Hi, I got a GalaxyS4 (i9505) and i played around with it a little, installed some mods, a custom recovery and a custom rom (no knox flag). Now i'm thinking of giving it back and get a Note3 instead, how can I get it back like it was? I mean, old recovery and stock rom? it was 4.2.2 bandbase was xxubmga.
Thanks,
Triangle Away, stock rom from Samfirmware for country/carrier, flash with Odin, factory reset, done.
MistahBungle said:
Triangle Away, stock rom from Samfirmware for country/carrier, flash with Odin, factory reset, done.
Click to expand...
Click to collapse
By flashing stock rom does the stock recovery come included?
Btw, my phone is factory unlocked, which region do i choose? XEG (n/a)? I'm getting the firmware here.
Thanks and happy holidays!
fol545 said:
By flashing stock rom does the stock recovery come included?
Btw, my phone is factory unlocked, which region do i choose? XEG (n/a)? I'm getting the firmware here.
Thanks and happy holidays!
Click to expand...
Click to collapse
1. Yes
2. What region are u from? Remember flash always old 4.2.2 Stock Rom :highfive:
I'm from Portugal, Europe.
Related
Hi, so i've got a few problems going with my i9505 Telstra S4.
I flashed to 4.3 trying it out then went back to original stock rom 4.2.2 from sam mobile but it's not registering a simcard in the device
at all.I have flashed modem a few times and it picks it up for a bit then drops it again. When I go to reflash the new rom
I go and flash philz and completely data, cache and dalvik wipe the phone befor doing it but after wards when the phone is on the main screen
after putting in the info and plugging into a computer, it comes up with the same name as it did before for the device even though i changed it, not sure if that means anything.
Not sure where to go from here and sorry for the terrible grammar
You can't go back to 4.2.2 stock once you flashed the 4.3 stock rom. The reasons are related to the new bootloader.
I suggest you instead flash a 4.3 rom.. perhaps the BTU one.
xyzulu said:
You can't go back to 4.2.2 stock once you flashed the 4.3 stock rom. The reasons are related to the new bootloader.
I suggest you instead flash a 4.3 rom.. perhaps the BTU one.
Click to expand...
Click to collapse
Okay Thanks
You wouldn't be able to provide a link could you?
Thanks again
xyzulu said:
You can't go back to 4.2.2 stock once you flashed the 4.3 stock rom. The reasons are related to the new bootloader.
I suggest you instead flash a 4.3 rom.. perhaps the BTU one.
Click to expand...
Click to collapse
Sorry i found one on Sam MObile, but would I need to flash modem's or anything?
Cheers
nibregnig1 said:
Sorry i found one on Sam MObile, but would I need to flash modem's or anything?
Cheers
Click to expand...
Click to collapse
You would need to flash the entire package. Please take the time to read up on this process... and make sure the phone you are flashing suits the firmware you flash. In this forum your will find clear instructions on how to flash 4.3 for the i9505 from Sammobile.
Hi
I need to return my S4 to Samsung for a warranty repair. I can't find my original nand back up. I need a link to uk stock roms please to flash in odin I do believe. And stock recovery. If this is done will it be back to stock and no counter?? I've not updated bootloader so no Knox counter.
Also will this make it Kies update able again???
Cheers People
Robbo
Robbo106 said:
Hi
I need to return my S4 to Samsung for a warranty repair. I can't find my original nand back up. I need a link to uk stock roms please to flash in odin I do believe. And stock recovery. If this is done will it be back to stock and no counter?? I've not updated bootloader so no Knox counter.
Also will this make it Kies update able again???
Cheers People
Robbo
Click to expand...
Click to collapse
Hello mate, If you did not updated your phone on 4.3 samsung stock firmware then please feel free to download the 4.2.2 from here http://www.sammobile.com/firmwares/2/ and flash it via odin by selecting PDA . then send it back have a nice day.
