that if im ready to format my phone! thank you thank you! well/.. i have to find how to connect my fone in my new laptop. seems like my laptop is looking for a driver for the phone.
might post new thread instead.
you might want to find out how you did your hardreset and post it to the wiki so it may help others with the same problem.

[Q] no active sync and no bootloader

hello my friends
i'm got a bricked htc hd2 which had android running on it but in some how the system is gone and there is no way to get into bootload i just get a screen as bellow and i can also get to the three colore screen
i cant flash anything cuz i cant go to bootloader or active sync
i just get this black screen or the three
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
colore http://dl.xda-developers.com/attach...128e02488/52048d03/2/1/7/5/9/6/4/DSC_0013.jpg
what can i do please ??
feherneoh said:
Sorry for giving suggestions those may tell you that I consider you a noob, but in most of the cases developers can be noobs, too. So these are the simplest suggestions I got for you:
Hold volume down and press reset
hold power button and press reset
First should open tricolor bootloader, second should open MAGLDR menu
Click to expand...
Click to collapse
THANK YOU MY FRIEND
I know how to get into magldr menu but the menu is empty !!!
its shown in the picture there is nothing there
p.s : i did what you said and its empty too !
please help if you can
feherneoh said:
maybe dead nand chip (bad blocks in SPL/MAGLDR)
can you post some kind of video of it? it would help understanding where the problem is.
Click to expand...
Click to collapse
there is no use of video
my problem is :::
when i turn on the phone the magdlr screen shows with no options in it as the picture in the previous post
so i just want a way to flash magdlr please
MY REGARDS
rashad543 said:
there is no use of video
my problem is :::
when i turn on the phone the magdlr screen shows with no options in it as the picture in the previous post
so i just want a way to flash magdlr please
MY REGARDS
Click to expand...
Click to collapse
What do you mean by "no bootloader"? What happens when you turn on your device WHILE holding the volume down rocker?

[Q] Need HELP!!!

I recently brought a Samsung gt i19505, Baseband XXUEMJ7, kernel 3.4.0-1765174
All is working fine, but every time i try to enter recovery mode, it shows little blue letters on top left of the screen just for 2 secs, then the phone
reboots. same happens when i try to enter the download mode, show everything (press volume up for enter, press volume down for cancle etc)
same happens, the screen appears only for 2 secs, wont let me choose anything, so i cant flash my device, cant root my device, cant do anything anyone knows how to fix this??? please help...
zenithfdo said:
I recently brought a Samsung gt i19505, Baseband XXUEMJ7, kernel 3.4.0-1765174
All is working fine, but every time i try to enter recovery mode, it shows little blue letters on top left of the screen just for 2 secs, then the phone
reboots. same happens when i try to enter the download mode, show everything (press volume up for enter, press volume down for cancle etc)
same happens, the screen appears only for 2 secs, wont let me choose anything, so i cant flash my device, cant root my device, cant do anything anyone knows how to fix this??? please help...
Click to expand...
Click to collapse
to access the Samsung download mode you can use a USB dongle JIG:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i can't understand what is wrong whit your phone, but this USB tool is a must have in your case.
Hold the buttons down for longer for recovery.
Use ADB:
http://www.teamandroid.com/2013/11/19/samsung-galaxy-s4-enter-recovery-mode/

S7 Active Black dot at the corner of the screen

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 3811611
After finished the intial setting of phone, a black dot appears at the corner of the screen. It hasn't been there yet before the setting.
Although it does't affect any funtion in the phone, it makes me feel bad to have an black dot at the screen.
If I don't want to reset the phone again, what else could I do to remove the black dot?
that is VERY bizarre. i would factory reset (sigh, i know), either that or put a sticker over it...
tkp206093 said:
View attachment 3811610
View attachment 3811611
After finished the intial setting of phone, a black dot appears at the corner of the screen. It hasn't been there yet before the setting.
Although it does't affect any funtion in the phone, it makes me feel bad to have an black dot at the screen.
If I don't want to reset the phone again, what else could I do to remove the black dot?
Click to expand...
Click to collapse
Go into Download Mode. The entire screen other than the text should be BLUE. If the dot still persists, it's hardware.
How to go into Download Mode:
1. Power off the device.
2. Hold Volume Down+Home+Power until a screen comes up with lots of dialogue.
3. Let go of the Volume Down+Home+Power keys.
4. Press Volume Up.
You should then be in Download Mode. Again, if the dot persists, it's hardware.
To get out of Download Mode just hold the same buttons you used to get into it for about 10 seconds - but once you see the screen go black just let go quickly and it should boot up. If you end up getting the Download Mode prompt again, just press Volume Down to resume booting regularly.

Lenovo Ideatab A3000F Soft Brick, not booting - Can't entry to Recovery mode/Can't flash stock firmware

I have a Lenovo Ideatab A3000F tablet that worked perfectly until a few weeks ago when I wanted to turn on it and it stayed on the logo.
If I press the power button it turns on and stays on the logo. If I want to turn it off by holding down the power button for a few seconds it turns off, but after a while it turns itself back on, in loop.
To turn it off completely I have to press the reset button that is in the back, under the lid.
By pressing power + vol+ I can normally choose between Recovery/Fastboot/Normal mode but none of them works. When starting it in Recovery mode it is also stays on the logo, and that's the biggest problem...
If I put it to charge it turns on and it is also stays on the logo, the battery icon doesn't even appear.
What I did was download the stock firmware and the flashing tool. I installed the drivers on my pc and the tablet was perfectly recognized, but when I start flashing the rom it stays at 0% when the tablet is with the screen on, and gives me an error when I try it with the tablet turned off.
It is as if there is no connection between the PC and the tablet, but they recognize each other.
Here is a vid of the problem (in Spanish) -> https://drive.google.com/file/d/1RcG_eU-laYpLKYAbJHaSdyt8aMfsBL2A/view?usp=drivesdk and there are two screenshots attached; one screenshot of when it remains at 0% with the screen on, and another that gives me an error when it is off.
Is there any other alternative or maybe something I'm doing wrong?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Categories

Resources