Related
I wanted to know if anyone had any good or bad experiences with clear cases like this one
http://www.amazon.com/AT-Fuze-Activ..._75?ie=UTF8&s=wireless&qid=1227055029&sr=1-75
I want to get a case that will protect the fuze from drops. I drop my previous phone the 8525 twice and because I'm in a city the first drop was on one of those metal grates and the phones edges got scratched up more than I would have liked and the second time was on a concrete side walk. Both times I was pulling out my phone from my case on my hip and lost grip. I was interested in getting a case that I can pull my phone from the top. That may help prevent me losing grip. But I still want to put something on the phone incase I loss grip again and drop the phone. And I was looking for something that will not put that much bulk or take away from the looks of the phone. If anyone has any suggestions or experence with cases or skins that I can put on the phone to try and protect it from a drop I would like to read about it
I had the boxwave clear case for my 8525, and it saved my phone several times. There were a couple problems though. For starters, the gaps between the plastic and the phone get covered in dirt, and you have to remove the case to clean it out. The case snaps on to your phone will little plastic tabs. If one of those breaks, part of your case will be loose.
However, I will certainly give the case full marks for protecting my phone. It survived drops, throws, smashes, and just about everything else you can imagine would happen if a 1 year old got a hold of your phone. So, if you don't really care about the phone getting dirty and whatnot, the boxwave case provides some good protection while adding a minimal amount of bulk to the phone.
I had a case similar for my HTC Tilt and I loved it, it saved my phone several times too and it has a belt clip which I loved! Also if you get that case they have it on eBay for cheaper... I believe it was $9.99 or something like that, I was looking earlier today and saw it on there but I bought a Hot Pink Rubberized one instead. But I like the cases, of course it's your own personal preference though. Hope I'm not too late with the eBay info though lol. Here's my search link, there are a couple cases for it.
http://cell-phones.shop.ebay.com/it...=m270.l1313&_odkw=htc+touch+pro&_osacat=20336
Search for the body glove case. It is rubberized, not the best looking of cases, but might protect it the best. I bought mine on ebay.
I bought the official AT&T 2-piece case for $29.99 (-30% FAN discount).
It fits, but tabs that hold it on make the phone seem like it's going to get stuck in a half open position.
I wanted to thank everyone for there suggestions.
NotATreoFan is this the case you bought at ATT
http://forum.xda-developers.com/showthread.php?t=446555
Because thats one of the options I was thinking of or the crystal case. I'm going to The ATT store to check it out.
How do you like your case?
Thanks
rrider77 said:
I wanted to thank everyone for there suggestions.
NotATreoFan is this the case you bought at ATT
http://forum.xda-developers.com/showthread.php?t=446555
Because thats one of the options I was thinking of or the crystal case. I'm going to The ATT store to check it out.
How do you like your case?
Thanks
Click to expand...
Click to collapse
That's the case.
$1.99 free shipping.
http://forum.xda-developers.com/showthread.php?t=450611
HTC Touch Pro Case Protection
For those of you who have a Touch Pro and have the Sprint included HTC brand case, you probably have the same gripe about it as I do. There is very little protection to the side of the phone as the OEM case has several gaps in it. Also using the case for a few weeks, the velcro begins to lose its hold and the case may not shut properly. I have customized my case to fix these problems and would encourage others to do the same. Here is what you will need:
-Small elastic material (available at any craft store or Wal-Mart!)
-3M double sided tape
-Velcro strips
-5 minute epoxy (Wal-Mart)
Directions: Cut a piece of elastic the same length as the open portion of the side of the case. Cut out small pieces of double sided tape and apply to the black cross sections of the case. Apply the elastic and cut to size. For the the velcro fix on the front of the phone, cut a strip of the velcro and fit to size on the front of the case. Mix the 5 minute epoxy and apply to the back of the velcro strip you just cut. Apply the velcro to the case and allow to dry (apply pressure to ensure a tight fit). Enjoy your case!
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
chibahawk said:
Anyone else buy and have problems with it? I searched around after thinking I saw a complaint on it like I've got but couldn't find.
Basicly, I put it on started noticing the top was putting pressure onto the screen I think. THe touch screen got extremely laggy, unresponsivess, and just seemed to go crazy. I'm going to try sanding it down on the inside but I think that just sucks.
