Hello, Looking for some gigantic help.
Was on Vodafone MI7, Rooted with URDLV-Knox 0X0
Then, use Mobile ODin v3.85 to upgrade MJ7, with MI7 bootloader- Knox still 0X0
But Today, needed Warranty for button fix, So Still on MJ7(with MI7 bootloader) I used Mobile Odin to flash MI7 stock and now....
Baseband Unknown....System Process isn't responding.......Constant Reboots after ~1mins
So can someone guide me to fix this problem with Knox not tripping....as My Knox is still 0X0...
Thank you.
Try to flash mi7 stock with odin 3.09 (pc version)
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Try to flash mi7 stock with odin 3.09 (pc version)
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Hi I tried that, it flashed but problem still persist.
Did u do a factory restet?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Did u do a factory restet?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
yes but only via the phone
How about packing mj7 without bootlaoder and flash this?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
How please?
Sent from my HUAWEI Y300-0100 using Tapatalk 2
PREPARE:
NON-HLOS.bin
boot.img
cache.img.ext4
hidden.img.ext4
modem.bin
recovery.img
system.img.ext4
#extracted from mj7 original firmware
HOW TO:
install cygwin64 (with all default)
start it once
go to c:/cygwin/home/
put mentioned files there
in cygwin:
tar -H ustar -c NON-HLOS.bin boot.img cache.img.ext4 hidden.img.ext4 modem.bin recovery.img system.img.ext4 > DMJ7.tar
md5sum -t DMJ7.tar >> DMJ7.tar
mv DMJ7.tar DMJ7.tar.md5
-> flash generated file
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Thx will try this and see.
Hi I am having difficulties, can give me exact step by steps including command in CW.
why dont you flash the stock rom back using normal odin?
or even better, unroot with supersu and flash only the baseband back
Hi do you flash baseband and kernel in AP?
ddogishere said:
Hi I am having difficulties, can give me exact step by steps including command in CW.
Click to expand...
Click to collapse
what step exactly?
how far do u get?
Ok so I put mj7.tar in cygwin home then type what exactly in cygwin command....
The problem you're having is because the modem can't be downgraded once you've gone over a certain version (MJ3 I think it was) that is reason, the solution is to do what has been suggested but you're going to have to stick with the version that the modem came with.
I know this from the testing I did that discovered the other required files when @BlueChris originally reported problem with no Wi-Fi on the newer firmwares a while ago.
Sent from my SM-N9005 using Tapatalk
So cook mj7.tar?
ddogishere said:
Hi I am having difficulties, can give me exact step by steps including command in CW.
Click to expand...
Click to collapse
What step exactly? How far do y get?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
What step exactly? How far do y get?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Yeah it worked but WiFi not working so now what...
RavenY2K3 said:
The problem you're having is because the modem can't be downgraded once you've gone over a certain version (MJ3 I think it was) that is reason, the solution is to do what has been suggested but you're going to have to stick with the version that the modem came with.
I know this from the testing I did that discovered the other required files when @BlueChris originally reported problem with no Wi-Fi on the newer firmwares a while ago.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yeah it worked but WiFi not working so now what...
ddogishere said:
Yeah it worked but WiFi not working so now what...
Click to expand...
Click to collapse
Put the phone into download mode and with Odin (PC) flash the NON-HLOS file.
You'll be working again as soon as it fires up.
P.S. that file is in the official Samsung firmware file, just extract it.
Related
Hi Guys,
I have a N9005 with XXUDMJ7 software I'm trying to change the modem baseband to N9005XXUBMI6 which is the one used by all Australian carriers. When trying to flash the modem.bin for the UBMI6 from DjeMBeY's thread the phone just boot loops with no baseband/reception. I was able to get the phone up and running again flashing N9005-2modems-DMJ7-RomDMJ7.tar.md5 that someone had posted in the thread. So the phone seems 100% operational again but id still like to get the N9005XXUBMI6 modem up and running if possible.
Any suggestions?
I have tried everything below MJ7 Modem and the result is the same , bootloops and unknown baseband. What I guess is that once you update you can't downgrade :/
Sent from my Note 3 powered by Omega v3.1
Vocaloid fan? Check out this thread!
No one else can offer any insight?
Can you post a link for:
N9005-2modems-DMJ7-RomDMJ7.tar.md5
?
Edit:
http://forum.xda-developers.com/showthread.php?t=2475714&page=12
found it
Sorry to tell you but i will not work at all. Dmj7 prevents you from downgrading full fw or onl parts of it...
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Sorry to tell you but i will not work at all. Dmj7 prevents you from downgrading full fw or onl parts of it...
