Related
Hello all. I am new to this site but I enjoy it a lot and I learned a lot as well from the threads. I got AIO wireless service that has the I337 model galaxy s4. I successfully rooted my phone with Kingo root. After rooting my phone I tried to install a customer recovery on it with no success no matter what I did ( I tried every imaginable scenario). In the process of rooting my phone my kernel got damaged and my Wi-Fi stopped working. I am trying to re flash the phone with custom multi carrier rom but I think that my boot loader is locked and that is the reason I can’t install the recovery. If anyone can guide me in the right direction where I can unlock the boot loader would be amazing. Thank you all in advance
1. This section isn't for AIO wireless but I don't know if there is a section for it.
2. There is currently no way to unlock the boot loader.
3. If you want to restore it back to stock read about it in my signature.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
4tele said:
Hello all. I am new to this site but I enjoy it a lot and I learned a lot as well from the threads. I got AIO wireless service that has the I337 model galaxy s4. I successfully rooted my phone with Kingo root. After rooting my phone I tried to install a customer recovery on it with no success no matter what I did ( I tried every imaginable scenario). In the process of rooting my phone my kernel got damaged and my Wi-Fi stopped working. I am trying to re flash the phone with custom multi carrier rom but I think that my boot loader is locked and that is the reason I can’t install the recovery. If anyone can guide me in the right direction where I can unlock the boot loader would be amazing. Thank you all in advance
Click to expand...
Click to collapse
seedeh said:
1. This section isn't for AIO wireless but I don't know if there is a section for it.
2. There is currently no way to unlock the boot loader.
3. If you want to restore it back to stock read about it in my signature.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
This section is for all I337 variants. He has a different model than the AT&T I337, so that restore tar in your signature won't work and the bootloader may be unlocked for him depending on his carrier's choice.
EDIT: Here is the I337Z stock firmware. http://forum.xda-developers.com/showthread.php?t=2448794
It says they did not get a recovery working, you may be stuck to Safestrap 3.65
DeadlySin9 said:
This section is for all I337 variants. He has a different model than the AT&T I337, so that restore tar in your signature won't work and the bootloader may be unlocked for him depending on his carrier's choice.
EDIT: Here is the I337Z stock firmware. http://forum.xda-developers.com/showthread.php?t=2448794
It says they did not get a recovery working, you may be stuck to Safestrap 3.65
Click to expand...
Click to collapse
Ah. He said I337Z in the title but not the post so I was confused.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Thank you
I guess I need to do some more reading about safe strap...If you could point me in the right direction..it would be good...:good:
My phone is i337z
I Typed my mistake i337 in the body of the message.
Got my Phone to work with safestrap
Thank you again! I got my phone to work with safe strap 3.65! I loaded the Intika Locky S4 Rom v1.0 everything seems to work :good:
4tele said:
Thank you again! I got my phone to work with safe strap 3.65! I loaded the Intika Locky S4 Rom v1.0 everything seems to work :good:
Click to expand...
Click to collapse
4tele, I assume you used the AT&T Safestrap? I was not able to get AT&T Safestrap 3.65, 3.71, or 3.72 to work on my I337Z from Cricket (AIO) with KitKat 4.4.2, build number KOT49H.I337ZTUUBNE2. The app says it installed successfully, but it never seems to activate. Are you on KitKat? If so, what build number?
Anyone know if it's possible to flash the AT&T I337 MF3 firmware on the I337Z then try to unlock the bootloader using the process described below? http://forum.xda-developers.com/showthread.php?t=2387577
I used the AT&T safestap 3.65 but my phone was on MH1 firmware 4.2.2 and it worked, if you are on kitkat probably need to use the latest safestap I guess
guys check this out , maybe one developer decides to take advantage of this and help us out http://www.droid-life.com/2014/08/07/moto-x-bootloader-unlock-qualcomm/
Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Suprr said:
Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Click to expand...
Click to collapse
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
jmjoyas said:
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
Click to expand...
Click to collapse
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Suprr said:
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Click to expand...
Click to collapse
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Jmjoyas told me to flash the full tar version and No I do not.
Suprr said:
Jmjoyas told me to flash the full tar version and No I do not.
Click to expand...
Click to collapse
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
To be frank, I have not a clue of what any of those are.
Suprr said:
To be frank, I have not a clue of what any of those are.
Click to expand...
Click to collapse
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am flashing it right now. Let's hope it works.
EDIT:
Flashed the full tar version for mk2 to no avail via Odin
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
I flashed from this thread and this line:
http://forum.xda-developers.com/showthread.php?t=2700726
To return to factory stock MK2 flash the I337_MK2_Full_Odin tar
Click to expand...
Click to collapse
Suprr said:
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
Click to expand...
Click to collapse
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I love you. thank you so much.
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Suprr said:
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Click to expand...
Click to collapse
You're on mk2 firmware now. You'll need to root it using safe root and then put safestrap on in order to flash that rom. Look in the general forum for index, all thing mk2 and nb1. There's a lot of info there so read it carefully
Sent from my Nexus 5 using XDA Free mobile app
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
RockRatt said:
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Click to expand...
