Anyone having issue flashing CM11 Official nightly with TWRP?
Tried with both version, 2.6.3.2 and 2.6.3.3. Both failed to complete flash.
didn't work for me. now I can't see my phone in adb or fastboot.
Same... Now stuck on CM boot with no way to get into recovery or power off
you can get into recovery... just push power + volume down..... once it shows LG emblem, release the buttons and then push them again..
it'll show factory reset ... just push the power button 3 times .. it'll then reboot to twrp recovery
I also have problems installing cm11 using twrp v2.6.3.2
(I have done a factory reset).
get the set_metadata_recursive: some changes faild
error executing updater binary in zip '/sdcard/Download/cm-11-20131221-NIGHTLY-d802.zip'
Error flashing zip '/sdcard/Download/cm-11-20131221-NIGHTLY-d802.zip'
Updating partition details...
Anyone having a tip for how i can install the CM11?
upgrade to 2.6.3.3 did the trick for me
zekurosu said:
upgrade to 2.6.3.3 did the trick for me
Click to expand...
Click to collapse
Can u please explain method u used to upgrade twrp I'm stuck on a older build 3.0. Install it with using a app freegee. Thank u.
Sent from my LG-D800 using xda app-developers app
just flash the update zip via recovery
Related
I have TWRP installed and CWM as well but I can only reboot in TWRP even if I flash CWM it will still reboot in TWRP
I tried rebooting in recovery by the volume up+power key but the LG logo just flashes really quick then it reboots normal.
When I try to flash the CWM image using Flashify, it just goes to the black screen and says "fastboot mode started" then I just end up rebooting.
I want to use CWM so I can install Cynogenmod 11 because it doesn't seem to work on TWRP. When I try to install the zip it just says "Error executing binary zip..."
Here's some info about my phone just in case it helps
Android 4.2.2
Kernel: 3.4.0
Build: JDQ39B
Software: LG D80110G
Sent from my LG-D801 using xda app-developers app
lynnnguyen said:
I have TWRP installed and CWM as well but I can only reboot in TWRP even if I flash CWM it will still reboot in TWRP
I tried rebooting in recovery by the volume up+power key but the LG logo just flashes really quick then it reboots normal.
When I try to flash the CWM image using Flashify, it just goes to the black screen and says "fastboot mode started" then I just end up rebooting.
I want to use CWM so I can install Cynogenmod 11 because it doesn't seem to work on TWRP. When I try to install the zip it just says "Error executing binary zip..."
Here's some info about my phone just in case it helps
Android 4.2.2
Kernel: 3.4.0
Build: JDQ39B
Software: LG D80110G
Sent from my LG-D801 using xda app-developers app
Click to expand...
Click to collapse
If you just want to install CM 11, you can do that with the latest version of TWRP (2.6.3.5), which can be found in the CMB Rom thread for T-Mobile Development: http://forum.xda-developers.com/showthread.php?t=2568732 . You should be able to flash that by putting the zip onto your phone and installing it with your current TWRP.
flutterguy317 said:
If you just want to install CM 11, you can do that with the latest version of TWRP (2.6.3.5), which can be found in the CMB Rom thread for T-Mobile Development: http://forum.xda-developers.com/showthread.php?t=2568732 . You should be able to flash that by putting the zip onto your phone and installing it with your current TWRP.
Click to expand...
Click to collapse
I can't flash it. It goes into CWM recovery mode and says that fastboot mode started still
Erm so now you have cwm!?
Your better off with the latest twrp anyway. Just fine the latest version for your phone. 2.6.3.2 is no good.
You can have only 1 recovery at a time.
Sent from my LG-G2 using Tapatalk
Solved!
I figured it out! I was flashing the zip file of the 2.6.3.2 and that's why it didn't work. I flashed the open recovery image file instead using flashify and I was able to get into TWRP recovery mode from there I installed the latest version of TWRP. At first it failed but that was because I had checked the zip verification box and "use rt formatting" or whatever in the advanced settings. Unchecked them and installed successfully :victory: finally I installed CM 11 and it's great
Thanks for the help flutterguy317!
While trying ti install CM 11 from TWRP i managed to brick the phone. I dont want to waste time sharing the details unless it's need to solve the problem. The main thing is that my phone is now stuck at the LG logo. Previously i was running the CM 10.2 Stable Build.
How can i get back to working condition? Either CM or Genuine LG Rom, I just want my phone to be up and running.
Please Help. I am really scared at this moment.
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
muEcke* said:
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
Click to expand...
Click to collapse
I can enter both the modes shown in the video.
The thing is i was running CM 10.2 with a TWRP installed of version 2.6.3.2. I downloaded the CM 11 and went into TWRp to flash it but it couldnt flash the CM11. Then after searching the net i found out that TWRP 2.6.3.3 or higher is required to install CM11. The problem is that i wiped my dalvic, data, cache and system and did not keep a backup. So when the Cm11 wont install i was stuck in the TWRP as i didn not have the 10.2 rom file in the phone.
Then downloaded the TWRP 2.6.3.3 and also a CWM zip (just in case). Using ADB i tried to update the TWRM but still some other error shows up. Tried installing the CWm still some error shows up. i tried installing again and this time the recovery asked me to install superuser (though i was rooted). I selected YES and after that i am boot looping in the lg logo.
Anyways thats basically what happened. Now how do i get further and make my phone work again?
Please help brother. I am in deep trouble.
Thank You
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
muEcke* said:
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
Click to expand...
Click to collapse
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
in_core said:
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
Click to expand...
Click to collapse
So you can't enter the recovery like shown in the video? And the command adb reboot recovery doesn't work either?
