Database Users

[Q] hardware keys not working after CM9 flash

Guys I encountered a problem after flashing joker's 0.3.0 CM9 build today. Right after flashing that update from 0.2.0, I immediately noticed that my usual red Motorola bootscreen is missing. Instead the menu whenever we want to enter CWM by holding the power button + volume down button came up. My CWM was missing thus i couldn't flash anything (i later found out it was missing and reinstalled it). My screen calibration was off. It was as if everything shifted like 20 pixels down for example whenever I type Q the A button gets triggered, Z button gets triggered instead of A, and so on and finally my hardware keys are no longer functional. Instead they are being replaced by the last row of the keyboard which is spacebar, the puctuation keys etc. I have tried going back to 0.2.0, factory resetting, hardware factory resetting, reflashing faux's 1.3ghz kernal and nothing seems to be working. Please help me guys! Any advice is greatly appreciated!!

It could be the pds partition has gotten messed up. That's what I gather from what you have told. Google pds partition fix, download the pds fix that's most appropriate for the android version you are running.
Sent from my MB860 using xda premium

Thank you so much! Although my Red motorola bootscreen is still missing at least i got my hardware keys fixed

[Q] cm10-20130110-nightly Home button and notifications are not working?!

Hi,
i installed the new cm10-20130110-nightly and realised that the home button is not working and that the notifications are not working. Someone with a similar/same problem or does someone have a solution to this.
I would be really thankfull
Greets Max
Ps: MB562 is the device

Both works for me
green lense mb525
cm10 nightly (fixed kernel)

OKey got it fixed, had to wipe data/factory reset but now its working good

[Q] Picture ok and camera fail PROBLEM SOLVE

I wanted to ask an information everything works fine but I noticed that the room in REC mode monitor remains with the picture freez and after a while he says reg. Videos fails and exits the rec mode with a 0.0 I tried to do a full wipe and a re install the rom but nothing has changed please could you give me some advice ... ps the camera works fine. there are solution or is a harware problem, i have test many roms
thanks

dualline said:
I wanted to ask an information everything works fine but I noticed that the room in REC mode monitor remains with the picture freez and after a while he says reg. Videos fails and exits the rec mode with a 0.0 I tried to do a full wipe and a re install the rom but nothing has changed please could you give me some advice ... ps the camera works fine. there are solution or is a harware problem, i have test many roms
thanks
Click to expand...
Click to collapse
When this happened to me, i did a full wipe and re-installed the ROM and it fixed the issue.. if this doesn't work, change ROMS.. i doubt it's a hardware issue

obtuce said:
When this happened to me, i did a full wipe and re-installed the ROM and it fixed the issue.. if this doesn't work, change ROMS.. i doubt it's a hardware issue
Click to expand...
Click to collapse
I solved the problem by reinstalling the version of the non-HLOS for the modem installed on my notes 3 ​​unfortunately I ran the download mode through the Power menu in my rom and the installation process went well although it might seem in fact it was not, only turning off the terminal and then launching the download mode mode with the buttons vol. bt down + power + home are finally able to solve this problem ... thanks a lot

Meizu MX4 Home button stopped working

Yes My meizu mx4 home button started to not working..I tryed to reset reboot also ınstall firmware again but no luck! First reboot did the trick and it worked little bit and after it stopped forever! When i push to home button area it push like one step up. ( i didnt tryed to install firmware with clear data option) but some of people also tryed that and it didnt effect something.. Any1 with same problem or found a solution ?

eltdesign said:
Yes My meizu mx4 home button started to not working..I tryed to reset reboot also ınstall firmware again but no luck! First reboot did the trick and it worked little bit and after it stopped forever! When i push to home button area it push like one step up. ( i didnt tryed to install firmware with clear data option) but some of people also tryed that and it didnt effect something.. Any1 with same problem or found a solution ?
Click to expand...
Click to collapse
I and many others have the same problem. So far the only known fix is to replace the digitizer.
This is a well known problem with the hardware which Meizu are trying to avoid by saying there's a software fix just around the corner. Something they have been telling us for months now. There's a thread about this on meizufans.eu
Upgrading the firmware sometimes fixes the problem for a few hours or even days, but the problem always returns.
Best fix would be a different phone (maybe the MX4 Pro?)

Poco M3 jumping and vibrating screen problem

Hi,
I have a problem with my new Poco M3. When I enter an app (example Chrome, Aliexpress, Gmail) the screen randomly starts to bounce and shake. Example In the Chrome everything works fine, but sometimes the screen starts shake and freeze. I updated everything, firmware is the latest, but the problem has not disappeared. I tried HW Overlay disable, it didn't help.
This is a bug in the system? If I standing on the desktop everything works fine. I think it isn't hardware problem.

That doesn't happen to my M3, could it be hardware problem with the touchscreen?

cbw said:
That doesn't happen to my M3, could it be hardware problem with the touchscreen?
Click to expand...
Click to collapse
It do just in applications. I think it isn't hardware problem, because it occurs randomly when I enter an application or i scroll the page down in the Chrome. The app is crashing and if when I exit the application it recovers. Menu and system, full screen games are working perfectly. It’s like the screen resolution is bouncing or as if I turned the notch on/off many times very quickly.

Video from the problem

Keput said:
Video from the problem
Click to expand...
Click to collapse
If it is a software problem, what you can try is:
1. Do a factory reset.
2. Install the latest version of recovery ROM manually in MIUI updater (after enabling the hidden menu by tapping the big 12 logo at the middle ten times).
3. Unlock the bootloader, and re-install the ROM using Mi Flash with a fastboot ROM package.

cbw said:
If it is a software problem, what you can try is:
1. Do a factory reset.
2. Install the latest version of recovery ROM manually in MIUI updater (after enabling the hidden menu by tapping the big 12 logo at the middle ten times).
3. Unlock the bootloader, and re-install the ROM using Mi Flash with a fastboot ROM package.
Click to expand...
Click to collapse
I tried a factory reset and do the same. I tried a lot of firmware and do the same.
I haven't tried with the fastboot ROM package. What is the difference between the fastboot and the recovery ROM methode? Is it possible if it does not working with the recovery ROM, it will work with fastboot ROM?

Keput said:
Is it possible if it does not working with the recovery ROM, it will work with fastboot ROM?
Click to expand...
Click to collapse
It is possible if it's a software problem, but you won't know until you have tried it.
And if there is a Mi service center near you, it's better to bring the phone to them to be repaired under warranty.