Hi
Thanks for the reply but it just takes me to the home page of sammobile. And what do you mena by send it back?? Thanks??
Do these firmwares also flash stock recovery??
Cheers Robbo
Repulsa said:
Hello mate, If you did not updated your phone on 4.3 samsung stock firmware then please feel free to download the 4.2.2 from here http://www.sammobile.com/firmwares/2/ and flash it via odin by selecting PDA . then send it back have a nice day.
Click to expand...
Click to collapse
Robbo106 said:
Hi
Thanks for the reply but it just takes me to the home page of sammobile. And what do you mena by send it back?? Thanks??
Do these firmwares also flash stock recovery??
Cheers Robbo
Click to expand...
Click to collapse
Hello again , you need to sign up sir in order to check it out then click the Link that i gave you and download the stock rom that you need , once you flash this stock rom from samsung, you should good to go to send it for warranty/repair. more to say just like the first time you bought your phone. have a nice day.
Repulsa said:
Hello again , you need to sign up sir in order to check it out then click the Link that i gave you and download the stock rom that you need , once you flash this stock rom from samsung, you should good to go to send it for warranty/repair. more to say just like the first time you bought your phone. have a nice day.
Click to expand...
Click to collapse
Thanks again. All signed up and it takes me to the firmware and phone select page.
If I select my phone and UK it gives me a MK9 version. Is that ok? or will that be 4.3.
Can I ask another question too please. If I was to update to an official sammy 4.3 rom and then root. Would I still get the knox count or problems??
Robbo
Robbo106 said:
Thanks again. All signed up and it takes me to the firmware and phone select page.
If I select my phone and UK it gives me a MK9 version. Is that ok? or will that be 4.3.
Can I ask another question too please. If I was to update to an official sammy 4.3 rom and then root. Would I still get the knox count or problems??
Robbo
Click to expand...
Click to collapse
Let me makes things clear for you mate , right now i have an old bootloader (No Knox warranty void, when i go to download mode) means i can flash any 4.2.2 firmware without having any knox void warranty. this is what i do i flash a pre-rooted rom then use a triangle away to reset the binary and use Phil recovery and flash any 4.3 custom rom i want! but if you need to send your phone to samsung because there's a hardware problem , feel free to flash a 4.2 from you country.(Since more likely after they fix your phone they will prolly update it to 4.3) remember flashing a 4.3 mk9 stock rom means a new bootloader/Knox void warranty 0x0 willl be activate.So if you flash root/custom rom that should void your warranty to 0x1 Please feel free to check more about Knox from here http://forum.xda-developers.com/showthread.php?t=2447832
Robbo106 said:
Thanks again. All signed up and it takes me to the firmware and phone select page.
If I select my phone and UK it gives me a MK9 version. Is that ok? or will that be 4.3.
Can I ask another question too please. If I was to update to an official sammy 4.3 rom and then root. Would I still get the knox count or problems??
Robbo
Click to expand...
Click to collapse
1- Ur phone is unbranded? MK9 use android 4.3. I will tell ya the correct firmware for u if u are lil confused
2- If u root it u will void ur warranty. Ur knox will be 0x1
Repulsa said:
Let me makes things clear for you mate , right now i have an old bootloader (No Knox warranty void, when i go to download mode) means i can flash any 4.2.2 firmware without having any knox void warranty. this is what i do i flash a pre-rooted rom then use a triangle away to reset the binary and use Phil recovery and flash any 4.3 custom rom i want! but if you need to send your phone to samsung because there's a hardware problem , feel free to flash a 4.2 from you country.(Since more likely after they fix your phone they will prolly update it to 4.3) remember flashing a 4.3 mk9 stock rom means a new bootloader/Knox void warranty 0x0 willl be activate.So if you flash root/custom rom that should void your warranty to 0x1 Please feel free to check more about Knox from here http://forum.xda-developers.com/showthread.php?t=2447832
Click to expand...
