Good day! I have 2 jfltexx devices. One comes from Zurich and another one is from Paris. Both have the same ROMs and MDM installed and have been flashed more than once. After installing another one ROM, the french one had errors <<Unfortunately, the process com.andoid.phone has stopped>> just after booting. I have full wiped the phone 4 or more times, flashed modem to I9505XXUEMKE, later to I9505XXUEMK9. Also kernels and ROMs have been changed (together with swiss one).
Is there a way to fix it? It does not bother me very much, but still.
(Yes, I have been looking for solutions. None of them worked)
P.S. I think it started at 4.4.2 v1 of this ROM.
Related
Hi,
I've been on Stock ROMs for some time. Last time I've tried a Custom ROM was a few years back on my new (back then) HTC Sensation.
Now I've changed my Galaxy S4 16GB to Galaxy S4 32GB, and (as it was a phone with different CSC than I wanted) changed CSC code to XEO. After that I've noticed that the KNOX flag has changed to 0x1, so I've read about it (a bit too late) and got to know what it means.
So after about 30min of having the new phone I was without warranty.
Now I'm looking at the Custom ROM possibilities.
Last time I've tried those, then every time that there was an update to those ROMs, one had to flash it manually and then do a wipe (this was very annoying, and because of that I've returned to Stock ROMs with OTA updates after which I didn't have to wipe the phone).
It would be if someone could tell me if that has changed ? (eg. Custom ROMs with something like OTA updates, that use a small update file and update only what is needed, or any other updates that don't involve phone wipes).
I'd like to get a Custom ROM that is practically the same as the Stock ROM, but has the bloatware removed (or an option to do so). The ROM should be rooted (thou I haven't used any apps that require root in a long time, so that is not a must have). But it must have a way of updating without phone wipe (I realize that I'll have to wipe when going from Stock to Custom ROM).
And is there a straight forward how to for going from official Stock I9505XXUDMH6 to a Custom ROM ?
Thank you in advance for any help.
Check the stickies, the development forum, the original development forum, and anywhere on XDA just do a search, far quicker than posting a new thread.
Hello there.
I have been using my n9005 for a while now, have it rooted and I have been messing around with a lot of roms. Recently I installed a version of Cyanogenmod to check it out, the sad part was that the phone didn't work so I had to revert back to TW. I thought I would upgrade to KitKat and my version of CM was KitKat 4.4.2, but now when I try to go back to TW it just won't boot. I've tried a couple of recoveries and I've tried several roms, I've even tried going back to JB but I seriously can't get my phone to boot with TW. Is there any way I can fix this?
I fixed it, apparently my Odin was broken. Sorry for the thread.
I have an s4 from rogers (Canadian model) and initially had cyanogen mod as my rom but I realized that I was missing nearly 5 GB of storage on my phone. I read that to fix this I had to go back to stock using Odin. I went back to stock 4.2.2 using Odin, but then my WiFi stopped working. I couldn't turn WiFi on or search for networks. I then rooted my phone and installed a rom and my WiFi problem was fixed, but now I cant make calls. Every time I try to call someone my screen goes black and the recipient cannot hear me and I cannot hear them. Also, the sound on my phone does not work. I have flashed multiple roms and still get the same problem. Does anyone know any possible solution. I have looked around and many people have had the same problem, but no solution. Any help would be appreciated.
It's because you flashed an old rom (4.2.2) on a newer bootloader. That doesn't work. Flash the latest rom available for you phone.
Lennyz1988 said:
It's because you flashed an old rom (4.2.2) on a newer bootloader. That doesn't work. Flash the latest rom available for you phone.
Click to expand...
Click to collapse
I have flashed multiple roms and most of them were the latest ones (4.4.4). This still did not fix the problem. Is this what you mean?
neogamma said:
I have flashed multiple roms and most of them were the latest ones (4.4.4). This still did not fix the problem. Is this what you mean?
Click to expand...
Click to collapse
I'm sorry, I gave some wrong advice.