Click to collapse
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
patstar5 said:
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
Click to expand...
Click to collapse
There's one partially working Google Play edition rom, but otherwise, no.
This makes me truly sad. I was so looking forward to possibly flashing these ROMS and now...I have to get it my time machine and go backwards lol whenever I find the time to figure the downgrading thing out. Sounds to me like I'll be happier when I do find the time.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
There is no way going back to the older bootloader. The only way to go back would be to find an older S4 on eBay etc. with the old BL
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
All the post below are correct except being able to go back to firmware with an unlocked boot loader.. Install safestrap 3.72 and install recovery. You will get a Twrp recovery .. dont try flashing custom kernels ..It might flash but none of the setting such as overclock etc. will work .nor will you be on that kernel version afterwrds .. I guess the simple answer is no for cwm and aosp roms .. You will be only able too flash custom stock roms
Wifi issues with towelrooted gs4
First off this may not be the right place for this (first time poster), and if so, either please help me in finding the right forum or forgive my ignorance.
I rooted my galaxy s4 today, and I have found that when I am trying to use wifi I am unable to connect to some pages. Using chrome I am unable to load google.com, or google anything directly from the search bar. And the app imgur also doesn't load whilst on wifi, but if I switch to my cell network they load just fine. If I had unlimited data of course this would not be an issue, but that is not the case and therefore I come to this forum and hope that someone can help me out!
My s4 is an at&t i337. I would amazingly, greatly appreciate any help!
Much thanks in advance!
lost recovery with unlocked bootloader
Hello,
longtime flasher here, not as familiar with gs4.
My girl has a sgh-i337 that has been bootloader unlocked since day one. Been on TWRP and slim rom the whole time too.
I was wiping Cache, Dalvik Cache, and System prior to doing a rom update and TWRP glitched out while updating partition after the final wipe operation. Screen went black. Boots to download mode only.Will not boot rom (as system was wiped) but shows the samsung custom unlocked logo. When in download (odin) mode, I see product name: sgh-1337, Current Binary: Samsung Official, System Status: Custom CSB_OEM_LSB: 0x30 Write Protection: enable
universal android toolkit will not show device connected so Installation of custom recovery through toolkit fails. ADB will not show device connected. ODIN will show device connected, though.
To recover with odin, can I flash the I337UCUAMDL from sammobile and retain unlocked bootloader?
Thanks for any and all help.
What is the bootloader version you need to unlock? I have 4.2.2 Red ATT S4, Baseband Version : I337UCUAMF3 / BUILD: JDQ39 , if i was able to unlock how would i go about doing so? I was hoping i could do something with Loki if not? How does Loki work exactly as well?
Congrats, you just voided your warranty. It will be 0x1 instead of 0x0.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Just FYI for you guys hijacking the thread. It is usually better for you if you start your own thread. Most people skim these threads and may lose track of who they were helping or give bad info to you thinking they were replying to the original question. Or, just skip the thread if they don't think the OP tiltle interests them.
You will get more direct answers and quicker help if you do. Or try to post here--
http://forum.xda-developers.com/showthread.php?t=2320430
Just trying to get you faster and more accurate responses--:good:
How did you root S4?
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
th3doorMATT said:
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Using Odin 3.10
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
th3doorMATT said:
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
Click to expand...
Click to collapse
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
Hmmm. I still don't know why it fails but when I get home I'll have to let you know. I've deleted several after failing. I'm sure I can find them again and I think I still have a few as well so I'll let you know.
CF Auto Root and Towelroot
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I've used both CF Auto Root, Towelroot, and Motochopper guides and none of them have worked.
The only file I have on my computer is: philz_touch_6.08.9-jflteatt.tar.md5 as one of the files I used but that didn't work. I actually had already downloaded the files from the article you had linked but I didn't get around to it yet, I'm going to try that method out in about 15-30mins and see what happens.
It worked!
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Followed everything on that post and it worked! I'm rooted!
Though I'm not sure if you know about custom recoveries. I'm having issues with installing any of them and having it work. I am currently trying Safestrap and for some reason it won't install the recovery. It'll go through the process, but the state of the recovery won't change or anything.
I ultimately want to install CM11, but I'm really struggling to find a way that works!
unlocked bootloader.....
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
I still can't figure how to install the .apk file from kingroot..? How do you install the file to root it..?
Hey all, I just acquired the SGH-I337 as an upgrade to my Galaxy S3. I can not for the life of me get a custom ROM running on it. My goal is SlimKAT because I like the ROM and have been using it on every phone since my Samsung Vibrant. Any time I'm flashing something in ODIN that has anything to do with ABOOT, it fails, soft bricks the device, and I have to reflash in ODIN all over again.
Please let me know what information I can provide to help with this. I've never had so much trouble with a phone before.
zeusakatkm said:
Hey all, I just acquired the SGH-I337 as an upgrade to my Galaxy S3. I can not for the life of me get a custom ROM running on it. My goal is SlimKAT because I like the ROM and have been using it on every phone since my Samsung Vibrant. Any time I'm flashing something in ODIN that has anything to do with ABOOT, it fails, soft bricks the device, and I have to reflash in ODIN all over again.
