[Q] E: footer is wrong and E: signature verification failed. - Galaxy Grand 2 Q&A, Help & Troubleshooting

hello to all the developers of xda and other who helps here.
i need your help on the issue which i mentioned in title.
i m trying to install CM12.1 provided by developer mukulsoni.
i have downloaded all the the files instructed by him
when i put my on recovery mode (kitkat recovery mod) n try to apply update from sd card for CWM and rom CM12.1 for both i got same error.
someone from here suggested me to install CWM through odin.
i tried that too but when i put my phone in download mode odin didn't recognise my device, while i connect with kids in normal condition it easily got detected.

Use cwm recovery to fix it

This is old, But i guess may help somebody else.
You have not installed recovery properly. Install the correct recovery file (you can follow this thread : http://forum.xda-developers.com/gal...recovery-twrp-2-8-6-0-touch-recovery-t3107535)
Once done then you should be able to flash any recovery/ROM (including Mukul's CWM)

Related

Flash Cyanogen over CWM

Hello,
i got a problem, i want to flash cyanogen over CWM. At first i flashed my phone to another Firmware, i used the tutorial.
The flash worked and now i want to flash cyanogen over CWM, but all time i got this Message in the recovery:
E: Failed to verify whole-file signature
E: signature verification failed
Installation aborted.
Someone can help me please??
I got the following building on my Samsung Galaxy S
Firmware-Version: 2.3.6
Basisbandversion: I9000XXJVU
Kernel-Version: [email protected] #2
Buildnummer: GINGERBREAD.XXJVU
It was my first time, that i flashed my phone, i wish someone can help me.
P.S.: my english is not so good
Redownload cm and try again
I did, but it still not work and show me all time the same fail :-(
Try removing your external sdcard and then going into CWM
you are trying to flash an unsigned zip in stock recovery. the stock recovery checks if the zip is signed. if it is, the recovery applies the update. but the zip you are flashing is not signed, so it checks the zip and cannot find a signature. then it aborts the installation.
your solution is to flash a custom kernel, for example Galaxian. after flashing install the zip again, it will work like a charm
if you have any more problems, don't hesitate to send me a PM in German
I wrote you a message Noobproof, hope you understand

[Q] TWRP failed

I get a failure when trying to flash a new ROM. I have three different zips (ROMs) on my phone. None of them will install for some reason and I get a failed error and it puts something about an error when updating binary script? How could I fix this on my nexus 4?
If I need to update twrp could I do so without using goomanager to do this? Goomanager won't download the recovery so I have to use another method
You probably need to update to the latest TWRP version. Use the TWRP link in my signature and get the latest version in the "mako" folder.
Use fastboot to flash it, use the command:
fastboot flash recovery twrp.img
(replacing twrp.img with actual file name)
If you don't know how to use fastboot, use the 3rd link for guide on installing custom recoveries.
dreammaster252 said:
I get a failure when trying to flash a new ROM. I have three different zips (ROMs) on my phone. None of them will install for some reason and I get a failed error and it puts something about an error when updating binary script? How could I fix this on my nexus 4?
If I need to update twrp could I do so without using goomanager to do this? Goomanager won't download the recovery so I have to use another method
Click to expand...
Click to collapse
had the same error and resolved it like this:
installed ROM Installer vom play store
installed cwm, and then twrp again from rom installer.. worked perfectly!
BUT WHATCH OUT! i think the error you get is called "error 9".. or something like that, it appears, when you try to install a zip, and the updater-skripts cancels the installation process, e.g., because it is not hte right zip for your phone!
so look at first, if you have the right zip downloaded

