Database Users

[Q] G2 d800 with d802 rom/firmware bad flash

I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.

iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash

bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help

same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app

x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery

ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.

I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out

kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.

iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere

kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll

well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now

kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking

Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you

Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday

[Q] [REQ] DLL for flashing D805 10B TOT file through LG Flash Tool 1.6 - Please help

Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.

Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595

Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...

Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app

Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition

Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew

KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!

LG g2 stuck in fastboot mode

Today i wanted to update to the latest stock 4.4.2 rom but i accidentally installed the d801 version of the rom. Now my phone is stuck in fastboot mode and i dont know what to do. It is a d802 international model. When i trie going into download mode i only see it 1 second and then the fastboot screen pops up again. I cant go in recovery mode also because when i get in the factory reset mode it looks different and no matter what i do i always return to the fastboot mode. Spend some time searching the internet today and i couldn't find something that helped. I saw this though: http://forum.xda-developers.com/showthread.php?t=2522808 so you can do it the other way around. It would be nice if someone could help me

I don't think it would work instead flash back to stock with firmware your phone came with initially
Sent from my LG-D800 using xda app-developers app

lingarajug said:
I don't think it would work instead flash back to stock with firmware your phone came with initially
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
Are there other ways to do that? ADB is not detecting my device(because debug mode is not on i think) and recovery and download mode are not working too

Maybe this thread might help you http://forum.xda-developers.com/showthread.php?t=2477595

there are a ton of resources on this site for recovering from this error, use the search in the top right corner, it has been done many,many times. How I got around flashing an incorrect 801 ROM is to put the phone in Download Mode, install drivers, then set ports, open LG Flash Tool load the correct firmware and use the correct .dll but rename the .dll to the model reported by flash tool, this should let flash tool run and update the phone with your correct SW version.
To get back into D/L mode use the thread Drachenminister posted I have used it before and it works, best of luck!

Drachenminister said:
Maybe this thread might help you http://forum.xda-developers.com/showthread.php?t=2477595
Click to expand...
Click to collapse
thanks i used it before but then it did not work because i was using a different laf.img. now download mode is working

help
jipvanmeel said:
thanks i used it before but then it did not work because i was using a different laf.img. now download mode is working
Click to expand...
Click to collapse
My phone is doing the same thing! Please help how to I get it out of fastboot mode? I've tried recovery it just throws me into factory reset an goes back to fastboot! HELP

jipvanmeel said:
thanks i used it before but then it did not work because i was using a different laf.img. now download mode is working
Click to expand...
Click to collapse
i also couldnt find the proper laf for my phone, d802 i hope that you can help

[Q] Did I brick my phone?

Hello,
I have a LG G2 (D802). I was busy flashing the stock KDZ, when I got an error. The progress on my phone stopped, and nothing happened anymore. I wanted to try again, so I turned my phone off. Now, when I boot my phone, it gives the LG logo, and then nothing. When I connect it to my pc, I get a lot of format pop-ups.
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2432476
The KDZ I used: Netherlands Open 16GB KitKat D80220D
Furthermore, also while connected to the pc, I only see a folder called "image".
Can someone help me with getting my phone back to stock? It doesn't matter if everything gets wiped, I already backed up everything.
Thanks in advance!

If lots of drives still pop up when you connect your phone to the PC,then follow this guide:https://www.youtube.com/watch?v=hQVTc2m6U-I
I did it,and it fixed my download mode,and I could finally access Download Mode.
If your Download Mode still works,try the TOT method,it worked for me,since the KDZ method would be stuck at 2% every time(in my case).
So,after,or if your download mode works,do try the TOT method.

The Marionette said:
If lots of drives still pop up when you connect your phone to the PC,then follow this guide:https://www.youtube.com/watch?v=hQVTc2m6U-I
I did it,and it fixed my download mode,and I could finally access Download Mode.
If your Download Mode still works,try the TOT method,it worked for me,since the KDZ method would be stuck at 2% every time(in my case).
So,after,or if your download mode works,do try the TOT method.
Click to expand...
Click to collapse
Thanks for your reply, but unfortunately, I even can't get the phone into fastboot mode.
Here are some pictures to show what's inside the "image" folder in the first local disk (= first partition?): 1: http://i.imgur.com/InFoiXA.png 2: http://i.imgur.com/YzjXOmQ.png 3: http://i.imgur.com/JDEnUfa.png

