Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!
I have LG g2 d802 16 gb
UK 3 h3g variant...
My Display Panel type is Jdi
Issue is White Horizontal Lines
On some wallpapers
And certain graphics
&
Some videos
Tried Cloudy Patched Jdi kernel
After flashing this kernel display
Was acting weird
Like old vintage TV
Hardly Recovered from
Dead screen..
Screen wasn't waking up once I switched off the screen
Once I thought
My phone is dead
Or Bricked
But some how I've managed to restore
And I've tried panel swap zip
&
Whatever I could search on xda & google
Nothing is working for me
Guys please help me,,
I don't wanna sale this phone
Cause I love this phone
Guys please help me
kafeel said:
Guys please help me
Click to expand...
Click to collapse
When you said you restored, what exactly did you do? The best way to troubleshoot software issues is to flash stock firmware back with the kdz method. If it's a software problem that should fix it.
I've flashed kdz firmware
But issue is
These lines appears occasionally
As I mentioned
kafeel said:
I've flashed kdz firmware
But issue is
These lines appears occasionally
As I mentioned
Click to expand...
Click to collapse
Flash TOT & dll file by LG flash tool. Don't install autorec! I'm waiting your update!
But my phone doesn't need tot or dll file I gues
kafeel said:
But my phone doesn't need tot or dll file I gues
Click to expand...
Click to collapse
go to http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware and download BIN_LGD802AT-00-V10b-EUR-XX-SEP-07-2013-16G.zip, LGD802_20130912_LGFLASHv160.dll.zip. then set up lg flash tool, and search forum how to flash TOT, dll file. your phone data will be lost
Which kdz file should I flash along with this tot and dll files
And wil it solve issue are you sure
kafeel said:
Which kdz file should I flash along with this tot and dll files
And wil it solve issue are you sure
Click to expand...
Click to collapse
I don't know. try to flash TOT by LG flash tool. go to http://forum.xda-developers.com/showthread.php?t=2663369 and read careful. Flash TOT , your phone data will be deleted. KDZ, your data will be not deleted
Anyone please
As you read. After a whole day of searching non-stop from day 'til night, I finally give up and ask for help.
I've tried to flash a Lollipop ROM, which resulted in my LG G2 D800 having a soft brick.
I already had this issue once, so I knew what I had to do. I used a Kitkat 20c TOT package to return to Stock Kitkat. However, I kept recieving an error;
Device Model Unknown, Check Model or DLL. Or something similar. Upon my first search, I found out about the custom DLL.
So I tried it. But I get another error; CrossDL [Unknown] to [D800]. I tried 3 different DLL files, modified the TOT file (Hex Editor paste write)
I also ended up flashing some img files I don't remember which post it was exactly, but it was from here.
My device no longer boots up, it gives me, however, the option to either reboot or go directly to download mode once I power it on.
Please note; before and after the img flashing. I kept having the same issue.
So in short, I have no idea of how to flash the tot file because it keeps giving me a Device Model error. It there truly a way for the LG FLash tool (1.8.1 I think) to simply ignore what model it is before flashing?
Also, I tried this on another computer, but no luck, same result. I'm doing this on my PC with a Virtual Machine (I run Linux Mint as a Main OS) so I'm truly unsure if it's that, though the first time I did it when I first had the issue, it worked just fine...
Any ideas, suggetions?
Edit :: Another reason why I'm posting this is because a lot, if not all people with a D800 with this issue, their posts are either ignored or discontinued. So if I get this fixed, I'll make sure to specify how I did.
bump?
buump?
lordsolrac2 said:
buump?
Click to expand...
Click to collapse
Did you flash that g4 port ROM you were looking at? That wasn't for the d800.
Art Vanderlay said:
Did you flash that g4 port ROM you were looking at? That wasn't for the d800.
Click to expand...
Click to collapse
I actually flashed This ROM
The first time I had this issue, it was because, I flashed CloudyG2 3.3.
Both the D800 Variants of the ROMs
It seems the issue is that I didn't have the kitkat bootloader (though, my device has Kitkat by default, so, why does it have this issue?)
LGUP will not refurbish my phone. when i try to restore i have to use upgrade and i want to refurbish but LGUP gives error and says
kdz file does not support refurbish process. i had a v10 once and had no problem restoring kdz on v10 has lg change kdz files so that you cant do a full re flash here is pics please help and does has any one else have this problem. thanks and hope someone could please help.
I believe this post would go better in the Questions and Answers section of the V20 forums: https://forum.xda-developers.com/v20/help
Jimhackthorn said:
LGUP will not refurbish my phone. when i try to restore i have to use upgrade and i want to refurbish but LGUP gives error and says
kdz file does not support refurbish process. i had a v10 once and had no problem restoring kdz on v10 has lg change kdz files so that you cant do a full re flash here is pics please help and does has any one else have this problem. thanks and hope someone could please help.