It's probably because you are on the old bootloader but you are using a new modem. That's the cause for the problems on our s4. You have a different s4 and there is a different section for your device.
You have to be in this section:
http://forum.xda-developers.com/galaxy-s4-att
They should be able to help you further there.
I have a N900W8, and most ROM builds are for N9005.
I have never had a problem flashing N9005 builds, and all radios working fine, until I tried to flash Audax 11 (running Audax 10.8 now).
After flashing, during the initial setup screens, the WiFi toggle doesn't respond at all. Even if i skip through the rest of the setup, WiFi does not turn on at all.
I tried flashing XNOTE 21, and had the same problem.
Anyone have any ideas?
Baseband is N900W8VLUCNB7, if that matters.
May sound stupid but try flashing a full stock rom package via odin and check if it works with stock roms. That would be the first thing I'd try. Maybe some rom you tried included a modem/baseband that it causing the issue. Flashing back to stock and then switching to another rom again may help.
Flashing stock ROM won't help, and OP is correct. There are some ROMs indeed where WiFi just stops working. I flashed a ROM like that few days ago, I won't name it because of whatever reasons, but it is considered one of the most popular ROM for N9005 and N900T or some model and can be found under T Mobile section, and after flashing the ROM my WiFi just wouldn't turn on. I don't know what was the reason, didn't care to be honest, but then I saw that there are some flash-able zip packages which fixes the issue, again, didn't care to flash those so called fixes.
So OP might wanna look for one of those package for the ROM he is using.
Hello,
I have recently replaced the motherboard on my N910C with N910F (because it was the only one that I could find at that moment). I had to replace the camera as well because they are not compatible. I got my motherboard from Aliexpress, and it seems to be working fine. It came with some preinstalled software that was running Android 5.0.1. on PHE CSC which seems to be Spanish software. I flashed the latest Marshmallow 6.0.1. from Sammobile and its working great. But I wanted to flash Astra Dream UX ROM v.40F so I rooted the device, flashed TWRP and put the ROM on SD card, wiped everyhting (I have flashed roms before on my S4) and after successful installation, what happens is that phone constantly reboots after Samsung splash screen. It managed to get to boot animation first time after flashing, but after that, any Custom ROM that I flash installs without issues, but doesn't go further than Splash screen logo. I have tried 3 or 4 TWRP versions, but none of them seems to fix the issue. So I reflashed stock ROM using Odin and now its working fine. Any suggestion what might be the issue?
Mirsaneli said:
Hello,
I have recently replaced the motherboard on my N910C with N910F (because it was the only one that I could find at that moment). I had to replace the camera as well because they are not compatible. I got my motherboard from Aliexpress, and it seems to be working fine. It came with some preinstalled software that was running Android 5.0.1. on PHE CSC which seems to be Spanish software. I flashed the latest Marshmallow 6.0.1. from Sammobile and its working great. But I wanted to flash Astra Dream UX ROM v.40F so I rooted the device, flashed TWRP and put the ROM on SD card, wiped everyhting (I have flashed roms before on my S4) and after successful installation, what happens is that phone constantly reboots after Samsung splash screen. It managed to get to boot animation first time after flashing, but after that, any Custom ROM that I flash installs without issues, but doesn't go further than Splash screen logo. I have tried 3 or 4 TWRP versions, but none of them seems to fix the issue. So I reflashed stock ROM using Odin and now its working fine. Any suggestion what might be the issue?
Click to expand...
Click to collapse
For some reason v4 of that rom won't boot for anyone without having to flash another kernel. Also, I've heard that dirty flashing over v3 works too, but I did the kernel change when I used it.
But I also flashed Nemesis N7 port v3.0 and Aurora Note 5 port v7.0, none of them booted. I used kernels provided with the ROMs.
As said previous, try to flash another kernel after flashing the ROM. You have ramkernel or flashpoint that I know of for custom ported roms.
Isaac_T said:
As said previous, try to flash another kernel after flashing the ROM. You have ramkernel or flashpoint that I know of for custom ported roms.
Click to expand...
Click to collapse
Thanks, I will try.