MistaahD said:
Thanks for your reply, but unfortunately, I even can't get the phone into fastboot mode.
Here are some pictures to show what's inside the "image" folder in the first local disk (= first partition?): 1: http://i.imgur.com/InFoiXA.png 2: http://i.imgur.com/YzjXOmQ.png 3: http://i.imgur.com/JDEnUfa.png
Click to expand...
Click to collapse
So you basically cant access the recovery,fastboot nor the Download Mode,right?
Try asking for help on this thread:http://forum.xda-developers.com/showthread.php?t=2432476
People there really know how to help,they helped me there too
Just dont panic,even if your phone is in a "hard brick" state(doubtfully),there is a fix for it too.
I suggest you do not do anything without consulting with other members.
You just have to be patient.
EDIT
Oh,and go to the Device Manager and tell me what name your G2 has when connected to the PC.

The Marionette said:
So you basically cant access the recovery,fastboot nor the Download Mode,right?
Try asking for help on this thread:http://forum.xda-developers.com/showthread.php?t=2432476
People there really know how to help,they helped me there too
Just dont panic,even if your phone is in a "hard brick" state(doubtfully),there is a fix for it too.
I suggest you do not do anything without consulting with other members.
You just have to be patient.
EDIT
Oh,and go to the Device Manager and tell me what name your G2 has when connected to the PC.
Click to expand...
Click to collapse
Indeed, there's really no mode that I can use...
Thanks, I'll ask for help there too! And my phone is being recognized as "QHSUSB_BULK".

MistaahD said:
Indeed, there's really no mode that I can use...
Thanks, I'll ask for help there too! And my phone is being recognized as "QHSUSB_BULK".
Click to expand...
Click to collapse
Hmm,QHSUSB_BULK and no drives popping out?
EDIT
And are you sure you have the LG USB Drivers installed?
EDIT#2
And did you try to install the drivers to another PC and connecting your phone to that PC?

The Marionette said:
Hmm,QHSUSB_BULK and no drives popping out?
EDIT
And are you sure you have the LG USB Drivers installed?
EDIT#2
And did you try to install the drivers to another PC and connecting your phone to that PC?
Click to expand...
Click to collapse
Yep, drivers are installed.
And there are also a lot of drives popping out! See this screenshot: http://i.imgur.com/RcMrAYv.png
Edit: I will try connecting it to another pc now.

MistaahD said:
Yep, drivers are installed.
And there are also a lot of drives popping out! See this screenshot: http://i.imgur.com/RcMrAYv.png
Click to expand...
Click to collapse
Ugh thank god
those drives SHOULD be popping out
Right click on My Computer and select "Manage"
Then,on the left part of that window,you will see the "Disk Management" option. Click it
Then,you should see a certain Disk which is separated into tons of parts.
This part is crucial!
To me,my PCs Hard Drive was "Disk 0",and my fastboot G2 was "Disk 1"
Please tell me which "Disk _" your g2 is.
You can folow this videowithout my help(I could do it by myself in 3 A.M.,so you can do it too! ),I am basically helping you with the same method.
If you want me to proceed with helping you,do tell.

The Marionette said:
Ugh thank god
those drives SHOULD be popping out
Right click on My Computer and select "Manage"
Then,on the left part of that window,you will see the "Disk Management" option. Click it
Then,you should see a certain Disk which is separated into tons of parts.
This part is crucial!
To me,my PCs Hard Drive was "Disk 0",and my fastboot G2 was "Disk 1"
Please tell me which "Disk _" your g2 is.
You can folow this videowithout my help(I could do it by myself in 3 A.M.,so you can do it too! ),I am basically helping you with the same method.
If you want me to proceed with helping you,do tell.
Click to expand...
Click to collapse
My phone is on Disk2. I am now trying to follow this guide, I'll let you know how it worked out.
Edit: wow! I now get the firmware update screen!! What should I do now? What to flash?

MistaahD said:
My phone is on Disk2. I am now trying to follow this guide, I'll let you know how it worked out.
Edit: wow! I now get the firmware update screen!! What should I do now? What to flash?
Click to expand...
Click to collapse
Download the kdz suitable for your model and flash it with LG Flash Tool.
Follow the "Back to stock" guide which you mentioned in the OP.
There will be a link to the KDZ archive for various models,and make sure that you select the kdz for the 32 GB variant if you have a 32 GB variant. Because it will be dangerous if you flash a 16gb variant kdz on a 32 gb phone.
Sent from my LG-D802 using XDA Forums Pro.
EDIT
And if the same thing happens when flashing,fix it again(if it won't access the download mode) and try to flash while using another PC.

