Hey can anyone give me flashable file of stock ddla1 galaxy Y or just tell me that can i flash any other deodexed baseband zip in my DDLA1 baseband???
SENT FROM MY GADGET OF MASS DESTRUCTION
Flashing a zip in cwm will not change your baseband - it's like flashing a custom rom zip - It maybe based on that baseband but your phone's baseband doesnt change
Therefore you can flash any rom via cwm on any baseband & it should work - the only possible issue could be loss of imei but a change of kernel normally solves that
To actually change basebands you need to flash a different stock rom firmware via odin
you can find theses on dokys thread in dev section
You can also find latest firmware on sammobile.com but you will need to use the splitter tool also on dokys thread to split the firmware into its separate parts to be able to flash it with odin
Unable to Download stock indian firmware from hotfile
My phone is bricked, and I need to install urgently a Stock Indian rom for my galaxy y.
All links for the firmwares point to Hotfile, which is not accesable currently.
Could some one please point to a download link other than hotfile, so that I can download the firmwares.
Any of the below roms would be helpful.
S5360_DDLA3_ODDLA2_DDLA2
S5360_DDLC2_ODDLA2_DDLC2
S5360_DDLE1_ODDLD1_DDLE1
S5360_DDLF2_ODDLF1_DDLF1
S5360_DDLK2_ODDLK1_DDLK1
nanoharsha said:
My phone is bricked, and I need to install urgently a Stock Indian rom for my galaxy y.
All links for the firmwares point to Hotfile, which is not accesable currently.
Could some one please point to a download link other than hotfile, so that I can download the firmwares.
Any of the below roms would be helpful.
S5360_DDLA3_ODDLA2_DDLA2
S5360_DDLC2_ODDLA2_DDLC2
S5360_DDLE1_ODDLD1_DDLE1
S5360_DDLF2_ODDLF1_DDLF1
S5360_DDLK2_ODDLK1_DDLK1
Click to expand...
Click to collapse
unfortunalty I havent got any of them but you can try a european firmwire just to get your phone booting - i dont know if you will get network but if you urgently need to try something I uploaded this on dev host
http://d-h.st/FhE
search google it.
NexuS** said:
search google it.
Click to expand...
Click to collapse
please note that all firmwire used to be on hotfile - this host site has been shut down so saying google it is not helpful as all sites would point to hotfile
thats why I uploaded the other firmwire on dev host but i dont have any others
Unable to Download stock indian firmware from hotfile
marcussmith2626 said:
please note that all firmwire used to be on hotfile - this host site has been shut down so saying google it is not helpful as all sites would point to hotfile
thats why I uploaded the other firmwire on dev host but i dont have any others
Click to expand...
Click to collapse
I tried flashing via odin using the file given. It was failing.
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/021> Removed!!
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Set PIT file..
<ID:0/022> DO NOT TURN OFF TARGET!!
<ID:0/022> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
AT one point I was ablee to boot into a custom Hyperion Rom after flashing it.
There were WIFI issues, so I tried reflashing kernel etc, and again, I got the below issues.
-- unable to mount /data, /sdcard, /system /cache.
I read through some posts and found out that flashing stock rom is the only way. But here I am unable to flash stock rom also. Btw I am from India, just in case any one wants to help with firmware.
PLease suggest.
nanoharsha said:
I tried flashing via odin using the file given. It was failing.
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/021> Removed!!
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Set PIT file..
<ID:0/022> DO NOT TURN OFF TARGET!!
<ID:0/022> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
AT one point I was ablee to boot into a custom Hyperion Rom after flashing it.
There were WIFI issues, so I tried reflashing kernel etc, and again, I got the below issues.
-- unable to mount /data, /sdcard, /system /cache.
I read through some posts and found out that flashing stock rom is the only way. But here I am unable to flash stock rom also. Btw I am from India, just in case any one wants to help with firmware.
PLease suggest.
Click to expand...
Click to collapse
are you using a pit file? its not required
did you say that firmware worked before but its not now or didnt work at all?
try using a different version of odin
try odin 1.85
what kernel did you try and flash
did you format system data and cache in cwm and then try to mount?
