hello friends..
im curretly having a hard time on this.. im using galaxy y, and i want to install cyanogen mod 7.2,
but my volume keys are not working. so i can't boot on recovery mode, and download mode.
and my phone is not rooted yet. :crying:
jamespopoy said:
hello friends..
im curretly having a hard time on this.. im using galaxy y, and i want to install cyanogen mod 7.2,
but my volume keys are not working. so i can't boot on recovery mode, and download mode.
and my phone is not rooted yet. :crying:
Click to expand...
Click to collapse
I guess your volume keys are damaged.Go to the service center for repairing the phone.
you can try the following but make sure to have a backups as im not responsible for any data loss or phones blowing up
deodex your rom if its not already deodexed - you can find guides on this by searching
install samsung usb drivers on your pc
root your phone via your pc - you can try using this
now download root explorer via playstore
download system app installer via playstore
download quickpanelsettings.apk
download my status bar from http://d-h.st/k1H
unzip my statusbar and copy contents to sd
install quickpannelsettings.apk with system app installer
with the root browser copy lidroid-res.apk to system/framework
set permission of file to rw-r-r
with the root brower copy SystemUI-apk to system/app replacing the file currently there (you may get force closes now just carry on)
set perrmission of file to rw-r-r
now restart your phone
once restarted you should have a new status bar
pull down the status bar and swipe the toggle icons left and the last but one toggle is restart
press that and you will have the option to reboot into recovery mode (download mode doesnt work on galaxy y via this method)
This will only work on stock based roms
if you want to return to stock rom flash stock rom via odin
you can put your phone into download mode by using a usb jig if your buttons do not work
Its best to get your keys repaired if you can though
marcussmith2626 said:
you can try the following but make sure to have a backups as im not responsible for any data loss or phones blowing up
deodex your rom if its not already deodexed - you can find guides on this by searching
install samsung usb drivers on your pc
root your phone via your pc - you can try using this
now download root explorer via playstore
download system app installer via playstore
download quickpanelsettings.apk
download my status bar from http://d-h.st/k1H
unzip my statusbar and copy contents to sd
install quickpannelsettings.apk with system app installer
with the root browser copy lidroid-res.apk to system/framework
set permission of file to rw-r-r
with the root brower copy SystemUI-apk to system/app replacing the file currently there (you may get force closes now just carry on)
set perrmission of file to rw-r-r
now restart your phone
once restarted you should have a new status bar
pull down the status bar and swipe the toggle icons left and the last but one toggle is restart
press that and you will have the option to reboot into recovery mode (download mode doesnt work on galaxy y via this method)
This will only work on stock based roms
if you want to return to stock rom flash stock rom via odin
you can put your phone into download mode by using a usb jig if your buttons do not work
Its best to get your keys repaired if you can though
Click to expand...
Click to collapse
how can use rescue root bro?
jamespopoy said:
hello friends..
im curretly having a hard time on this.. im using galaxy y, and i want to install cyanogen mod 7.2,
but my volume keys are not working. so i can't boot on recovery mode, and download mode.
and my phone is not rooted yet. :crying:
Click to expand...
Click to collapse
Ok first root ur phone from computer itself. Check for it....
Then install rom manager from playstore and reboot recovery from it.
---------- Post added at 12:04 PM ---------- Previous post was at 11:36 AM ----------
jamespopoy said:
hello friends..
im curretly having a hard time on this.. im using galaxy y, and i want to install cyanogen mod 7.2,
but my volume keys are not working. so i can't boot on recovery mode, and download mode.
and my phone is not rooted yet. :crying:
Click to expand...
Click to collapse
Dude its better u get it repaired. Coz even if you do enter recovery, u need volume keys to navigate.... Unless you have touch recovery.
But to install touch recovery too u need to enter normal one. So volume buttons are must !
jamespopoy said:
how can use rescue root bro?
Click to expand...
Click to collapse
Not used it before - any root method via pc should work
tony_stark_noob said:
Dude its better u get it repaired. Coz even if you do enter recovery, u need volume keys to navigate.... Unless you have touch recovery.
But to install touch recovery too u need to enter normal one. So volume buttons are must !
Click to expand...
Click to collapse
good point - totally forgot about that!
you will need to get your phone repaired if you want to use recovery
Well, if you have damaged Volume keys then you will be able to go to recovery but you will not be able to navigate in menus.
