Database Users

What are the files to download and flash to get RCmixHD

HI all,
Ca you help me in flashing RCmixHD [2.3.3,SENSE 2.1,720p video,tb unlock] v1.0.1 ROM. I need to know which are the files I have to download and flash. Thanks in Advance.
With regards
<Manic>

There is a whole section titled ROM links, it shouldn't be that hard to work out :/
If you're generally referring to flashing a custom rom then have a good read at the Nexus One wiki, it'll help you understand a little more.

manicsen said:
HI all,
Ca you help me in flashing RCmixHD [2.3.3,SENSE 2.1,720p video,tb unlock] v1.0.1 ROM. I need to know which are the files I have to download and flash. Thanks in Advance.
With regards
<Manic>
Click to expand...
Click to collapse
ill upload it. the rom seems to be only showing up as 1.01mb on the OP thread. ill post link when im done

charlieb620 said:
ill upload it. the rom seems to be only showing up as 1.01mb on the OP thread. ill post link when im done
Click to expand...
Click to collapse
It might help if you read the posting fully. You need to download all three files.
1. RCmixHD 1.0
2. USB Fix
3. 1.0.1 Update
Install them in this order, reboot between each install. And make sure you fully wipe your device first.

What about for Version 1.1.. I think i can download that single file and flash the ROM..

hi,
i downloaded RCmixHD [2.3.3,SENSE 2.1,720p video,tb unlock] v1.1 ROM and flashed it after full wipe..
During the time of flashing i am getting this message.. Kindly help me in clearing this problem
E:Missing file:
ext/system-VR/0419/libCBLexMgr.0419.so
E: Verification failed
zip verification failed
zip isn't signed correctly.
Installation aborted..

manicsen said:
hi,
i downloaded RCmixHD [2.3.3,SENSE 2.1,720p video,tb unlock] v1.1 ROM and flashed it after full wipe..
During the time of flashing i am getting this message.. Kindly help me in clearing this problem
E:Missing file:
ext/system-VR/0419/libCBLexMgr.0419.so
E: Verification failed
zip verification failed
zip isn't signed correctly.
Installation aborted..
Click to expand...
Click to collapse
Disable signature verification(If you're using RA Recovery, you can see 'toggle signature...', and I think Clockwork also has such option) and try it again.

Hi,
Is it Safe to flash Unsigned ROM.. or i have to wait for Signature once full ROM is there..
<Manic>

manicsen said:
Hi,
Is it Safe to flash Unsigned ROM.. or i have to wait for Signature once full ROM is there..
<Manic>
Click to expand...
Click to collapse
Although it warns about unsigned ROM/updater, I think if it is from reliable developer, it's usually OK, though I feel developers should sign their .zip files after packing is done.

thanks.. i have flashed already

Flash Cyanogen over CWM

Hello,
i got a problem, i want to flash cyanogen over CWM. At first i flashed my phone to another Firmware, i used the tutorial.
The flash worked and now i want to flash cyanogen over CWM, but all time i got this Message in the recovery:
E: Failed to verify whole-file signature
E: signature verification failed
Installation aborted.
Someone can help me please??
I got the following building on my Samsung Galaxy S
Firmware-Version: 2.3.6
Basisbandversion: I9000XXJVU
Kernel-Version: [email protected] #2
Buildnummer: GINGERBREAD.XXJVU
It was my first time, that i flashed my phone, i wish someone can help me.
P.S.: my english is not so good

Redownload cm and try again

I did, but it still not work and show me all time the same fail :-(

Try removing your external sdcard and then going into CWM

you are trying to flash an unsigned zip in stock recovery. the stock recovery checks if the zip is signed. if it is, the recovery applies the update. but the zip you are flashing is not signed, so it checks the zip and cannot find a signature. then it aborts the installation.
your solution is to flash a custom kernel, for example Galaxian. after flashing install the zip again, it will work like a charm
if you have any more problems, don't hesitate to send me a PM in German