Mate, you are the freakin' best!!!! Mah phone works again!!! Now I'm going to install CloudyG2_3.3. What are the steps I need to perform in order to NOT(!!!) brick my phone again?
That'll be my last question, I can't thank you enough!

MistaahD said:
Mate, you are the freakin' best!!!! Mah phone works again!!! Now I'm going to install CloudyG2_3.3. What are the steps I need to perform in order to NOT(!!!) brick my phone again?
That'll be my last question, I can't thank you enough!
Click to expand...
Click to collapse
So the kdz flash worked,and the stock rom boots?
Sent from my LG-D802 using XDA Forums Pro.

Yea it works! I used the stock KK rom though, since Cloudy requires the KK bootloader. I did it right here yes?

MistaahD said:
Yea it works! I used the stock KK rom though, since Cloudy requires the KK bootloader. I did it right here yes?
Click to expand...
Click to collapse
Yes,excellent job.
To root,download "Towelroot" to your phone,install it and press the "Make it rain" button,then install SuperSU,then look for "AutoRec" and make sure you get the version for your variant.
That is just halfway,I will tell you the rest tomorrow,it is 00:26 and I have to get up at 07:00. xD
Sent from my LG-D802 using XDA Forums Pro.

Haha cheers! I think I got it from there, it's just that I don't want to do it in a wrong order haha ;P
And thanks a lot, again! Get your deserved sleep, I should do that too.. Gotta go up at 06:45 hah!! I WIN! xD

Okay,moving on.
Download the BUMPED TWRP from this thread:http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
It is in a flashable zip,so just flash it with the TWRP which was installed by AutoRec.
You must have the bumped version of TWRP!!
After you flashed the BUMP TWRP,reboot recovery.
Here is a bootloader changer,AROMA edition:http://forum.xda-developers.com/lg-g2/general/d802-bootloader-changer-1-1-jb-kk-lp-t3104380
1.Wipe data/factory reset
2.Flash the Bootloader Changer,in AROMA choose the KK bootloader,and install.
3.Flash CloudyG2 3.3
4.Reboot

The Marionette said:
Okay,moving on.
Download the BUMPED TWRP from this thread:http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
It is in a flashable zip,so just flash it with the TWRP which was installed by AutoRec.
You must have the bumped version of TWRP!!
After you flashed the BUMP TWRP,reboot recovery.
Here is a bootloader changer,AROMA edition:http://forum.xda-developers.com/lg-g2/general/d802-bootloader-changer-1-1-jb-kk-lp-t3104380
1.Wipe data/factory reset
2.Flash the Bootloader Changer,in AROMA choose the KK bootloader,and install.
3.Flash CloudyG2 3.3
4.Reboot
Click to expand...
Click to collapse
Hey man,
I noticed that Towelroot doesn't work for LG G2 Lollipop. Any idea how to fix this?
Edit: trying it with another root.
Edit 2: rooted. Going to flash now.

Alright it works, thanks! Can you tell me why I need the bumped version? Just curious

MistaahD said:
Alright it works, thanks! Can you tell me why I need the bumped version? Just curious
Click to expand...
Click to collapse
It is complicated,just do it. XD
I was asking the same thing like you.I ignored others,rushed with roms,didnt use the BUMPED TWRP and my phone was bricked.
Basically the TWRP you get with AutoRec is just capable of flashing partitions for the bootloader,not the system partition(the rom is in the system partition).
The BUMPED TWRP has a certain type of an exploit,and lets us install those system partitions.
Shortly:You can't install roms without the BUMPED TWRP.
Sent from my LG-D802 using XDA Forums Pro.