You can use rebooter app from play store(free) or use adb shell reboot recovery.
But to use recovery you will have to get your volume keys repaired (there is not any touch recovery for sgy yet)
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands
another Method
I had the same problem because on my Galaxy Y the Volume Up key is also broken. Repairing is no option because it is simply not worth the
money (no warranty left). Here is a solution:
First you have to disassemble the phone until you get to the Volume keys. (Only 4 screws to remove) Here you can test them if they are really
broken. If they are you have to remove them completely. This is no problem because they don't work and if you would like to repair these they
need to be exchanged. Don't do this if you have any warranty left, you will loose it!! They are only soldered with
two points and you can easily remove them by slightly moving them forth and back until they break. Now you can use the volume key with every
piece of metal just by touching the two solder points left on the phone.
Starting in reboot mode via ADB you can now use the volume keys with the opened phone to do what ever you want.
It's clear that you take these steps on your own risk, for me it worked great, I'm now on a custom rom with a lot better user experience.
Related
i tried to replace the original file with a new one but i have this message "error " or " system restricted " .
Do you have the phone rooted? If not, http://forum.xda-developers.com/showthread.php?t=1044765
It worked for me on B138 rom.
It is not necessary to root the phone for this. Is the device mounted with read and write? If you do only have the permissions to read you cannot delete the file of course. Which OS do you have?
im using androzip to move the file .
Wait, what? You want to replace the file for the recovery-mode, right? You need to do this on a computer, you cannot do this on your phone. Start up your handset while holding vol+ and vol- at the same time. You will get a coloured screen and on the computer you can replace the file.
XphX said:
Wait, what? You want to replace the file for the recovery-mode, right? You need to do this on a computer, you cannot do this on your phone. Start up your handset while holding vol+ and vol- at the same time. You will get a coloured screen and on the computer you can replace the file.
Click to expand...
Click to collapse
Of course he can do it on his x5, but this way needs root.
Sent from my Huawei u8800 using XDA App
XphX said:
Wait, what? You want to replace the file for the recovery-mode, right? You need to do this on a computer, you cannot do this on your phone. Start up your handset while holding vol+ and vol- at the same time. You will get a coloured screen and on the computer you can replace the file.
Click to expand...
Click to collapse
i did it !! but i cant do step 4 below i just get the same pink screen then nothing happened
1. Important: If your handset does not come with a sd-card you need to install one. Otherwise you cannot install a custom ROM.
2. Install this. You just need to replace one file (backup the old one on your computer before overwriting).
3. Download a zipfile containing the ROM you want to install and place it onto your sd-card. Do not unzip it.
4. Start the phone while holding the vol+-button, you will then boot into the recovery mode you installed in step 2.
5. I saved the install-instructions in case I forget them:
levibuko said:
Of course he can do it on his x5, but this way needs root
Click to expand...
Click to collapse
Ah alright.
The instruction is a bit misleading. Do only press the vol+ button, that will boot into recovery. Did you install the recovery from here, by the way? That is the newest.
XphX said:
Ah alright.
The instruction is a bit misleading. Do only press the vol+ button, that will boot into recovery. Did you install the recovery from here, by the way? That is the newest.
Click to expand...
Click to collapse
I did it , thanks for your help . finally i can turn off orientation lock .
by the way , how i can get the US market with paid apps ??
Well if you browse the Market with an american IP-adress (VPN/Proxy) you should be good to go. But I don't know, maybe you run into other problems then. I have not tried this out...
i heard that there is a hacked version or maybe i have to root the phone to get this market .now i can get only free apps cuz i am not from US or a country that support this type of market .
hi 2 all
I want to brief how made brick my tab step by step
first of all i had an Acer_A500_4.010.43_COM_GEN1 3.1 stock rom on my tab that i upgrade it to 3.2 Acer_A500_7.006.01_COM_GEN1 by tablet then i decided to root my tablet for installation custom rom and i downgrade to 3.01 rom by this typic http://forum.xda-developers.com/showthread.php?t=1276227 method 1 i reverted successfully and after rooting i installed and tested this 3 roms (taboonay 2.2-thor 14.2&light speed 1.07) but each one had some problems like google map or gps or rotation screen so i installed a 3.1hc stock rom Acer_A500_4.010.41_COM_GEN1 and rooted that worked good but i had mistake and i forget erase update.zip file from my sd card
4days ago Mistakenly I turn on my tablet with recovery mode and iconia automattically gone to update mode (rom installation) i did nothing but this opration was stopped at 80% and my wrong was here i could not be patient and shut down my tab by power button and i bricked my tablet
after that i test all method for unbrick it like not stable rom , Chinese and whitout Chinese roms using of stock rom like Acer_A500_4.010.38_COM_GEN1
without any success only in not stable rom processes gone to 95 % and then stoped and nothing
after update to chinese rom it stopped at 30 % with yellow triangle sign
and then happend something bad and i loose my CWM
NOW if i want to go to recovery mode by pressing power+vol down keys Iconia show me a message
secure boot: image SOS checksum fail!