Click to expand...
Click to collapse
Why do you want refurbished? Isn't just flashing kdz or upgrading make the phone stock?.... I read somewhere the refurbished option doesn't work but maybe since that post I read about 2 months ago things have changed.
i have the same experience when i upgraded from 10i to 10j, error for refurbish, don't know why as i downloaded kdz file from the same source before
I too want to refurbish. I want to REPLACE every file on the phone instead of comparing it and replace only selected once.
The reason why i want to do it is because i get different apps preinstalled when i upgrade. It means process is not consistent.
NOt to mention i am having all sorts of problems with root. Its rooted but system apps are not removable while every other root function works.
Some apps also fail to read CDMA cells. Every time i flash using UPGRADE method, i get more weirdness layered on top of previous one.
THATS WHY
I soft bricked the phone and now can only get into download mode. The phone only has two partitions and I was hoping that flashing a KDZ would fix this.
I'm running Linux Mint on my machine and using SALT an LG type open source program in order to flash.
Question: I heard that I should flash something before the Dec 2017 security patch. I can't find any KDZ files unfortunately and was hoping someone here would have a server I could pull it from.
onedeathbyflame said:
I soft bricked the phone and now can only get into download mode. The phone only has two partitions and I was hoping that flashing a KDZ would fix this.
I'm running Linux Mint on my machine and using SALT an LG type open source program in order to flash.
Question: I heard that I should flash something before the Dec 2017 security patch. I can't find any KDZ files unfortunately and was hoping someone here would have a server I could pull it from.
Click to expand...
Click to collapse
dear atleast mention model number , variant of lg v20.
anyhow, https://lg-firmwares.com/ , here you can find kdz of all lg models
hahmad78 said:
dear atleast mention model number , variant of lg v20.
anyhow, https://lg-firmwares.com/ , here you can find kdz of all lg models
Click to expand...
Click to collapse
Oh goodness I'm so terribly sorry I seem to have over looked it.
It's an LGV20 H910
What happened is that I used a ROM that was for another model and it kept crashing. After some time I started tinkering with some other software before I realized that even though I bought the device as a 996 I got the 910 version from the eBay seller.
In any case I remember someone mentioning that if I'm going to flash a stock kernel I should stick to something that was before the DEC 2017 security patch so that I can keep the exploit that enables ROM flashing.
Not sure if that's referring to the bootloader that I'll have to flash or the stock ROM itself.
Oh and lastly I remember someone mentioning that the KDZ for my variant of V20 doesn't have any stock images so I'll have to take one from another model flash it to boot then root it and flash a custom bootloader and then re-flash a custom ROM.
That's probably not how it's suppose to work but it's roughly what I remember.
onedeathbyflame said:
Oh and lastly I remember someone mentioning that the KDZ for my variant of V20 doesn't have any stock images so I'll have to take one from another model flash it to boot then root it and flash a custom bootloader and then re-flash a custom ROM.
That's probably not how it's suppose to work but it's roughly what I remember.
Click to expand...
Click to collapse
dear what is the condition of your mobile now? does lg up detect the mobile? if so than use LG UP patched version and try to flash your stock kdz.
hahmad78 said:
dear what is the condition of your mobile now? does lg up detect the mobile? if so than use LG UP patched version and try to flash your stock kdz.
Click to expand...
Click to collapse
Sorry darling that it took so long to reply!
My phone is detected by SALT (the open source program developed by steadfasterX) BUT it is doesn't want to work with LGup on a windows system because I don't have the proper .dll to work with my model type.
The LGup log file says
"LGUP can't load the model."
funny enough though the log file shows the model type right after a hex key string.
It says "LG-US996.. US99610d..."
I can get the phone into download mode but the phone doesn't have any partitions right now. So for now it's a paper weight.
onedeathbyflame said:
Sorry darling that it took so long to reply!
My phone is detected by SALT (the open source program developed by steadfasterX) BUT it is doesn't want to work with LGup on a windows system because I don't have the proper .dll to work with my model type.
The LGup log file says
"LGUP can't load the model."
funny enough though the log file shows the model type right after a hex key string.
It says "LG-US996.. US99610d..."
I can get the phone into download mode but the phone doesn't have any partitions right now. So for now it's a paper weight.
Click to expand...
Click to collapse
every kdz has dll file, even lg up has dll file. you can extract kdz and get dll for your specific model.
use lg up patched version, search on xda, it will solve your problem.
i can not help on linux and SALT, as i dont have these. if you have access to windows machine, than i can try to sort problem for you.