Database Users

Verizon LG G2 Bricked - VS98012B

G2 is brick and will only boot the LG logo and nothing else. I can access download mode but thats all. Drivers dont install when I try to use LGFlash Tool method to fix device. Any other options or solution???? I pretty much scrubbed this whole forum trying everything.

nievesaj said:
G2 is brick and will only boot the LG logo and nothing else. I can access download mode but thats all. Drivers dont install when I try to use LGFlash Tool method to fix device. Any other options or solution???? I pretty much scrubbed this whole forum trying everything.
Click to expand...
Click to collapse
The main problem is that you didn't install a recovery. Because the only issue i know is to push file to sd card via ADB. But you will need the recovery then to find the file pushed to install it then as a new rom.
Also, i have submit a new post requesting how to push file to sd card form recovery mode.
GOOD LUCK

nievesaj said:
G2 is brick and will only boot the LG logo and nothing else. I can access download mode but thats all. Drivers dont install when I try to use LGFlash Tool method to fix device. Any other options or solution???? I pretty much scrubbed this whole forum trying everything.
Click to expand...
Click to collapse
Try to push a recovery.img by dd commands on linux.
It should fix your problem i hope.

Try this:
http://forum.xda-developers.com/showthread.php?t=2582142
Sent from my LG-D801 using Tapatalk

omegajester said:
Try this:
http://forum.xda-developers.com/showthread.php?t=2582142
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I have tried this, but the phone never comes up when I enter "ls /dev/sd*" Its only detected as a "LG charge only interface"

So I tried to complete Linux tutorial and everything seemed like it was working, but the end result was that it did not boot into the recovery. Anything else I can try?

Fix your driver issue. Try Koush's.

Steamer86 said:
Fix your driver issue. Try Koush's.
Click to expand...
Click to collapse
How would i do that? Is that like a custom made driver?

When I enter download mode drivers do not install properly. this is what device manager looks like when phone is connected

So, right click, properties, update / install drivers for each. If you have to, download and extract the LG drivers. For each component, target the driver package you extracted.

Steamer86 said:
So, right click, properties, update / install drivers for each. If you have to, download and extract the LG drivers. For each component, target the driver package you extracted.
Click to expand...
Click to collapse
So I was finally able to installer drivers for g2 to be detected in download mode. Now the problem is that flashing device still fails with saying model number or dll is wrong. But I'm using the files I believe.

nievesaj said:
So I was finally able to installer drivers for g2 to be detected in download mode. Now the problem is that flashing device still fails with saying model number or dll is wrong. But I'm using the files I believe.
Click to expand...
Click to collapse
Try using another computer, see how that works for you.

omegajester said:
Try using another computer, see how that works for you.
Click to expand...
Click to collapse
Finally fixed g2 using linux dd commands! Phone is now usable!

nievesaj said:
Finally fixed g2 using linux dd commands! Phone is now usable!
Click to expand...
Click to collapse
Great stuff, glad to hear you're back on board!

HELP!!
nievesaj said:
Finally fixed g2 using linux dd commands! Phone is now usable![/Q
I was wondering how you were able to restore your Verizon G2. I have tried it all with no resolution. Any help would be appreciated.
I am rooted and have TWRP installed but my backup has magically disappeared so i cannot boot from my recovery.:crying:
Click to expand...
Click to collapse