Dont spam
SENT FROM MY GADGET OF MASS DESTRUCTION
MohitDMO said:
Dont spam
SENT FROM MY GADGET OF MASS DESTRUCTION
Click to expand...
Click to collapse
Why do you consider that we are spamming ? This is a general thread not a development thread first of all..
And here I am unable to boot my device, and peers like marcussmith2626 are trying to help me get to use my device.
So whats spamming here. As I dont see anything irrevelant.
---------- Post added at 06:12 PM ---------- Previous post was at 06:04 PM ----------
marcussmith2626 said:
are you using a pit file? its not required
did you say that firmware worked before but its not now or didnt work at all?
try using a different version of odin
try odin 1.85
what kernel did you try and flash
did you format system data and cache in cwm and then try to mount?
Click to expand...
Click to collapse
I tried once using a pit file, and once without , deosnt change anything.
I tried the version of Odin you ve sent, but its the same result. Doesnt help. The process still fails.
I tried to flash hells fusion, and thats when things went bad. Before I was on PErcy's/WhiteXP's Kernel I suppose.
I am unable to format system data cache, because I am even uanbel to mount them, which seems to be the problem now.
Else I should be able to flash a custom rom easily.
So need to get over the unable to mount issue, rest should fall in place.
nanoharsha said:
Why do you consider that we are spamming ? This is a general thread not a development thread first of all..
And here I am unable to boot my device, and peers like marcussmith2626 are trying to help me get to use my device.
So whats spamming here. As I dont see anything irrevelant.
---------- Post added at 06:12 PM ---------- Previous post was at 06:04 PM ----------
I tried once using a pit file, and once without , deosnt change anything.
I tried the version of Odin you ve sent, but its the same result. Doesnt help. The process still fails.
I tried to flash hells fusion, and thats when things went bad. Before I was on PErcy's/WhiteXP's Kernel I suppose.
I am unable to format system data cache, because I am even uanbel to mount them, which seems to be the problem now.
Else I should be able to flash a custom rom easily.
So need to get over the unable to mount issue, rest should fall in place.
Click to expand...
Click to collapse
have you tried to actually format them? - you dont need to have them mounted to format them
all you need to do really is flash stock rom then in stock recovery not cwm select wipe data/factory reset
then you should be able to flash cwm and format system data cache and then mount them without after they have formatted without error
marcussmith2626 said:
have you tried to actually format them? - you dont need to have them mounted to format them
all you need to do really is flash stock rom then in stock recovery not cwm select wipe data/factory reset
then you should be able to flash cwm and format system data cache and then mount them without after they have formatted without error
Click to expand...
Click to collapse
I have tried both the things.
The stock rom flashing is failing via odin, the error message is as below :
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Set PIT file..
<ID:0/022> DO NOT TURN OFF TARGET!!
<ID:0/022> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/022> Removed!!
And I am also unable to wipe cache/data etc, because of mount issue.
nanoharsha said:
I have tried both the things.
The stock rom flashing is failing via odin, the error message is as below :
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Set PIT file..
<ID:0/022> DO NOT TURN OFF TARGET!!
<ID:0/022> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/022> Removed!!
And I am also unable to wipe cache/data etc, because of mount issue.
Click to expand...
Click to collapse
you didnt answer my previous question of did you manage to flash this firmwire successfully at all in the past as I havent fully tested flashing this firmeware myself - you said you flashed it before then flashed hyperion so did it flash correctly before or have you always had this error with this firmware?
try with this pit file
http://forum.xda-developers.com/attachment.php?attachmentid=1489509
The only solution I found is what iv already said
Recovery
Mounts and storage Format cache data and system (dont worry it says mount errors when you enter cwm just format them)
Download mode flash stock rom
Related
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
**Edit: I don't think I did use repartition...I usually never do....this all started after me trying to clean install via CWM from official rooted LPY it got stuck on formatting then rebooted and was on logo forever so I proceeded to use Odin flashing LPY failed, tried all methods posted here besides flashing kernel Abyuss note 4.2 from in PDA as someone here suggested but since I can't find one that works with Odin I just reflash LC1 rooted stock multiple times but no luck it fails and NAND Write Start which is almost at the end of flashing.