On top of that the phone fell out of the back/belt clip half one night and caused a nice freakin dent in my phone and allowed the battery to flip out almost down a sewer.
Anyone care to give me a positive review so I don't just throw this thing out?
Also - is it possible to buy a new physical case to replace a scratched/dented case? Not the body glove I mean the actual phone casing.
Click to expand...
Click to collapse
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Praygo said:
I have this case and had the same problem. I have read that many others have had it too. Honestly I dont know why a company would put out a product like this. They all should be recalled, however me being me decided to just fix it by Taking a dremel tool and shaving some of the inside part of the screen protector off, making it put less pressure on the screen. It fixed it immediately. The case does a great job in protecting the phone, just a major flaw that can be fixed if you have the time and tools. If you dont, ***** to the company and get your money back and try something else.
Click to expand...
Click to collapse
Yes I could see that the inside casing was a bit rough so sanding should stop the problem - but seriously that's a major issue.
Have you found that it holds the phone well though? Because I'm very upset that my phone fell out of it once already but maybe it was an error on my part and it wasn't secure enough...
I've never had the phone fall out of the body glove case.
i mangled my body glove case.
someone bumped into me and the phone fell out of the case AGAIN.
i ripped it to shreds and left it on the side of the road to rot into plastic hell.
i dont recommend this product.
I returned mine. I had the exact same issues (screen and phone falling out). It also didn't attach properly on the top left corner, it was always bowed out. I don't recommend it either.
Anyone got any else to share?
I was THIS CLOSE ( || ) to buying it. lol
Is there anything out there that's similar to it in design, but better?
returned
When all the way snapped on, mine pushed the top left corner so hard the entire screen would not respond to touch. Returned it.
My friend and i had the same issue. We just took it off messed around with it and put it back and it works fine, SOMETIMES it happens again but we just take it off and put it on.
Since there is not any other case that provides this type of protection we are keeping it. I rather my phone be safe than anything else.
I just ordered mine yesterday so I'm anxiously awaiting its arrival.
What exactly did you have to mod to get it to work? According to my readings, you just need to sand down the edges that connect with the screen right?
I may just buy the case and sand down what was mentioned. I like the design of the case..only one so far I really like.
I've been using one for about two weeks and am very happy with it. Had read about the screen pressure issue on other posts (searching helps folks), and scraped down the top corners before I put it on. Don't need a dremel tool or sandpaper. No problems, fits perfectly. The only warning is that it's a little dicey to take off once it's on -- it really fits snugly.
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Torkrench said:
Yout're talking about the "sand texture" clip-on case, right? If so, yes, I bought the case too. The top cover was too tight and caused the screen issue people are mentioning. That was an easy fix by shaving down the edges that were pressing too hard (actually, I just cleaned off the coating from the plastic that was causing it... The bottom of the case however wouldn't fit at all. no matter what I tried, I couldn't get all of the clips to lock over the edges of the phone. I removed the felt lining and still had issues. I got around it by using thin double sided tape (for a temporary fix until I got a new case). I wouldn't trust the belt clip with the double stick tape though. I ordered the rubberized case on ebay and the fit is perfect. Just get that one. I sent an e-mail in to Body Glove and have had no response yet. We should all get our money back on these cases, or at least a redesigned bottom case that fits correctly. Right now it was just a complete waste of money. It's a shame, because I really liked the feel of the case.
Click to expand...
Click to collapse
Could you give us the link for the ebay one please!
http://cgi.ebay.com/NEW-RUBBERIZED-...5|66:2|65:12|39:1|240:1318|301:1|293:1|294:50
That is the one I ordered, and the fit is perfect. The only thing I wish it had was the belt clip insert for the case included. I don't know where to find one, but I mostly keep it in my pocket anyway.
you guys want a good case that protects? check out the monaco aluminum case, it comes with a clear lens on it which I haven't removed but you could if you wanted quick access to the touchscreen. I work in the construction field and have yet to have it fall off my clip. I also dropped my tilt (when I used it) from about 8" off a ladder and it was perfectly fine. The aluminum case for the fuze isn't any more bulky than the body glove case either.
bilbobrian said:
check out the monaco aluminum case
Click to expand...
Click to collapse
I've got one of these as well...and while it does protect the phone very well it will also lower your signal strength. I've had these type cases for the Wizard and Tilt and now the Fuze...whenever I'm in an area where the signal was a little iffy to begin with I WILL either drop the call or be unable to answer with the metal case. So, stay away from the aluminum ones if you go into lower coverage areas (and no...the slots they cut in the back to help improve the signal don't actually help.)