Click to collapse
Yes I understood that. I'm in the same situation as you as in the way I flash ROMS. I didn't realise that the counter still worked even if it was an official update with bootloader, just thought if I flashed a custom rom with new bootloader it started the Knox warranty void.
Thanks for all your help. I'm gutted now though coz your right Samsung probably update my phone and then I'm b****ed anyway if I root again and custom rom it. Your link doen't take me to a 4.2.2. rom though so I'll keep looking.
Cheers Robbo
Robbo106 said:
Yes I understood that. I'm in the same situation as you as in the way I flash ROMS. I didn't realise that the counter still worked even if it was an official update with bootloader, just thought if I flashed a custom rom with new bootloader it started the Knox warranty void.
Thanks for all your help. I'm gutted now though coz your right Samsung probably update my phone and then I'm b****ed anyway if I root again and custom rom it. Your link doen't take me to a 4.2.2. rom though so I'll keep looking.
Cheers Robbo
Click to expand...
Click to collapse
Im sorry about that here you go www.sammobile.com/firmwares/1/ and incase your having trouble feel free to ask here and ill answer you whenever i can or you can ask @Joku1981 as well. have a nice day.
Joku1981 said:
1- Ur phone is unbranded? MK9 use android 4.3. I will tell ya the correct firmware for u if u are lil confused
2- If u root it u will void ur warranty. Ur know will be 0x1
Click to expand...
Click to collapse
Yes I'm unbranded and on 3 network. Unlocked
Would rather have sammy 4.2.2 to return it on please. Not confused just don't know how to find older version. It just brings up latest.
Robbo
Robbo106 said:
Yes I'm unbranded and on 3 network. Unlocked
Would rather have sammy 4.2.2 to return it on please. Not confused just don't know how to find older version. It just brings up latest.
Robbo
Click to expand...
Click to collapse
- UK Android 4.3 -> HERE
- UK Android 4.2.2 -> HERE
Hi you've all been a great help. But the day has come I have to send my s4 in for repairs. Just need some more help.
Please tell me if this is correct method to get back to stock?
Do u flash stock recovery using odin and what options? Pda? Modem?
Then do I use triangle away to reset all counters and then flash stock rom with odin?
Just wanna get it right
Cheers Robbo
Sent from my GT-I9505 using XDA Premium 4 mobile app
Time to restore
Hi you've all been a great help. But the day has come I have to send my s4 in for repairs. Just need some more help.
Please tell me if this is correct method to get back to stock?
Do u flash stock recovery using odin and what options? Pda? Modem?
Then do I use triangle away to reset all counters and then flash stock rom with odin?
Just wanna get it right
Cheers Robbo
Joku1981 said:
- UK Android 4.3 -> HERE
- UK Android 4.2.2 -> HERE
Click to expand...
Click to collapse
Robbo106 said:
Hi you've all been a great help. But the day has come I have to send my s4 in for repairs. Just need some more help.
Please tell me if this is correct method to get back to stock?
Do u flash stock recovery using odin and what options? Pda? Modem?
Then do I use triangle away to reset all counters and then flash stock rom with odin?
Just wanna get it right
Cheers Robbo
Click to expand...
Click to collapse
You need to flash a pre-rooted rom from djembey thread. Then you can use triangle away to reset the binary .and the flash a stock rom and sent it for repair. Please read the instruction on djembey thread so you wont void ur warranty.
2nd opinion . Flash a stock rom with odin by selecting PDA. And root your phone using saferoot (i dont know about this if it works) install triangle away . Reset binary . Reflash stock again then send.
Sent from Hell ?
Is the pre rooted stock rom so that triangle away will work??? I'm on a pre rooted custom rom but need a samsung kernal for triangle away to work properly. If a flash the stock rom I have on 4.2.2 will that aslo flash stock recovery???
