Verizon LG G2 Bricked - VS98012B - G2 Q&A, Help & Troubleshooting

G2 is brick and will only boot the LG logo and nothing else. I can access download mode but thats all. Drivers dont install when I try to use LGFlash Tool method to fix device. Any other options or solution???? I pretty much scrubbed this whole forum trying everything.

nievesaj said:
G2 is brick and will only boot the LG logo and nothing else. I can access download mode but thats all. Drivers dont install when I try to use LGFlash Tool method to fix device. Any other options or solution???? I pretty much scrubbed this whole forum trying everything.
Click to expand...
Click to collapse
The main problem is that you didn't install a recovery. Because the only issue i know is to push file to sd card via ADB. But you will need the recovery then to find the file pushed to install it then as a new rom.
Also, i have submit a new post requesting how to push file to sd card form recovery mode.
GOOD LUCK

nievesaj said:
G2 is brick and will only boot the LG logo and nothing else. I can access download mode but thats all. Drivers dont install when I try to use LGFlash Tool method to fix device. Any other options or solution???? I pretty much scrubbed this whole forum trying everything.
Click to expand...
Click to collapse
Try to push a recovery.img by dd commands on linux.
It should fix your problem i hope.

Try this:
http://forum.xda-developers.com/showthread.php?t=2582142
Sent from my LG-D801 using Tapatalk

omegajester said:
Try this:
http://forum.xda-developers.com/showthread.php?t=2582142
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I have tried this, but the phone never comes up when I enter "ls /dev/sd*" Its only detected as a "LG charge only interface"

So I tried to complete Linux tutorial and everything seemed like it was working, but the end result was that it did not boot into the recovery. Anything else I can try?

Fix your driver issue. Try Koush's.

Steamer86 said:
Fix your driver issue. Try Koush's.
Click to expand...
Click to collapse
How would i do that? Is that like a custom made driver?

When I enter download mode drivers do not install properly. this is what device manager looks like when phone is connected

So, right click, properties, update / install drivers for each. If you have to, download and extract the LG drivers. For each component, target the driver package you extracted.

Steamer86 said:
So, right click, properties, update / install drivers for each. If you have to, download and extract the LG drivers. For each component, target the driver package you extracted.
Click to expand...
Click to collapse
So I was finally able to installer drivers for g2 to be detected in download mode. Now the problem is that flashing device still fails with saying model number or dll is wrong. But I'm using the files I believe.

nievesaj said:
So I was finally able to installer drivers for g2 to be detected in download mode. Now the problem is that flashing device still fails with saying model number or dll is wrong. But I'm using the files I believe.
Click to expand...
Click to collapse
Try using another computer, see how that works for you.

omegajester said:
Try using another computer, see how that works for you.
Click to expand...
Click to collapse
Finally fixed g2 using linux dd commands! Phone is now usable!

nievesaj said:
Finally fixed g2 using linux dd commands! Phone is now usable!
Click to expand...
Click to collapse
Great stuff, glad to hear you're back on board!

HELP!!
nievesaj said:
Finally fixed g2 using linux dd commands! Phone is now usable![/Q
I was wondering how you were able to restore your Verizon G2. I have tried it all with no resolution. Any help would be appreciated.
I am rooted and have TWRP installed but my backup has magically disappeared so i cannot boot from my recovery.:crying:
Click to expand...
Click to collapse

Related

[Q] G2 d800 with d802 rom/firmware bad flash

I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help
same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery
ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.
I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt
kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.
bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking
Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole
kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you
Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday

[Q] LG optimus l3 E430 wont boot.. HELP NEEDED

Recently(today) i rooted my phone with framaroot 1.9.1. i installed rom toolbox and the started to change fonts. i applied one font and then i rebooted my phone.but now its not booting up.ias i saw that it wont boot up i pulled out battery and rebooted.it loads lg boot logo and animation but it wont load homescreen.it loads endlessly.
i also tried to wipe data by buttons but when i get the recovery mode loading,it immediately reboots.also i know very little about unbricking android phone by pc.IF YOU CAN HELP ME I AM VERY GRATEFULL(hope thats how they write it)
mariopoldoja said:
Recently(today) i rooted my phone with framaroot 1.9.1. i installed rom toolbox and the started to change fonts. i applied one font and then i rebooted my phone.but now its not booting up.ias i saw that it wont boot up i pulled out battery and rebooted.it loads lg boot logo and animation but it wont load homescreen.it loads endlessly.
i also tried to wipe data by buttons but when i get the recovery mode loading,it immediately reboots.also i know very little about unbricking android phone by pc.IF YOU CAN HELP ME I AM VERY GRATEFULL(hope thats how they write it)
Click to expand...
Click to collapse
Your phone is soft-bricked. Take a look here: http://forum.xda-developers.com/showthread.php?t=2582881
fkn font and bootanimations
mariopoldoja said:
Recently(today) i rooted my phone with framaroot 1.9.1. i installed rom toolbox and the started to change fonts. i applied one font and then i rebooted my phone.but now its not booting up.ias i saw that it wont boot up i pulled out battery and rebooted.it loads lg boot logo and animation but it wont load homescreen.it loads endlessly.
i also tried to wipe data by buttons but when i get the recovery mode loading,it immediately reboots.also i know very little about unbricking android phone by pc.IF YOU CAN HELP ME I AM VERY GRATEFULL(hope thats how they write it)
Click to expand...
Click to collapse
what he said !
and stay away from fonts and bootanimations in rom toolbox (alltogether preferably) awesome app but last screen causes more damage than anything else
IGGYVIP said:
what he said !
and stay away from fonts and bootanimations in rom toolbox (alltogether preferably) awesome app but last screen causes more damage than anything else
Click to expand...
Click to collapse
MY LG MODEL IS LG OPTIMUS L3 II E430
ROM IS STOCK ROM i havent flash it
mariopoldoja said:
MY LG MODEL IS LG OPTIMUS L3 II E430
ROM IS STOCK ROM i havent flash it
Click to expand...
Click to collapse
You can use the L3 unbrick solution with your L3 II and these L3 II roms: http://lg-phone-firmware.com/index.php?id_mod=22
can i use odin to unbrick my phone?of so what do i need?rom or systemfiles?
anyway thank you for helping
mariopoldoja said:
can i use odin to unbrick my phone?of so what do i need?rom or systemfiles?
anyway thank you for helping
Click to expand...
Click to collapse
Odin is only for samsung. For LG, use KDZ updater. You must download rom too. (Links in my previously posts) Not so difficult.
Roms for L3 II (look for your country): http://lg-phone-firmware.com/index.php?id_mod=22
How to: http://forum.xda-developers.com/show....php?t=2582881
Thanks.cant thank you enough.:victory:
the link u posted-are there roms or systemfiles?
where do i get kdz for pc?
sorry about that. i got all i need but cant find usb driver on the lg website. where i can download the usb driver from lg website?
thanks
mariopoldoja said:
the link u posted-are there roms or systemfiles?
where do i get kdz for pc?
Click to expand...
Click to collapse
The link he posted is stock kdz for different countries.
Look for your country and your phone model and download the latest firmware.
mariopoldoja said:
sorry about that. i got all i need but cant find usb driver on the lg website. where i can download the usb driver from lg website?
thanks
Click to expand...
Click to collapse
Here:http://www.mediafire.com/?56ub0cf73thfhtb
thank you very much.
thats all i need i guess.
mariopoldoja said:
thank you very much.
thats all i need i guess.
Click to expand...
Click to collapse
No problem!
one more link in case of:http://www.lg.com/uk/support/software-manuals
kdz updater needs to run as administrator but when i right click it theres not a way to run it as administrator
mariopoldoja said:
kdz updater needs to run as administrator but when i right click it theres not a way to run it as administrator
Click to expand...
Click to collapse
Right click, properties, compatibility and check "run this program as administrator".
do i need to compress that .rar(kdz updater) into something else?
im runnin on windows 8 there is attributes but wheres compability?
mariopoldoja said:
do i need to compress that .rar(kdz updater) into something else?
im runnin on windows 8 there is attributes but wheres compability?
Click to expand...
Click to collapse
Just unpack your kdz_updater package with winrar in a folder where you want to use it. I don't see anything about incompatibility with win8.
one problem remains
i press volume + and - and power button but doesnt go emergency mode
now i finished it.
i succesfully unbricked my lg thanks to kind people who knew how to do it.
i WILL drop you thanks.