[Q&A] [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATE

[Q&A] [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATE
Q&A for [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATED]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GUIDE] INSTALLING TWRP on LGG2 (VZW, AT&T, TMobile, KT, d802, others) [UPDATED]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
About flashing TWRP on the LG G2
This is a reply to the last post in the LG/TWRP post: http://forum.xda-developers.com/showthread.php?t=2449670&page=116
And specifically, I was about to ask the same question as "ctowne", about the lack of loki_flash in the loki package pointed in the instruction page.
I'm really stuck here, because I already "soft bricked" my phone (rooted LG G2 D802 international) in two different states that required a complete flash and wipe with the originale LG ROM and tool. And one of these was caused by the AutoRec tool, which apparently doesn't work for lot of people and could lead to bootloops.
So, before trying anything I'd like to be sure I'm doing the right thing, and more importantly, that I have the complete instructions to do it.
To sum it up:
-according to the thread, I need the loki package and the TWRP package, but there is no loki_flash inside the actual loki package
-but there's one inside the last TWRP package! Should I use this one?
-also, is not clear where I need to move all the files to make everything works
Thanks in advance.
pixelcamo said:
This is a reply to the last post in the LG/TWRP post: http://forum.xda-developers.com/showthread.php?t=2449670&page=116
And specifically, I was about to ask the same question as "ctowne", about the lack of loki_flash in the loki package pointed in the instruction page.
I'm really stuck here, because I already "soft bricked" my phone (rooted LG G2 D802 international) in two different states that required a complete flash and wipe with the originale LG ROM and tool. And one of these was caused by the AutoRec tool, which apparently doesn't work for lot of people and could lead to bootloops.
So, before trying anything I'd like to be sure I'm doing the right thing, and more importantly, that I have the complete instructions to do it.
To sum it up:
-according to the thread, I need the loki package and the TWRP package, but there is no loki_flash inside the actual loki package
-but there's one inside the last TWRP package! Should I use this one?
-also, is not clear where I need to move all the files to make everything works
Thanks in advance.
Click to expand...
Click to collapse
Are you sure you downloaded the correct version of autorec? I have a VS980 and autorec worked perfectly....even after updating to the latest version (26A), after which I flash TWRP 2.8.0.1 via recovery (which autorec installs 2.7.0.0).
simon_lefisch said:
Are you sure you downloaded the correct version of autorec? I have a VS980 and autorec worked perfectly....even after updating to the latest version (26A), after which I flash TWRP 2.8.0.1 via recovery (which autorec installs 2.7.0.0).
Click to expand...
Click to collapse
Apparently something went wrong with my first install. I tried again and the AutoRec flash went OK!
BTW, how do you update TWRP? Just flashing the zip via recovery and nothing else?
pixelcamo said:
Apparently something went wrong with my first install. I tried again and the AutoRec flash went OK!
BTW, how do you update TWRP? Just flashing the zip via recovery and nothing else?
Click to expand...
Click to collapse
Yes. Have whatever version of TWRP on your phone and flash it. Make sure to reboot recovery and it will show the current version flashed.
newbie
for starters my phone was rooted 2 hours ago , i used stump to root ,i have downloaded twrp and flashify from playstore...and im stuck i just want to finish the process i have lg g2 from sprint..i would appreciate any help thanx
help please
i have rooted my lg g2 but when i go into recovery to install a custom romm i get a dead android with his chest open and a red triangle with exclamation mark in it is there anyway to fix this with out a computer
I am using
VS980 4G LTE
Into recovery or custom recovery?
plz help
i have lg g2 32 gb.
thailand.bought 1 week ago.
it was running 4.4.2. when i checked ota it was latest. but when i checked through lg gupport tool. it had latest soft ver. then i updated . and got in trouble...
i saw that my mobile shows 10.6 gb, and baseband is unknown.
1. touch screen not work correctly. i touch something and open something else.
2. i have tried to upgared recovery. but after downloading the software lg support tool work stopped and get closed. also tried to factory reset but nothing changes.
3. then i tried to flash kdz.. and about 7 to 8 different kdz tried. but didnt get help.
4. then i tried to root and install custom recovery (twrp)
but first it didnt work then it worked by installing many drivers to recognized.
any how i got access to adb. and tried to root through loki_flash using adb.
i got rooted but when i triend to install twrp. it doesnt install neither through loki_flash nor adb sideload.
5. then some how i flashed the recovery through adb.and got access to recovery but i cant install anything beside ioroot.
6.i tried to install flashable rom, baseband or cloudy rom but didnt help . it shows E: footer is wrong , verification failed something like that.
7. when i use fastboot. it didnt recognize my device and show" waiting for device".
i didnt get qhsbulk mode in device manger but i get android lge in adb devices.
i think that i have lost efs partition and boot images.
Access:
have access to download mode, adb shell, stock recovery(side load).
please help me asap.
TWRP issue
i am installing TWRP recovery in my LG G2 D802 (D80210b) but i am getting this error kindly help me to solve the issue.
Flashify...
Can I install TWRP using flashify. ??
If you're on KitKat then - yes you can
Sent from my Nexus 5 using Tapatalk
Critical Error
Please help me! I just flashed with the method 2 and when i rebooted to recovery mode I got this:
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
My phone is working perfect I just don't have recovery!
I reflashed it but nothing!
twrp recovery error
hi there
i have a LG G2 D800 with android 4.4.2 and rom 20y,
some days ago i download TWRP latest version flashable zip file from TWRP site, i extract .img file from zip and flashed that with flashify [root] , but when flash complected phone reboot and goes to Recovery mod, in recovery mod shows 3 error in up side-right [seurce boot failed] and phone stay with a blach screen, dosnt worked . not bricked.
reset factory not response.
now i want to install MIUI 4.4.2 rom, but i havnt any recovery even lg offecial .
i dont now any thing about Adb shel, how ill can repair and install TWRP recovery on my d800 g2??
tnx a lot