and in normal booting I have a locked black screen with nonworking touchables button and android word at left top of screen and clock & 15% battery sometimes it show a message for shutting down
i cant go to setting menu for active my usb debugging and my pc do not recognize my tablet
i cant hard reset my tab because it hanged in 2 message for 30 mins and i cant go to recovery mode and customer services says your device is out of warranty because rotting that
but Fortunately I have my UID
excuse me for long story
any body help me please
thank all of you
that is amazing over 150 visit of this help request without any answer please give me a Proposal
thanks
I have a501 .....
http://forum.xda-developers.com/showthread.php?t=1419164
the chinese rom and checksum error are supposed to happen.
the chines rom is an old unstable version but is provided so we can root it to install cwm and flash a working rom.
after the checksum error you needed to power off and then using the buttons enter recovery mode and go to 'Fix checksum error' in advanced menu - after that reboot.
you should do the following:
a)go back and read the entire post on what to do because you missed the last part
or
b)try the backdoor method
---------- Post added at 12:21 PM ---------- Previous post was at 11:49 AM ----------
just read your entire post again...there's alot going on there isnt there?
have you tried flashing the update.zip again with 3.0.1 on it...get back to the chinese rom, from there install iconia root and root it. Then install cwm and you should be all good - if that doesnt work then use timmyDeans backdoor method it does it for you, all you need to do is install acer recovery installer to install cwm, backup the original stock recovery when the app asks you, you will need it to OTA Update successfully...
Doesn't flashing stock rom remove cwm?
bendystrawboy said:
Doesn't flashing stock rom remove cwm?
Click to expand...
Click to collapse
yeh i just had trouble when i OTA'd last nite on the 2nd update, had to flash stock before it would install, but i may have restored the wrong one from acer recovery installer beforehand...a definite possibility!!!
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
darvis said:
by flashing from method 1 my racovery mode came back again and i can recover only from update.zip
but when i want to install Extract_unBrick_UPDATE it stop at 30% and my tab goes to turn off and when i press power button it turnnig on and turn off very soon and can not boot
I test non stable rom and flash with this rom proccess goes to 90% and stop
what can i do now? this is my tablet screen
http://s1.picofile.com/file/7237922040/Photo_0007.jpg
http://s2.picofile.com/file/7237923010/Photo_0008.jpg
http://s1.picofile.com/file/7237924301/Photo_0009.jpg
thank u
Click to expand...
Click to collapse
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
timmyDean said:
Unbrick it using my tool listed here, guarantee you it will fix your problems.
Just download it and follow the instructions in the readme.pdf.
http://forum.xda-developers.com/showpost.php?p=20680452&postcount=137
Click to expand...
Click to collapse
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
darvis said:
hello master
i am so glad for your attention to my problem
i use from your rom before that pictures are shown above and my tablet show ((pass)) and pc show congratulation to me but u see nothing change but Hopefully that fix my cvm problem an now ican use from update.zip rom but my screen didn't any change and i cant do anything by tablet
I don't know anything about backdoor method is it useful for my problem ?
i have 2 problems
1-i cant wipe and erase my whole data even when i press vol+ and power keys and toggle lock screen button it shown two message for erasing cash but it do anything
2-my PC don't recognize my tablet i have to flash your rom with APX mode
i have a question do your rom need to CUPID file ? because there isn't any cupid file in your Rom
please help me sir because you are a greet master
thanks
Click to expand...
Click to collapse
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
timmyDean said:
V3 which I pointed you to is STOCK 3.2.1 with root. Once you get there you will be stable. If you want CWM then you will have to install it. It is NOT in the flash because the flash is stock ONLY with root. But since you have root, you can install CWM.
The serial number does NOT need to be saved in any file. Just follow the instructions.
Click to expand...
