Database Users

[Q] weird bootloop

I flashed the recovery for SM 9005 (new kernel) with Odin 3,09 (Chose AP, this = PDA, right?). While flashing it started bootlooping, and for just a few seconds it showed the lockscreen then bootlooped again.
I have root and recovery, but everytime i start the phone it bootloops a couple of times before it fully starts the phone. Basically the phone works just fine, it just struggles to boot.
EDIT: Crap, I tried to install Xposed Framework, but KNOX seemed to block it, rebooted, now its just bootlooping, somtimes it briefly shows the logon screen, but never fully boots.
EDIT 2: Flashed a remove Xposed.zip, it stil bootloops (A LOT) ,but eventually it starts up properly?
EDIT 3: Tried to wipe cache and dalvik, no luck. Tried to reflash recovery, both including the regular kernel, and the old kernel, no luck.
This is the Odin log:
<ID:0/006> Added!!
<ID:1/007> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:1/007> Odin v.3 engine (ID:7)..
<ID:0/006> File analysis..
<ID:1/007> File analysis..
<ID:1/007> SetupConnection..
<ID:0/006> SetupConnection..
<ID:1/007> Initialzation..
<ID:1/007> Get PIT for mapping..
<ID:1/007> Firmware update start..
<ID:1/007> SingleDownload.
<ID:1/007> recovery.img
<ID:1/007> NAND Write Start!!
<ID:1/007> RQT_CLOSE !!
<ID:1/007> RES OK !!
<ID:1/007> Remain Port .... 1
<OSM> All threads completed. (succeed 1 / failed 1)
<ID:0/006> Added!!
As you can see I got suceed 1/failed 1, any tips? Would a data wipe fix the bootlooping?

midnightzen said:
I flashed the recovery for SM 9005 (new kernel) with Odin 3,09 (Chose AP, this = PDA, right?). While flashing it started bootlooping, and for just a few seconds it showed the lockscreen then bootlooped again.
I have root and recovery, but everytime i start the phone it bootloops a couple of times before it fully starts the phone. Basically the phone works just fine, it just struggles to boot.
EDIT: Crap, I tried to install Xposed Framework, but KNOX seemed to block it, rebooted, now its just bootlooping, somtimes it briefly shows the logon screen, but never fully boots.
EDIT 2: Flashed a remove Xposed.zip, it stil bootloops (A LOT) ,but eventually it starts up properly?
EDIT 3: Tried to wipe cache and dalvik, no luck. Tried to reflash recovery, both including the regular kernel, and the old kernel, no luck.
This is the Odin log:
<ID:0/006> Added!!
<ID:1/007> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:1/007> Odin v.3 engine (ID:7)..
<ID:0/006> File analysis..
<ID:1/007> File analysis..
<ID:1/007> SetupConnection..
<ID:0/006> SetupConnection..
<ID:1/007> Initialzation..
<ID:1/007> Get PIT for mapping..
<ID:1/007> Firmware update start..
<ID:1/007> SingleDownload.
<ID:1/007> recovery.img
<ID:1/007> NAND Write Start!!
<ID:1/007> RQT_CLOSE !!
<ID:1/007> RES OK !!
<ID:1/007> Remain Port .... 1
<OSM> All threads completed. (succeed 1 / failed 1)
<ID:0/006> Added!!
As you can see I got suceed 1/failed 1, any tips? Would a data wipe fix the bootlooping?
Click to expand...
Click to collapse
Don't add more wood into the fire.
Flash stock and try again.

nicholaschum said:
Don't add more wood into the fire.
Flash stock and try again.
Click to expand...
Click to collapse
now its worse its on a bootloop and when i try to reboot into recovery it doesnt. i think my phone is bricked fck

Check md5 and flash again stock. Maybe dl last one NF4 or NG1

[HELP]Galaxy note 3 stuck on boot logo

hi i am using note 3 N9005 model with official poland lollipop 5.0 update for over a month but today suddenly my phone got some lag and tried restarted but fail as it kept stuck on samsung boot logo forever...i tried removing battery and waiting but still there was no good... then when i tried booting in recovery ( TWRP which i flashed while rooting) the same thing happened and mobile kept stuck on samsung logo and at top left it was written -
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I have a good experience in flashing , odin and all this recovery stuff but i have never seen mobile not even getting into recovery...as last resort i thought of flashing the official rom image from odin .. but when i tried it showed me FAIL message in red box where connected shows...and in log it said -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am very much in need of some serious help as i use this mobile as my daily driver..any help will be appreciated!!:good:

some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.

dancapitan said:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
Click to expand...
Click to collapse
thanks for help but that also doesnt work...same error again in odin..

[Q] Help rooting Note 4 N910F

Hi,
Hope someone can help me. I'm having problems rooting my Note 4 N910F. Initially I tried CF's autoroot but my phone went into a loop with the message "CF Auto Root, Set Warranty bit : recovery" message appearing in the top left. I could not get it out of this, so then tried to install TWRP recovery. This seemed to be successful as the phone rebooted and i was able to use my phone again. See Odin log :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
However when I tried to get into TWRP it simply boots into the stock android recovery. When i try to do a OTA update now I get the message " The operating system on your device has been modified...."
Thanks
Paul

Ok Think I've worked this out for myself. Think with CF autoroot I needed a special file that was posted by a Tony on here for my version of the N910F. Tried the TWRP again with Odin and did not do an automatic reboot this time. Pulled the battery and booted into recovery and have TWRP. Seems my phone was automatically replacing TWRP with stock recovery.
Hope this helps somebody else out!