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:13)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Can't open the specified file. (Line: 1876)
All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
jwais said:
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
Click to expand...
Click to collapse
Did you backup your previous from ..if you did just go into recovery and restore it
Sent from my GT-N7000 using xda premium
You are making one huge mistake : you have the box "re-partition" selected. Uncheck that option and you should be good to go.
P_
jwais said:
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
Click to expand...
Click to collapse
Try to flash gingerbread rom from http://forum.xda-developers.com/showthread.php?t=1535025 i would try this one "N7000XXLC1_N7000OXALC1 Open Europe (02/03/2012)" because it a full wipe.
Here is how to solve.
1.flash stck GB rom
2.wipe data/cache from stock recovery.
3.now flash stock ics.
4.then flash another rom/ root kernel
Sent from my GT-N7000 using xda premium
awesome-member said:
Here is how to solve.
1.flash stck GB rom
2.wipe data/cache from stock recovery.
3.now flash stock ics.
4.then flash another rom/ root kernel
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
That' the safest way.
Sent from my Galaxy Note
Thanks guys, I tried reflashing stock GB lc1 and it stoped on odin pc sayig failed and I did not repartition this time. Tried reflashing stock ICS LPY with no luck...it fails.
If anyone has another option please let me know...I cannot access recovery only download mode when I try to access recovery it gives me " firmware upgrade failed encountered an issue. Please select recovery mode in kies & try gain" .....
jwais said:
Thanks guys, I tried reflashing stock GB lc1 and it stoped on odin pc sayig failed and I did not repartition this time. Tried reflashing stock ICS LPY with no luck...it fails.
If anyone has another option please let me know...I cannot access recovery only download mode.....
Click to expand...
Click to collapse
Try to find the pit file and use it with repartition checked.
Sent from my GT-N7000 using XDA
just to be sure,
did u kill all kies processes?
aww
jwais said:
Hi All,
So, I was one of those people who last night decided I needed to have clean install for my newly LPY ICS flashed through odin PC. Obviously, I had not read the warning threads only after my phone got stuck on format and then rebooted and got stuck on logo did I visit XDA and saw the new warning Anyhow, what I had flashed was a rooted version of LPY ICS. Now, I have access to download mode but when I tried to reflash through Odin PC I get a failed attempt with this message !!!
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone please help. I have no idea what I should do I even tried flashing stock ICS LPY but at 3/4 of the way it would also fail!!!
Click to expand...
Click to collapse
idk how to i wish i could man
Kill KiesHelper.exe and KiesPDLR.exe and try to flash again
Yup killed all kies processes. Reflashing stock LC1 one last time with odin pc as suggested....pray for me
I had this similar issue. I had to completely un install Kies and then Odin worked without issue
Sent from my GT-N7000 using xda premium
i slashed my knees open, knelt with salt and lemon on the ground. i can't do this for long.... is your note ok (i hope i do not have to do some other kind of rituals for the flash procedure to work for you).
Ok guys after trying to reflash second time stock GB LC1 with odin pc this is what I get:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLC1.tar.md5 is valid.
<OSM> MODEM_N7000XXLB2_REV_05_CL1106002.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> factoryfs.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
It goes almost all the way but then somehow stops at the nand write part. Anyone has any clue?
Did you completely uninstall kies? It's worth a shot...
Sent from my GT-N7000 using xda premium
Uninstalling Kies right now...will try again flashing. Thanks!
take out your battery, restart the pc... and try another cable if possible.
make sure all firewalls and/or antivirus softwares are disabled. if it helps, run odin as administrator.
while you do that, i shall make a bonfire and prepare to dance around naked around the flame and chant the songs my great ancestors has been singing since time immemorial.
Ok, I think I found a pattern for the failed attempts during flashing...it always stalls and fails during the NAND Write Start.....anyone has any clue as to why?