[Q] Stuck in TWRP recovery project in G2

Hi out there looking for help with my G2 (D803) . I am new to all this rooting and TWRP stuff but been trying to learn and figure this out. I accepted some update after which the phone only boots into TWRP recovery project v2.6.3.2 now. Looks like I lost everything else (at least that is what I think has happened).
So I have been reading on the forums and learned about using ADB devices and getting the right rom from xda-developers (I am with Telus in Canada) - used http://forum.xda-developers.com/showthread.php?t=2432476 - downloaded LG support tool and flash tool and drivers for phone and installed them all on the computer.
I first had trouble pushing the rom on to my phone (using ADB devices and ADB push commands) because the phone would just turn off while transferring and I could only regain access when the battery is fully drained (happens really fast now?) and I recharge (which seems to take forever now?).
I took the phone to a store and they did some tweaking (says SIMULATING ACTIONS on the title now below TWRP and version number) after which I could push the ROM (I did rename it on the computer) successfully on to the phone using "ADB push" in command prompt.
I proceeded to install the rom and it says successful but clearly it did not work. What I see is:
Finished running boot script.
E:storage partition '//TWRP/BACKUPS/018bf7ce0f4c6fa0' not found
simulation actions ...
updating partition details ...
but then I reboot and it goes back into TWRP.
I tried going through flashtool as well and followed the steps to install the kdz file but it seems like the computer is not connecting to the phone. But if i go to device manager the device shows and says working properly (i installed the drivers already) and you also hear the beep when plugging in the USB cable into the phone. again it also seems to connect through command prompt because i can push a file successfully.
I am getting worried that I am out of luck with this phone . Can anyone help or provide suggestions as to what I am doing wrong? Would really appreciate it. Thanks.

brownbullet said:
Hi out there looking for help with my G2 (D803) . I am new to all this rooting and TWRP stuff but been trying to learn and figure this out. I accepted some update after which the phone only boots into TWRP recovery project v2.6.3.2 now. Looks like I lost everything else (at least that is what I think has happened).
So I have been reading on the forums and learned about using ADB devices and getting the right rom from xda-developers (I am with Telus in Canada) - used http://forum.xda-developers.com/showthread.php?t=2432476 - downloaded LG support tool and flash tool and drivers for phone and installed them all on the computer.
I first had trouble pushing the rom on to my phone (using ADB devices and ADB push commands) because the phone would just turn off while transferring and I could only regain access when the battery is fully drained (happens really fast now?) and I recharge (which seems to take forever now?).
I took the phone to a store and they did some tweaking (says SIMULATING ACTIONS on the title now below TWRP and version number) after which I could push the ROM (I did rename it on the computer) successfully on to the phone using "ADB push" in command prompt.
I proceeded to install the rom and it says successful but clearly it did not work. What I see is:
Finished running boot script.
E:storage partition '//TWRP/BACKUPS/018bf7ce0f4c6fa0' not found
simulation actions ...
updating partition details ...
but then I reboot and it goes back into TWRP.
I tried going through flashtool as well and followed the steps to install the kdz file but it seems like the computer is not connecting to the phone. But if i go to device manager the device shows and says working properly (i installed the drivers already) and you also hear the beep when plugging in the USB cable into the phone. again it also seems to connect through command prompt because i can push a file successfully.
I am getting worried that I am out of luck with this phone . Can anyone help or provide suggestions as to what I am doing wrong? Would really appreciate it. Thanks.
Click to expand...
Click to collapse
I'm not entirely sure, but it sounds like everything in TWRP is being simulated, which would mean that no files are actually written. Try going into Settings in TWRP, uncheck the "Simulate actions" checkbox, and run the rom installation again.

flutterguy317 said:
I'm not entirely sure, but it sounds like everything in TWRP is being simulated, which would mean that no files are actually written. Try going into Settings in TWRP, uncheck the "Simulate actions" checkbox, and run the rom installation again.
Click to expand...
Click to collapse
Thanks for the reply. It definitely did something because the installation process moves forward now. Now I get:
Zip signature verification failed: 1
Error flashing zip '/sdcard/telus.zip
also when i unclick zip file verification in setting i also see:
checking for MD5 file...
skipping MD5 check: no MD5 file found
So problem with the zip file? I downloaded it off xda-developers but I renamed the file to Telus.zip and pushed it on to the phone in the sdcard directory.

