Hello,
i got a problem, i want to flash cyanogen over CWM. At first i flashed my phone to another Firmware, i used the tutorial.
The flash worked and now i want to flash cyanogen over CWM, but all time i got this Message in the recovery:
E: Failed to verify whole-file signature
E: signature verification failed
Installation aborted.
Someone can help me please??
I got the following building on my Samsung Galaxy S
Firmware-Version: 2.3.6
Basisbandversion: I9000XXJVU
Kernel-Version: [email protected] #2
Buildnummer: GINGERBREAD.XXJVU
It was my first time, that i flashed my phone, i wish someone can help me.
P.S.: my english is not so good
Redownload cm and try again
I did, but it still not work and show me all time the same fail :-(
Try removing your external sdcard and then going into CWM
you are trying to flash an unsigned zip in stock recovery. the stock recovery checks if the zip is signed. if it is, the recovery applies the update. but the zip you are flashing is not signed, so it checks the zip and cannot find a signature. then it aborts the installation.
your solution is to flash a custom kernel, for example Galaxian. after flashing install the zip again, it will work like a charm
if you have any more problems, don't hesitate to send me a PM in German
I wrote you a message Noobproof, hope you understand
Related
Hey guys,
so, a lot of my quetstions will be already posted, but i can´t find them all.
So i hope i annoy no one here ;-).
Ok, now to the important:
I have a SGS until 6 month. over the time i learnd a lot of android and i´m very lucky with them.
Then i heard from cyanogenmod. and all i read about it is great.
i have knowledges about root of linux an so of android.
So, during my research i have a lot of question before i flash my sgs:
- i found only one forum enty where i read i have to format all partitions.
So, how do i flash a sgs?
i have a modded boot rom with root and clockwork mod.
I tried a backup of the system.
the rom manager don´t show ne the cm7 mod for my device.
Do anyone know why? because the RC status?
When i get an error, how can i rollback my firmware with the backup?
Which pc software i need?
my plan ist to flash the sgs with the experimental version, no nightly build.
CWM makes al lot if IMG files. the cm7 zip has only one IMG.
So, i hope anyone can tell some or send my some nice links.
thanks a lot :-D
ravn
Use this
Boom, that's how it's done folks.
Sent from my I9000m running Cyanogen Mod Nightly
Hey,
thanks guys.
So, can anyone explain me how i can go back to the original rom if i got any probs or even i want?
So, i made a backup with Titanium Backup (premium user) and secondly with CWM.
So, i copied them to my PC.
CWM makes some IMG files. So, how can i rollback them to my device?
Also if i try to create a rom image with the rom manager the recovery manager makes a error.
:-D
So, i get by saving my rom the following error:
-- Installing package ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E:signature verification failed
Installation aborted.
Why do the rom manager want to install a package by making an backup?
PS: i have the rooted bootloader: PDA_XXJVK_Sbl.tar installed.
to revert back to you need to revert to a stock rom. using odin and a full PDA froyo will do the job.
Hey,
so u mean, i have to download the offical rom and install them over odin.
then i have to root them and install CWM and reverse the backup.
is that right?
ravn83 said:
Hey,
so u mean, i have to download the offical rom and install them over odin.
then i have to root them and install CWM and reverse the backup.
is that right?
Click to expand...
Click to collapse
yes.. that will be the proper way to do it.
Does anyone have a froyo kernel file with signed so that I can install it from Stock Recovery. Because every time I am going to install it , it checks for signature verification and installation aborted. And I cant go to the custom recovery because it wont even open.
If anyone have the file them please give me the link.
Thank you.
Hello guys, since I've installed CM12 I've been getting errors from TWRP when flashing CM updates.
I had a Nexus 4 and when I installed CM updates it usually rebooted to recovery and then TWRP would install it automatically, but it's not happening on my G2 D802. I have TWRP 2.8.5, installed with Autorec before flashing CM12 for the first time.
Error log says shortly after I start to flash CM updates:
E: ZIP file is corrupt!
E: Error installing zip fie '/cache/recovery/block.map'
Then it goes on and finishes flashing and it says successful, in fact it always works, but should I be concerned? Am I doing something wrong or it has something to do with the bootloader? I've read somewhere that you had to downgrade the bootloader in order to flash, but also read somewhere that autorec does that for you. I've also read that it could have been that I was using an old recovery, but I'm using the latest, I don't know what it could be...
Thanks in advance
Rino7617 said:
Hello guys, since I've installed CM12 I've been getting errors from TWRP when flashing CM updates.
I had a Nexus 4 and when I installed CM updates it usually rebooted to recovery and then TWRP would install it automatically, but it's not happening on my G2 D802. I have TWRP 2.8.5, installed with Autorec before flashing CM12 for the first time.
Error log says shortly after I start to flash CM updates:
E: ZIP file is corrupt!
E: Error installing zip fie '/cache/recovery/block.map'
Then it goes on and finishes flashing and it says successful, in fact it always works, but should I be concerned? Am I doing something wrong or it has something to do with the bootloader? I've read somewhere that you had to downgrade the bootloader in order to flash, but also read somewhere that autorec does that for you. I've also read that it could have been that I was using an old recovery, but I'm using the latest, I don't know what it could be...
Thanks in advance
Click to expand...
Click to collapse
No, wait. I got the same issue with BUMPED TWRP, please install the classic OpenTWRP 2.5.0 (not bumped) and you will upgrade the system without any issue.
Buona giornata, stammi bene e buon modding!
I'm using normal TWRP, downloaded latest versione from its website, I'm not using the bumped one.
cm 12 corrupt update and wifi problems
I have the same problem as u do! And when I leave my home wifi, and later return to it, I have to reboot the phone in order for it to connect to the home wifi again... In the wifi settings it says either "Connecting" or "Saved".
I would be very grateful for any help!
Same happens here, it installs fine, I just have to do it manually. I'm on TWRP v2.8.5.0.
Same here,I have to flash the zip manually.
hello to all the developers of xda and other who helps here.
i need your help on the issue which i mentioned in title.
i m trying to install CM12.1 provided by developer mukulsoni.
i have downloaded all the the files instructed by him
when i put my on recovery mode (kitkat recovery mod) n try to apply update from sd card for CWM and rom CM12.1 for both i got same error.
someone from here suggested me to install CWM through odin.
i tried that too but when i put my phone in download mode odin didn't recognise my device, while i connect with kids in normal condition it easily got detected.
Use cwm recovery to fix it
This is old, But i guess may help somebody else.
You have not installed recovery properly. Install the correct recovery file (you can follow this thread : http://forum.xda-developers.com/gal...recovery-twrp-2-8-6-0-touch-recovery-t3107535)
Once done then you should be able to flash any recovery/ROM (including Mukul's CWM)
Hey,
I want to use an app that requires android 4.3 or above so have to install a custom ROM. Now I've rooted my phone, formatted everything using CM, but as I try to install the zip file on my phone I get the following error:
Code:
E: Error in /external_sd/cm-11-20150325-UNOFFICIAL-e610.zip
(Status 7)
Installation aborted
Seeing as I'm surprised I got this far I'd say it's about time I asked for help.
Does anyone know what the problem is, and can anyone help me fix it?
Thanks in advance!
Try to use the latest version of CWM or TWRP to flash the CM11. I do not have a link to the latest version of CWM, but I have to TWRP.
here --->TWRP 2.8.7.0
Enviado do meu LG-E610