Maybe it sounds stupid but what version of Odin do yo use?
I come from an Omega ROM v19 (4.3) rooted on a Galaxy S4
I tried to flash back the stock ROM that was a 4.2.2 and ODIN came with that message
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sbl2.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl3.mbn
<ID:0/008> rpm.mbn
<ID:0/008> aboot.mbn
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
In download mode after the flash fails, appears this message
Code:
START [224,1440]
SW REV. CHECK FAIL : fused : 4, Binary : 3
I cant't solve that soft-brick, i tried on different USB ports but seems that is not working, even changing ODIN version
Can you help me?
PS: Sorry for my bad english
C4scade said:
I come from an Omega ROM v19 (4.3) rooted on a Galaxy S4
I tried to flash back the stock ROM that was a 4.2.2 and ODIN came with that message
Code:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:8)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sbl2.mbn
NAND Write Start!!
sbl3.mbn
rpm.mbn
aboot.mbn
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1
In download mode after the flash fails, appears this message
Code:
START [224,1440]
SW REV. CHECK FAIL : fused : 4, Binary : 3
I cant't solve that soft-brick, i tried on different USB ports but seems that is not working, even changing ODIN version
Can you help me?
PS: Sorry for my bad english
Click to expand...
Click to collapse
Did you solved it?
If you have a nandroid backup just restore.
Before you try flash other stock firmware by Odin, perform a full wipe (Data/Cache and Dalvik).
Maybe it can solve your bad flash.
Edit : Did you check MD5 of your firmware?
? from my GT-I9300 NeatROM™ Slim AOSP V.2.8 ?
Ricardo_Is said:
Did you solved it?
If you have a nandroid backup just restore.
Before you try flash other stock firmware by Odin, perform a full wipe (Data/Cache and Dalvik).
Maybe it can solve your bad flash.
Edit : Did you check MD5 of your firmware?
? from my GT-I9300 NeatROM™ Slim AOSP V.2.8 ?
Click to expand...
Click to collapse
Sorry for my bad english but
i also got the same error with odin :
aboot.mbn
FAIL! (Auth)
got no sound and got a black screen when calling mic also not working
flashing custom roms wont fix it any way to install stock i9505 rom without odin or kies ?
's it fixable any ideas ??
Ricardo_Is said:
Did you solved it?
If you have a nandroid backup just restore.
Before you try flash other stock firmware by Odin, perform a full wipe (Data/Cache and Dalvik).
Maybe it can solve your bad flash.
Edit : Did you check MD5 of your firmware?
? from my GT-I9300 NeatROM™ Slim AOSP V.2.8 ?
Click to expand...
Click to collapse
Man, i don't think that a nandroid backup can solve a binary error.. and yes, i checked the firmware md5, it's ok, it is from sammobile.com
I'd say if you've got aboot fail then your trying to flash older rom on a phone that's had newer rom on it aka Knox already.
Sent from my GT-I9505 using xda app-developers app
Flash the ''i9505 pit'' file on odin in pda. That will fix
DONE!!!
mr.biceps said:
Flash the ''i9505 pit'' file on odin in pda. That will fix
Click to expand...
Click to collapse
Hi
I like to share how I fixed my S4 using ODIN 3.09
1. I flash the ''i9505 pit'' file on odin in pda (JUST THIS ONE FILE)
2. I used CF-Auto-Root-jflte-jfltexx-gti9505.tar
3. I tried to use Firmware with 4.3 because the phone had updated android to 4.3 v. but in the ODIN program appeared FAIL!
4. So I decided to install an older Firmware (with 4.2.2 v.) and it helped
Thank you for all the advice and good work XDA TEAM!!!
mgolejnik said:
Hi
I like to share how I fixed my S4 using ODIN 3.09
1. I flash the ''i9505 pit'' file on odin in pda (JUST THIS ONE FILE)
2. I used CF-Auto-Root-jflte-jfltexx-gti9505.tar
3. I tried to use Firmware with 4.3 because the phone had updated android to 4.3 v. but in the ODIN program appeared FAIL!