Download the whole Rom and flash it
Sent from my LG-D802 using XDA Premium 4 mobile app

brownbullet said:
Thanks for the reply. It definitely did something because the installation process moves forward now. Now I get:
Zip signature verification failed: 1
Error flashing zip '/sdcard/telus.zip
also when i unclick zip file verification in setting i also see:
checking for MD5 file...
skipping MD5 check: no MD5 file found
So problem with the zip file? I downloaded it off xda-developers but I renamed the file to Telus.zip and pushed it on to the phone in the sdcard directory.
Click to expand...
Click to collapse
you are a fxxxing genius thnx you so much

im going through the same thing
bigpappapuff said:
you are a fxxxing genius thnx you so much
Click to expand...
Click to collapse
Can you help me out? The same thing with my G2 and i have no idea how to fix it.

Chris2312 said:
Can you help me out? The same thing with my G2 and i have no idea how to fix it.
Click to expand...
Click to collapse
More info please.

bender_007 said:
More info please.
Click to expand...
Click to collapse
my g2 was was rooted and got an over the air update so now its just stuck in twrp and all of the memory got wiped so i dont know if its possible to fix it or if i have to get a new phone.

There are a lot of threads for your issue. Will search for one when I'm on lap.
Sent from my LG-D802 using Tapatalk
EDIT: There you go

bender_007 said:
There are a lot of threads for your issue. Will search for one when I'm on lap.
Sent from my LG-D802 using Tapatalk
EDIT: There you go
Click to expand...
Click to collapse
Thank you

flutterguy317 said:
I'm not entirely sure, but it sounds like everything in TWRP is being simulated, which would mean that no files are actually written. Try going into Settings in TWRP, uncheck the "Simulate actions" checkbox, and run the rom installation again.
Click to expand...
Click to collapse
Hi,
Was stuck with my HTC Butterfly x920d with the same. Thanks for your guidance, was able to recover.
Foolishly, I had SIMULATE option checked in the recovery settings. Though was able to boot into system but no account, no google & reset stuck into recovery.
Thanks a ton
(I was trying to reset this device for my father)

flutterguy317 said:
I'm not entirely sure, but it sounds like everything in TWRP is being simulated, which would mean that no files are actually written. Try going into Settings in TWRP, uncheck the "Simulate actions" checkbox, and run the rom installation again.
Click to expand...
Click to collapse
How do you get into settings when it goes straight to simulating actions?

install update

Hi guys. I have TWRP installed on my phone and I want the latest Android update. If I download the whole package can I then just install the system and boot files via TWRP? Or is it something more I need to do and can I just keep my data?

chrb1985 said:
Hi guys. I have TWRP installed on my phone and I want the latest Android update. If I download the whole package can I then just install the system and boot files via TWRP? Or is it something more I need to do and can I just keep my data?
Click to expand...
Click to collapse
Use fastboot and follow section 9:
https://forum.xda-developers.com/showthread.php?t=3206928
Sent from my Nexus 5X using Tapatalk

Is it no way around fastboot?

chrb1985 said:
Is it no way around fastboot?
Click to expand...
Click to collapse
You can flash vendor, boot, and system images using TWRP then root again. However, bootloader and radio must be flashed either as a zip in TWRP or via fastboot. Bootloader and radio images cannot be flashed via the TWRP "image install." It is recommended that you flashed radio and bootloader through fastboot.
Sent from my Nexus 5X using Tapatalk

Okay thanks a lot. But my problem is that when I connect my USB cable the phone don't give me any options.. it just charges. That's why I want to try to start fresh again.. do you may have some tips?

chrb1985 said:
Okay thanks a lot. But my problem is that when I connect my USB cable the phone don't give me any options.. it just charges. That's why I want to try to start fresh again.. do you may have some tips?
Click to expand...
Click to collapse
Hey, click reply when you post. It gives the person helping you a notification that you've responded lol
If using windows, try to reinstall the Windows driver and minimal adb tools from the guide below:
https://forum.xda-developers.com/showthread.php?t=3206928
Sent from my Nexus 5X using Tapatalk