I'm guessing my phone is refurbished?
I bought a D802 from a third-party, with:
- 32GB ROM
- 4.4.2 D80220b firmware
- 2G, 3G, 4G working
- The csmg.lgmobile.com website said that according to my IMEI, my model is the UAE 32GB D802 and gave me the D80230a firmware for manual flash via LG Flash tool.
I used the phone for a while, rooted it and used Xposed. Never got recovery so no backup(wish I'd seen the SRK tool before). Then I downloaded the firmware from the csmg.lgmobile.com website. I flashed it via the Flash tool and everything seemed fine. Then it booted:
- Touchscreen was erratic. Ghost touches, dead spots, phantom touches, whatever.
- The Baseband Version and IMEI in About Phone both say Unknown
- ROM has converted to a 16GB version
- Download mode is fine along with every other feature of the phone
After that I looked around and found a UAE D80220c firmware and flashed that. It flashed fine but all the above issues remained the same.
I browsed around extensively here and found out:
- Refurbished phones have their back cover and firmware changed to imitate D802's.
- My phone is probably some other G2 model with D802 firmware and an altered IMEI
- The actual model of my device is UNDER the motherboard. Which, apparently, I must get hold of so I can flash the appropriate stock kdz. This gets a bit too hardware-y for me.
So, basically, my phone is no more useful than a brick at the moment. Any expert help would be appreciated but here are the main questions that I'd really like answered:
A. Should I try various flashing the kdz files from different models mentioned in the link I gave up ^there until one clicks and then try to do something about the IMEI?
B. Is there any chance that my phone is beyond repair forever?
C. Should I stop messing around with my mediocre knowledge and take it to a repair shop?

Hard bricked my bootloader locked g6 any help?

hey i likely know the answer to this but i got my lg g6 stuck in qualcomm 9008 mode does anyone know anything i can try? i am planning to send this phone in for warranty over a screen issue i was having but when attempting to factory reset it crashed and ended up here. worried they wont honor the warranty now

Use LGUP and UPPERCUT to flash the stock KDZ files. Google how to get into download mode and a guide. Easy to fix.

basicreece said:
Use LGUP and UPPERCUT to flash the stock KDZ files. Google how to get into download mode and a guide. Easy to fix.
Click to expand...
Click to collapse
there is no download mode. its lifeless aside from the pc recognizing a device in qualcomm 9008 mode when i plug it in.

Download will work.

basicreece said:
Download will work.
Click to expand...
Click to collapse
How? every key combination I've tried does nothing. I guess I might be missing something if so could you be more specific? I do appreciate the help

basicreece said:
Download will work.
Click to expand...
Click to collapse
im pretty sure my laf partition is corrupted

Just follow the guide. I've repaired many phones with this issue.

basicreece said:
Just follow the guide. I've repaired many phones with this issue.
Click to expand...
Click to collapse
the guide was as suspected no help. the device remains unresponsive.

Download mode, flash KDZ. Easy.

basicreece said:
Download mode, flash KDZ. Easy.
Click to expand...
Click to collapse
laf is gone (the partition that runs download mode) in this state I need some way of communication to the device in edl mode. I know what you're saying to do but there is no download mode to get into ive tried... multiple times.

It 100% works. I've fixed handful phones with this exact issue.

basicreece said:
It 100% works. I've fixed handful phones with this exact issue.
Click to expand...
Click to collapse
Im not arguing the validity of this technique in most cases this would be proper procedure but my failure happened partway through writing partitions.
the partition map is corrupt and laf is empty there is no download mode to communicate with anymore. very specific to MY device download mode has been in the easiest sense of the situation deleted

Anyone else got some ideas?

Tinyshy said:
Anyone else got some ideas?
Click to expand...
Click to collapse
Sounds like you got 2 warranty issues now. If the bootloader is locked, LG should honour the repair.

There's a program called QFIL (qualcomm flash) and you can use it to flash a kdz. I believe all it does is flashes download mode as once it succeeds and your phone is in download mode you would then reinstall stock kdz. I noticed there's a mention of 'firehose' though and I'm unsure yet of what that is.

Just curious: how did you manage to remove write protected partition while your bootloader is locked?

MS. said:
Just curious: how did you manage to remove write protected partition while your bootloader is locked?
Click to expand...
Click to collapse
I'm also curious as to what steps you took to lead you here @Tinyshy

if you have bootloader unlock you will never stuck in this, btw in the section of lg g6 h872 i open the thread for all people stuck in this, i also open a petition to lg, sorry mate for now we are aaaaaaaaaaaaaaaall stuck in this sh++, no file available for this smartphone for the hard brick, same for the v20 and the g6

help please
basicreece said:
Download mode, flash KDZ. Easy.
Click to expand...
Click to collapse
can you help me where is the tutorial. I relock the bootloader and brick the phone.

camargod20 said:
can you help me where is the tutorial. I relock the bootloader and brick the phone.
Click to expand...
Click to collapse
https://techtrickz.com/how-to/how-t...re-on-lg-g6-guide-to-unbrick-a-bricked-lg-g6/