I think my G2 is bricked :(

I had a rooted LG G2 D802 on EE with KK update that was working fine until today...
I tried to flash a nice custom rom to it and well, to cut a long story short something went wrong and the next thing i know i have a phone which only shows up as about 10 hdd's in windows, and as QHSUSB_BULK in device manager.
I couldn't get it to go into download mode or anything, so i followed the Unbricking guide here:
http://forum.xda-developers.com/showthread.php?t=2582142
Unfortunately this appeared to do nothing for the phone, so i used the Tung Lee guide and this also did nothing.
After i did the above guide the phone was no longer recognised in windows or Linux, but thanks to this post:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
I was able to at least get it back to the state it was in in the first place.
After following all these guides i am now at a loss as to how to sort my phone out,and i'm hoping someone here can point me in the right direction for a fix..
When the phone was working, i put the imei into the firmware engine and it found me the D80220H firmware, i have tried using the bin files from the first guide and from D80220B as well with no luck, so i was wondering if one of the above guides do indeed work, how can i get the .img files i need from a D80220H KDZ?
Its been a long night and i'm now currently without my phone, i'm hoping someone can help and i can get my beloved G2 back to a working state before the weekend.
Thanks in advance, and sorry for the long post.
Tony
Have you simply tried the LG Flash Tool? When it happened to me once, i simply reg
Flashed kdz using this tool and voila!!! Try and report
@Shadowhunta Are you using the twrp IMG from that first guide? That might explain why this isnt working. Extract the kdz using this tool
Flash the aboot, boot and laf then try download mode.
wisefreakz said:
Have you simply tried the LG Flash Tool? When it happened to me once, i simply reg
Flashed kdz using this tool and voila!!! Try and report
Click to expand...
Click to collapse
Gonna try this during my lunchbreak today!
Art Vanderlay said:
@Shadowhunta Are you using the twrp IMG from that first guide? That might explain why this isnt working. Extract the kdz using this tool
Flash the aboot, boot and laf then try download mode.
Click to expand...
Click to collapse
I was using the TWRP from that post, but then i downloaded the latest one and that didn't make any difference, I haven't tried that tool properly yet to get the .img files needed from the KDZ i have for D80220H, but i have flashed the aboot, boot and laf of D80220B and that didn't help either, i couldn't get it into recovery mode, download mode or anything! With the first tutorial i managed to get it into Hard reset mode, but it just hung on processing.
Thanks for the suggestions, i will try them during lunch and get back to you both, thank you so far!
Anyone else had the same problem as me, keep the suggestions coming, all are helpful and appreciated
wisefreakz said:
Have you simply tried the LG Flash Tool? When it happened to me once, i simply reg
Flashed kdz using this tool and voila!!! Try and report
Click to expand...
Click to collapse
Tried this, no dice
Flash tool keeps telling me my phone is disconnected even though its seen as QHSUSB_BULK and as about 10 local disks in disk manager lol
Shadowhunta said:
Tried this, no dice
Flash tool keeps telling me my phone is disconnected even though its seen as QHSUSB_BULK and as about 10 local disks in disk manager lol
Click to expand...
Click to collapse
follow this tutorial... same problem as yours https://www.youtube.com/watch?v=_d5b_osUTug
wisefreakz said:
follow this tutorial... same problem as yours
Click to expand...
Click to collapse
Followed that, still nothing, won't boot into recovery mode, only thing it does is show in windows as a load of local disks, and QHSUSB_BULK in device manager with a yellow exclamation mark
I've followed all the advice so far given and none of it worked, i think i'm screwed :/
Art Vanderlay said:
@Shadowhunta Are you using the twrp IMG from that first guide? That might explain why this isnt working. Extract the kdz using this tool
Flash the aboot, boot and laf then try download mode.
Click to expand...
Click to collapse
Tried this too, nothing, it won't go into download mode.
I have the same problem, please do tell me if any of you find a solution.
I am seriously stuck
What model you guys have?
wisefreakz said:
What model you guys have?
Click to expand...
Click to collapse
I have D802.
Switched999 said:
I have D802.
Click to expand...
Click to collapse
Same, D802.
I phoned LG on saturday and have decided to send it in for repair, i only need it to keep me going till November then i can get the G4.
Well LG have tajen their sweet time, i won't be getting the envelope to send it back in until monday.
Soooo if i can get this fixed before then i would be very happy!
Does anyone else have any ideas please?