I wrote you a message Noobproof, hope you understand

[Q] Need Help in installing Jelly Bean on Defy+

I want to install Jelly Bean on Motorola Defy+...
I had earlier installed it with this zip cm-10.2-20130917-NIGHTLY-mb526...
But since I tried to install kit kat on it which I m not able to....
So, I began from start
1. installed DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf than,
2. installed firmwaresbf to root it. Rooted Saw Superuser In Menu. Than,
3.insatlled CyanogenDefy Recovery v5.0.3.1-jordan recovery. than
4.Try to install cm-10.2-20130917-NIGHTLY-mb526. by going in custom recovery But now I got this Error
Installing Update...
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip
(Status 0)
Installation aborted.
5. Also want to install Team win recovery Project....
One More thing this is a same Zip from which I installed Jelly Bean on Defy+.... I haven't deleted it... so it Can't be corrupted I think so...
Please HELP.
Provide me your valuable assistance...

Tooooo many tutorials was posted on this subject. Is enough.
In the forum rules is stipulated that first search and if you NOT found anything then ask!

can u post a link of the forum that can explain.....
pgreed said:
Tooooo many tutorials was posted on this subject. Is enough.
In the forum rules is stipulated that first search and if you NOT found anything then ask!
Click to expand...
Click to collapse
can u post a link of the forum that can explain.....that will be very helpful
&
Thanks for Answering...
Pls Help....

it would've took you less time answering him than complaining.
Mate, I've had this very problem.
You need to flash an earlier version of cm. try cm10 or 10.1.
it doesnt work because you have an outdated recovery. flashing cm10 solves this.
Good luck!
edit: after you flash cm10 make sure to get the 20 oct version of cm10.2 as the 17 sept you tried to flash is not the latest

defynoob said:
it would've took you less time answering him than complaining.
Mate, I've had this very problem.
You need to flash an earlier version of cm. try cm10 or 10.1.
it doesnt work because you have an outdated recovery. flashing cm10 solves this.
Good luck!
edit: after you flash cm10 make sure to get the 20 oct version of cm10.2 as the 17 sept you tried to flash is not the latest
Click to expand...
Click to collapse
Not necessary. If you has follow my explanation (from other post) you've found that is another simplified method.

still Help Needed
pgreed said:
Not necessary. If you has follow my explanation (from other post) you've found that is another simplified method.
Click to expand...
Click to collapse
Try to install this with recovery but still getting same error cm-11-20131229-NIGHTLY-mb526.zip
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip
(Status 0)
Installation aborted.
Pls Help Me

no one there to HELP!
What happen is there no one who can provide any HELP to me...
As I want it much...
Pls Help Me...
thanks in advance..

I have the same problem now with my new Defy+.I had 2 Defys+ in past and just root and install 2init then instal .zip CM9 or CM10 and love it.Now I go to kill myself.From more than week I flash,install,reboot,reflash....and have no fully working Cm10.First I have no way to install newer than cm10.0!Any try with 10.1 or 10.2 is folow ERROR in the beginning and nothing more.My custom recovery now is CWM.Any try to update recovery or try with TWRP,or try dual recovery or,or...is going to boot loop or sot brick...Now Im on CM10/Android 4.1.2 and try to get telephony functions.Im in Bulgaria and before with previous Defys I use baseband switch to 342-145.Now just after install new ROM(CM10) telephony worked first couple of minutes,not more.After dialing it come to black screen or in normal incall screen but no voice from bot sides.I switch to other bands but nothing.It come to pissed me out.Please help

I go directly to CM11, it is much stable now.

Not able to install TWRP
Not able to install TWRP Tried by installing it from CyanogenDefy Recovery v5.0.3.1-jordan recovery and it says installed successfully from SD card but not able to boot in team win recovery project and therefore not able to install any CM version Yet
trying n getting nstalling Update...
E:Error in/sdcard/cm-10.2-20130917-NIGHTLY-mb526.zip or any other cm version
(Status 0)
Installation aborted.
Need help pls help me...:crying:

[SOLVED!] Unable to flash MIUI - Status 7

PROBLEM FOUND AND FIXED! Answer in Post #3
http://forum.xda-developers.com/showpost.php?p=53784248&postcount=3
Hey guys
I've been trying to install MIUI for hours, using both CWM or TWRP, and I'm always receiving the same error message:
Writing recovery
set-perm: some changes failed
E:Error in /sdcard/miui_i9500_4.6.20_27061504e7_4.2.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
I've flashed CM without a problem, and an original stock ROM as well.
Why is MIUI giving me a hard time?
**I already followed this guide: http://en.miui.com/thread-13226-1-1.html**
Thank you!