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
hellot1M said:
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Ok then i will follow this process and hopefully be successful in getting my phone up and running.
Thanks for the help. Downloading 2Gb will take some time. So will post the result tomorrow.
Regarding rooting and installing custom recovery again, i will do that later. For now i just want my phone alive.
Anyways Thanks again everyone for the helpful information
Try getting to download mode right now. Because if you can't get to download mode you can't use the back to stock method
from my Note Thrizzle
Thanks everyone for the help and support. I have successfully reverted back to Stock LG Firmware.
I have some questions.
1. Do i have root access anymore?
2. Is my previous custom recovery still in my system?
3. If no for both then please help me with the appropriate article to root, install custom recovery and then install CM11, as my previous recovery was not able to install CM 11.
Thank You
Hi i make the mistake of erasing all partitions without backup in philz touch recovery on my lg d803 and now im i can just go in recovery..i flashed twrp 2.6.3.2 and now the phone boot only in twrp..no download mode no rom i flashed a lot of roms but always boot in twrp ..help plz i have no idea what to do ..i can do adb commands...tanxs in advance.
demon66678 said:
Hi i make the mistake of erasing all partitions without backup in philz touch recovery on my lg d803 and now im i can just go in recovery..i flashed twrp 2.6.3.2 and now the phone boot only in twrp..no download mode no rom i flashed a lot of roms but always boot in twrp ..help plz i have no idea what to do ..i can do adb commands...tanxs in advance.
Click to expand...
Click to collapse
If you have ADB access, you are in a good spot.
You'll have to ADB sidelaod a ROM, and flash it. shouldn't be hard to find info on.
Good luck.
congratulations for not saying your bricked.
you probably get an error when flashing right ?!
you need a newer version of twrp... get a flashable zip and update itself in twrp. then you will be able to flash roms.
Yep. darkobas is correct.
I missed your TWRP version. find 2.6.3.3 push it (I mistakenly said sideload above) and a ROM to your 'SDcard', then flash TWRP, restart to recovery, and flash ROM (and any other required packages (Gapps, system patch, etc).
adb push path/filename /sdcard/filename
re
CxanDroid said:
Yep. darkobas is correct.
I missed your TWRP version. find 2.6.3.3 push it (I mistakenly said sideload above) and a ROM to your 'SDcard', then flash TWRP, restart to recovery, and flash ROM (and any other required packages (Gapps, system patch, etc).
adb push path/filename /sdcard/filename
Click to expand...
Click to collapse
sorry but i try it and no matter what the phone is always restarting in twrp no download mode no system no nothing everytime rebooting in recovery twrp 2.6.3.3
So.... Twrp is fine... Flash a rom now
Sent from my LG-D802 using Tapatalk
I'm running ResurrectionRemix-M-v5.6.5-20160316 with the latest TWRP recovery and Xposed.
The last time I used the recovery was on 22/03 to make a backup of my ROM (I've entered the recovery more than a dozen times before this backup with no issues).
Today I wanted to switch from Ressurrection Remix to crDroid (Ressurrection for some reason becomes laggy after use and only a reboot resolves this issue).
I downloaded all of the zips I required (ROM, GAPPS, SU etc.)
I selected to reboot to recovery using the advanced reboot option.
The phone rebooted and displayed recovery booting in blue as per the norm.
The TWRP splash screen showed for around 10 sec or so then the phone rebooted (this never happened before).
Thinking that this was a bug with the recovery, I tried turned off the phone via the power menu once my I got into MM and then removed the battery and used the power + up button combo to enter recovery however still no go.
Next I tried flashing the TWRP 3.0.0.tar file via odin, still no luck.
The question I have is how do I resolve the issue?
Try flashing a different version of TWRP.
Or flash an twrp.img file via the app Flashify.
Ok to downgrade?
GDReaper said:
Try flashing a different version of TWRP.
Or flash an twrp.img file via the app Flashify.
Click to expand...
Click to collapse
So it's ok to downgrade to say 2.8.60 with F2FS support?
Fixed!!!
jdhot2 said:
So it's ok to downgrade to say 2.8.60 with F2FS support?
Click to expand...
Click to collapse
I found a custom version of the recovery made by the JDC team http://forum.xda-developers.com/gal.../jdcteam-twrp-touch-recovery-3-0-0-0-t3312115.
I flashed the recovery using flashify.
All fixed now
I updated the EMUI version on my ALE-L02 from 3.1 to 4.1 using TWRP recovery. The disadvantage of this is that I lost TWRP afterwards as it was replaced by the stock recovery.
I tried to flash TWRP to the phone again using ADB, which said that the flash was successful. However, when rebooting into recovery mode, it boots into the stock recovery. Why is it doing this/how do I fix it?
You need to follow the instructions to get TWRP to boot after install. https://forum.xda-developers.com/showpost.php?p=71429023&postcount=73
JpegXguy said:
You need to follow the instructions to get TWRP to boot after install. https://forum.xda-developers.com/showpost.php?p=71429023&postcount=73
Click to expand...
Click to collapse
Thanks! Will try later on
mackelbot said:
I updated the EMUI version on my ALE-L02 from 3.1 to 4.1 using TWRP recovery. The disadvantage of this is that I lost TWRP afterwards as it was replaced by the stock recovery.
I tried to flash TWRP to the phone again using ADB, which said that the flash was successful. However, when rebooting into recovery mode, it boots into the stock recovery. Why is it doing this/how do I fix it?
Click to expand...
Click to collapse
Try just pressing vol. up+ power, that happened to me sometimes. Also, as a tip, when flashing EMUI from TWRP first backup recovery than flash it. After that, don't reboot, go back and restore the recovery. Much easier for me.