[Q] Did I brick my phone?

Hello,
I have a LG G2 (D802). I was busy flashing the stock KDZ, when I got an error. The progress on my phone stopped, and nothing happened anymore. I wanted to try again, so I turned my phone off. Now, when I boot my phone, it gives the LG logo, and then nothing. When I connect it to my pc, I get a lot of format pop-ups.
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2432476
The KDZ I used: Netherlands Open 16GB KitKat D80220D
Furthermore, also while connected to the pc, I only see a folder called "image".
Can someone help me with getting my phone back to stock? It doesn't matter if everything gets wiped, I already backed up everything.
Thanks in advance!
If lots of drives still pop up when you connect your phone to the PC,then follow this guide:https://www.youtube.com/watch?v=hQVTc2m6U-I
I did it,and it fixed my download mode,and I could finally access Download Mode.
If your Download Mode still works,try the TOT method,it worked for me,since the KDZ method would be stuck at 2% every time(in my case).
So,after,or if your download mode works,do try the TOT method.
The Marionette said:
If lots of drives still pop up when you connect your phone to the PC,then follow this guide:https://www.youtube.com/watch?v=hQVTc2m6U-I
I did it,and it fixed my download mode,and I could finally access Download Mode.
If your Download Mode still works,try the TOT method,it worked for me,since the KDZ method would be stuck at 2% every time(in my case).
So,after,or if your download mode works,do try the TOT method.
Click to expand...
Click to collapse
Thanks for your reply, but unfortunately, I even can't get the phone into fastboot mode.
Here are some pictures to show what's inside the "image" folder in the first local disk (= first partition?): 1: http://i.imgur.com/InFoiXA.png 2: http://i.imgur.com/YzjXOmQ.png 3: http://i.imgur.com/JDEnUfa.png
MistaahD said:
Thanks for your reply, but unfortunately, I even can't get the phone into fastboot mode.
Here are some pictures to show what's inside the "image" folder in the first local disk (= first partition?): 1: http://i.imgur.com/InFoiXA.png 2: http://i.imgur.com/YzjXOmQ.png 3: http://i.imgur.com/JDEnUfa.png
Click to expand...
Click to collapse
So you basically cant access the recovery,fastboot nor the Download Mode,right?
Try asking for help on this thread:http://forum.xda-developers.com/showthread.php?t=2432476
People there really know how to help,they helped me there too
Just dont panic,even if your phone is in a "hard brick" state(doubtfully),there is a fix for it too.
I suggest you do not do anything without consulting with other members.
You just have to be patient.
EDIT
Oh,and go to the Device Manager and tell me what name your G2 has when connected to the PC.
The Marionette said:
So you basically cant access the recovery,fastboot nor the Download Mode,right?
Try asking for help on this thread:http://forum.xda-developers.com/showthread.php?t=2432476
People there really know how to help,they helped me there too
Just dont panic,even if your phone is in a "hard brick" state(doubtfully),there is a fix for it too.
I suggest you do not do anything without consulting with other members.
You just have to be patient.
EDIT
Oh,and go to the Device Manager and tell me what name your G2 has when connected to the PC.
Click to expand...
Click to collapse
Indeed, there's really no mode that I can use...
Thanks, I'll ask for help there too! And my phone is being recognized as "QHSUSB_BULK".
MistaahD said:
Indeed, there's really no mode that I can use...
Thanks, I'll ask for help there too! And my phone is being recognized as "QHSUSB_BULK".
Click to expand...
Click to collapse
Hmm,QHSUSB_BULK and no drives popping out?
EDIT
And are you sure you have the LG USB Drivers installed?
EDIT#2
And did you try to install the drivers to another PC and connecting your phone to that PC?
The Marionette said:
Hmm,QHSUSB_BULK and no drives popping out?
EDIT
And are you sure you have the LG USB Drivers installed?
EDIT#2