Can someone please tell me how to apply the screen protector that comes with the phone as it's just a large piece of clear plastic with no instructions how to physically attach it to the display!
It has a peel away backing which is much thinner than the protector.
I struggled to find how this attached when I got mine and have since put hair and smudges on the sticky backing. Can't wait for the new ones to come online mid May.
It's a sticker that you stick on the screen. How hard is this?!
Just put it on. Work cleanly though, be prepared and do it right the first time.
Bend the corner of the big part slightly and the two parts seperate
The part that goes onto the backing bit is what goes on screen
start from the top and smooth it down
As mentioned, work in a clean/dust free environment!
I've done it many times but even this time round, I got fluff inside - just one spec thinking as it was brand new out of the box, it wouldnt have anything on the screen and so I wouldnt need to clean it !
In removing the protector to clean it out... I ruined it
Got my new Brando one the other day which feels a bit more stronger and durable but still clear so I'll be putting that on later tonight
And now I have a air can with me too so if I get anything in the way, I can blow it out rather than trying to scrape it out
I've now put on the screen protector that came with the phone, but it feels a little thin and flimsy.
I'd like to know people's opinion of other aftermarket brands of protector for this phone as I'd like to get something a bit better quality.
Same thoughts here too
I ordered a pair from HTC direct but I think looking at them now that I have them, they are the same as the originals so I will probably not bother using them
I also have the Brando version now - Not opened yet but I will open and apply it to my phone tomorrow evening - just need a dust-free environment to test it
Apparently, Brando boast they have the best protectors so lets see
It does feel a lot stronger than the original
akash_84 said:
Same thoughts here too
I ordered a pair from HTC direct but I think looking at them now that I have them, they are the same as the originals so I will probably not bother using them
I also have the Brando version now - Not opened yet but I will open and apply it to my phone tomorrow evening - just need a dust-free environment to test it
Apparently, Brando boast they have the best protectors so lets see
It does feel a lot stronger than the original
Click to expand...
Click to collapse
Did you try this new Brando screen protector, and if so, is it any good?
Also, has anyone else had any experience of after-market screen protectors for this phone?
OK I applied mine today - sorry for the delay but I was just waiting for a time I could be patient !
I ordered it from HTCDirect as they are the only ones that had in stock
Recieved it promptly the next day so Kudos to them on that...also the guy I kept in touch with over email (Carlos if I remember correctly) was great and prompt in my queries.
My main query was - does it have the SAME fitment as the original bundled one.
As you know, the bundled one covers the entire screen including the slider for zoom and camera
The answer was Yes, it was exactly the same fitment.
So when I opened the pack, I was a bit annoyed as it was clearly NOT the same fitment! It's close however, but the top of the camera where on the HTC is all the way round with a small hole for the camera, the Brando one is in a U shape leaving the top bit of the camera open.
OK onto application
Just like all Brando protectors, it is protected by two covers on either end with clear instructions - pull one side BEFORE application and the other AFTER application
Once the dust was off the screen and the original protector...
I did just this - and after several attempts of lining it up - and I note, it is very EXACT in lining up. Slightly out and you will have more black on one side from the screen than the other.
Peeled it off, applied it and smoothed it out - the latter bit was hardly needed as the bubbles just vanished which was great.
At this state, the protector looked smoked a little and not as clear as the original one.
Once I was happy, I peeled the top part - noticed one bubble near the end where the label to peel was, smoothed it out and the protector was as clear as the original one.
First impressions:
It does feel MUCH more durable
It has a very slight and I mean SLIGHT smoked affect in that it is not 100% transparent as the original one but this shows how good it is potentially in strength.
Usage is fine, I can glide over it with my finger and stylus without any issues. The original was a finger print magnet but this seems to not stain with it which is great.
Now the downside....
I think HTCDirect sent me a slightly duff one. It has clearly got markings on the top (once the top layer was off) which look like impact marks.
It is very tiny - almost like what happens to a screen without a protector after 12months
I'm not too fussed but feel a bit cheated. Its no use removing it now as I would have no protector on it during the replacement stages - not to metion I would have to pay to ship back etc.