Repulsa said:
You need to flash a pre-rooted rom from djembey thread. Then you can use triangle away to reset the binary .and the flash a stock rom and sent it for repair. Please read the instruction on djembey thread so you wont void ur warranty.
2nd opinion . Flash a stock rom with odin by selecting PDA. And root your phone using saferoot (i dont know about this if it works) install triangle away . Reset binary . Reflash stock again then send.
Sent from Hell ?
Click to expand...
Click to collapse
Robbo106 said:
Is the pre rooted stock rom so that triangle away will work??? I'm on a pre rooted custom rom but need a samsung kernal for triangle away to work properly. If a flash the stock rom I have on 4.2.2 will that aslo flash stock recovery???
Click to expand...
Click to collapse
Thats correct ,as long its a Stock and rooted then yes you can reset the binary.then flash the stock rom again and you should be fine . incase your phone are still in old bootloader (no knox, never flash 4.3 Samsung rom) then feel free to flash a 4.2.2 Pre-rooted BMGA-odex-FULL from djembey thread ,once your done, Download/Install triangle away and reset the binary, flash a Normal stock rom from samsung, Boot into download mode and you will see it says Official and your good to go Goodluck mate
You've been a great help thanks. Stock recovery is that also flashed when I flash the stock rom last through odin???
So I'm gonna flash a stock rom pre rooted 4.2.2 with CWM then use triangle away then flash stock samsung through odin.
Repulsa said:
Thats correct ,as long its a Stock and rooted then yes you can reset the binary.then flash the stock rom again and you should be fine . incase your phone are still in old bootloader (no knox, never flash 4.3 Samsung rom) then feel free to flash a 4.2.2 Pre-rooted BMGA-odex-FULL from djembey thread ,once your done, Download/Install triangle away and reset the binary, flash a Normal stock rom from samsung, Boot into download mode and you will see it says Official and your good to go Goodluck mate
Click to expand...
Click to collapse
Hi Guys
Basically phone has broken screen and digitiser. Phone does not have knox bootloader. I need to install a non knox BTU rom through odin. The BTU rom needs to be a full wipe rom. Can anybody recommend a rom to install before it goes back to Samsung.
Thanks
J
jmacp said:
Hi Guys
Basically phone has broken screen and digitiser. Phone does not have knox bootloader. I need to install a non knox BTU rom through odin. The BTU rom needs to be a full wipe rom. Can anybody recommend a rom to install before it goes back to Samsung.
Thanks
J
Click to expand...
Click to collapse
I hope u have a i9505. This firmware is android 4.2.2 old bootloader: HERE
Joku1981 said:
I hope u have a i9505. This firmware is android 4.2.2 old bootloader: HERE
Click to expand...
Click to collapse
yip i9505 is that rom a wipe rom ?
Thanks
J
jmacp said:
yip i9505 is that rom a wipe rom ?
Thanks
J
Click to expand...
Click to collapse
Yep
Hi all!
I have a stock Samsung GT-I9505 with 4.2.2
Version Info
AP: I9505XXUAMDM
CP: I9505XXUAMDM
CSC: I9505OXXAMDB
I'd like to update to a stock or stockish rom, without Knox bootloader, updating the modem and then rooting.
I've done a lot of reading on the topic but I'm getting somwhat confused as there are so many different methods depending on the version, and if you have Knox. There are also Modem/Wi-Fi issues etc.
Any tips on the method or can someone advise which stock rom/modem to go for?
I'm trying to set out and build up a step by step method that will avoid any complications.
cps_goodbuy said:
Hi all!
I have a stock Samsung GT-I9505 with 4.2.2
Version Info
AP: I9505XXUAMDM
CP: I9505XXUAMDM
CSC: I9505OXXAMDB
I'd like to update to a stock or stockish rom, without Knox bootloader, updating the modem and then rooting.
I've done a lot of reading on the topic but I'm getting somwhat confused as there are so many different methods depending on the version, and if you have Knox. There are also Modem/Wi-Fi issues etc.