And did you try to install the drivers to another PC and connecting your phone to that PC?
Click to expand...
Click to collapse
Yep, drivers are installed.
And there are also a lot of drives popping out! See this screenshot: http://i.imgur.com/RcMrAYv.png
Edit: I will try connecting it to another pc now.
MistaahD said:
Yep, drivers are installed.
And there are also a lot of drives popping out! See this screenshot: http://i.imgur.com/RcMrAYv.png
Click to expand...
Click to collapse
Ugh thank god
those drives SHOULD be popping out
Right click on My Computer and select "Manage"
Then,on the left part of that window,you will see the "Disk Management" option. Click it
Then,you should see a certain Disk which is separated into tons of parts.
This part is crucial!
To me,my PCs Hard Drive was "Disk 0",and my fastboot G2 was "Disk 1"
Please tell me which "Disk _" your g2 is.
You can folow this videowithout my help(I could do it by myself in 3 A.M.,so you can do it too! ),I am basically helping you with the same method.
If you want me to proceed with helping you,do tell.
The Marionette said:
Ugh thank god
those drives SHOULD be popping out
Right click on My Computer and select "Manage"
Then,on the left part of that window,you will see the "Disk Management" option. Click it
Then,you should see a certain Disk which is separated into tons of parts.
This part is crucial!
To me,my PCs Hard Drive was "Disk 0",and my fastboot G2 was "Disk 1"
Please tell me which "Disk _" your g2 is.
You can folow this videowithout my help(I could do it by myself in 3 A.M.,so you can do it too! ),I am basically helping you with the same method.
If you want me to proceed with helping you,do tell.
Click to expand...
Click to collapse
My phone is on Disk2. I am now trying to follow this guide, I'll let you know how it worked out.
Edit: wow! I now get the firmware update screen!! What should I do now? What to flash?
MistaahD said:
My phone is on Disk2. I am now trying to follow this guide, I'll let you know how it worked out.
Edit: wow! I now get the firmware update screen!! What should I do now? What to flash?
Click to expand...
Click to collapse
Download the kdz suitable for your model and flash it with LG Flash Tool.
Follow the "Back to stock" guide which you mentioned in the OP.
There will be a link to the KDZ archive for various models,and make sure that you select the kdz for the 32 GB variant if you have a 32 GB variant. Because it will be dangerous if you flash a 16gb variant kdz on a 32 gb phone.
Sent from my LG-D802 using XDA Forums Pro.
EDIT
And if the same thing happens when flashing,fix it again(if it won't access the download mode) and try to flash while using another PC.
Mate, you are the freakin' best!!!! Mah phone works again!!! Now I'm going to install CloudyG2_3.3. What are the steps I need to perform in order to NOT(!!!) brick my phone again?
That'll be my last question, I can't thank you enough!
MistaahD said:
Mate, you are the freakin' best!!!! Mah phone works again!!! Now I'm going to install CloudyG2_3.3. What are the steps I need to perform in order to NOT(!!!) brick my phone again?
That'll be my last question, I can't thank you enough!
Click to expand...
Click to collapse
So the kdz flash worked,and the stock rom boots?
Sent from my LG-D802 using XDA Forums Pro.
Yea it works! I used the stock KK rom though, since Cloudy requires the KK bootloader. I did it right here yes?
MistaahD said:
Yea it works! I used the stock KK rom though, since Cloudy requires the KK bootloader. I did it right here yes?
Click to expand...
Click to collapse
Yes,excellent job.
To root,download "Towelroot" to your phone,install it and press the "Make it rain" button,then install SuperSU,then look for "AutoRec" and make sure you get the version for your variant.
That is just halfway,I will tell you the rest tomorrow,it is 00:26 and I have to get up at 07:00. xD
Sent from my LG-D802 using XDA Forums Pro.
Haha cheers! I think I got it from there, it's just that I don't want to do it in a wrong order haha ;P