For now, I am ok with it but if it bugs me, I will throw it away and put the original one on (I ordered 2 extras from Clove who as usual, got it to me instantly, good communications and speed in delivery).
The clove one has no marks at all so thats an option.
Hope this answers some of your questions but to summarise your question
Is it stronger?
Yes it is
Is it worth it?
If you can get one mark free - yes it is
Benefits?
It's re-usable, stronger, washable, and I notice it does not let as much light reflect of it - something I had huge problems with in the sunlight with the original one where I could not see the screen - I am not exaggerating!
Downsides?
Where I got mine from, it has marks on it - something that might just force me to remove it and go back to the original one
Also the camera does not go in a O shape but rather a U shape
OK during the submit button, I realsed the marks and the U shape was bugging me too much
I knew it was a matter of time that gap in the U would get clogged up with dust that would eventually get stuck around the U bit
Removed it and applied the original one I bought from Clove... I have two so if it does wear down, I can replace it
I know from experiance that the original one in the box that I applied lasted fine up till now (a month now since I've had my TD2) so I dont doubt that it will be worn out - May not last as long as Brando's guarantee of it outlasting te device but that's fine given the price of the HTC ones.
Applied it without any dust getting trapped (the main reason I had to buy these and the brando one)
I found those marks were actually dust that was already stuck under the protective layer - whether this is HTCDirects fault or Brando during factory release - who knows but I think as a lesson, I'm staying away from both and sticking to the original stuff.
Hope you make the right decision either way - for now, a brando goes into the bin
akash_84 said:
Bend the corner of the big part slightly and the two parts seperate
The part that goes onto the backing bit is what goes on screen
start from the top and smooth it down
As mentioned, work in a clean/dust free environment!
I've done it many times but even this time round, I got fluff inside - just one spec thinking as it was brand new out of the box, it wouldnt have anything on the screen and so I wouldnt need to clean it !
In removing the protector to clean it out... I ruined it
Got my new Brando one the other day which feels a bit more stronger and durable but still clear so I'll be putting that on later tonight
And now I have a air can with me too so if I get anything in the way, I can blow it out rather than trying to scrape it out
Click to expand...
Click to collapse
damnit, didn't pay enough attention to dust & co...so after i saw that i catched a few dust pieces under it, i've tried to get them out manually - big mistake.
so trashed the original one and waiting for the new brando to put it on. being a former iphone-user, i must admit that the diamond2 screen is pretty sensible to scratches. i thought that i won't be needing any protection, but i already have a few small ones...so a screen protection is a must-have now.
Should have read this first
I should have read this thread before I tried to apply my screen protector. Straight away I had dust underneath the screen protector. Obviously I will now have to order some more protectors but will I be alright using my phone until they arrive? How delicate is the td2 screen?
You'll be fine using it while its there - just be annoying to see the dust specs!
I ordered a pair of the original ones in the end as I was not happy at all with the premium Brando one - the look, feel and visibility was terrible
Reason I ordered 2 of the original ones is I was hearing rumours before the unit was even released that the original HTC one was not durable and would need to be replaced after x amount of months - having had mine for 4-5 months now and with heavy usage, I can report back to say the first protector of the two is still on there - still very clean with no stylus/finger/nail marks and still as durable as it was when I put it first on.
arsenal84 said:
I should have read this thread before I tried to apply my screen protector. Straight away I had dust underneath the screen protector. Obviously I will now have to order some more protectors but will I be alright using my phone until they arrive? How delicate is the td2 screen?
Click to expand...
Click to collapse
From what other threads are saying the screen should be treated with care. Don't push it hard and avoid impacts. Don't stick the phone in your back pocket! Some people have experienced damaged screens even after a short time.
Shouldnt put any phone in your back pocket!
The number of phones I have to fix or write off because they have had severe pressure on them - ie: sitting on them has increased 5 fold recently.
And lets face it...the countries population are not getting any thinner/smaller!
eXelero said:
damnit, didn't pay enough attention to dust & co...so after i saw that i catched a few dust pieces under it, i've tried to get them out manually
Click to expand...
Click to collapse
I know it is not recommended. but I use a small drop of water on the screen before applying the screen, wiping the water as it is squeeze out. The water takes the dust with it.
Hi
I've applied mine that came with the Diamond 2 and after a few attempts you can't see it is there. Ironically I fits so well I almost want to put another screen protector on top of it so it doesn't become damaged and need replacing.
