Sorry for possible misinformation... my new phone does not use the same codes as the other F3...
After hours of waiting in hold with Virgin mobile I was able to finally get the codes that manually allow you to program your phone to virgin mobile. The code you need is ##031373# it allows you to enter your Mdn and msid. This way if their stupid auto progrm does not work you can still get it to work. you type it in the dialer window for those of you unfamiliar with VM programing.
Is there is a different code for each phone???... bought a new optimus F3 and found out that the code did not work but the code for my new phone is ##962544#
This is for the Virgin Mobile Models. if you want to factory reset you can use the code ##786#
And if for some reason you need to reset the auto program feture so that the next time you boot up it will try to program the phone you can use code ##72786##
Related
Hi,
as far as I know, Windows Mobile for Smartphone supports the "Alternate Line Service", a feature allowing one to have two phone numbers on one contract and switch between these numbers. The necessary menus for this service are only visible if the service has been activated in the CSP of the simcard.
However, eplus (Germany) offers this service, but does not activate the simcard. Therefore it is necessary to activate the menus manually, which could be done on e.g. Nokia phones by so called CSP-override.
I wonder if it is possible to activate these menus in windows smartphone as well, e.g. by a registry hack?
Thanks,
Chris
Does anyone know how to unlock and change the carrier provisioning for the HTC Shift? I have a Shift without Sprint service and would like to use it on another carrier. Is there a PST for the Shift?
I have just noticed that there is an EPST under Settings/Activate. Does anyone know the Sprint Unlock code?
shaunks said:
I have just noticed that there is an EPST under Settings/Activate. Does anyone know the Sprint Unlock code?
Click to expand...
Click to collapse
You can use this program, but runs in Windows Mobile, I ran it on my HTC Mogul, you have to put the ESN (hex) of your shift and press the button, then you get the SPC Code.
http://www.rafaelc.net/files/GetSPC.zip
But the EPST of the Shift only enables you to change the MDN and MSIL, not the PRL or another data
Here is all the info I have on sprint:
554181 activation password(this worked for getting into Activation and EPST)
909387 one time password(didnt work for me)
enter programming mode ##3282#(EPST Advanced)
Hard Reset for Radio
##786#
Hopefully this will help you get somewhere with verizon or whoever.
G
Thanks, the advanced EPST works (I have anoter SPC Code but I used the GetSPC program), I changed all the configuration that I need (as I did with my Mogul)
Now I'm connected with Iusacell, my carrier in Mexico
Regards
excellent, curious how you were able to change the roaming list to go to your towers instead of looking for the sprint towers?
G
GuardianZX9 said:
excellent, curious how you were able to change the roaming list to go to your towers instead of looking for the sprint towers?
G
Click to expand...
Click to collapse
My local carrier gave me a PRL file for my location
Ok, so i need to change some of the settings in EPST. Cant change a good portion of what i can see/view, yet on the Eris, there's a full working EPST and you can basicly edit anything you can see. Is there something im missing or need to do to make the values editable and or has anyone tried to use the Eris EPST on the Hero?
Thanks, in advance..
need password to edit EPST on Hero
When accessing the EPST on the Hero, I get:
1. View Mode
and
2. Edit Mode
View mode has two options:
1. User Name (Active Profile, user Name, SPI MN-HA, SPI MN-AAA, Reverse Tunnel Preferred, Home IP, Primare Home Agent, Second Hoome Agent, DSA Server URL)
and
2. Advanced [ESN(dec), MEID(hex), P_REV, SCM, Slot Mode, Slot Cycle Index, MCC, MNC, MSID, ACCOL, Vocoder, Home Orig, Roam Orig, Home Sys Reg, Foreign SID Reg, Foreign NID Reg, MN HA SPI Set, MN AAA SPI Set, Home SID/NID #1]
Edit Mode has:
A Password Protect!!! Hence the post
Anyone know the password, or how to obtain it?
That's your MSL number. There is a thread that has a step by step on how to get it. I got mine that way but don't remember at all which one is it. Search MSL number and stuff like that and you should find it.
Sprint will give u the msl number. It may be tricky. Like call up and say data isn't working and say u can't make it to a store. Something like that or just try asking for it. They may give u some kinda run around. But they can and will give it to u. I had issues with my diamond and data not working. I called up and they actually had me go into epst and gave me the password and all. I think though they had me look at it first and see if a setting had a 1 or a 0 by it and it had a 0. So then they asked me to go in and edit it and put a 1 on instead. Anyhow it went something like that. Is say to call up and ask or give them a line of **** and ill most likely get it. Good luck
I am looking for the ## codes for the fascinate. I am sure that someone is able to find them. I have searched the web for hours and not found any that will work with the fascinate. I am only looking, because I am sure that just like my incredible I can change the IP settings and use the wifi tethering for free on the fascinate too.
I appreciate any and all help to get these codes.
Have you tried the codes that work on the international I9000, Samsung's first Galaxy S model?
Thanks for the link. I tried about half of those and none of them work. I think their must be a set of codes specific to the CDMA version.
I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.
candrist said:
I was able to get a few codes out of a verizon represenative, but not everything.
This code enables the ability to use the second code I got.
*#22745927
you then enter 000000 for the spc
and change to Hiddenmenu Enable and press ok.
the type **772
you then enter 000000 for the spc
This will enable you to manually program the NAM.
Now I just need the code to modify the network settings for the data portion of the phone.
Click to expand...
Click to collapse
Verizon told me to do *228 option 2 to re-sync roaming towers to get a better signal.
Hello,
I'm programming something and I have to access some ciphering related values stored in the NV items. I think I already came across a lot of threads talking about MSL/SPC "magic" methods but I believe this is not working anymore. Is there a an actual way to retrieve this code or the only one would be to call my service provider ?
Thanks.