Hello Everyone,
I have a problem I need figuring out.. I recently wanted to update my Lg optimus lp705g from ice cream sandwich to jelly bean, I tried to FLASH the update with KZW (cant remember the exact program name, but it made me choose the firmware, emergency and some other stuff like that) after that, my phone went into emergency mode like the instructions said it would, and in rebooted, however, no update was in place. I procceded to check my settings for a new software update. there was one available so I downloaded it and after that my phone went into reboot, however. When I rebooted it showed the LG icon, but did not boot, it showed a ''secure booting error, cause boot certification verify'' , knowing that this means I have to flash my firmware again using the same program, I tried to get into emergency mode but I CANT!! someone please help me!! does this mean my phone is useless? is there anything I can do? any button configuration in order to get into emergency mode??? all help will be appreciated, im desperate
jkurona12 said:
Hello Everyone,
I have a problem I need figuring out.. I recently wanted to update my Lg optimus lp705g from ice cream sandwich to jelly bean, I tried to FLASH the update with KZW (cant remember the exact program name, but it made me choose the firmware, emergency and some other stuff like that) after that, my phone went into emergency mode like the instructions said it would, and in rebooted, however, no update was in place. I procceded to check my settings for a new software update. there was one available so I downloaded it and after that my phone went into reboot, however. When I rebooted it showed the LG icon, but did not boot, it showed a ''secure booting error, cause boot certification verify'' , knowing that this means I have to flash my firmware again using the same program, I tried to get into emergency mode but I CANT!! someone please help me!! does this mean my phone is useless? is there anything I can do? any button configuration in order to get into emergency mode??? all help will be appreciated, im desperate
Click to expand...
Click to collapse
have you tried hard reset?
Try hard reset. Try also to enter emergency mode with battery removed
Sent from my HTC Desire S using xda app-developers app
Related
i have lg gt540 and while updating to 2.1 with kdz tool the pc crashed now i cant turn on the phone...i hope some one help me with that
Have you tried updating again?
the problem the the phone dont open when i press power button there is nothing
what about when plugged into pc?
first thx for replying but there is nothing when i connect it to pc i think it needs abootloader.i hope u answer me
im afraid im pretty new to android ( gt540 is my first smartphone ) but anytime i updated, everything went ok, in fact yours is the first time i heard of a crash while updating so i cant give you much info but your in the right place, im sure the devs can figure something for you. just try remove the battery and then plug into your pc. and its not a problem replying just wish i could help.
well, did you try with the battery removed?
yes i did nd there is nothing
plz any one help in that
plz some one tell me how to make abootloader to it i have another lg gt540 i want to know if i can use it to repair the bootloader for this dead phone
The problem is theres noway u can acces inside the phone memory to patch bootloader. Go to lg waranty and tell them this happened when u were updating phone, dont tell them that pc crashed, tell them u updatet through lgsupport tool too, not through kdz updater they should fix it for u.
Sent from my GT540
thx for replying i will call them tomoorow i hope they will fix it for me... i want to ask if some one has passed with the same problem b4
Goto Emergency Mode, and upgrade from KDZ program. In KDZ program, you must setting Phone Mode to CS_Emergency. And flash agan.
i sent them email about the problem and this was the reply
Thank you for your email regarding this issue.
Unfortunately due to the nature of this issue, you will no longer be able to finish the update service. In this case you would be required to return to ourselves for servicing. To action this please contact the number below with your reciept and handset to hand.
If you have any further queries, please do not hesitate to contact us again.
Best regards,
LG Electronics UK Helpdesk
can any one tell me what should i do
Remove battery press volume - or + I can't remember try two options, then plug in usb.
You should see blue screen with DOWNLOAD or EMERGENCY MODE text.
i tried all keys combination nothing work
my mobile internet went dead after flashing quarx rom (I did it wrong btw...), but everything else worked fine.
I couldn't get mobile internet back on track no matter what (it was disabled in quick settings when I flashed quarx), I even tried factory reset and flashing the baltic rom. during the flashing, the kdz updater gave me an error close to the end, and my phone became stuck at the android screen.
even though I have CWR installed, so I could flash it again, I sent it to LG claiming I was updating through their website and since my phone doesn't start. I didn't tell them anything about the mobile internet not working. Hopefully they'll clean the phone completely and that will fix it.
I'll be picking up my phone after work today, I'll let you know how it went.
Same thing Happened to me n almost **** my pants for killing my brand new phone..
follow these steps
1. volume +or-(i dont remember) +camera n power on. it should turn on n say downloading mode.
2. update( you can use kdz updater, it probably wont crash this time but even if gets stuck just w8 for it)
3. after updating, remove the usb cable n turn on the phone, hopefully it would work
4. ENJOY ( N THINK TWICE BEFORE EFFING WITH THE PHONE, )
i am not sure about the keys for emergency/downloading mode(i think it was vol-) GOOGLE IT IF KEYS DONT WORK.
Put to microwave on 2 sec without battery and send do service
my service provider fixed my phone in 3 days without any issues, they flashed the t-mobile branded 2.1 on it. went home and now I have the open europe with fastboot and cwr.
so if all else fails, just send it to LG or your provider.
cheers!
