Hi,
I have a problem with my new Poco M3. When I enter an app (example Chrome, Aliexpress, Gmail) the screen randomly starts to bounce and shake. Example In the Chrome everything works fine, but sometimes the screen starts shake and freeze. I updated everything, firmware is the latest, but the problem has not disappeared. I tried HW Overlay disable, it didn't help.
This is a bug in the system? If I standing on the desktop everything works fine. I think it isn't hardware problem.
That doesn't happen to my M3, could it be hardware problem with the touchscreen?
cbw said:
That doesn't happen to my M3, could it be hardware problem with the touchscreen?
Click to expand...
Click to collapse
It do just in applications. I think it isn't hardware problem, because it occurs randomly when I enter an application or i scroll the page down in the Chrome. The app is crashing and if when I exit the application it recovers. Menu and system, full screen games are working perfectly. It’s like the screen resolution is bouncing or as if I turned the notch on/off many times very quickly.
Video from the problem
Keput said:
Video from the problem
Click to expand...
Click to collapse
If it is a software problem, what you can try is:
1. Do a factory reset.
2. Install the latest version of recovery ROM manually in MIUI updater (after enabling the hidden menu by tapping the big 12 logo at the middle ten times).
3. Unlock the bootloader, and re-install the ROM using Mi Flash with a fastboot ROM package.
cbw said:
If it is a software problem, what you can try is:
1. Do a factory reset.
2. Install the latest version of recovery ROM manually in MIUI updater (after enabling the hidden menu by tapping the big 12 logo at the middle ten times).
3. Unlock the bootloader, and re-install the ROM using Mi Flash with a fastboot ROM package.
Click to expand...
Click to collapse
I tried a factory reset and do the same. I tried a lot of firmware and do the same.
I haven't tried with the fastboot ROM package. What is the difference between the fastboot and the recovery ROM methode? Is it possible if it does not working with the recovery ROM, it will work with fastboot ROM?
Keput said:
Is it possible if it does not working with the recovery ROM, it will work with fastboot ROM?
Click to expand...
Click to collapse
It is possible if it's a software problem, but you won't know until you have tried it.
And if there is a Mi service center near you, it's better to bring the phone to them to be repaired under warranty.
Related
So I have some problems with my OPT.
As soon as the system has completely booted the screen remains dark. Before this (boot animation, recovery, fastboot) the screen works fine.
I already tried all methods from Oneplus Two - Solution for Hard Bricked Device more than once but the problem could not be solved.
Current state: USB debugging disabled, oem unlock disabled. Fastboot and recovery work.
I flashed 2.2.0 full via stock recovery, then I wiped data and cache.
After booting I can see the language selection like the phone comes fresh out of the box but as soon as I try to select the language the screen turns black again. I can go back to language selection by pressing the back softkey and then the power button. When doing this the screen turns on again.
How can I make it work again?
Try flashing the Hydrogen OS.
Tried it but it the issues is still the same apart from the fact that it boots Hydrgen OS instead of OOS.
swaggyboy said:
Tried it but it the issues is still the same apart from the fact that it boots Hydrgen OS instead of OOS.
Click to expand...
Click to collapse
Is it a New mobile?
I had a remote service with oneplus today. They basically did the same like in the Oneplus Two - Solution for Hard Bricked Device thread and it did not change anything.
So it must be a hardware issue and I will let it be repaiered.
swaggyboy said:
I had a remote service with oneplus today. They basically did the same like in the Oneplus Two - Solution for Hard Bricked Device thread and it did not change anything.
So it must be a hardware issue and I will let it be repaiered.
Click to expand...
Click to collapse
How did you manage to meet up with the technician?
skarfy said:
How did you manage to meet up with the technician?
Click to expand...
Click to collapse
I opened a ticket and explained my problem. Then they offered me the remote service.
i have very strange problem with my note 3, screen goes black suddenly and hardware keys works but no display. but i can access download mode and recovery.
plz help (Sorry for my bad english)
ajzarizvi said:
i have very strange problem with my note 3, screen goes black suddenly and hardware keys works but no display. but i can access download mode and recovery.
plz help (Sorry for my bad english)
Click to expand...
Click to collapse
I see no other choice than factory reset.
factory reset not helping tried several times
ajzarizvi said:
factory reset not helping tried several times
Click to expand...
Click to collapse
Factory reset and then flash stock original firmware with Odin
Wich rom do you have ???
Because i had a same problem with a Stock-Custom rom...
Use a another rom it will be better.
I Recommand you the CM13 RR it is very stable with this kernel PurifyK.-hlte-v1.2.6 ( you must flash it ).
iliakastrioti said:
Wich rom do you have ???
Because i had a same problem with a Stock-Custom rom...
Use a another rom it will be better.
I Recommand you the CM13 RR it is very stable with this kernel PurifyK.-hlte-v1.2.6 ( you must flash it ).
Click to expand...
Click to collapse
im on stock 5.1 rom tried CM13 RR same thing happens screen goes black after some time .
After some time that's hardware .
ajzarizvi said:
i have very strange problem with my note 3, screen goes black suddenly and hardware keys works but no display. but i can access download mode and recovery.
plz help (Sorry for my bad english)
Click to expand...
Click to collapse
Same thing here, i was using CM 14.1, suddenly my phone reboot and start rebooting in a loop, just "Samsung Galaxy Note3" appeared.
I flashed Stock ROM, but now i get Samsung Galaxy Note3 logo, but after that, system starts ok, all buttons works, touchscreen works, but no image, only black screen.
I can enter download mode and it shows image, but i have the same problem when i enter recovery, it works everything, but no image.
Any help?
my mi a1 phone stuck in android one logo...how to overcome this...need urgent help...thanks....please help
press the power button until you get a reboot. This may give a full & complete reboot to the main screen
berlin51 said:
press the power button until you get a reboot. This may give a full & complete reboot to the main screen
Click to expand...
Click to collapse
tried to hold the power button, but same things happening...actually when pressing the power button in 1st page below MI logo "unlocked" showing and in next page android one logo stucks
The next thing to try is to press -vol and power to go into fastboot mode. Then once in fb mode press the power button for a while to exit fastboot & reboot to the main screen.
berlin51 said:
The next thing to try is to press -vol and power to go into fastboot mode. Then once in fb mode press the power button for a while to exit fastboot & reboot to the main screen.
Click to expand...
Click to collapse
no bro....same problem....can't go further....same stuck at android one page....have to go to service centre:fingers-crossed::crying:
Tell us more. What did you do before?
pharix said:
Tell us more. What did you do before?
Click to expand...
Click to collapse
Tried to install gcam once. But couldn't installed it. then after not tried. But today while seeing youtube phone suddenly restarts and stucks in android one logo
any solution for this stuck problem ?
i read somewhere about extracting something from the Stock ROM
sevensaints said:
any solution for this stuck problem ?
i read somewhere about extracting something from the Stock ROM
Click to expand...
Click to collapse
Why are u not flash new fastboot rom using mi flash tool!
sahu.trilochan said:
my mi a1 phone stuck in android one logo...how to overcome this...need urgent help...thanks....please help
Click to expand...
Click to collapse
Did you manage to solve it ?
or you just reflash it over new rom ?
Same issue with my Mi A1 that is not even a month old, I was reading a news page when all of a sudden it stopped responding. I tried to do a hard shutdown but when it rebooted the phone is now stuck in the Mi/AndroidOne logo.
I cant get into the menu to perform a factory reset, when I try to go into the bios menu by pressing and holding power+volume up, the phone just restarts and gets stuck in the Mi/AndroidOne logo again.
I will try to flash the rom and see if that help, although I have been unable to locate the stock rom for the Mi A1 therefore I will be flashing it with Android 8.0.0 Oreo (OPR1.170623.026.V.9.5.10.0.ODHMIFA)
This is the link to the steps I will be following:
xiaomifirmware.com/roms/download-official-roms-xiaomi-mi-a1
I will update to let you guys now if it work, in the mean time if anyone has a different method to fix this I would appreciate the info.
I too have Android one logo issue
Hello sir,
Recently my internal storage got almost full ,it flashed repeated warnings that "some system functions may go wrong,please freeup some space".I just did not paid much attention to it and proceeded to download a file when my internal storage level was less than 100 mb and then suddenly my phone got switched off.when I tried to switch it on it got stuck in the middle with Android one logo .please help me to solve this problem as I don't to lose my data.
My Xiami Mi A1 running latest July 2018 patch of Oreo just started getting stuck also. I'm rooted and running Magisk.
Applying the July OTA update is the only thing unusual I've done recently. But that was about 10 days ago.
I rebooted one day just for good practice, and the phone showed the unlocked bootloader warning and then got stuck on the Android One screen. I left it for like 10 minutes, and absolutely nothing. I tried booting into fastboot (Volume Down & Power) and then reboot again. The only good news is I managed to keep trying to reboot, reboot into fastboot, boot again. Finally, I got a dead android robot looking icon and something like "no command found". I rebooted again, and everything was great.
Now, I've just tried a reboot again (a couple days later), and same **#^#! again... stuck on the Android One logo screen.
How can I figure out and actually repair this?
Note: I can still use fastboot to boot into TWRP and see all my files.
dadnammit said:
My Xiami Mi A1 running latest July 2018 patch of Oreo just started getting stuck also. I'm rooted and running Magisk.
Click to expand...
Click to collapse
If you are using Magisk 16.0 update to 16.7 beta.
sipollo said:
If you are using Magisk 16.0 update to 16.7 beta.
Click to expand...
Click to collapse
I am in fact on 16.0. Is this a known issue?!
In the meantime, just booting in and out of Fastboot over and over eventually seems to work. :/
dadnammit said:
I am in fact on 16.0. Is this a known issue?!
In the meantime, just booting in and out of Fastboot over and over eventually seems to work. :/
Click to expand...
Click to collapse
Yes, it's a known bug. Magisk 16.6-16.7 beta work better.
sipollo said:
Yes, it's a known bug. Magisk 16.6-16.7 beta work better.
Click to expand...
Click to collapse
If I'm currently running Magisk 16, can I safely flash 16.7 over it?
KalolParty said:
If I'm currently running Magisk 16, can I safely flash 16.7 over it?
Click to expand...
Click to collapse
Yes, you can update from Magisk Manager or flash .zip in twrp without problems.
sipollo said:
Yes, you can update from Magisk Manager or flash .zip in twrp without problems.
Click to expand...
Click to collapse
I am running Magisk Manager 5.7.0 because it is the last version to support OTA updates properly.
And I can't update Magisk before updating Magisk Manager (if I try to do it within Magisk Manager). So I will flash the .zip.
dadnammit said:
I am running Magisk Manager 5.7.0 because it is the last version to support OTA updates properly.
And I can't update Magisk before updating Magisk Manager (if I try to do it within Magisk Manager). So I will flash the .zip.
Click to expand...
Click to collapse
Last zip includes Magisk Manager too.
Hello people!
I need help, I have no idea what happened with my MI A1.
The problem is: ROM Stock, and whatever I put in my phone doesn't work. he gets to the home screen, but there are several errors, for example: He starts to lock in some parts, and the message "Interf Sist stopped" appears on the screen and then restarts, the camera does not work, the notification bar sometimes does not go down, and when that happens it hangs.
I really need your help not without anything else to do.
Thank you all!
Pj1159 said:
Hello people!
I need help, I have no idea what happened with my MI A1.
The problem is: ROM Stock, and whatever I put in my phone doesn't work. he gets to the home screen, but there are several errors, for example: He starts to lock in some parts, and the message "Interf Sist stopped" appears on the screen and then restarts, the camera does not work, the notification bar sometimes does not go down, and when that happens it hangs.
I really need your help not without anything else to do.
Thank you all!
Click to expand...
Click to collapse
Good news is: your device is, most probably, not soft, let alone (very) hard bricked.
If you are willing to consider factory reset (and reinstall) you can try so from system (factory reset), recovery (factory reset) or fastboot (fastboot -w). If that does not help you may need to flash stock ROM again.
Dior DNA said:
Good news is: your device is, most probably, not soft, let alone (very) hard bricked.
If you are willing to consider factory reset (and reinstall) you can try so from system (factory reset), recovery (factory reset) or fastboot (fastboot -w). If that does not help you may need to flash stock ROM again.
Click to expand...
Click to collapse
Hello Dior! The problem is that I have already performed all possible resets and the same error continues, already installed the stock rom and with it, even the device has a greater number of failures. I am currently using the Pixel Experience 9.0 ROM (very good), it is working fine, but the network signal does not work, the phone application crashes, the "Interf Sist is not working" error appears less frequently.
Pj1159 said:
Hello Dior! The problem is that I have already performed all possible resets and the same error continues, already installed the stock rom and with it, even the device has a greater number of failures. I am currently using the Pixel Experience 9.0 ROM (very good), it is working fine, but the network signal does not work, the phone application crashes, the "Interf Sist is not working" error appears less frequently.
Click to expand...