Omga4000 said:
Hey guys
I've been trying to install MIUI for hours, using both CWM or TWRP, and I'm always receiving the same error message:
I've flashed CM without a problem, and an original stock ROM as well.
Why is MIUI giving me a hard time?
**I already followed this guide: http://en.miui.com/thread-13226-1-1.html**
Thank you!
Click to expand...
Click to collapse
Use Philz recovery (just flash zip attch in rec) it's something to do with the older binary code-that's why it's status 7 ?

Well, after deciding to fix this problem once and for all, I added a "ui_print" after
every (well not every) line, to see exactly where is the installation failing.
The discovery? It fails at:
set_perm(0, 0, 0555, "/data/local/tmp/relink");
Click to expand...
Click to collapse
The solution?
Change all "/data/local/tmp/relink" into "/tmp/relink" like so:
package_extract_file("META-INF/com/miui/relink", "/tmp/relink");
set_perm(0, 0, 0555, "/tmp/relink");
run_program("/tmp/relink");
delete("/tmp/relink");
Click to expand...
Click to collapse
Problem solved - clean installation with no errors

Hi Anyone having issue with offline charging in MIUI ROM ?
Sent from my GT-I9500 using XDA Premium 4 mobile app

Omga4000 said:
Well, after deciding to fix this problem once and for all, I added a "ui_print" after
every (well not every) line, to see exactly where is the installation failing.
The discovery? It fails at:
The solution?
Change all "/data/local/tmp/relink" into "/tmp/relink" like so:
Problem solved - clean installation with no errors
Click to expand...
Click to collapse
Hi! sorry
Please how can I clearly follow your guide I'm Noob and dont really know about this. So can you please guide me with a step by step.
Thanks for understanding

mckalyster said:
Hi! sorry
Please how can I clearly follow your guide I'm Noob and dont really know about this. So can you please guide me with a step by step.
Thanks for understanding
Click to expand...
Click to collapse
1) Extract "updater-script" from the ROM file (using winrar for example)
It's located in META_INF > COM > GOOGLE > ANDROID
2) Change the parts I wrote in the previous post
3) paste the "updater-script" file inside the rom
Good luck

i9500 MIUI Flashing Error
After downloading the MIUI ROM, open with winrar and locate the updater-script
\META-INF\com\google\android\updater-script
and remove the first line of code
getprop("ro.product.device") == "ja3g" || getprop("ro.product.device") == "ja3g" || abort("This package is for "ja3g" devices; this is a "" + getprop("ro.product.device") + "".");
save and update from the winrar app.
Try flashing again but disable the zip verification......Done
Big ups to Edwin270

i have installed cwm recovery in my mi4 and forgot which rom i have installd just to update the android version from kitkat to marshmallow(6.0)after installed it converted into completely android phone there is no sign of miui rom so plz tell me how to get it back. even i have tried to installed miui 8 rom bt it showing 'installation aborted' i have tried many times in a differnt way i have tried everything but still i am not able to install zip file that is miui 8 rom. please help anyone wht to do now?

Don't use cwm, use twrp to flash custom roms.

[HELP] Error 7

I was using a custom ROM on my phone and tried to install the stock rom. When I went to make a wipe through TWRP I accidentally checked the Internal Storage option. I don't know if this is related but I think it is. Anyway... when I went to try and flash the stock rom I got the following error:
"failed to parse int in 205815 test
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/UL-ASUS_X00T...zip"
Tried other custom ROMs and it didn't work also.
Help me because this is my only and main phone and now I simply have no idea on how to fix this.
Please if you have any input it will be massively appreciated.
{Mod edit: Inappropriate language edited in accordance with rule no. 2 of the XDA Forum Rules! Oswald Boelcke}