ASUS ZENFONE 5 A501CG usb logo problem

Need help Urgent!!!!!!!!
I had rooted my phone successfully 1 year ago but while installing xposed privacy it asked unlock bootloader and changed to twrp recovery 2.8.7.0 but some problem occured i can not go after asus logo so i visited customer care and he installed kitkat 2.22.40.54 version with out locking that bootloader. After succesful usage of 1 year my settings option not opened it always show "unfortunately. com.android settings has stopped" so i tried to flash a new rom i wiped cache and data unfortunately system also.
so that im not able to flash new rom errors occurs are
1. E:unknown file system: 'osip'
E:unknown file system: 'osip'
E:unknown file system: 'osip'
E: Invalid block device on '/dev/block/zram0one......................................
2. E: Unable to locate page (system_readonly)
3. no MD5 file found even i downloaded the firmware from asus support (2.22.40.540 as well as 2.21.40.44)
4. assert failed: getprop("ro.build.asus.sku")=="ww" return code 8
5. E: Error executing updater binary in zip '/external_sd/.....................zip
(** note: i had not enabled usb debugging
when i try to flash rom using adb sideload it is not showing in the list even it is connecting as media transfer
through otg also not going i dont know it is not showing in the recovery)
thats the problem guys please help me out of this
ajay019 said:
Need help Urgent!!!!!!!!
I had rooted my phone successfully 1 year ago but while installing xposed privacy it asked unlock bootloader and changed to twrp recovery 2.8.7.0 but some problem occured i can not go after asus logo so i visited customer care and he installed kitkat 2.22.40.54 version with out locking that bootloader. After succesful usage of 1 year my settings option not opened it always show "unfortunately. com.android settings has stopped" so i tried to flash a new rom i wiped cache and data unfortunately system also.
so that im not able to flash new rom errors occurs are
1. E:unknown file system: 'osip'
E:unknown file system: 'osip'
E:unknown file system: 'osip'
E: Invalid block device on '/dev/block/zram0one......................................
2. E: Unable to locate page (system_readonly)
3. no MD5 file found even i downloaded the firmware from asus support (2.22.40.540 as well as 2.21.40.44)
4. assert failed: getprop("ro.build.asus.sku")=="ww" return code 8
5. E: Error executing updater binary in zip '/external_sd/.....................zip
(** note: i had not enabled usb debugging
when i try to flash rom using adb sideload it is not showing in the list even it is connecting as media transfer
through otg also not going i dont know it is not showing in the recovery)
thats the problem guys please help me out of this
Click to expand...
Click to collapse
Ok so as per my understanding , you have unlocked bootloader .
You also have custom recovery twrp 2.8.7 installed . Right ?
Since you wipe system , your phone is without any os right now .
So now what you do is download any stock modified rom for your device .
Download latest twrp by xanwar . Flash the twrp zip (by xanwar)from twrp 2.8.7 (already installed ).
Voila ! Now you can flash any custom rom or stock based modified roms .
I don't know this is what you asking
Boomshiva said:
Ok so as per my understanding , you have unlocked bootloader .
You also have custom recovery twrp 2.8.7 installed . Right ?
Since you wipe system , your phone is without any os right now .
So now what you do is download any stock modified rom for your device .
Download latest twrp by xanwar . Flash the twrp zip (by xanwar)from twrp 2.8.7 (already installed ).
Voila ! Now you can flash any custom rom or stock based modified roms .
I don't know this is what you asking
Click to expand...
Click to collapse
yes i unlocked bootloader and i have custom recovery twrp 2.8.7.0 installed but here the problem is i didnt enabled usb debugging mode so that i'm not able to flash and the errors are as above mentioned. modified rom you are saying means i'm using 2.22.40.54 kitkat so may i able to install lollipop or higher version.one more thing i dont know what these errors mean..
ajay019 said:
yes i unlocked bootloader and i have custom recovery twrp 2.8.7.0 installed but here the problem is i didnt enabled usb debugging mode so that i'm not able to flash and the errors are as above mentioned. modified rom you are saying means i'm using 2.22.40.54 kitkat so may i able to install lollipop or higher version.one more thing i dont know what these errors mean..