4. So I decided to install an older Firmware (with 4.2.2 v.) and it helped
Thank you for all the advice and good work XDA TEAM!!!
Click to expand...
Click to collapse
Hi there,
Just out of interest, How did you manage to flash 4.2.2 firmware via Odin to a phone that had had the 4.3 firmware installed via an update??
I (and many others) are aware that 4.3/4 firmware has the KNOX enabled boot-loaders making it impossible to downgrade stock firmware
Or have I completely misunderstood your resolution/fix?
CarlM34 said:
Hi there,
Just out of interest, How did you manage to flash 4.2.2 firmware via Odin to a phone that had had the 4.3 firmware installed via an update??
I (and many others) are aware that 4.3/4 firmware has the KNOX enabled boot-loaders making it impossible to downgrade stock firmware
Or have I completely misunderstood your resolution/fix?
Click to expand...
Click to collapse
But I never wrote that I had installed version 4.3 / 4. This is the version which is installed this time: I9505XXUFNB9_I9505O2UFNA2_I9505XXUFNB9_HOME.tar after this I flash CF-Auto-Root-jflte-jfltexx-gti9505.tar and now it is rooted and it is KNOX (but not for long)
Maybe I made a mistake. If so, sorry
...
I MADE MISTAKE!!! I am so sorry for that!!!
I9505XXUFNB9_I9505O2UFNA2_I9505XXUFNB9_HOME.tar it is newest version it's 4.4.2!!! I am sorry again.
I'm Also Having a problem with my samsung s4 gt-i9505 (INS)
i was trying to flash my phone with 4 files of firmware with Odin3 v3.10.6
and while flashing i got this problem
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9500XXUHPI1_CL9155695_QB10809785_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9500XXUHPI1_CL9155695_QB10809785_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9500DDUHPE1_REV01_CL1856465_SIGNED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ODD_I9500ODDHOJ1_CL5979820_QB6580299_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if you have any solution please reply
my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Try Adding the pit file+the stock rom in odin and flash them together, and see if that works
did you do the download mode
Power off phone
Press and hold Home + Volume down + Power on button
Press volume up to confirm and enter download mode
i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...
Kobro said:
i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...
Click to expand...
Click to collapse
Try to connect mobile using SS port. i.e. the USB port with different colour in a laptop. It is also known as US 3.0 port!
Kobro said:
my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It failed because you have not split the firmware first - Galaxy y does not support single file flashing
You need to split the firmware into pda modem and csc - You can do this by using splitfus2 link in my signature
However I have already split pretty much all available firmware which you can find on my firmware thread - http://forum.xda-developers.com/showthread.php?t=2568853
The one that you want based on what your odin log says will be
http://d-h.st/hOn
I was updating my samsung galaxy grand prime duos (SM-G531H) with kies, not knowing my cable was broken while the updating the phone disconnected and i ended up with a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again" i changed the cable and decided to flash the update with odin... process went through and the phone booted up normal with the new update installed... now i decided to factory reset so i went into the stock recovery and did but it came up with a bunch of errors which i didn't take note of... i flashed twrp and repaired the file system, wiped system and then i flashed the the firmware together with the pit file on odin once more... the phone booted up normal and i was using it and eveything when i put it to charge and came back 10 mins later the phone was off.... when i powered it on it just stays on the "samsung galaxy grand prime" screen and doesn't boot... it doesn't go into recovery anymore it just hangs whe're it says "recovery is not seandroid enforcing" i tried flashing the firmware with odin again but every single time i tried it keeps failing at...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried the repair firmware together with the pit file and it gets stuck at
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
it's been like that for over an hour now... any help would be much appreciated guys.
No
Try with orignal firmware
nihu.46 said:
Try with orignal firmware
Click to expand...
Click to collapse
I tried everything and nothing seems to work
I also get this problem. Does anyone know how to fix it?
Ghettovybz said:
I tried everything and nothing seems to work
Click to expand...
Click to collapse
Remove kies. Reinstall samsung drivers.