And thanks a lot, again! Get your deserved sleep, I should do that too.. Gotta go up at 06:45 hah!! I WIN! xD
Okay,moving on.
Download the BUMPED TWRP from this thread:http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
It is in a flashable zip,so just flash it with the TWRP which was installed by AutoRec.
You must have the bumped version of TWRP!!
After you flashed the BUMP TWRP,reboot recovery.
Here is a bootloader changer,AROMA edition:http://forum.xda-developers.com/lg-g2/general/d802-bootloader-changer-1-1-jb-kk-lp-t3104380
1.Wipe data/factory reset
2.Flash the Bootloader Changer,in AROMA choose the KK bootloader,and install.
3.Flash CloudyG2 3.3
4.Reboot
The Marionette said:
Okay,moving on.
Download the BUMPED TWRP from this thread:http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
It is in a flashable zip,so just flash it with the TWRP which was installed by AutoRec.
You must have the bumped version of TWRP!!
After you flashed the BUMP TWRP,reboot recovery.
Here is a bootloader changer,AROMA edition:http://forum.xda-developers.com/lg-g2/general/d802-bootloader-changer-1-1-jb-kk-lp-t3104380
1.Wipe data/factory reset
2.Flash the Bootloader Changer,in AROMA choose the KK bootloader,and install.
3.Flash CloudyG2 3.3
4.Reboot
Click to expand...
Click to collapse
Hey man,
I noticed that Towelroot doesn't work for LG G2 Lollipop. Any idea how to fix this?
Edit: trying it with another root.
Edit 2: rooted. Going to flash now.
Alright it works, thanks! Can you tell me why I need the bumped version? Just curious
MistaahD said:
Alright it works, thanks! Can you tell me why I need the bumped version? Just curious
Click to expand...
Click to collapse
It is complicated,just do it. XD
I was asking the same thing like you.I ignored others,rushed with roms,didnt use the BUMPED TWRP and my phone was bricked.
Basically the TWRP you get with AutoRec is just capable of flashing partitions for the bootloader,not the system partition(the rom is in the system partition).
The BUMPED TWRP has a certain type of an exploit,and lets us install those system partitions.
Shortly:You can't install roms without the BUMPED TWRP.
Sent from my LG-D802 using XDA Forums Pro.
I'm guessing my phone is refurbished?
I bought a D802 from a third-party, with:
- 32GB ROM
- 4.4.2 D80220b firmware
- 2G, 3G, 4G working
- The csmg.lgmobile.com website said that according to my IMEI, my model is the UAE 32GB D802 and gave me the D80230a firmware for manual flash via LG Flash tool.
I used the phone for a while, rooted it and used Xposed. Never got recovery so no backup(wish I'd seen the SRK tool before). Then I downloaded the firmware from the csmg.lgmobile.com website. I flashed it via the Flash tool and everything seemed fine. Then it booted:
- Touchscreen was erratic. Ghost touches, dead spots, phantom touches, whatever.
- The Baseband Version and IMEI in About Phone both say Unknown
- ROM has converted to a 16GB version
- Download mode is fine along with every other feature of the phone
After that I looked around and found a UAE D80220c firmware and flashed that. It flashed fine but all the above issues remained the same.
I browsed around extensively here and found out:
- Refurbished phones have their back cover and firmware changed to imitate D802's.
- My phone is probably some other G2 model with D802 firmware and an altered IMEI
- The actual model of my device is UNDER the motherboard. Which, apparently, I must get hold of so I can flash the appropriate stock kdz. This gets a bit too hardware-y for me.
So, basically, my phone is no more useful than a brick at the moment. Any expert help would be appreciated but here are the main questions that I'd really like answered:
A. Should I try various flashing the kdz files from different models mentioned in the link I gave up ^there until one clicks and then try to do something about the IMEI?
B. Is there any chance that my phone is beyond repair forever?
C. Should I stop messing around with my mediocre knowledge and take it to a repair shop?