Click to expand...
Click to collapse
Ok . I understand now .
1)donwlaod latest twrp by xanwar . And flash it. So now you have latest recovery installed on your device .:fingers-crossed:
2)download gecko premium rom from Android development section here on xda . Place it on SD card .
3)reboot to recovery , wipe everything except SD card . (You will lose everything from your phone .)
4)if step 3 gives error then format data not wipe .
5)repeat step 3
6)reboot to recovery now .
Flash the rom that you downaoded (gecko premium )
7)reboot system .
8) do this first then report back .
Boomshiva said:
Ok . I understand now .
1)donwlaod latest twrp by xanwar . And flash it. So now you have latest recovery installed on your device .:fingers-crossed:
2)download gecko premium rom from Android development section here on xda . Place it on SD card .
3)reboot to recovery , wipe everything except SD card . (You will lose everything from your phone .)
4)if step 3 gives error then format data not wipe .
5)repeat step 3
6)reboot to recovery now .
Flash the rom that you downaoded (gecko premium )
7)reboot system .
8) do this first then report back .
Click to expand...
Click to collapse
one more mistake bro i didnt find xanwar twrp 3.0.2.0 so i browsed for another one which is 3.0-m-4.0 and flashed it successfully but reboot in recovery is not going then powered off the phone and started to go into recovery mode but in recovery mode touch is not working so only hanged i repeatedly switched off and on but same result. so what to do now.....? i think im having no other choices than using droidboot but adb side load is not working bz i didnt enabled usb debugging mode. in pc it is showing connected to pc until i started adb when i started it disappearing.
ajay019 said:
one more mistake bro i didnt find xanwar twrp 3.0.2.0 so i browsed for another one which is 3.0-m-4.0 and flashed it successfully but reboot in recovery is not going then powered off the phone and started to go into recovery mode but in recovery mode touch is not working so only hanged i repeatedly switched off and on but same result. so what to do now.....? i think im having no other choices than using droidboot but adb side load is not working bz i didnt enabled usb debugging mode. in pc it is showing connected to pc until i started adb when i started it disappearing.
Click to expand...
Click to collapse
I don't understand the logic behind not enabling usb debugging !
No need for all that .
If using windows then make sure the all driver shows up when you enter into fastboot mode .
Check from control panel of your PC . If not then reinstall the drivers . It must show asus composite ...........Blah Blah blah ...Android bridge interface .(well i use Linux so dont recall properly ).
Once the desired drivers are present you are good to go ahead .And flash proper twrp .And do the rest .
Bottom line :check drivers
Flash the latest twrp (24 July build) link below
https://www.androidfilehost.com/?w=files&flid=52033
Boomshiva said:
I don't understand the logic behind not enabling usb debugging !
No need for all that .
If using windows then make sure the all driver shows up when you enter into fastboot mode .
Check from control panel of your PC . If not then reinstall the drivers . It must show asus composite ...........Blah Blah blah ...Android bridge interface .(well i use Linux so dont recall properly ).
Once the desired drivers are present you are good to go ahead .And flash proper twrp .And do the rest .
Bottom line :check drivers
Flash the latest twrp (24 July build) link below
https://www.androidfilehost.com/?w=files&flid=52033
Click to expand...
Click to collapse
thank you bro successfully flashed new rom GECKO-premium-ROM-3.24.40.87-v1.0. problem solved. may i know how to install and activate xposed installer for this version and one more thing may i change the recovery any time with out disturbing os?
ajay019 said:
thank you bro successfully flashed new rom GECKO-premium-ROM-3.24.40.87-v1.0. problem solved. may i know how to install and activate xposed installer for this version and one more thing may i change the recovery any time with out disturbing os?
Click to expand...
Click to collapse
Flash xposed zip . Sdk21 v86 works flawlessly ,
Then download the apk for xposed and install it as normal apk you can change recovery anytime but be sure that you flash your devices twrp only not others .