Find and flash TWRP 3.0.0 with odin ( on recovery is not SEAndroid enforcing hold volume up and home for 5-10 seconds. Also flash the Custom Kernel by eyeless95 on the forum, its sepermissive.
u0aol said:
Remove kies. Reinstall samsung drivers.
Find and flash TWRP 3.0.0 with odin ( on recovery is not SEAndroid enforcing hold volume up and home for 5-10 seconds. Also flash the Custom Kernel by eyeless95 on the forum, its sepermissive.
Click to expand...
Click to collapse
What about for SM-G530H?
Do u have the link for the kernel?
After installing kernel what should I do then?
Two ways. Find stock rom in Sammobile and install via Odin (newest). Or try once again install it via Kies. You sould can restore it with Kies, but dont plug phone to computer. Write down S/N or something like that (it's under battery) and model, and Kies will download system
argounaut said:
What about for SM-G530H?
Do u have the link for the kernel?
After installing kernel what should I do then?
Click to expand...
Click to collapse
I have a g531h so I'm not sure. I'm below ten posts so i cant post links.
There are kernels and recoverys in the development section that work fine for your phone .
Hi all,
I just recently rooted my s7 edge, T-mobile SM-G935T. So I noticed a lot of lag as well as some other problems. So I installed the apps BusyBox, Trickster Mod Kernel Settings, build.prop Editor and Titanium Backup. In BusyBox I installed /system/xbin, in Trickster I went to general and changed the governor to interactive and checked the box “Kernel Settings” in the SET ON BOOT window, in build.prop Editor I searched for ro.securestorage.support and changed the property key to ‘false”, in titanium backup I searched for securityLogAgent and froze it. Then I restarted my phone and it was working flawlessly.
I basically followed the tutorial in this video "youtube.com/watch?v=GNInTlCpv8E"
Finally I installed the app FolderMount [root] (because I wanted to move apps to my sd card )and when I opened it gave me a message. I don’t remember what the message, but it asked me for permission to to make some changes in order to work correctly. So I accepted, then it told me that I should reboot my device so that the changes could take effect. When I restarted my phone I got a message saying “device memory error: the data partition has been corrupted. You need to reset your device to factory defaults. This will erase all your data” so I reset. However, when by phone booted, I got stuck on the “Samsung Galaxy s7 edge” screen, it was basically a loop.
I tried to wipe all the data and factory reset but that did not work.
This was what I got trying to factory reset:
supported API: 3
dm-verity verificatin failed...
--wiping data...
Formating /data...
Formating /cache...
-- set factory reset done...
-- copying media files...
-- preload checkin...
E:failed to mount /preload (no such file or directory)
data wipe complete
Finally I tried to install the stock rom and this is what I got from Odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G935TUVU2APC8_CL7620454_QB9055153_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G935TUVU2APC8_CL7620454_QB9055153_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_G935TTMB2APC8_CL7620454_QB9055153_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G935TUVU2APC8_CL7620454_QB9055153_REV02_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, I do not know what to do to get my phone working again. :crying:
maybe you need to use a pit file and totaly erase your nand+partition. that is what i always do.
adoe said:
maybe you need to use a pit file and totaly erase your nand+partition. that is what i always do.
Click to expand...
Click to collapse
What exactly is a pit file. Could you provide some links where I could learn about it?
http://forum.xda-developers.com/s7-edge/how-to/collection-firmware-rom-pit-files-t3326706
adoe said:
http://forum.xda-developers.com/s7-edge/how-to/collection-firmware-rom-pit-files-t3326706
Click to expand...
Click to collapse
OMG I love you so much, thank you
:laugh:
adoe said:
http://forum.xda-developers.com/s7-edge/how-to/collection-firmware-rom-pit-files-t3326706
Click to expand...
Click to collapse
Sparticle4 said:
OMG I love you so much, thank you
:laugh:
Click to expand...
Click to collapse
Any idea how to use a PIT file please?
first of all try using odin 3.12.3 as you are using an older version of odin which may not work with s7.
if that does not work, download the correct PIT file and then use the PIT tab in odin to flash.