SlimSnoopOS said:
Hey, click reply when you post. It gives the person helping you a notification that you've responded lol
If using windows, try to reinstall the Windows driver and minimal adb tools from the guide below:
https://forum.xda-developers.com/showthread.php?t=3206928
Click to expand...
Click to collapse
You see the problem is the I am not an administrator on any of the available PC's .. but it seems to be something wrong with the phone. Because when I connect it it does not happen anything. The only issue is that I can't transfer files from the phone to the computer, not even not, like mtp.. do you understand?

chrb1985 said:
You see the problem is the I am not an administrator on any of the available PC's .. but it seems to be something wrong with the phone. Because when I connect it it does not happen anything. The only issue is that I can't transfer files from the phone to the computer, not even not, like mtp.. do you understand?
Click to expand...
Click to collapse
If it's stock you like could always flash SuperXe . 8.1 versions are latest stock and 8.0 is built from stock source with latest security. All of which are flashable via twrp. On a side note pick yourself up cheap otg cable so you can backup your files on thumb drive. Makes it real easy if you have to completely wipe your phone. Especially if you don't have much access or having issues with computer.

Exodusche said:
If it's stock you like could always flash SuperXe . 8.1 versions are latest stock and 8.0 is built from stock source with latest security. All of which are flashable via twrp. On a side note pick yourself up cheap otg cable so you can backup your files on thumb drive. Makes it real easy if you have to completely wipe your phone. Especially if you don't have much access or having issues with computer.
Click to expand...
Click to collapse
Hi again. I have now tried a few different rooms and the problem persist.. but my computer connects to other phones. Just not the angler.. any thoughts?

chrb1985 said:
Hi again. I have now tried a few different rooms and the problem persist.. but my computer connects to other phones. Just not the angler.. any thoughts?
Click to expand...
Click to collapse
I really couldn't tell you don't remember having to really install any drivers . I installed nexus toolkit though maybe that did. Check device manager if your using Windows and see if anything is coming up. I think I remember someone having to roll back driver to get his 6p to work on Windows 10. Then the obvious trying different cable and USB ports. Try putting USB debugging on in developer options. That's all I can think of sorry not much help .

Exodusche said:
I really couldn't tell you don't remember having to really install any drivers . I installed nexus toolkit though maybe that did. Check device manager if your using Windows and see if anything is coming up. I think I remember someone having to roll back driver to get his 6p to work on Windows 10. Then the obvious trying different cable and USB ports. Try putting USB debugging on in developer options. That's all I can think of sorry not much help .
Click to expand...
Click to collapse
I will try it tomorrow

Exodusche said:
I really couldn't tell you don't remember having to really install any drivers . I installed nexus toolkit though maybe that did. Check device manager if your using Windows and see if anything is coming up. I think I remember someone having to roll back driver to get his 6p to work on Windows 10. Then the obvious trying different cable and USB ports. Try putting USB debugging on in developer options. That's all I can think of sorry not much help .
Click to expand...
Click to collapse
Okey buddy! Thanx anyway

Le pro 3 x720 brick?

Hi, since yesterday I have a big problem with my le pro 3, while charging the phone suddenly turned off. The system did not want to turn on, so I went into recovery (TWRP) and tried to format and upload a new rom, unfortunately during the flashing, a blue screen appeared. When changing the kernel, the flashing of the rom was done, but with the installation of the gapps it hung. I tried to install another rom, but it also spilled, with this addition, that I can not enter recovery, because artifacts appear or reboots.. Only fastboot works. With it, I tried to flash the kernel, recovery, but it did not do anything. I also used (TOOL ALL in ONE) and uploaded the stock rom, but the phone still does not work. Do you know what else could help, or is buying a new phone? Thanks for help

If you can use fast boot, your phone is not hard bricked. A brick is when you can not do anything , you will have a black screen and a red blinking light if a usb cable is connected.
Try pushing Twrp ( newest version) to the phone. If that is successful boot to recovery, fully wipe your phone, reboot to recovery and install you Rom> Gapps, and Magisk. I would suggest initially flashing Lineage 15.1. Once your phone is restored, flash whatever you would like.
If it doesn't work try another cable, or another port, or another computer. Computer needs to be up to date and you may need to temporarily disable antivirus, if the All in One tool isn't working its likely that your computer is blocking the install. especially if you are using Windows 10. All the program to be open within your firewall settings. Make sure its up to date and use AIO to update android drivers and adb.