Bootloop after uninstalling Xposed + Firmware upgrade encountered issue

Hello,
I'm really desperate right now and would highly appreciate your help.
The background is the following:
several months ago I've flashed Cyanogenmod 13 on my Note 3 (N9005) using TWRP (via Odin). The system has been working perfectly. In addition, I was using Xposed (Version 89) without any problems. However I decided to uninstall Xposed today using its uninstaller, but I only got a error message ( I don't remember its content, it was saying something like ' can't rename... /lib'.
Well, I then tried uninstalling via recovery which resulted in a bootloop.
I watched some YT-videos explaining how to bypass Xposed in TWRP, so I went to download mode and tried installing the TWRP with stock_kernel_twrp_1120-signed-for_Odin (the file I used the first time). This step failed. After restarting my phone it's saying: 'Firmware upgrade encountered issue. Please select recovery mode in Kies & try again'.
I don't know what to do now. I simply want to install a working TWRP to save all my files and recover from the bootloop. What matters the most to me is to recover all data on the phone (videos, pictures, files etc. which unfortunately I haven't backed up).
I'm able to access download mode (home/power/volume down) but I don't know what to do to get a recovery/TWRP.
I'm not doing anything right to avoid further harm and wait for your advice. I'd be most grateful if you could help me.
Thanks in advance!
Exupery
exupery09 said:
Hello,
I'm really desperate right now and would highly appreciate your help.
The background is the following:
several months ago I've flashed Cyanogenmod 13 on my Note 3 (N9005) using TWRP (via Odin). The system has been working perfectly. In addition, I was using Xposed (Version 89) without any problems. However I decided to uninstall Xposed today using its uninstaller, but I only got a error message ( I don't remember its content, it was saying something like ' can't rename... /lib'.
Well, I then tried uninstalling via recovery which resulted in a bootloop.
I watched some YT-videos explaining how to bypass Xposed in TWRP, so I went to download mode and tried installing the TWRP with stock_kernel_twrp_1120-signed-for_Odin (the file I used the first time). This step failed. After restarting my phone it's saying: 'Firmware upgrade encountered issue. Please select recovery mode in Kies & try again'.
I don't know what to do now. I simply want to install a working TWRP to save all my files and recover from the bootloop. What matters the most to me is to recover all data on the phone (videos, pictures, files etc. which unfortunately I haven't backed up).
I'm able to access download mode (home/power/volume down) but I don't know what to do to get a recovery/TWRP.
I'm not doing anything right to avoid further harm and wait for your advice. I'd be most grateful if you could help me.
Thanks in advance!
Exupery
Click to expand...
Click to collapse
Flash TWRP 2.8.7.0 via ODIN.
if this works, then backup everything from recovery immediately.
here is the link (if you need).
https://forum.xda-developers.com/ga...ecovery-twrp-materialized-dark-light-t3153589
Now Flash a new kernel. look over here at xda for your need.
then reboot and check. pls have patience if it took long while first boot.
and pls tell if it works.
dark_phoenix said:
Flash TWRP 2.8.7.0 via ODIN.
if this works, then backup everything from recovery immediately.
here is the link (if you need).
https://forum.xda-developers.com/ga...ecovery-twrp-materialized-dark-light-t3153589
Now Flash a new kernel. look over here at xda for your need.
