I just picked up a Note 3 and I'm looking to root my phone without tripping Knox. It seems the root de la vega method is the way to go. My phone is activated and came with MI5, but its downloaded an update which I'm holding off on installing until I know what I'm doing.
Should I go ahead and apply the latest update, and then root, or should I root now and update later?
What exactly are the AP and CSC files and where can I get them? Most of the tutorials I am reading that have links to these files are using HOTFILE which isn't in operation at the moment, so I'm not exactly sure what I'm looking for.
Dont update
Do ×#1234# in dialer and send screenshot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Dont update
Do ×#1234# in dialer and send screenshot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
AP is N900PVPUBMI5
CSC is N900PSPTBMI5
Sammobile.com/firmwares
Type in n900pspt
Download latest fw
Downlaod urdlv
Modify Firmware with urdlv
Flash with odin v3.09
Do the files to internal sd card part (in the universal root de la vega thread)
Enjoy root
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Sammobile.com/firmwares
Type in n900pspt
Download latest fw
Downlaod urdlv
Modify Firmware with urdlv
Flash with odin v3.09
Do the files to internal sd card part (in the universal root de la vega thread)
Enjoy root
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Thanks, SamMobile was using Hotfile though so the firmwares aren't available at the moment.
Oh so you will have to wait
EDIT: you can try sam updates or sam firmware
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Related
please help me, I was messing with my Note 3's CSC and now I'm on BMJ1 CSC. how can I go back to my stock CSC (MJ4 was the last 3 letters of the CSC)
×#1234#
Write down the csc on piece of paper
Www.sammobile.com/firmwares
Type in the csc minus the last 4 letters
Download the file ending with mj4
Either flash the full file or untar it and buile a tar.md5 with only cache.img.ext4
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
×#1234#
Write down the csc on piece of paper
Www.sammobile.com/firmwares
Type in the csc minus the last 4 letters
Download the file ending with mj4
Either flash the full file or untar it and buile a tar.md5 with only cache.img.ext4
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Hi
Can I go from MJ4 to MJ1 with this same method?
1sagain said:
Hi
Can I go from MJ4 to MJ1 with this same method?
Click to expand...
Click to collapse
Nope you cannot downgrad from mj4, as it contains a new bootlaoder which prevents it.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Nope you cannot downgrad from mj4, as it contains a new bootlaoder which prevents it.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Hey Thank you Last question though. is this the same firmware though? I am using the SM-N900W8 I am guess it is the same but just making sure.
N900W8VLUBMJ4_N900W8OYABMJ4_TLS.zip Current
N900W8VLUBMJ1_N900W8OYABMJ1_TLS.zip Want to Flash to
1sagain said:
Hey Thank you Last question though. is this the same firmware though? I am using the SM-N900W8 I am guess it is the same but just making sure.
N900W8VLUBMJ4_N900W8OYABMJ4_TLS.zip Current
N900W8VLUBMJ1_N900W8OYABMJ1_TLS.zip Want to Flash to
Click to expand...
Click to collapse
This will NOT work.
You can try if you want (wonr trip knox or anything) but ull get bootlooped, better do a good backup.
Once u realized i was right, just reflash mj4 and evrthing will be fine again.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
This will NOT work.
You can try if you want (wonr trip knox or anything) but ull get bootlooped, better do a good backup.
Once u realized i was right, just reflash mj4 and evrthing will be fine again.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Haha Thanks. I will move forward instead.
1sagain said:
Haha Thanks. I will move forward instead.
Click to expand...
Click to collapse
Haha pleasure to help
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Hello, Looking for some gigantic help.
Was on Vodafone MI7, Rooted with URDLV-Knox 0X0
Then, use Mobile ODin v3.85 to upgrade MJ7, with MI7 bootloader- Knox still 0X0
But Today, needed Warranty for button fix, So Still on MJ7(with MI7 bootloader) I used Mobile Odin to flash MI7 stock and now....
Baseband Unknown....System Process isn't responding.......Constant Reboots after ~1mins
So can someone guide me to fix this problem with Knox not tripping....as My Knox is still 0X0...
Thank you.
Try to flash mi7 stock with odin 3.09 (pc version)
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Try to flash mi7 stock with odin 3.09 (pc version)
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Hi I tried that, it flashed but problem still persist.
Did u do a factory restet?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Did u do a factory restet?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
yes but only via the phone
How about packing mj7 without bootlaoder and flash this?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
How please?