I'm not giving anything, I still can't get into recovery

miichus said:
I'm not giving anything, I still can't get into recovery
Click to expand...
Click to collapse
Click reply to the person you are talking to otherwise, they will not receive a notification of your response.
Next, if you expect some help, be courteous, to people spending their own limited free time to help with your self created issue by clicking the thank you button.
Finally read this link: https://forum.xda-developers.com/showpost.php?p=76947769&postcount=4

tsongming said:
Click reply to the person you are talking to otherwise, they will not receive a notification of your response.
Next, if you expect some help, be courteous, to people spending their own limited free time to help with your self created issue by clicking the thank you button.
Finally read this link: https://forum.xda-developers.com/showpost.php?p=76947769&postcount=4
Click to expand...
Click to collapse
The operation in flashone goes well, but it still does not help. System and recovery does not boot, only fastboot

miichus said:
The operation in flashone goes well, but it still does not help. System and recovery does not boot, only fastboot
Click to expand...
Click to collapse
What does the log say?
if you are getting no errors at at and can only boot to fastboot try the All in One tool or use the QPST method to unbrick. Also, some posted versions of Qfil are corrupted. Did you use the version that I provided a link for?

tsongming said:
What does the log say?
if you are getting no errors at at and can only boot to fastboot try the All in One tool or use the QPST method to unbrick. Also, some posted versions of Qfil are corrupted. Did you use the version that I provided a link for?
Click to expand...
Click to collapse
For the second time I tried to use flashOne and the phone started up. When entering the pin code, the phone was stuck again. When I wanted to reboot, I could only enter fastboot again.

miichus said:
For the second time I tried to use flashOne and the phone started up. When entering the pin code, the phone was stuck again. When I wanted to reboot, I could only enter fastboot again.
Click to expand...
Click to collapse
For the second time I tried to use flashOne
Click to expand...
Click to collapse
Okay sure, I provided you with a link to the correct files to use. I.E Flash 2.0 and le_zl1_qfil_ufs_fix.zip
Twice you have mentioned that you are using flash One, when you should be using flash 2.0
What Pin code?
Your pin error sounds like you are either using the old Qfil ( its corrupted, and never worked for anyone. ) Or the technician repair rom did not complete. There will be a log file on the PC from Flash 2, not the phone, is port 9008 open in device manager?
There should be no pin code, if qfil was installed, all of your data would be wiped, did you encrypt the phone with 3rd party software?
Are also using the wrong version of Qfil?
Review these additional steps
https://forum.xda-developers.com/showpost.php?p=76100899&postcount=121

tsongming said:
Okay sure, I provided you with a link to the correct files to use. I.E Flash 2.0 and le_zl1_qfil_ufs_fix.zip
Twice you have mentioned that you are using flash One, when you should be using flash 2.0
What Pin code?
Your pin error sounds like you are either using the old Qfil ( its corrupted, and never worked for anyone. ) Or the technician repair rom did not complete. There will be a log file on the PC from Flash 2, not the phone, is port 9008 open in device manager?
There should be no pin code, if qfil was installed, all of your data would be wiped, did you encrypt the phone with 3rd party software?
Are also using the wrong version of Qfil?
Review these additional steps
https://forum.xda-developers.com/showpost.php?p=76100899&postcount=121
Click to expand...
Click to collapse
I am using flashone 2.0 and flashing from your link, the file "le_zl1_qfil_ufs_fix.zip". Port 9008 is open. After three flash in 2.0 flash, I could enter recovery, but when flashing custom rom, a blue screen appeared.