Click to collapse
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
darvis said:
sorry sir
I used your v3 rom and install it by apx mode it installed and I saw ((pass)) on my tablet after botting and after acer logo and android word i have same problem yet
http://s1.picofile.com/file/7238522040/Photo_0010.jpg
http://s2.picofile.com/file/7238522903/Photo_0011.jpg
http://s1.picofile.com/file/7238523331/Photo_0012.jpg
however thank you very much for your attention
sincerely yours
Click to expand...
Click to collapse
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
timmyDean said:
Ok, now just download the stock image for your country and put it on your external sdcard. Use the power and volume + key which will launch stock recovery (which you now have flashed) and it will flash your tablet with the one located on your sdcard. This will have you back stock.
Click to expand...
Click to collapse
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
darvis said:
sorry sir
what did you mean about power and volume + key?
do you mean power and vol down keys for recovery mode?
Click to expand...
Click to collapse
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Moscow Desire said:
You have a "volume" switch on top of your tab (long silver switch on left side)
You control volume from this. Vol+ make sound go up (the right side of it)
Press it on the left side, and volume goes quiet (vol-)
So, as he said, with the tablet OFF, hold the VOL+ side of the button, then select PWR (power)
You have 2 recovery modes.
1. CWM Recovery (vol- & Pwr) (after you have root and cwm installed)
2. Stock Acer recovery (vol+ & Pwr)
thanks a lot
Step number 2 with the stock acer recovery, should install the stock rom you copied to your sd like TimmyDean said earlier.
Click to expand...
Click to collapse
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
darvis said:
thank u sir
but there is a question
1-in CWM recovery we can use from Update.zip files
but in Stock Acer recovery (vol+&power ) which one of files must be copied at sd card ?
Click to expand...
Click to collapse
Answer me please
darvis said:
Answer me please
Click to expand...
Click to collapse
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
timmyDean said:
Please rewrite what you are trying to do. I have no idea what you are talking about?
Are you asking about stock recovery and flashing form a SD Card? If so, copy update.zip to your SD card and then run recovery. If you have CWM, then use it to select the update from the SD Card.
It's not clearly as to exactly what you have loaded and what you are trying to do?
LASTLY: You cannot take a backup from CWM and have the stock recovery install it. Stock recovery will only install update.zip which must be signed by ACER.
TD
Click to expand...
Click to collapse
Hello sir
in upper post u tell me i must go to recover mode by pressing power & vol+
but only i can go to stock recovery with pressing power & vol-(not vol+)
is there any other method for going to recovery mode by (vol+) ?
because Mr Moscow Desire said in his upper post (post no 14 of this thread)
if yes how ?
if not ..... just thank u
there is only one recovery on your device..
you should slowly repost your exact trouble.. then do EXACTLY as someone tell you to fix it..
There is only one recovery on your device . If YOU FLASH CWM RECOVERY .. it overrides the acer recovery.
so if you dont have cwm revovery .
nevermind repost your system rom you are using .. rather or not you know what recovery you have .. Then someone can help you...
LOST BLONDE BABE I AM .. GIGGLES
gOOD LUCK..
Sorry you're having difficulty.
Please go here and download the is tool http://forum.xda-developers.com/showthread.php?t=1307539
Do EXACTLY what it says to do in the PDF
Hi there,
sooo, i have this really annoying problem with my samsung galaxy s plus. Home button just doesnt work I have to put it on varanty, but i have rooted it and i have installed CM9 by acro with his version of CWM. and there where problem start. Home button is used to "accept" on CWM and i cant restore it to stock rom i can just move around with vol + and -. is there any other option, like connet to pc or whatever else?
Have you tried the power button instead of the home button? This works on my i9000.
You can flash using Odin.
Yes i tried power button, just dont select by this one :<
@dark_knight35 flash what? offical rom? but thers something wrong with download mode. first of all i need to use combination which contains home button second when i use option "restart" in cm9 there is possibility to enter download mode, buuuuuuut when i do i see icon of download mode for few seconds and then its turning off :<
EDIT: i found similar problem guy has with sgs and custon ICS he just went back and reset to factory settings. I tried and guess what, now i cant even enter recovery mode.... -.- everything besides home button, recovery and download mode however is working
AFAIK you can use ADB to get into DL mode, but I'm not sure.
woah, hold ur horses.. less acronims please i didnt get anything from post u just wrote.