Any tips on the method or can someone advise which stock rom/modem to go for?
I'm trying to set out and build up a step by step method that will avoid any complications.
Click to expand...
Click to collapse
Flash Pre-rootedXXUBMGA through Odin and then Install triangle away and reset the binary , and then flash any Custom Recovery via odin and download a Custom 4.3 rom you want then go to recovery do a full wipe and flash the custom rom you downloaded.. Have a nice day.
Repulsa said:
Flash Pre-rootedXXUBMGA through Odin and then Install triangle away and reset the binary , and then flash any Custom Recovery via odin and download a Custom 4.3 rom you want and flash it via recovery. Have a nice day.
Click to expand...
Click to collapse
Thanks for the info! Still reading all I can to avoid mistakes.
After installing a Custom recovery, I take it I don't need to reset the binary anymore? Will search about whether I can flash back the standard recovery.
Would it not be better to install a Pre-rooted and knox-free stock 4.3 rom? Are there any holes to avoid?
cps_goodbuy said:
Thanks for the info! Still reading all I can to avoid mistakes.
After installing a Custom recovery, I take it I don't need to reset the binary anymore? Will search about whether I can flash back the standard recovery.
Would it not be better to install a Pre-rooted and knox-free stock 4.3 rom? Are there any holes to avoid?
Click to expand...
Click to collapse
Well that's how i do it since im still on old bootloader and and doesnt have knox warranty void (I do it from the scratch because i want a fresh install hehe) , anyways you need to root your phone and install a custom recovery and download a 4.3 custom rom and flash it via recovery , once done flashing you need to flash a 4.3 modem in order to prevent a dropping signal issue. Have a nice day.
Repulsa said:
Well that's how i do it since im still on old bootloader and and doesnt have knox warranty void (I do it from the scratch because i want a fresh install hehe) , anyways you need to root your phone and install a custom recovery and download a 4.3 custom rom and flash it via recovery , once done flashing you need to flash a 4.3 modem in order to prevent a dropping signal issue. Have a nice day.
Click to expand...
Click to collapse
Is it possible to flash a stock 4.3 rom (without the bootloader) so I don't have to do a data wipe?
yuuuuuuuu said:
Is it possible to flash a stock 4.3 rom (without the bootloader) so I don't have to do a data wipe?
Click to expand...
Click to collapse
You can flash a custom 4.3 rom but not a stock 4.3 rom since that will give u a newbootloader mate. Im giving you all the tips i can . But feel free either search the forum or wait for some1's opinion. Have a nice day.
Sent from Hell ?
I'm rooted and currently running this version:-
Banned URL
Can I flash the software shown on SamMobile below?
Banned URL
Thanks
Yes you can.
Thanks. I gather VOD stands for Vodafone but what does BTU stand for? Also will I have to do a Factory Wipe/reset first before using Odin to install the BTU version?
Thanks.
BTU is the UK unbranded rom, meaning it comes without the extra bloatware that phone providers usually install.
It wont hurt to do a factory reset/wipe.
schrodinger56 said:
I'm rooted and currently running this version:-
Can I flash the software shown on SamMobile below?
Thanks
Click to expand...
Click to collapse
You need to remove those links, they are banned on XDA
Use this link the download is fast.
https://mega.co.nz/#!csxW2KZQ!cxvVzJ6fehliaGgPteMi9WQp1eJcNKVgHha22Dml7Ls
Thanks for the file. Can I use TWRP to flash it after doing a factory reset or do I have to use Odin?
That is the stock firmware you can only flash using Odin.
TWRP is for installing custom roms.
schrodinger56 said:
Thanks for the file. Can I use TWRP to flash it after doing a factory reset or do I have to use Odin?
Click to expand...
Click to collapse
ODIN, and flashing a stock ROM will give you back stock everything, including recovery, so you'll need to root / twrp after flashing