then reboot and check. pls have patience if it took long while first boot.
and pls tell if it works.
Click to expand...
Click to collapse
Thank you very much for your help.
I've just flashed twrp-2.8.7.0-hlte-4.4.img.tar successfully, but when trying to access recovery (volume up/home/power) it's stuck in the Samsung logo saying:
'RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery"
What to do now?
I've found different kernels:
https://forum.xda-developers.com/ga...nt/kernel-idlekernel-leankernel-fork-t3241582
and
https://forum.xda-developers.com/galaxy-note-3/development/temasek-kernel-t3395437
Which should I choose for N9005/Cyanogenmod 13? I have no idea due to lacking knowledge.
[Hlte][Purify][25.02.17][CM13.0]. sounds appropriate to me? Could you please give me an advice? Thank you!
Ok, flashing both twrp-2.8.7.0-ha3g.tar and then twrp-2.8.7.0-hlte-4.4.img.tar resulted in the herein before mentioned problem (stuck on Samsung logo).
I now flashed successfully n9005-cwm-recovery-6.0.4.4 and it's backed up everything.
I then tried uninstalling xposed via recovery with the uninstaller.zip on sdcard, but got this error message:
mv: can't rename '/system/lib/libart.so.o
rig': No such file or directory
E: Error in /data/media/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework/xposed-uninstaller-20180117-arm.zip
Any ideas how to fix it? Or do you recommend wiping everything and flashing a new ROM (e.g. MagMa NX ROM)?
exupery09 said:
Ok, flashing both twrp-2.8.7.0-ha3g.tar and then twrp-2.8.7.0-hlte-4.4.img.tar resulted in the herein before mentioned problem (stuck on Samsung logo).
I now flashed successfully n9005-cwm-recovery-6.0.4.4 and it's backed up everything.
I then tried uninstalling xposed via recovery with the uninstaller.zip on sdcard, but got this error message:
mv: can't rename '/system/lib/libart.so.o
rig': No such file or directory
E: Error in /data/media/0/Android/data/de.robv.android.xposed.installer/cache/downloads/framework/xposed-uninstaller-20180117-arm.zip
Any ideas how to fix it? Or do you recommend wiping everything and flashing a new ROM (e.g. MagMa NX ROM)?
Click to expand...
Click to collapse
ok.
you backed up your necessary data ?
if YES then go ahead and wipe everything and flash a new rom, which ever you want.
you know what. i am a huge fan of this dev.
here is this his work. awesome rom. give it a go.
https://forum.xda-developers.com/galaxy-note-3/development/rom-aspireteam-c9-pro-v2-0-t3610152
or this one if you don't want touchwiz .
https://forum.xda-developers.com/ga...-resurrection-remix-n-v5-8-3-vanilla-t3615227
---------- Post added at 10:43 AM ---------- Previous post was at 10:27 AM ----------
exupery09 said:
Thank you very much for your help.
I've just flashed twrp-2.8.7.0-hlte-4.4.img.tar successfully, but when trying to access recovery (volume up/home/power) it's stuck in the Samsung logo saying:
'RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery"
What to do now?
I've found different kernels:
https://forum.xda-developers.com/ga...nt/kernel-idlekernel-leankernel-fork-t3241582
and
https://forum.xda-developers.com/galaxy-note-3/development/temasek-kernel-t3395437
Which should I choose for N9005/Cyanogenmod 13? I have no idea due to lacking knowledge.
[Hlte][Purify][25.02.17][CM13.0]. sounds appropriate to me? Could you please give me an advice? Thank you!
Click to expand...
Click to collapse
FOR THIS ONE ....
i think you need to pull battery out just after successfully flashing TWRP 2.8.7.0
when ODIN flashes recovery and says passed. pull out battery immediately. don't let the phone boot/start. wait 10-20 seconds. re-insert battery and try now booting in TWRP.

Categories

Resources