Please let me know what information I can provide to help with this. I've never had so much trouble with a phone before.
Click to expand...
Click to collapse
Please tell us the firmware of your phone (baseband, modem, etc..)
I337 has locked bootloader if your firmware is MF3 and above (MK2, NB1, NC1). You have to use the safestrap as a recovery if you want to flash the custom roms. If you want to flash SlimKAT you have to the SlimKAT safestrap version if they have one.
If he had to use Safestrap he can't use Slimkat as it's AOSP and he can't change the kernel. Chances are if he was getting issues flashing aboot then he's on a newer version. Confirm it in the about phone section of the settings though.
Sent from my SGH-I337 running GPE
I believe when I got the phone, it was updated all the way. Although I'm not entirely sure what the latest firmware is. I tried using Odin to go back, which worked sort of
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
zeusakatkm said:
I believe when I got the phone, it was updated all the way. Although I'm not entirely sure what the latest firmware is. I tried using Odin to go back, which worked sort of
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can't go back to older bootloaders ever. Sounds like you are updated to something that you can't flash custom anything to. So safestrap is the only way to go with modded touchwiz based roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
drock212 said:
You can't go back to older bootloaders ever. Sounds like you are updated to something that you can't flash custom anything to. So safestrap is the only way to go with modded touchwiz based roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was able to successfully unbrick the phone by using Odin to get it to MK2, although Wifi didn't work. Now I'm trying to get it back to the latest firmware so that I can sell it.
UPDATE!
Phone had been successfully reflashed to firmware NB1, with everything seemingly working. This phone seems so much more complicated than the S3 was, thanks locked bootloader.
zeusakatkm said:
I was able to successfully unbrick the phone by using Odin to get it to MK2, although Wifi didn't work. Now I'm trying to get it back to the latest firmware so that I can sell it.
UPDATE!
Phone had been successfully reflashed to firmware NB1, with everything seemingly working. This phone seems so much more complicated than the S3 was, thanks locked bootloader.
Click to expand...
Click to collapse
use this to get to the NB1 firmware then take the NC1 OTA
http://forum.xda-developers.com/showthread.php?t=2674223
shamelin73 said:
use this to get to the NB1 firmware then take the NC1 OTA
http://forum.xda-developers.com/showthread.php?t=2674223
Click to expand...
Click to collapse
Does it matter if I use the rootable version?
I would use the non root one then let phone take the NC1 OTA update.
That shod give you a clean slate to sell the phone or you can root NC1 with towelroot
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I've already flashed the stock one, but it says there is no software update available
I've already flashed the stock one, but it says there is no software update available
UPDATE!
Success! I am successfully running this rom
http://forum.xda-developers.com/showthread.php?t=2767026
So, I was on the journey to rooting my S5, and I seem to have run into a block in the road.
The issue: My phone gets stuck at the 'Samsung Galaxy S5' screen when being rebooted/turned on. After sitting there for a while, it goes into recovery mode.
The cause: In order to root my phone using Towelroot, I was told that I would have to flash my OS back to 4.4.2 (it is currently up-to-date). When I tried flashing it back using Odin, the transition was a failure. I was then told that I would need to switch my kernel to the ncg version, which I proceeded to do by following a guide on these forums, also using Odin. Odin said that the transition was a success, but now my phone won't turn on and I am being faced with the aforementioned issue.
Am I screwed? I'm assuming that I'm not, seeing as my phone definitely isn't hard-bricked. How can I fix this?
Thanks in advance for responses!
Download the stock firmware and flash that then start over
Sent from my SM-G900V using XDA Free mobile app
Use the full odin tar for NCG.
http://forum.xda-developers.com/showthread.php?t=2784880
Tulsadiver said:
Use the full odin tar for NCG.
http://forum.xda-developers.com/showthread.php?t=2784880
Click to expand...
Click to collapse
I had been running rooted NI2 for a long time, never went up to 5.0.x ... Had to get a warranty replacement that I just got yesterday and it came witih BOE1. From what I have found so far, it looks like I am borked and locked out from any hope of rooting or moving back down the chain?
Chopstix9 said:
I had been running rooted NI2 for a long time, never went up to 5.0.x ... Had to get a warranty replacement that I just got yesterday and it came witih BOE1. From what I have found so far, it looks like I am borked and locked out from any hope of rooting or moving back down the chain?
Click to expand...
Click to collapse
There is always a possibility of root in the future but as of now, no. And no, you can't go back. S5's aren't worth as much as they were. I, personally would sell this on swappa and then buy one on swappa with a different build.
Veid71 said:
Download the stock firmware and flash that then start over
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Where could I find the stock firmware? I already downloaded what I thought was the stock firmware, and Odin said that the flash wasn't successful. I've tried downloading the most recent OE1, and 4.4.2, and everything just shows up as a failure.