Not enough information, did you follow all of the steps? You can't just flash a Rom after unbricking.
To be clear
You restored the phone, booted into the system, turned on developer options, checked oem unlocking, booted into recovery, and did a factory reset to repair the storage as outlined in my instructions link?
Then booted into the system again, turned on developer options, checked oem unlocking, checked that storage is accurate?
From this point you start over, if your storage issue isn't fixed you will get a blue screen.
After you have perform those steps you should be able to use the all in one tool to check that the bootloader is unlocked, install the latest TWRP, compatible Rom, Gapps and latest magisk.
If you still have issues after all of that. No doubt, its hardware related. It could be one part or several parts. Time to buy a new phone.
Sent from my Pixel XL using XDA Labs

tsongming said:
Not enough information, did you follow all of the steps? You can't just flash a Rom after unbricking.
To be clear
You restored the phone, booted into the system, turned on developer options, checked oem unlocking, booted into recovery, and did a factory reset to repair the storage as outlined in my instructions link?
Then booted into the system again, turned on developer options, checked oem unlocking, checked that storage is accurate?
From this point you start over, if your storage issue isn't fixed you will get a blue screen.
After you have perform those steps you should be able to use the all in one tool to check that the bootloader is unlocked, install the latest TWRP, compatible Rom, Gapps and latest magisk.
If you still have issues after all of that. No doubt, its hardware related. It could be one part or several parts. Time to buy a new phone.
Sent from my Pixel XL using XDA Labs
Click to expand...
Click to collapse
Once we managed to load the system, which hung up after 3 seconds and the whole situation started again. Failed to reload the system or enter recovery. I did all the steps in turn. After the system startup I did not even manage to enter the settings, because it has already hung up and restarted.

miichus said:
Once we managed to load the system, which hung up after 3 seconds and the whole situation started again. Failed to reload the system or enter recovery. I did all the steps in turn. After the system startup I did not even manage to enter the settings, because it has already hung up and restarted.
Click to expand...
Click to collapse
That sucks!
Its either that the partitions are inaccurate or you have hardware problems.
If its partitions, its not something that I have experience with. However, I did find this link; which has instructions for resolving partition issues using the MiniTool Partition Wizard and HDD Raw Copy Tool. https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html

tsongming said:
That sucks!
Its either that the partitions are inaccurate or you have hardware problems.
If its partitions, its not something that I have experience with. However, I did find this link; which has instructions for resolving partition issues using the MiniTool Partition Wizard and HDD Raw Copy Tool. https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
Click to expand...
Click to collapse
Hi tsongming Where do I get this files ???
* prog_emmc_firehose_8936.mbn (I think for our x720 has to be prog_emmc_firehose_8916.mbn)
* rawprogram0.xml
* patch0.xml
I have seen this procedure on different sites but none of them provide this files
I hope you can help me
Thanks in advance

mavelino said:
Hi tsongming Where do I get this files ???
* prog_emmc_firehose_8936.mbn (I think for our x720 has to be prog_emmc_firehose_8916.mbn)
* rawprogram0.xml
* patch0.xml
I have seen this procedure on different sites but none of them provide this files
I hope you can help me
Thanks in advance
Click to expand...
Click to collapse
They should download automatically, if you follow the instructions on those previous Links . The instructions should show which folders the files are located in.
Luckily, I saved these files the last time I de-bricked someones phone.
Here is the link to my Google Drive: https://drive.google.com/open?id=1mjvi_FR4Xh9QfSg6imMLduQ6p3zP2e_u
See the Thanks button: Click it, send cash or both.