Click to collapse
Sorry to hear about your trouble, maybe it helps to flash the most recent stock firmware on top of your custom ROM https://forum.xda-developers.com/showpost.php?p=81207525&postcount=568...
Hi
RP2, GSI roms (I tried three: LOS 17, NitrogenOS, RevenageOS), arter97-kernel-r12, Magisk-v20.3
I am installing a GSI ROM, the system is working. after the third or more reboot, the phone is booted to a black black screen.
Wipe all data, phone booted.
doing something simple (install software from google play,restore data from old device via google restore)
restart
phone booting to blank black screen with sound. computer (USB) recognized the phone.
Tried with Magisk, withour Magisk, restored vendor.img from origin (I was deleted the two apks for BT).
clear data
phone booted
restore
blank again
where to start debug it ?
Same problem with me, I had my phone on phhusson treble ROM (android 10) then went back stock and hated it....tried to flash the phhusson treble ROM again and she boots but to a black screen, you can hear via sound it's up just the screen is black....let me know if ya finger anything out
DaveyBoy2002 said:
Same problem with me, I had my phone on phhusson treble ROM (android 10) then went back stock and hated it....tried to flash the phhusson treble ROM again and she boots but to a black screen, you can hear via sound it's up just the screen is black....let me know if ya finger anything out
Click to expand...
Click to collapse
did you tried Android 9 ROMS or this is only 10 problem?
I was rooted and installed Magisk on the stock, I hate the stock like you but it works.
Haven't tried a android 9, I'm back at work and used 4gb of data screwing around yesterday trying to get things fixed so I gotta go easy today ?
moshe_lm said:
Hi
RP2, GSI roms (I tried three: LOS 17, NitrogenOS, RevenageOS), arter97-kernel-r12, Magisk-v20.3
I am installing a GSI ROM, the system is working. after the third or more reboot, the phone is booted to a black black screen.
Wipe all data, phone booted.
doing something simple (install software from google play,restore data from old device via google restore)
restart
phone booting to blank black screen with sound. computer (USB) recognized the phone.
Tried with Magisk, withour Magisk, restored vendor.img from origin (I was deleted the two apks for BT).
clear data
phone booted
restore
blank again
where to start debug it ?
Click to expand...
Click to collapse
Yea I've had the same results as well.
Try Havoc and PE from these links. They are phhusson based and work with some bugs but at least you can boot up after the third time
https://sourceforge.net/projects/expressluke-gsis/files/
moshe_lm said:
did you tried Android 9 ROMS or this is only 10 problem?
I was rooted and installed Magisk on the stock, I hate the stock like you but it works.
Click to expand...
Click to collapse
SO! got home from work, flashed the rom that i was having issues with (phhusson's android 10 build) BAM, booted just fine, did the whole big restore thing, figured this was going TOO well so i figured i better test a restart.....and BAM black screen, lock sounds, everything just nothing on the screen. so I volume down & powered till it reboot....and the screen is back!.. so why does it need this? idk but atleast it gets me workin with android 10 again!
DaveyBoy2002 said:
SO! got home from work, flashed the rom that i was having issues with (phhusson's android 10 build) BAM, booted just fine, did the whole big restore thing, figured this was going TOO well so i figured i better test a restart.....and BAM black screen, lock sounds, everything just nothing on the screen. so I volume down & powered till it reboot....and the screen is back!.. so why does it need this? idk but atleast it gets me workin with android 10 again!
Click to expand...
Click to collapse
It is working after second restart ? or one time ?
moshe_lm said:
It is working after second restart ? or one time ?
Click to expand...
Click to collapse
If you want/need to restart if you do it via the power button then hitting restart, it will boot to a black screen. But if you hold the power and volume down till it reboots, it'll boot perfectly. Happens every time for me
DaveyBoy2002 said:
If you want/need to restart if you do it via the power button then hitting restart, it will boot to a black screen. But if you hold the power and volume down till it reboots, it'll boot perfectly. Happens every time for me
Click to expand...
Click to collapse
volume down isn't go to fastboot mode ?
moshe_lm said:
volume down isn't go to fastboot mode ?
Click to expand...
Click to collapse
Not if you let go when you see the screen turn off, then it's just a dirty restart I guess?
In my case, it only happens when you use the Encrypt password to start the device.
So I suggest skipping the encrypt part on startup setting and the problem should gone.
*Sorry for my bad English.
In my case, Don't use the "Secure start-up" thing when you set up your phone in Android 10.
Nor It will mess and cause a black screen on your device.