EDIT: well now my phone is totally bricked, and i see only black screen of death :< but i found this broodplank.net/old/flashsamsungi9001.php and i try to repair it. strange but i can access download mode by pressing home but+ vol up +power so home works........
niziol_pl said:
woah, hold ur horses.. less acronims please i didnt get anything from post u just wrote.
EDIT: well now my phone is totally bricked, and i see only black screen of death :< but i found this broodplank.net/old/flashsamsungi9001.php and i try to repair it. strange but i can access download mode by pressing home but+ vol up +power so home works........
Click to expand...
Click to collapse
xD it works again. You just had bad luck and the flash of your last ROM broke it.
To install a zip do this from terminal emulator:
echo "boot-recovery" > /cache/recovery/command
Then...
echo "--update_package=/path/to/zip" >> /cache/recovery/command
reboot recovery
This will automatically install, just like ROM manager would.
Sent from my GT-I9000 using xda premium
soooo i finally unbricked my phone, by crashing cm9 completly then flashing fearecoverymod and then by restoring from my backup and voila i have my stock rom back home button worked back at the morning but now is dead again so i unrooted my phone and i'm going to put it on varanty. thx for ur input mates. :highfive:
HI
I have the i9505 samsung s4.
I managed to root it via odin, and flashed the Team win recovery as part of the process. I downloaded root checker and it shows that the device is rooted.
However, when i turn the device off and then try and boot to the custom recover I am finding it impossible.
I hold the volume down, home key then press the power button and keep them pressed. THe phone keeps going to the odin download mode and no further etc. However, I can get to the custom recovery via rom manager. What am i doing wrong??
Using rom manager is fine, however if something goes wrong during a custom rom flash then i will need to use the buttons to boot to custom recovery
Please help
Manny
mannysroot said:
HI
I have the i9505 samsung s4.
I managed to root it via odin, and flashed the Team win recovery as part of the process. I downloaded root checker and it shows that the device is rooted.
However, when i turn the device off and then try and boot to the custom recover I am finding it impossible.
I hold the volume down, home key then press the power button and keep them pressed. THe phone keeps going to the odin download mode and no further etc. However, I can get to the custom recovery via rom manager. What am i doing wrong??
Using rom manager is fine, however if something goes wrong during a custom rom flash then i will need to use the buttons to boot to custom recovery
Please help
Manny
Click to expand...
Click to collapse
Try to turn off your phone manually press and hold power+volumeUp When you see the rebooting recovery on top of your screen (blue) let go of your fingers mate
Sent from Hell ?
Repulsa said:
Try to turn off your phone manually press and hold power+volumeUp When you see the rebooting recovery on top of your screen (blue) let go of your fingers mate
Sent from Hell ?
Click to expand...
Click to collapse
Hi that's what I did but I don't see a blue logo at any point ... Just goes straight to the Odin download screen. Strange that I can get to recovery via Rom manager
mannysroot said:
Hi that's what I did but I don't see a blue logo at any point ... Just goes straight to the Odin download screen. Strange that I can get to recovery via Rom manager
Click to expand...
Click to collapse
Try to flash philz recovery via odin then try to boot into recovery and when it goes fine try to flash the custom recovery you want.
Sent from Hell ?
Repulsa said:
Try to flash philz recovery via odin then try to boot into recovery and when it goes fine try to flash the custom recovery you want.
Sent from Hell ?
Click to expand...
Click to collapse
Tried that and still no difference can boot to the philz recovery from the power options of phone but not using the buttons. Is there something within the phones options I need to enable or disable ?
mannysroot said:
Tried that and still no difference can boot to the philz recovery from the power options of phone but not using the buttons. Is there something within the phones options I need to enable or disable ?
Click to expand...
Click to collapse
If you flash Philz recovery you can boot only when you turn off your phone and by Hold and pressing Power+Volumeup . Im Guessing your asking the Extended Power menu Option by Pressing Power and choose restart > There should be Reboot Option IE Reboot,Recovery,Downloadmode. Mate is your phone rooted? If you want an Extended power menu option try to install WannamXposed , and Enable it from there, Make sure to follow hes Tutorial. Have a nice day.
Repulsa said:
If you flash Philz recovery you can boot only when you turn off your phone and by Hold and pressing Power+Volumeup . Im Guessing your asking the Extended Power menu Option by Pressing Power and choose restart > There should be Reboot Option IE Reboot,Recovery,Downloadmode. Mate is your phone rooted? If you want an Extended power menu option try to install WannamXposed , and Enable it from there, Make sure to follow hes Tutorial. Have a nice day.