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
I see, just like the S4 than once you had the newer 4.3 boot loader you couldnt use old modems/software.
Exactly
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
please help me, I was messing with my Note 3's CSC and now I'm on BMJ1 CSC. how can I go back to my stock CSC (MJ4 was the last 3 letters of the CSC)
×#1234#
Write down the csc on piece of paper
Www.sammobile.com/firmwares
Type in the csc minus the last 4 letters
Download the file ending with mj4
Either flash the full file or untar it and buile a tar.md5 with only cache.img.ext4
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
×#1234#
Write down the csc on piece of paper
Www.sammobile.com/firmwares
Type in the csc minus the last 4 letters
Download the file ending with mj4
Either flash the full file or untar it and buile a tar.md5 with only cache.img.ext4
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Hi
Can I go from MJ4 to MJ1 with this same method?
1sagain said:
Hi
Can I go from MJ4 to MJ1 with this same method?
Click to expand...
Click to collapse
Nope you cannot downgrad from mj4, as it contains a new bootlaoder which prevents it.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Nope you cannot downgrad from mj4, as it contains a new bootlaoder which prevents it.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Hey Thank you Last question though. is this the same firmware though? I am using the SM-N900W8 I am guess it is the same but just making sure.
N900W8VLUBMJ4_N900W8OYABMJ4_TLS.zip Current
N900W8VLUBMJ1_N900W8OYABMJ1_TLS.zip Want to Flash to
1sagain said:
Hey Thank you Last question though. is this the same firmware though? I am using the SM-N900W8 I am guess it is the same but just making sure.
N900W8VLUBMJ4_N900W8OYABMJ4_TLS.zip Current
N900W8VLUBMJ1_N900W8OYABMJ1_TLS.zip Want to Flash to
Click to expand...
Click to collapse
This will NOT work.
You can try if you want (wonr trip knox or anything) but ull get bootlooped, better do a good backup.
Once u realized i was right, just reflash mj4 and evrthing will be fine again.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
This will NOT work.
You can try if you want (wonr trip knox or anything) but ull get bootlooped, better do a good backup.
Once u realized i was right, just reflash mj4 and evrthing will be fine again.
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Haha Thanks. I will move forward instead.
1sagain said:
Haha Thanks. I will move forward instead.
Click to expand...
Click to collapse
Haha pleasure to help
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
I just picked up a Note 3 and I'm looking to root my phone without tripping Knox. It seems the root de la vega method is the way to go. My phone is activated and came with MI5, but its downloaded an update which I'm holding off on installing until I know what I'm doing.
Should I go ahead and apply the latest update, and then root, or should I root now and update later?
What exactly are the AP and CSC files and where can I get them? Most of the tutorials I am reading that have links to these files are using HOTFILE which isn't in operation at the moment, so I'm not exactly sure what I'm looking for.
Dont update
Do ×#1234# in dialer and send screenshot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Dont update
Do ×#1234# in dialer and send screenshot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
AP is N900PVPUBMI5
CSC is N900PSPTBMI5
Sammobile.com/firmwares
Type in n900pspt
Download latest fw
Downlaod urdlv
Modify Firmware with urdlv
Flash with odin v3.09
Do the files to internal sd card part (in the universal root de la vega thread)
Enjoy root
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Sammobile.com/firmwares
Type in n900pspt
Download latest fw
Downlaod urdlv
Modify Firmware with urdlv
Flash with odin v3.09
Do the files to internal sd card part (in the universal root de la vega thread)
Enjoy root
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Thanks, SamMobile was using Hotfile though so the firmwares aren't available at the moment.
Oh so you will have to wait
EDIT: you can try sam updates or sam firmware
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
i have decided to flash modem and followed the instructions and successfully change from mj1 to mj7.... but i have one more question...can anybody tell me what is this NON-HLOS? is it neccessary to flash this file through odin and how does it works? i search on gogole and also used the search button here but still cannot find the answers...
Ppl call it modem2, just flash it in cp slot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
anybody how to solved note 3
N900XXUCMK2 wifi problem after
rooting CF-Auto-Root-ha3g-ha3gxx-smn900
wife no toggle option to on/off..
tia
Reflash stock and then reflash cf autoroot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Reflash stock and then reflash cf autoroot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
thanks for reply me i try feedback you laterany result...
Be sure that you have selected AP in Odin when you flash and not CP. (This was my reason on SM-900w8)
Thank you but post was Four years ago .
JJEgan said:
Thank you but post was Four years ago .
Click to expand...
Click to collapse
I just noticed this xD
Srry..