Anyway a tip. Working in a dust free environment is the key. A bathroom is a good place. I have a hepa air filter (for hayfever) and this removes dust really well so run that for a bit which helps.
With all the care in the world dust can get underneath, I had a few specs, and they tend to cause a small bubble as the screen screen protector can't fit flush. I found it very easy to remove them. Have some sticky tape handy, this can be used to lift up the screen protector from the corner. Lift it back up enough to get to the spec of dust, and using another piece of sticky tape dab the spec of dust off the sticky side of the protector, then lay it back down.
Regards
Phil
Hairs
Fru T Bunn said:
It has a peel away backing which is much thinner than the protector.
I struggled to find how this attached when I got mine and have since put hair and smudges on the sticky backing. Can't wait for the new ones to come online mid May.
Click to expand...
Click to collapse
I know what you mean I made an okay job of the one that came with it. The rubber case I bought of eBay came with one as well and made a right pigs ear of that. I think they need to be applied in a clean room
I've since bought some more off eBay so next time, I'm going to be a lot more careful!
Cheers, Rob.
I got 3 screen protectors with the original phone (2 of them as a gift). The first one was perfect except for a piece of fluff near the middle of the screen. I tried to remove it with a cloth(!!!) and ruined it. So I went for the second one, but at this stage the screen was not clean so I tried to use a microfibre cloth, which made it worse because it leaves even more fluff. I tried to fix it a few times and so now I have fluff inside, plus a bubble (the protector is a bit scratched) plus it doesn't stick properly on most of the sides and around the holes.
I am tempted to use the last one, but if I ruin it once more I am out of them. My biggest problem is how to clean the screen before sticking the protector. Will all the fluff come away when I remove the old protector? How can I clean the screen, knowing that the microfibre leaves fluff? Shall I blow with a can of compressed air?
I find magic tape is great for removing dust spots. Use the backing sheet to gently lift a corner then push the tape underneath to clean screen or protector as needed.
My favourite screen protectors are from Martin Fields. Really tough and easy to apply. Also, they are washable so if you do get a real dust problem you just take it off an run under the tap. Don't try that with the phone though...
Hey guys!I have had my baby for half an year now and it still amazes me what it can do...
I have a screen protector and the original pouch,but when it is in im having a hard time answering a call,so I've wondered what you keep your phones in?Do you put them in your pocket as is or do you atach them to your belt with a pouch or case or something.I dont know why but i have become attached to that peace of metaly plastic...i have kept it safe and it still awaits its first scratch...And just the tought of it scraching terrifies me
The question is pretty much-Does the official sleeve offer some kind of protection,if so what? And how many of you have stopped using it?Is a case for it necessary?
So um thats it pretty much.../discuss
i used the leather pouch and NO screen protector for the first 2 weeks after i purchased the HD2. the leather pouch is stylish and fits snugly but it quickly became impractical for me due to the reasons you have already mentioned. i would have to pull it out of my pocket, then pull it out of the pouch before i could even see who was calling, let alone answer it.
instead, i slapped on a screen protector. most HD2 screen protectors cover practically the ENTIRE FRONT of the device, except for the front buttons. i then put it in a silicon "case" that hugs and covers the rest of the device. essentially, ONLY the front buttons and front speaker grill, camera lens, camera flash, and back speaker grill are exposed to the elements. most silicon cases have sufficient cut outs for the connectors and microphone hole on the bottom edge of the device.
like i said, screen protector+silicon case gives me a device i can safely put in my pocket and have it ready to be used as soon as i pull it out my pocket.
some precautions: try to store the screen facing your thigh if you put your phone in your side pocket like i do. do not put keys and other rough/edgy items in your pocket along with the device, unless you like to tempt fate
bonus feature: i have looped a wrist strap through the cut outs at the bottom of the silicon case. this is handy because the HD2's body itself does NOT have any design element that allows for a wrist strap.
i've been using a brand new HD2 since june 2010 and so far it is in pristine condition, even the exposed front buttons look new.
Otter Box Defender. Best case and holster EVER.
So guys i have gotten a new problem...The proximity sensor doesnt seem to work...So as it is ringing in my pocket it manages somehow to reject/answer/send a message to the caller.It does work when i am in the process of talking while i put it on my ear...Otter than that it is much easier to work without the sleeve...Altough i would expose it to the elements...
Wallet phone!!