tsongming said:
They should download automatically, if you follow the instructions on those previous Links . The instructions should show which folders the files are located in.
Luckily, I saved these files the last time I de-bricked someones phone.
Here is the link to my Google Drive: https://drive.google.com/open?id=1mjvi_FR4Xh9QfSg6imMLduQ6p3zP2e_u
See the Thanks button: Click it, send cash or both.
Click to expand...
Click to collapse
Noup they do not download automatically (I followed the instructions), I tried flashone tool procedure in a windows 7 computer and did not work (I already tried this a lot of times on to differente laptops with windows 10), I have not tried the qfil procedure because I do not have the files I mentioned before. Please if you have them upload them (* prog_emmc_firehose_8996.mbn* rawprogram0.xml* patch0.xml)
Thanks in advance

mavelino said:
Noup they do not download automatically (I followed the instructions), I tried flashone tool procedure in a windows 7 computer and did not work (I already tried this a lot of times on to differente laptops with windows 10), I have not tried the qfil procedure because I do not have the files I mentioned before. Please if you have them upload them (* prog_emmc_firehose_8996.mbn* rawprogram0.xml* patch0.xml)
Thanks in advance
Click to expand...
Click to collapse
All I have is in the link you just responded to.
if that doesn't work try unpacking the Qfil and and see if you can just extract them.
I will look further when I get back home.

i also have an bricked LEX 3 Pro . i bought it as an X722 but of cause iam not shure . could also be an X720. i can not find the difference.
so Phone has only fastboot.
when i plug in usb cable it just reboot every 10 sec . no charging sreen appears
i flash Qfil, but not helped it stay the same

Device not detecting in Adb devices but gets detect in fastboot devices

Hi, everyone I tried to flash a new recovery on X00T but before I did this I Wiped all the data except internal storage. I Flashed the new recovery (completely forget about there being no OS) I rebooted to recovery and ignored the no OS message as the device rebooted I came on a black screen even the fast boot mode screen was black. I had no idea what to do so I tried to install the old TWRP from power shell/Adl so I could have a recovery and then install Custom rom again from recovery.
But there when I try to flash a file with command
-> Fastboot flash Recovery ....(..= file name)
It is shown completed on pc but on android even after rebooting I can't get anything except the black screen. This is what I get when I enter the following commands
-> fastboot devices
My devices number is shown
but if I type.
-> adl devices
My device is not shown.
But when I press the recovery buttons on device adl devices Is able to recognise device as a recovery screen device.
And the extra bonus on this is when I try to flash rom or fimware from adl. It says unable to read zip file.
So can anyone tell me if there is a way to fix this unable to read zip file problem. (I have tried uninstalling and reinstalling drivers from device manager & tried installing 64 bit files also)
Is there a command to flash rom from recovery. Or any way to fix this black screen
Thanks to everyone for reading any advice would be really helpful at this time.

Try using Asus Flash Tool to flash stock ROM

Tianhe said:
Try using Asus Flash Tool to flash stock ROM
Click to expand...
Click to collapse
Thanks for helping, Will surely try it. Can you please provide the link from where i can download flash tool?

Xda user 101 said:
Thanks for helping, Will surely try it. Can you please provide the link from where i can download flash tool?
Click to expand...
Click to collapse
I am not sure if posting external links (except hosting sites) is permitted. A simple google search or search within XDA will give you the results. In case you face difficulty, PM me.

Try to use this adb
If it still doesn't get detected, maybe use usb hub.
I wrote a thread guiding people on how to install stuff and my experience (issues) that is similar to yours. Not sure if my thread will help ya though

Vysair said:
Try to use this adb
If it still doesn't get detected, maybe use usb hub.
I wrote a thread guiding people on how to install stuff and my experience (issues) that is similar to yours. Not sure if my thread will help ya though
Click to expand...
Click to collapse
Bro tried as you said but didn't worked but finally found a solution. Now device is on and working again.

If anyone else face this issue I followed this thread https://forum.xda-developers.com/as...uide-revert-to-stock-rom-lock-t3798420/page46
It worked on my phone it is on again. Will have to root again but learned my lesson will never try new twrp when there is no os installed. :laugh:

thanks you Tianhe and Vysair for your advice for solving the issue.