Sent from my HUAWEI Y300-0100 using Tapatalk 2
PREPARE:
NON-HLOS.bin
boot.img
cache.img.ext4
hidden.img.ext4
modem.bin
recovery.img
system.img.ext4
#extracted from mj7 original firmware
HOW TO:
install cygwin64 (with all default)
start it once
go to c:/cygwin/home/
put mentioned files there
in cygwin:
tar -H ustar -c NON-HLOS.bin boot.img cache.img.ext4 hidden.img.ext4 modem.bin recovery.img system.img.ext4 > DMJ7.tar
md5sum -t DMJ7.tar >> DMJ7.tar
mv DMJ7.tar DMJ7.tar.md5
-> flash generated file
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Thx will try this and see.
Hi I am having difficulties, can give me exact step by steps including command in CW.
why dont you flash the stock rom back using normal odin?
or even better, unroot with supersu and flash only the baseband back
Hi do you flash baseband and kernel in AP?
ddogishere said:
Hi I am having difficulties, can give me exact step by steps including command in CW.
Click to expand...
Click to collapse
what step exactly?
how far do u get?
Ok so I put mj7.tar in cygwin home then type what exactly in cygwin command....
The problem you're having is because the modem can't be downgraded once you've gone over a certain version (MJ3 I think it was) that is reason, the solution is to do what has been suggested but you're going to have to stick with the version that the modem came with.
I know this from the testing I did that discovered the other required files when @BlueChris originally reported problem with no Wi-Fi on the newer firmwares a while ago.
Sent from my SM-N9005 using Tapatalk
So cook mj7.tar?
ddogishere said:
Hi I am having difficulties, can give me exact step by steps including command in CW.
Click to expand...
Click to collapse
What step exactly? How far do y get?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
What step exactly? How far do y get?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Yeah it worked but WiFi not working so now what...
RavenY2K3 said:
The problem you're having is because the modem can't be downgraded once you've gone over a certain version (MJ3 I think it was) that is reason, the solution is to do what has been suggested but you're going to have to stick with the version that the modem came with.
I know this from the testing I did that discovered the other required files when @BlueChris originally reported problem with no Wi-Fi on the newer firmwares a while ago.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yeah it worked but WiFi not working so now what...
ddogishere said:
Yeah it worked but WiFi not working so now what...
Click to expand...
Click to collapse
Put the phone into download mode and with Odin (PC) flash the NON-HLOS file.
You'll be working again as soon as it fires up.
P.S. that file is in the official Samsung firmware file, just extract it.
Note 3 user trying to help out his friend
I debranded my note 3 form tmobile (dtm) to unbranded (dbt) and it DID NOT wipe
Will it wipe if i flassh latest german 4.3 android over current latest tmobile (dtm) 4.2.2 android on a S IV ?
What odin version to take? v3.09 like on my note 3?
Any help appreciated
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Bump
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Oh come on, someone must know/have tried that...
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
BUMP
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Note 3 user trying to help out his friend
I debranded my note 3 form tmobile (dtm) to unbranded (dbt) and it DID NOT wipe
Will it wipe if i flassh latest german 4.3 android over current latest tmobile (dtm) 4.2.2 android on a S IV ?
What odin version to take? v3.09 like on my note 3?
Any help appreciated
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Yes. The data partition will be formatted if you install a stock rom through Odin.
Skipjacks said:
Yes. The data partition will be formatted if you install a stock rom through Odin.
Click to expand...
Click to collapse
U sure? Cuz it didnt on my note 3...
Can i only flash another csc from same FW version?
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Apologies if I am posting in the wrong place, but I am new to all this! Have been researching all the forums but can't find an answer. How do I root my Note 3 with URDLV2 without triggering knox. My firmware details are below:
AP: N9005XXUDMJ6
CP: N9005XXUDMJ4
CSC: N9005VFGDMJ1
Will massively appreciate your help!
Thanks
Impossible as you have the patched bootloader
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
?
Is there no way of reverting back to an older firmware then rooting it?? Sorry I am new to all this
Killberty said:
Impossible as you have the patched bootloader
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
enrules said:
Is there no way of reverting back to an older firmware then rooting it?? Sorry I am new to all this
Click to expand...
Click to collapse
nope
enrules said:
Is there no way of reverting back to an older firmware then rooting it?? Sorry I am new to all this
Click to expand...
Click to collapse
Sorry for you but no.
You have to trip knox or wait for a hack if u want to enjoy root
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
i have decided to flash modem and followed the instructions and successfully change from mj1 to mj7.... but i have one more question...can anybody tell me what is this NON-HLOS? is it neccessary to flash this file through odin and how does it works? i search on gogole and also used the search button here but still cannot find the answers...
Ppl call it modem2, just flash it in cp slot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app