Galaxy S4 9505 odin problem.

Hello i have a problem with flashing anything with odin on my Samsung Galaxy S4 9505.
Whenever i try flashing ROM or recovery or whatever, it says this:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also when i try to boot my phone normally or go to the recovery it says this:
"Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again."
I've downloaded Kies and tried to recover it but it says:
'GT-I9505' does not support initializing.
What i've tried so far:
flashing pit file with and without the rom.Tried multiple odin versions.Tried multiple rom versions.Tried flashing recovery CWM and TWRP.
Also the error i got "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again." was after i tried flashing official rom 4.4.2 downloaded form Sammobile(first i installed TWRP recovery wiped system data dalvic cache and booted in download mode ). I was previously using latest Android 5.0.1 official.
Is there any hope of unbricking my device?

Have you tried reinstalling your ADB driver?
Honestly, kies sucks. You don't need kies to have ADB driver installed. There is a package that install samsung drivers seperately.

Once you upgraded to a lollipop bootloader you can't just simply go back to a kitkat one. Samsung doesn't allow that.
Try using the back USB ports on your PC. Trust me, it can do wonders.
You could also try Heimdall.

well i think i've advanced abit now i get this:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
tried to reinstall the ADB driver and using the back ports.
Also is there any way to flash Official Samsung ROM true a custom recovery?Cuz i just managet to install TWRP recovery on it.

hollydamn i just tried flashing true odin Android 5.0.1 and it worked.But the wifi isn't working it just not letting me turn it on.

Why don't people understand when I say YOU CANNOT DOWNGRADE ?

i didn't downgrade it now i've installed 5.0.1.

simeon112 said:
i didn't downgrade it now i've installed 5.0.1.
Click to expand...
Click to collapse
Yes, but you tried to, even after I explicitly said you can't.
Your WiFi issues might be related to modem/kernel.
You could try flashing a different firmware.

I tied a differed one the wifi works now.Only when i turn on the mobile data and try to go to a random site it says Forbidden.I think i need to wait my carrier to send me the setting for the net...
Anyway THANK YOU very much!! <3

I have an i337m (North American version of s4) and you can downgrade from stock 5.01 to stock 4.4.2. I did this on 3 phones in order to use regionlockaway to sim unlock all three phones. Everything worked, including data and wifi.
I'd like to try a downgrade with a i9505 for curiosity sake but that particular model is not sold by carriers in Canada.

Help got stuck on download mode and i think lcd is broken,

Tried to flash latest gtaxlwifi for my 8.1 Oreo Galaxy Tab A 10.1 SM-T580,
after Odin finished, i encountered a problem. The device didn't respond to the power button, so i can go to the recovery for the first time.
After many tries, i managed to get it back to download mode. After that, i tried to go the recovery and my screen showed some red bars, like the lcd is all messed up.
Putting it back to download mode, the screen works fine.
What should i do, please help me.

The LCD isn't bad if download screen is good. May have some how flashed wrong firmware

TheMadScientist said:
The LCD isn't bad if download screen is good. May have some how flashed wrong firmware
Click to expand...
Click to collapse
I didn't flash a firmware i tried to flash a custom recovery.

oXydead said:
I didn't flash a firmware i tried to flash a custom recovery.
Click to expand...
Click to collapse
Well restore your stock firmware properly per your model and location and it should be good you probably flashed the wrong one or something for your current firmware

TheMadScientist said:
Well restore your stock firmware properly per your model and location and it should be good you probably flashed the wrong one or something for your current firmware
Click to expand...
Click to collapse
Tried but it fails.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 2473 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
on tablet
SW REV. CHECK FAIL (BOOTLOADER) DEVICE 4 BINARY 3

It does the same thing to me running android 7 Galaxy Tab A6 10.1 SM-T580. I tried installing different versions of twrp with different versions of odin. Does the same thing to me. some red lines, blue lines. Although if you shut down & then boot, it works normally.. but i guess no root for us!!

oXydead said:
Tried but it fails.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 2473 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
on tablet
SW REV. CHECK FAIL (BOOTLOADER) DEVICE 4 BINARY 3
Click to expand...
Click to collapse
thats the bootloader telling you your flashing older firmware than whats on the device hence trying to downgrade which isnt possible obviously with that error download a newer firmware with a bit 4 because your device is bit 4 nd your flashing bit 3

Managed to flash an older twrp. Tablet saved.
But when i tried to install a wifi version (that's the correct for me), it said error 7 u have the LTE version (not true) and you try to install a wifi version.
A tweak with Notepad++ did the job.

oXydead - I have the same issue - which old verison of TWRP worked for you?
Not to worry - found your comments in "[Recovery][T580] Official TWRP for Galaxy Tab A 10.1 WiFi 2016 (gtaxlwifi) by jcadduono"
Thanks

you can fix it:
https://forum.xda-developers.com/showpost.php?p=78478237&postcount=573
for Oreo (8.1) use the last Odin 3.13.1