Click to expand...
Click to collapse
hi it is the same with both custom and stock rom. I am now running paranoid 4.4.2.
The issue is that I need an option to get to recovery using the buttons. There is no issues getting to recovery from the power menu once the phone is running
It is really annoying me now
Thanks
Hi
For the beginning i want to say thx to the people who will try help me.
Samsung Note 3 SM-9005
Rom: NB3 4.4.2 (kitkat)
I should post it as a reply to the chainfire's post on cf auto root but i can't cause i am a new on xda (and he didn't allow me )
So what is my problem ?
When i tried root with CF all is ok but when odin say 'PASS' there is no recovery boot (the install process, the red android logo)
What i have ? > After my flash my phone try to boot (with Se Enforcing + 2 other stuff blue red and yellow i guess) but my phone can't boot (yes even boot) he only reset and try re-booting.
chainfire's say
*NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.*
Click to expand...
Click to collapse
So i tried it, i unchecked the auto-boot, flash my phone pull the battery and press the button (without the battery), and after my phone turn off.
When i turn on >> same issue boot loop all time
And to have access on the phone i must go on the downlaod mode and click restard phone...
Well if u could help me .... 90% of my app require root x) :laugh:
Is this the file you used? There's 2 files, one for 4.4 and the other for 4.3. Try flashing the file again.
Yes i used this file
i forgot to say that kingo root is so buged i mean i try also to root with him (on 1s)
He put my phone on download, install the recovery ect
Result: a fake root, in fact even if i have SuperSU (he installed) He said me that i have no binnary installed
I also checked on "Root Checked" no root here
BUT on download mode: custom os + custom binnary
And his chinese recovery work
1 hour ago i used my GN2 to see if maybe it's my computed who have issue with kingo root
Result: Root perfectly my phone
I also forgot to say that i used different odin (1.85,3.09 ect) on admin
And i tried the NA6's rom (maybe was the rom ^^' but nop still no root)
French's user said:
Hi
So i tried it, i unchecked the auto-boot, flash my phone pull the battery and press the button (without the battery), and after my phone turn off.
When i turn on >> same issue boot loop all time
And to have access on the phone i must go on the downlaod mode and click restard phone...
Well if u could help me .... 90% of my app require root x) :laugh:
Click to expand...
Click to collapse
I re-read your reply and I'm a little confused. Did you pressed all buttons after removing the battery? Also, there is no restart phone in download mode, you can only get out of download mode by pressing power button for a few seconds or remove the battery.
Lastly, maybe check you have the correct samsung usb drivers and reactivation lock is off.
hey_joe said:
I re-read your reply and I'm a little confused. Did you pressed all buttons after removing the battery? Also, there is no restart phone in download mode, you can only get out of download mode by pressing power button for a few seconds or remove the battery.
Lastly, maybe check you have the correct samsung usb drivers and reactivation lock is off.
Click to expand...
Click to collapse
Well i know but i didn't even really understand the process to manually boot the recovery (the chainfire's quote)
what i did ? i flash my phone when odin say "reset" i just pull the battery on the table and next press buttons (Volup+home+power)
My phone turn off i replace the battery and i get the booting loop
Maybe my way to process is wrong, i don't even know chainfire don't really explain in details the way to do it....
For the driver i deleted all and re-installed by kingo but in fact all time my device is detected (in all mode) and COM if alway here (also the flash is correct)
I think maybe my process is badly done (maybe i can't understand cause im french)
Here's how I would normally do it.
- download the file and extract to a folder/location of choice
- put phone in download mode by pressing power + vol down + home button all at the same time until something comes up on the screen then let go of the buttons then press vol up then connect to usb on pc
- go to where you extracted the downloaded file, open odin and put the tar.md5 file in the PDA slot and click start
Odin will flash file and automatically restart to apply root ( red android with red letters ) then restart again to android.
OMG dude that work thx to you :laugh::laugh::laugh::laugh::laugh::laugh:
Ok the last post i mean i didn't understand the process of the boot recovery manually (with autoboot unchecked)
But i least this time i used a different thing- what ?- A nokia usb cable
And this time that work and im sure before i did all u said to me.
I worked on 2 night x)x)
Anyway dude thx to help me
No problem.
Enjoy your phone :good: