my mi a1 phone stuck in android one logo...how to overcome this...need urgent help...thanks....please help
press the power button until you get a reboot. This may give a full & complete reboot to the main screen
berlin51 said:
press the power button until you get a reboot. This may give a full & complete reboot to the main screen
Click to expand...
Click to collapse
tried to hold the power button, but same things happening...actually when pressing the power button in 1st page below MI logo "unlocked" showing and in next page android one logo stucks
The next thing to try is to press -vol and power to go into fastboot mode. Then once in fb mode press the power button for a while to exit fastboot & reboot to the main screen.
berlin51 said:
The next thing to try is to press -vol and power to go into fastboot mode. Then once in fb mode press the power button for a while to exit fastboot & reboot to the main screen.
Click to expand...
Click to collapse
no bro....same problem....can't go further....same stuck at android one page....have to go to service centre:fingers-crossed::crying:
Tell us more. What did you do before?
pharix said:
Tell us more. What did you do before?
Click to expand...
Click to collapse
Tried to install gcam once. But couldn't installed it. then after not tried. But today while seeing youtube phone suddenly restarts and stucks in android one logo
any solution for this stuck problem ?
i read somewhere about extracting something from the Stock ROM
sevensaints said:
any solution for this stuck problem ?
i read somewhere about extracting something from the Stock ROM
Click to expand...
Click to collapse
Why are u not flash new fastboot rom using mi flash tool!
sahu.trilochan said:
my mi a1 phone stuck in android one logo...how to overcome this...need urgent help...thanks....please help
Click to expand...
Click to collapse
Did you manage to solve it ?
or you just reflash it over new rom ?
Same issue with my Mi A1 that is not even a month old, I was reading a news page when all of a sudden it stopped responding. I tried to do a hard shutdown but when it rebooted the phone is now stuck in the Mi/AndroidOne logo.
I cant get into the menu to perform a factory reset, when I try to go into the bios menu by pressing and holding power+volume up, the phone just restarts and gets stuck in the Mi/AndroidOne logo again.
I will try to flash the rom and see if that help, although I have been unable to locate the stock rom for the Mi A1 therefore I will be flashing it with Android 8.0.0 Oreo (OPR1.170623.026.V.9.5.10.0.ODHMIFA)
This is the link to the steps I will be following:
xiaomifirmware.com/roms/download-official-roms-xiaomi-mi-a1
I will update to let you guys now if it work, in the mean time if anyone has a different method to fix this I would appreciate the info.
I too have Android one logo issue
Hello sir,
Recently my internal storage got almost full ,it flashed repeated warnings that "some system functions may go wrong,please freeup some space".I just did not paid much attention to it and proceeded to download a file when my internal storage level was less than 100 mb and then suddenly my phone got switched off.when I tried to switch it on it got stuck in the middle with Android one logo .please help me to solve this problem as I don't to lose my data.
My Xiami Mi A1 running latest July 2018 patch of Oreo just started getting stuck also. I'm rooted and running Magisk.
Applying the July OTA update is the only thing unusual I've done recently. But that was about 10 days ago.
I rebooted one day just for good practice, and the phone showed the unlocked bootloader warning and then got stuck on the Android One screen. I left it for like 10 minutes, and absolutely nothing. I tried booting into fastboot (Volume Down & Power) and then reboot again. The only good news is I managed to keep trying to reboot, reboot into fastboot, boot again. Finally, I got a dead android robot looking icon and something like "no command found". I rebooted again, and everything was great.
Now, I've just tried a reboot again (a couple days later), and same **#^#! again... stuck on the Android One logo screen.
How can I figure out and actually repair this?
Note: I can still use fastboot to boot into TWRP and see all my files.
dadnammit said:
My Xiami Mi A1 running latest July 2018 patch of Oreo just started getting stuck also. I'm rooted and running Magisk.
Click to expand...
Click to collapse
If you are using Magisk 16.0 update to 16.7 beta.
sipollo said:
If you are using Magisk 16.0 update to 16.7 beta.
Click to expand...
Click to collapse
I am in fact on 16.0. Is this a known issue?!
In the meantime, just booting in and out of Fastboot over and over eventually seems to work. :/
dadnammit said:
I am in fact on 16.0. Is this a known issue?!
In the meantime, just booting in and out of Fastboot over and over eventually seems to work. :/
Click to expand...
Click to collapse
Yes, it's a known bug. Magisk 16.6-16.7 beta work better.
sipollo said:
Yes, it's a known bug. Magisk 16.6-16.7 beta work better.
Click to expand...
Click to collapse
If I'm currently running Magisk 16, can I safely flash 16.7 over it?
KalolParty said:
If I'm currently running Magisk 16, can I safely flash 16.7 over it?
Click to expand...
Click to collapse
Yes, you can update from Magisk Manager or flash .zip in twrp without problems.
sipollo said:
Yes, you can update from Magisk Manager or flash .zip in twrp without problems.
Click to expand...
Click to collapse
I am running Magisk Manager 5.7.0 because it is the last version to support OTA updates properly.
And I can't update Magisk before updating Magisk Manager (if I try to do it within Magisk Manager). So I will flash the .zip.
dadnammit said:
I am running Magisk Manager 5.7.0 because it is the last version to support OTA updates properly.
And I can't update Magisk before updating Magisk Manager (if I try to do it within Magisk Manager). So I will flash the .zip.
Click to expand...
Click to collapse
Last zip includes Magisk Manager too.
Related
================================
Solution: http://forum.xda-developers.com/one...bootloader-locked-t3212187/page2#post63494201
================================
Hello,
This afternoon, I was preparing to flash Oxygen OS 2.1 through twrp but I wanted to make a backup first. Attempting to load up twrp by holding Vol- and Power, my OPT flashed the starting frame of the boot animation for half a second before turning off. This repeated every 5 seconds. I could still boot OOS normally at this stage.
I decided to reflash twrp so as to make the backups, but on attempting to flash it, I saw that my bootloader was locked. So into fastboot mode I went, but trying to unlock it, it did the same as trying to get into recovery. As soon as I sent the command, "fastboot oem unlock", the screen went dark, flashed the starting frame for the boot animation, and promptly when dark again.
I now can't boot up normally, nor can I enter recovery. I can access fastboot mode, but I can't seem to make any changes.
I've attempted to use this solution as well as several other similar ones with no success.
I've had my OPT since 17th of August with absolutely no signs of trouble until this afternoon.
To me, it seems like it could be a hardware issue, but I'd hope it would last more than 40 days.
Any suggestions?
Thanks.
----
x-post: whirlpool, reddit
The same just happened to me, wtf
Makrilli said:
The same just happened to me, wtf
Click to expand...
Click to collapse
What were you doing before it occurred? Perhaps we can work out the cause.
GusGold said:
What were you doing before it occurred? Perhaps we can work out the cause.
Click to expand...
Click to collapse
I'm not sure what I was doing, I was going to flash different ak kernel as my wifi didn't work.
HOWEVER
I read someone suggesting if you still have bootloop after trying the qualcomm recovery tool, try booting to fastboot and use: fastboot continue
my opt booted nicely to hydrogen os and after I shut it down it no longer bootlooped and I was able to get to recovery.
I'll post this to your reddit thread too, maybe it might help somebody one day, hopefully this works for you too
Makrilli said:
use: fastboot continue
Click to expand...
Click to collapse
Mate! that worked for me too!
However... It only seems to skip the bootloop for that power on. After power off, it returns to the boot loop. I also still can't unlock the bootloader and can't access recovery.
But at least it can boot into OS with fastboot continue!
Thank you.
Weird, after the first successful boot I rebooted and a chinese menu prompted me if I wanted to unlock the bootloader, and I did.
Maybe you should try different recovery packages.
But I'm glad to hear you at least got past the boot loop
Makrilli said:
Maybe you should try different recovery packages.
Click to expand...
Click to collapse
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
GusGold said:
Can't flash a new one since the bootloader won't unlock :/
I guess the phone is in working order at the moment, I just can't let it get turned off without my computer next to me...
Click to expand...
Click to collapse
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Makrilli said:
Nono I mean different qualcomm recovery packages, the ones with MSM8994DownloadTool, I also replaced the stock recovery in the qualcomm package with twrp just in case if that matters
Click to expand...
Click to collapse
Ahh, do you mind linking me to the one you used?
I think I used this: https://mega.nz/#!EsNQHKab!ifATzg4rxxBniPad0iyxANqlN8cZpUx2MVWaZgEhrD4
but it might have also been this: https://drive.google.com/file/d/0B14IjYN3PtxcSlJ5aGQxX3JERHM/view?usp=sharing
It's also worth mentioning I flashed both a few times before I tried the fastboot continue command so try both a few times and see if that helps, also I replaced the stock recovery with twrp in both recovery packages before flashing.
Edit: And best of luck, I'm rather confident your OPT is going to work properly again.
Boot Loop
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
p3wb said:
I got the same problem.
Phone is rooted and i can't unlock it in cmd, just reboot itself when i try it.
The only way for me to even start the OPT is to (volume+ and power), to get to fastboot mode, then run "fastboot continue" twice in cmd.
If i reboot the phone it get cought in a boot loop where i can see the logo, reboots about every 2 sec.
Is there a solution for this? I've been searching 2 for two days now.
I don't care if i have to reset the entire phone.
Click to expand...
Click to collapse
And I'm guessing you have tried the qualcomm recovery tool?
And I'm guessing you have tried the qualcomm recovery tool?[/QUOTE]
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
p3wb said:
And I'm guessing you have tried the qualcomm recovery tool?
Click to expand...
Click to collapse
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.[/QUOTE]
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT
Makrilli said:
I got TWRP installed but its unreachable, volume- and power ends in boot loop.
I can´t install anything when the phone is locked.
I even tried a Factory reset, boot loop and no change when i got it up again.
Click to expand...
Click to collapse
Yeah but the qualcomm recovery tool that we discussed on the first page?
Sent from my OPT[/QUOTE]
I finally got my OPT working again, tried Qualcomm recovery tool, wasn't able to complete the "MSM8994DownloadTool"
So i downloaded "A2001_14_A.03_150805" in a guide from technobuzz.net/unbrick-oneplus-2/
A similar but it does a entire wipe of the phone, nothing left at all. WARNING!
But i was okey with it.
Well the phone was in Chinese when it was all done but to change language was no problem.
I finally managed to solve it on mine. I had been cautious over the past weeks to not let it run out of battery or get turned off while away from my computer as
Code:
fastboot continue
was the only way I could get past the boot loop.
My core issue to solve was that I couldn't get it recognised as the USB Diagnostic 9006 under Ports in Device Manager. I installed the driver from here manually by right clicking the /qcser/x64/qcser.inf file and selecting install from the context menu. Then, I powered off my OP2. While only holding Vol+ (not power or Vol-), I plugged in my OP2 to the computer and it was finally recognised as the 9006. Then using the recovery tool from the prior link, it installed and rebooted my OP2. The moment of truth was when it rebooted and didn't enter a boot loop!
Then with the Chinese recovery prompt, I selected the top/first option and it brought me to the welcome/first setup screen of OOS.
It wiped the internal memory, and installed OSS 2.0.2 (don't know if coincidence or not as that was my prior OS as well). Now to install twrp and update to the latest OOS hopefully without a hitch.
Happy to finally know it wasn't a hardware issue like a failed eeprom or a dud nand controller as my prior phone (Samsung Note 10.1) died to a failed nand controller as well.
Will update with news of twrp and OOS, but I feel that should go smoothly now. Thanks to the others that helped in this thread too!
Yeap, all good!
Flashed official twrp through fastboot and batch installed OOS2 through 2.1.1 patches and SuperSU. Everything working like new!
Phew.
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
gamdiiii said:
hi can one of you guys help me out? on teamviewer? mine is stock in the bootloop and i can only get it to boot up via fastboot continue. and i cant figure out how to get it to work. i would like to go back to complete stock and no root
best Martin
Click to expand...
Click to collapse
Is it recognised as a USB Diagnostic 9006 in your device manager?
Hi GusGold No its 9008
Hello everyone,
here what's happenend:
I have downloaded the ota normally
charge enough
click on install
the installation looked normal
after the installation was finished it boots normally until the "Android was updating, optimize apps.." come that runs from 0 to 89 apps and then it reboots
and at this point something went wrong.
the oneplus bootlogo appeard and the boot animation plays. but when it finished the screen is black and after a few seconds the "android was updating" banner appeard again.
then it goes again in the bootanimation and so on..
i've restarted my phone by pushing the powerbutton once. still not working.
My phone is stock!
no root
no costum recovery
I hope you can help me.
Cheers, Confused.
additional Information
i'm able to open the recovery mode
confusedx3 said:
i'm able to open the recovery mode
Click to expand...
Click to collapse
If you are able to boot into twrp then follow the guide mentioned below (Twrp has MTP enabled just in case u didn't know) :
http://forum.xda-developers.com/oneplus-2/general/zip-oxygenos-3-x-t3392826
thank you for the answer.
i dont have twrp installed i've only the stock recovery
what if i do a factory reset ?
i read this as a solution here:
https://www.reddit.com/r/oneplus/comments/3mtavv/opt_stuck_in_boot_loop_after_ota_update/
do you think that work in my case ?
confusedx3 said:
thank you for the answer.
i dont have twrp installed i've only the stock recovery
what if i do a factory reset ?
i read this as a solution here:
https://www.reddit.com/r/oneplus/comments/3mtavv/opt_stuck_in_boot_loop_after_ota_update/
do you think that work in my case ?
Click to expand...
Click to collapse
Yes
i am also stuck at same situation but the prob is i hav no recovery installed and i dont want to loose my internal data...is there a way to roll back ????
same here
I also installed through the software update button.
Everything seemed to work fine till optimizing apps.
Then my phone was showing starting apps...
it did it for an indefinite time and then i pressed the power button to reboot the phone.
however now it is not moving beyond the android logo and i dont want to lose my data so i am not clearing data.
i tried clearing my cache.
Any help please?
I am using stock recovery,unrooted phone,OOS 3.0.2
Hello, it is my first time trying to write a post on xda so excuse me if I do something wrong.
I've been playing with Roms a lot of time, installing, uninstalling, bricking and unbricking phones. so have a pretty good idea of how it works but now I just don't know what I did wrong and my phone is just ... in a black screen after boot image.
I was currently on DP5 android 9 by @joeyhuab and everything worked perfectly. Today was released android Pie and I just want to try it. So, I made the steps for DP5 to PR1 and everything runs well until I reboot from TWRP to the system. Now when I turn the phone on. it just appears the boot logo and later a black screen.
I can't restart the phone pressing the power button after some seconds but it goes to the boot image and later the black image screen (of the dead) appears.
1. I can't go to TWRP. (power+ Vol+)
2. I can't go to Fastboot. (power+ Vol-)
3. Charge Image is not displaying.
Windows sounds when i connected on the black screen state but fastboot don't.
This is my first time dealing with this kind of problem. I just don't know what would be the next step to try, Mi A1 is one of the best phones and I don't want to lose it.
Thank you for reading XDA, You are the best
hiddengoka said:
Hello, it is my first time trying to write a post on xda so excuse me if I do something wrong.
I've been playing with Roms a lot of time, installing, uninstalling, bricking and unbricking phones. so have a pretty good idea of how it works but now I just don't know what I did wrong and my phone is just ... in a black screen after boot image.
I was currently on DP5 android 9 by @joeyhuab and everything worked perfectly. Today was released android Pie and I just want to try it. So, I made the steps for DP5 to PR1 and everything runs well until I reboot from TWRP to the system. Now when I turn the phone on. it just appears the boot logo and later a black screen.
I can't restart the phone pressing the power button after some seconds but it goes to the boot image and later the black image screen (of the dead) appears.
1. I can't go to TWRP. (power+ Vol+)
2. I can't go to Fastboot. (power+ Vol-)
3. Charge Image is not displaying.
Windows sounds when i connected on the black screen state but fastboot don't.
This is my first time dealing with this kind of problem. I just don't know what would be the next step to try, Mi A1 is one of the best phones and I don't want to lose it.
Thank you for reading XDA, You are the best
Click to expand...
Click to collapse
Press vol+ vol- + power at the same time until phone vibrates
Sent from Mi A1 with Tapatalk Pro
hiddengoka said:
Hello, it is my first time trying to write a post on xda so excuse me if I do something wrong.
I've been playing with Roms a lot of time, installing, uninstalling, bricking and unbricking phones. so have a pretty good idea of how it works but now I just don't know what I did wrong and my phone is just ... in a black screen after boot image.
I was currently on DP5 android 9 by @joeyhuab and everything worked perfectly. Today was released android Pie and I just want to try it. So, I made the steps for DP5 to PR1 and everything runs well until I reboot from TWRP to the system. Now when I turn the phone on. it just appears the boot logo and later a black screen.
I can't restart the phone pressing the power button after some seconds but it goes to the boot image and later the black image screen (of the dead) appears.
1. I can't go to TWRP. (power+ Vol+)
2. I can't go to Fastboot. (power+ Vol-)
3. Charge Image is not displaying.
Windows sounds when i connected on the black screen state but fastboot don't.
This is my first time dealing with this kind of problem. I just don't know what would be the next step to try, Mi A1 is one of the best phones and I don't want to lose it.
Thank you for reading XDA, You are the best
Click to expand...
Click to collapse
I also had this issue I think it is because of any xposed modules or magisk modules.
When I flashed xposed uninstaller, the phone revived
hiddengoka said:
Hello, it is my first time trying to write a post on xda so excuse me if I do something wrong.
I've been playing with Roms a lot of time, installing, uninstalling, bricking and unbricking phones. so have a pretty good idea of how it works but now I just don't know what I did wrong and my phone is just ... in a black screen after boot image.
I was currently on DP5 android 9 by @joeyhuab and everything worked perfectly. Today was released android Pie and I just want to try it. So, I made the steps for DP5 to PR1 and everything runs well until I reboot from TWRP to the system. Now when I turn the phone on. it just appears the boot logo and later a black screen.
I can't restart the phone pressing the power button after some seconds but it goes to the boot image and later the black image screen (of the dead) appears.
1. I can't go to TWRP. (power+ Vol+)
2. I can't go to Fastboot. (power+ Vol-)
3. Charge Image is not displaying.
Windows sounds when i connected on the black screen state but fastboot don't.
This is my first time dealing with this kind of problem. I just don't know what would be the next step to try, Mi A1 is one of the best phones and I don't want to lose it.
Thank you for reading XDA, You are the best
Click to expand...
Click to collapse
I have the same problem, my Mi A1 dont boot and i cant open fastboot mode (and screen dont turn on when charging), how you solved it?
Stuck on black screen
i was on aex 6.1 flashed this build and stuck on black screen.and i am unable to go to twrp .. steps i used to flash this
-->clean wipe(system,dalvik,data)
-->flashed aex6.2
-->flashed twrp installer
-->reboot to recovery
but it didnt reboot to recovery.
i think it boots but it shows only black screen as when i am taking screenshots its making sound.
ideepeshtiwari said:
i was on aex 6.1 flashed this build and stuck on black screen.and i am unable to go to twrp .. steps i used to flash this
-->clean wipe(system,dalvik,data)
-->flashed aex6.2
-->flashed twrp installer
-->reboot to recovery
but it didnt reboot to recovery.
i think it boots but it shows only black screen as when i am taking screenshots its making sound.
Click to expand...
Click to collapse
im also having the same issue. while flashing aex v6.2 on my mi a1
help me out from the same problem
This morning i have flashed havoc 2.0 after that flashed TWRP recovery and then i reboot to recovery mobile gets rebooted and after the boot page the screen went black. I have rebooted the mobile so many times same issue facing i am receiving calls means mobile is ringing but i cant see anything on screen. Plz help me out
khadar709 said:
This morning i have flashed havoc 2.0 after that flashed TWRP recovery and then i reboot to recovery mobile gets rebooted and after the boot page the screen went black. I have rebooted the mobile so many times same issue facing i am receiving calls means mobile is ringing but i cant see anything on screen. Plz help me out
Click to expand...
Click to collapse
Flash the previous rom and everything will be back to normal.
Shilldas said:
Flash the previous rom and everything will be back to normal.
Click to expand...
Click to collapse
I am not able to do that I can't go to twrp mode here also same black black screen.I can go to fastboot mode but I am not enabled usb debugging mode and system is not recognising mobile.
Help me how can I solve this..
Thanks in advance. ?
Install 'scrcpy' in your PC. Try to flash twrp from PC using fastboot and adb method. (I hope fastboot shows up on your phone) if u can boot to twrp via PC then go ahead and install any other rom. If u can't then connect your phone to PC and open scrcpy.exe here you can control your screen. (Most custom roms come with usb debugging enabled, if not try " AEX V.6.1 rom)
Usb debugging is compulsory. Thanks a lot for the information I will try this.
So i had this exact same issue. It was booting to twrp but screen was just blank.
i was trying to root the devive so i flashed the zip file by following command through adb
adb shell twrp install /sdcard/Magisk-v23.0.zip
it flashed the magisk and it was done. Similarly you can flash any zip file. If zip file is not copied to internal memory you can copy it using following command
adb push Magisk-v23.0.zip /sdcard/
I hope it helps someone in need.
Thanks.
Hi similar problem. Phone was locked in bootloop. I use reset pin and flash latest fw, flash successful in 220sec. Then screen stays black. Holding any combination will power up phone with black screen... wonder if it burn resistor or it is a flash issue. Trying to reflash again, however it stays 1000sec and still flashing.
Hi have mine FIXED.
Tried again to flash with android 9. Not able to finish flash in 4hrs. Then disconnect. Screen show battery 100%, then again only black screen but powered. Also 3 buttons are lighting. So I start pushing them and the screen, got some feedback and sound from touching the screen. Then the phone restart, screen ON. Show the normal white screen and ENCRYPTING storage screen that should come after flash. Then again reboot itself and start installing android (just taking a lot of time). Now all work on android 9, not giving option for OEM update to android 10, however afraid to flash again... good enough for my son (either way will break it in an year).
p.s
Im Samsung S class user for 10 years, so it is quite unfriendly phone... (need debugging on to connect to PC, for file transfer )
At last I found a way to run TWRP on tissot correctly without black screen.
Just install oreo 3.2.1-2 on Mi A1 (tissot).
This file (recovery-3.2.1-2-oreo.img) is working well.
Download it from this site:
https://androidfilehost.com/?fid=818070582850498337
Reference:
https://forum.xda-developers.com/t/...2-1-2-oreo-touch-recovery-2018-03-06.3688472/
Download Android 13.00 unofficial ROM for Mi A1 and install it easily by TWRP oreo 3.2.1-2:
https://sourceforge.net/projects/lafactorial-tissot/files/
Good luck,
Sed
Releases · zignas/twrp_device_xiaomi_tissot_treble
android 9.0 Device tree for TWRP 3.5.2 with Tissot manager - zignas/twrp_device_xiaomi_tissot_treble
github.com
also working fiine
Hi
RP2, GSI roms (I tried three: LOS 17, NitrogenOS, RevenageOS), arter97-kernel-r12, Magisk-v20.3
I am installing a GSI ROM, the system is working. after the third or more reboot, the phone is booted to a black black screen.
Wipe all data, phone booted.
doing something simple (install software from google play,restore data from old device via google restore)
restart
phone booting to blank black screen with sound. computer (USB) recognized the phone.
Tried with Magisk, withour Magisk, restored vendor.img from origin (I was deleted the two apks for BT).
clear data
phone booted
restore
blank again
where to start debug it ?
Same problem with me, I had my phone on phhusson treble ROM (android 10) then went back stock and hated it....tried to flash the phhusson treble ROM again and she boots but to a black screen, you can hear via sound it's up just the screen is black....let me know if ya finger anything out
DaveyBoy2002 said:
Same problem with me, I had my phone on phhusson treble ROM (android 10) then went back stock and hated it....tried to flash the phhusson treble ROM again and she boots but to a black screen, you can hear via sound it's up just the screen is black....let me know if ya finger anything out
Click to expand...
Click to collapse
did you tried Android 9 ROMS or this is only 10 problem?