Bricked my 6p, don't know what to do

I tried to install the N preview 3 with TWRP but it said no os installed.
So i wiped everything and tried to restore my M backup.
Now I'm either stuck at the Google logo when I boot or I'm stuck at the TWRP logo when I try to enter recovery.
What should I do to solve this?
flash the factory image
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
step 10.
but read the WHOLE thing
Soulfly3 said:
flash the factory image
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
step 10.
but read the WHOLE thing
Click to expand...
Click to collapse
Thanks, I will.
Is there a proper instruction on how to set up ADB on a mac?
I have adb running on my pc but I can only access my Macbook right now.
http://bfy.tw/5tRm
Tommebaas said:
Thanks, I will.
Is there a proper instruction on how to set up ADB on a mac?
I have adb running on my pc but I can only access my Macbook right now.
Click to expand...
Click to collapse
http://bfy.tw/5tRm
I had a lot of trouble with adb and fastboot but it worked.
Thank you very much! I'm no longer stuck.
Fastboot 9/10 times should be able to fix it. Unless you flashed something wrong on that partition somehow then messed up everything else, you should always be able to factory back with it.
Sent from my Nexus 6P using Tapatalk
i have also the same problem for my micromax a104
but i am not able to install an zip file because it showing internal 0mb
can anyone suggest me something
i also connect my mobile via usb for adb tool but usb is not recognized by my dell pc
MONU95405829 said:
but i am not able to install an zip file because it showing internal 0mb
can anyone suggest me something
i also connect my mobile via usb for adb tool but usb is not recognized by my dell pc
Click to expand...
Click to collapse
Try a different version of twrp
MONU95405829 said:
but i am not able to install an zip file because it showing internal 0mb
can anyone suggest me something
i also connect my mobile via usb for adb tool but usb is not recognized by my dell pc
Click to expand...
Click to collapse
Hi... Try this to fix your USB driver issue: https://forum.xda-developers.com/pixel-xl/how-to/guide-fix-mtp-driver-windows-10-t3570625
For your storage, give more details about what happened that it shows 0mb... Did you wipe, install something lately?
Good luck...
MONU95405829 said:
but i am not able to install an zip file because it showing internal 0mb
can anyone suggest me something
i also connect my mobile via usb for adb tool but usb is not recognized by my dell pc
Click to expand...
Click to collapse
Go to a different forum please. This is for the Neuxs 6p and not micromax a104. Please learn to read before posting for a different type of device.
pctechdroid said:
Go to a different forum please. This is for the Neuxs 6p and not micromax a104. Please learn to read before posting for a different type of device.
Click to expand...
Click to collapse
Lol... Just seen his post title opening the thread in a browser, XDA Labs doesn't display that...
Cheers..!

Categories

Resources