Aw man I need some serious help here! So yesterday I was following instructions on the android forum to get my phone to 2.3.7 and so I downloaded this fastboot ROM and flashed it to my GT540 but I later found out you needed to have a rooted phone in order to get into fastboot and everything in the OS from android forum kept crashing my apps (couldn't get Z4Root), so I decided to try to flash it to 2.1 with the LG Update Tool and it got stuck at 4 percent. I unplugged it and now my phone was stuck at the Vodafone logo. I used KDZ Updater to flash FranceOrangeV20C_Fastboot to it and it didnt work (some parameter error showed up). Now my phone is stuck on the LG logo and it isn't detected by anything! PLLEASE HELP! I bricked my phone!!!!
this happened to me before dont know about you but i would send it to lg.
Figured it out!
OK so in KDZ Updater change the phone mode to CS Emergency and go into Download Mode in the phone and then just flash
This is if you get errorcode: WParam:100 LParam:4008
mine was in a worst condition the phone will not boot in anyway
As your phone turn on there is always a way to save it
Don't worry, we all been there
Follow instructions properly anz don't be smart are solutions to avoid bricking.......now i agree send it to lg if still under warranty.
Sent from my LG GT540 using xda premium
go into download mode
connect it to ur pc
go into device manager and turn off android modem
use kdz updater english version and change type to 3GQCT-Smartphone(WM)
chose ur rom and run
That's what i did when my phone stuck at LG logo and the only thing i could do is go into download mode ^^
Hope it help
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
It's bootloop. When I had L5 I had the same problem after flashing bricked phone via KDZ.
Do hard reset with key combination. It worked for me. Phone will boot up few minutes.
LeoFalto said:
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
Click to expand...
Click to collapse
I was forced to do a hard reset...that sucks but it had to be done.
Thank you.
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
aeoros said:
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
Click to expand...
Click to collapse
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
nastase.alex said:
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
Click to expand...
Click to collapse
nop, it's like the device is dead,
Have you tried it:
Hold together volumn (-) + home button, then turn the power on
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
so there is no solution to this brick???
aeoros said:
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
Click to expand...
Click to collapse
Quote:
Originally Posted by breakercris
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice
Did you try emergency mode? (volume up + volume down + power button)
If not, see if you can enter it and then flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher).
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
gugutm1 said:
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
Click to expand...
Click to collapse
Install LG PC Suite, the LG Mobile Support Tool and the LG L7 USB driver. Then try again. Make sure your phone is set on 3GQCT and EMERGENCY on KDZ.
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
F4uzan said:
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
Click to expand...
Click to collapse
hi there im stuck in lg logo i had 4.4.2 but i had some problems with my gps so i decided to go back on v20d i used kdz emergency 3gqct battery out phone in emergency mode and im stuck in lg logo please can someone help me and sorry if my english is bad im from croatia.
Hi there,
I installed the LG software update app, and when I plugged in my phone it did some checking and said that there was an update available.
So I clicked OK, waited for ages for the kdz package to download, and then it started the update.
Problem is, it gets to 14% on the phone screen (20% on my computer) and then it hangs for a while. Eventually the PC app says "upgrade stopped due to an error". Now my phone is constantly stuck on the Firmware Upgrade screen, even when I restart it, and I can't even ADB onto it, or use Linux to view it (as mentioned in a different post).
I can't get into download mode or recovery mode... just this Firmware Upgrade screen.
Any ideas what I can do? I stupidly thought that - as it was an official upgrade - it wouldn't screw up my phone... how stupid do I feel ???
Anything I can try? My phone is an LG G2 International (D802) version.
Thanks a lot,
JM
@MOD, sorry - I realised my OP was in the wrong place, so moved it here
jasonnm said:
Hi there,
I installed the LG software update app, and when I plugged in my phone it did some checking and said that there was an update available.
So I clicked OK, waited for ages for the kdz package to download, and then it started the update.
Problem is, it gets to 14% on the phone screen (20% on my computer) and then it hangs for a while. Eventually the PC app says "upgrade stopped due to an error". Now my phone is constantly stuck on the Firmware Upgrade screen, even when I restart it, and I can't even ADB onto it, or use Linux to view it (as mentioned in a different post).
I can't get into download mode or recovery mode... just this Firmware Upgrade screen.
Any ideas what I can do? I stupidly thought that - as it was an official upgrade - it wouldn't screw up my phone... how stupid do I feel ???
Anything I can try? My phone is an LG G2 International (D802) version.
Thanks a lot,
JM
@MOD, sorry - I realised my OP was in the wrong place, so moved it here
Click to expand...
Click to collapse
What about fastboot did u tried it ?
azher98 said:
What about fastboot did u tried it ?
Click to expand...
Click to collapse
Hi there,
Nope - can't get into any other mode than this "Update" mode... gonna try a few tools. Was trying to salvage my stuff, but it's not the end of the world to wipe it.
Thanks,
J
[RESOLVED]
Problem solved! Try the .TOT method shown here:
http://forum.xda-developers.com/showthread.php?t=2432476
The .KDZ method didn't work for me, from this post or any other. The .TOT method worked first time!