I was rooted and installed Magisk on the stock, I hate the stock like you but it works.
Haven't tried a android 9, I'm back at work and used 4gb of data screwing around yesterday trying to get things fixed so I gotta go easy today ?
moshe_lm said:
Hi
RP2, GSI roms (I tried three: LOS 17, NitrogenOS, RevenageOS), arter97-kernel-r12, Magisk-v20.3
I am installing a GSI ROM, the system is working. after the third or more reboot, the phone is booted to a black black screen.
Wipe all data, phone booted.
doing something simple (install software from google play,restore data from old device via google restore)
restart
phone booting to blank black screen with sound. computer (USB) recognized the phone.
Tried with Magisk, withour Magisk, restored vendor.img from origin (I was deleted the two apks for BT).
clear data
phone booted
restore
blank again
where to start debug it ?
Click to expand...
Click to collapse
Yea I've had the same results as well.
Try Havoc and PE from these links. They are phhusson based and work with some bugs but at least you can boot up after the third time
https://sourceforge.net/projects/expressluke-gsis/files/
moshe_lm said:
did you tried Android 9 ROMS or this is only 10 problem?
I was rooted and installed Magisk on the stock, I hate the stock like you but it works.
Click to expand...
Click to collapse
SO! got home from work, flashed the rom that i was having issues with (phhusson's android 10 build) BAM, booted just fine, did the whole big restore thing, figured this was going TOO well so i figured i better test a restart.....and BAM black screen, lock sounds, everything just nothing on the screen. so I volume down & powered till it reboot....and the screen is back!.. so why does it need this? idk but atleast it gets me workin with android 10 again!
DaveyBoy2002 said:
SO! got home from work, flashed the rom that i was having issues with (phhusson's android 10 build) BAM, booted just fine, did the whole big restore thing, figured this was going TOO well so i figured i better test a restart.....and BAM black screen, lock sounds, everything just nothing on the screen. so I volume down & powered till it reboot....and the screen is back!.. so why does it need this? idk but atleast it gets me workin with android 10 again!
Click to expand...
Click to collapse
It is working after second restart ? or one time ?
moshe_lm said:
It is working after second restart ? or one time ?
Click to expand...
Click to collapse
If you want/need to restart if you do it via the power button then hitting restart, it will boot to a black screen. But if you hold the power and volume down till it reboots, it'll boot perfectly. Happens every time for me
DaveyBoy2002 said:
If you want/need to restart if you do it via the power button then hitting restart, it will boot to a black screen. But if you hold the power and volume down till it reboots, it'll boot perfectly. Happens every time for me
Click to expand...
Click to collapse
volume down isn't go to fastboot mode ?
moshe_lm said:
volume down isn't go to fastboot mode ?
Click to expand...
Click to collapse
Not if you let go when you see the screen turn off, then it's just a dirty restart I guess?
In my case, it only happens when you use the Encrypt password to start the device.
So I suggest skipping the encrypt part on startup setting and the problem should gone.
*Sorry for my bad English.
In my case, Don't use the "Secure start-up" thing when you set up your phone in Android 10.
Nor It will mess and cause a black screen on your device.
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
pleasuremann said:
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
Click to expand...
Click to collapse
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
levone1 said:
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
Click to expand...
Click to collapse
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
pleasuremann said:
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
Click to expand...
Click to collapse
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
levone1 said:
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
Click to expand...
Click to collapse
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
jayeffpee said:
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
Click to expand...
Click to collapse
Does fastboot work? Also, what do you ultimately want to do, return to stock?
levone1 said:
Does fastboot work? Also, what do you ultimately want to do, return to stock?
Click to expand...
Click to collapse
yes, after hard work to install drivers, I managed to get the phone to be recognized by Flashtool in fastboot mode. But the phone is not charging when turned off, and its not rebooting. I wanted to try again with stock ROM, since I got some battery issues with LineageOS (phone turned off while playing some games, and worked fine while doing the same with usb cable charging to laptop or AC charger.)
But I cannot do anything right now. Only fastboot mode and force restart works, but it stuck in Sony logo (after normal bootloader unlock 5 seconds warning). What can I do?