Only £3-ish and I love these... Only last 8 months or so before getting tatty, but that's fine. Buy two and by the time they are worn-out, you're ready for a new phone!
http://cgi.ebay.co.uk/Black-Leather..._MobilePhonesCasesPouches&hash=item255f5aef08
(This isn't the exact one I bought, but I couldn't find it today. Search this forum for HD2 wallet and you'll find an old review of mine somewhere)
Hi all!
A couple of weeks ago, my phone slipped from my laps. I was sitting in a couch and tried to reach the table with the phone resting outside my pants and the inclination of the body made it slip to the floor, hitting it on the side (left side if I remember well) and a bit inclined like this: /_ (the / is the phone and the _ is the floor ). The fall heigth was very low, like 40 cms.
The external glass break in a single line and the touch sensor doesn't work higher than that line
The weird thing is that the glass didn't broke directly when hitting the ground, it broke less than one minute later while using it (checking if it worked correctly). I sensed it in the hand while using the screen, so it seems that the glass got weakened and broke after a ver small amount of pressure.
In the store where I took it to be repaired they told me that Sony tends to put the touch sensor very close to the glass to improve the sensivity, making it very typical to break when the glass breaks like this.
I'm writing this to encourage you all to buy a case, because altough I don't like cases, I was planning to buy it just after the new year because the phone is too slippy, and it broke before that
I'm attaching a picture of the phone.
P.S: Remember that if the touch sensor breaks, you can always plug a USB mouse using a USB OTG adapter and reboot the phone, and at least you will be able to save everything
So pretty fragile it seems..
I can't remember how many times I dropped my sg note 4, and after every drop I was sure I'll buy a case (well I did) but the point is, now I realize how durable was this device...
My z5p is with front/back glass protectors + ugly tpu alum like case.. (Seems Sony and all case manufacturers can't find out how badly this device needs a pretty nexus 4 like boarder bumper)
Sorry to hear that, but as you say, your cautionary tale proves the benefits of having Tempered Glass screen protectors and a case. Not sure if the Tempered Glass would be good in that situation since your phone impacted at a sideways angle but always good to have fitted, just in case.
I typically always buy Glass screen protectors and wallet cases, the case serves a purpose and also adds some extra protection.
ifilgud said:
Hi all!
A couple of weeks ago, my phone slipped from my laps. I was sitting in a couch and tried to reach the table with the phone resting outside my pants and the inclination of the body made it slip to the floor, hitting it on the side (left side if I remember well) and a bit inclined like this: /_ (the / is the phone and the _ is the floor ). The fall heigth was very low, like 40 cms.
The external glass break in a single line and the touch sensor doesn't work higher than that line
The weird thing is that the glass didn't broke directly when hitting the ground, it broke less than one minute later while using it (checking if it worked correctly). I sensed it in the hand while using the screen, so it seems that the glass got weakened and broke after a ver small amount of pressure.
In the store where I took it to be repaired they told me that Sony tends to put the touch sensor very close to the glass to improve the sensivity, making it very typical to break when the glass breaks like this.
I'm writing this to encourage you all to buy a case, because altough I don't like cases, I was planning to buy it just after the new year because the phone is too slippy, and it broke before that
I'm attaching a picture of the phone.
P.S: Remember that if the touch sensor breaks, you can always plug a USB mouse using a USB OTG adapter and reboot the phone, and at least you will be able to save everything
Click to expand...
Click to collapse
Today it happened to me as well unfortunately. The phone slipped from my grip as I entered in my car. Just like yours, a line appeared and it ****ed up the touch sensor. Have you changed your display after that? If so, did you use the Sony service or some random repair shop?
asilviug said:
Today it happened to me as well unfortunately. The phone slipped from my grip as I entered in my car. Just like yours, a line appeared and it ****ed up the touch sensor. Have you changed your display after that? If so, did you use the Sony service or some random repair shop?
Click to expand...
Click to collapse
Hi!
Yesterday I forgot to answer, sorry.
I took it to the store where I bought it, which takes all the Z series directly to Sony official service because they do not have the ability to fix them.
It costs 200€ :s, but I wanted an official repair because it is still under warranty, and as it happened at Christmas and the phone was very new in the market, there were no other alternatives than taking it to the official service. The store didn't even have a pre-calculated price for this model, just up to Z3.
At least, as the accident happened in a friends house, his assurance company finally paid for the repair