[REQ] 32GB D802 .tot File - G2 Q&A, Help & Troubleshooting

As my other thread in the subforum shows, I am more or less bricked. But apparently .tot files are better than .kdz files so I am hoping they flash fine and not get stuck on 49% like the .kdz file.
Anyway, if anyone has it, please give me a link and save my phone from becoming a paperweight.
Thank you!

Related

[Q] [REQ] DLL for flashing D805 10B TOT file through LG Flash Tool 1.6 - Please help

Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilĂ , like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!

LG g2 d802 Horizontal lines

I have LG g2 d802 16 gb
UK 3 h3g variant...
My Display Panel type is Jdi
Issue is White Horizontal Lines
On some wallpapers
And certain graphics
&
Some videos
Tried Cloudy Patched Jdi kernel
After flashing this kernel display
Was acting weird
Like old vintage TV
Hardly Recovered from
Dead screen..
Screen wasn't waking up once I switched off the screen
Once I thought
My phone is dead
Or Bricked
But some how I've managed to restore
And I've tried panel swap zip
&
Whatever I could search on xda & google
Nothing is working for me
Guys please help me,,
I don't wanna sale this phone
Cause I love this phone
Guys please help me
kafeel said:
Guys please help me
Click to expand...
Click to collapse
When you said you restored, what exactly did you do? The best way to troubleshoot software issues is to flash stock firmware back with the kdz method. If it's a software problem that should fix it.
I've flashed kdz firmware
But issue is
These lines appears occasionally
As I mentioned
kafeel said:
I've flashed kdz firmware
But issue is
These lines appears occasionally
As I mentioned
Click to expand...
Click to collapse
Flash TOT & dll file by LG flash tool. Don't install autorec! I'm waiting your update!
But my phone doesn't need tot or dll file I gues
kafeel said:
But my phone doesn't need tot or dll file I gues
Click to expand...
Click to collapse
go to http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware and download BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G.zip, LGD802_20130912_LGFLASHv160.dll.zip. then set up lg flash tool, and search forum how to flash TOT, dll file. your phone data will be lost
Which kdz file should I flash along with this tot and dll files
And wil it solve issue are you sure
kafeel said:
Which kdz file should I flash along with this tot and dll files
And wil it solve issue are you sure
Click to expand...
Click to collapse
I don't know. try to flash TOT by LG flash tool. go to http://forum.xda-developers.com/showthread.php?t=2663369 and read careful. Flash TOT , your phone data will be deleted. KDZ, your data will be not deleted
Anyone please

Need help restoring to stock (D803)

A little background info on the phone.
Tried installing CloudyG2 3.3 but ended up bricking the phone. It was getting 6008 error with all the bad hdd partitions. I ended up using SRKTool to get the phone back to a somewhat bootable state. It still freezes on the LG logo but atleast now I can get into Download Mode.
I honestly have no idea what I am doing. I've downloaded a bunch of different LG Flash Tools (why is there so many variations) and I've downloaded a bunch of Rogers D803 kdz files. I also have one Rogers .tot file with a .dll.
I believe I have all the necessary files but when trying to use one of the LG Flashtools (non 2014 version?) I get Windows Errors. When trying to use the 2014 version of LG Flash Tool (choose CDMA, search for KDZ file) it gets stuck at 13% percent and goes nowhere.
The phone still detects CloudyG2 3.3 in Download Mode because when I started a flash it showed "Rootable" "Cloudy G2 3.3" at the bottom of the phone. I don't know if this is going to cause problems or not.
Any help would be appreciated!
See in the general section

VS995 KDz is out NO DLL

Does anyone know of a Universal DLL we can use to flash Our KDz posted 12-24-16 on LG
Ickyz said:
Does anyone know of a Universal DLL we can use to flash Our KDz posted 12-24-16 on LG
Click to expand...
Click to collapse
Do you need a dll with a KDZ? I thought the DLL was only needed for the .TOT files?
I thought so ....
I've never used it so good question
Ickyz said:
I thought so ....
I've never used it so good question
Click to expand...
Click to collapse
ah, Yeah I think KDZ's you use the LGUP tool which is descriped in another thread They don't appear to need a dll for the kdz. So I believe the dll is TOT only. I could be wrong as i'm not an expert on it, but I believe that's that process.
Has anyone successfully reflash there VS995 with this KDz yet?
Im not even trying to Root my 2nd Unit until I have all GOOD
Well I managed to Get LGUP running & it picked up my phone im still Stock no Root & it fail'd at 9% for tho those's who need to know, Maybe try flashing it more then once. I also ran into a problem with LGUP not finding my device so i had to copy & paste the common folder elsewhere
Yeah I ran into the same problem. 0x2000 error. CEFS:Initalize(). Terrible!
*edit*
Ran the uppercut method (link)and was able to flash the kdz on a stock non-rooted vs995! Just with a grain of salt, uppercut is recognized as a virus by some AV, but I took the risk and checked it out and it looks like it's just a false positive because it modify's another programs files in memory... so use at your own risk!
Thanks a million everyone, I finally fixed my Lg v20 vs995! I kept having failure trying it with Uppercut, but I finally saw that I needed to install 3 files to get it to work correctly, 1st you need the kdz file: VS99512A_06_1114_ARB00.kdz, next you need to install 2 driver files, LGUP_Store_Frame_Ver_1_14_3_3.msi and LGMobileDriver_WHQL_Ver_4.1.1.exe, and of course have UPPERCUT.exe. Finally after installing all of the correct drivers, and loading UPPERCUT, using the VS99512A_06_1114_ARB00.kdz, I finally got it to work and you have to choose "UPGRADE" in UPPERCUT, but I completely restored my phone to factory!!! What a frickn blessling, I am so happy, because I was trying for days to fix this..... and I actually threw this phone in the trash, hehehehehe, but something made be take it out of the trash an hour later, THANK GOD!
Link to the KDZ for vs995?
can anyone please direct me to the KDZ for VS995?

Really need a stock LG-H345 (t-mobile) KDZ file; can't find anything online?

My LG Leon (H345) is in a bootloop, I'm able to get into download mode, I just need a KDZ file to flash to it. I've looked online for days now, and every link I find that seems should work just leads me to a blank white page? No download?? Websites that people say will get you any LG KDZ file also don't work and have no content in them. Not sure what to do at this point; would anyone happen to have a KDZ file for this phone? Any version of the firmware should work; I just want to get it working again.
marshmila said:
My LG Leon (H345) is in a bootloop, I'm able to get into download mode, I just need a KDZ file to flash to it. I've looked online for days now, and every link I find that seems should work just leads me to a blank white page? No download?? Websites that people say will get you any LG KDZ file also don't work and have no content in them. Not sure what to do at this point; would anyone happen to have a KDZ file for this phone? Any version of the firmware should work; I just want to get it working again.
Click to expand...
Click to collapse
Try this:
http://lg-kdz-firmware.com/
Here is the latest version:
https://mega.nz/#!Dx0zVCDY!cDJf9xUPiEV0biGf5x9_VLFYfgSqhmlqoO8P1Ub7rq4
Thanks pal. :fingers-crossed::fingers-crossed::fingers-crossed:
Link not working ...............
https://www.mylgphones.com/t-mobile-lg-leon-h345-software-update-h34510k.html

Categories

Resources