Related
I've been searching for the stock kernal for at&t users for s bit now, can't find it I'm trying to fix the annoying "updating camera firmware,please wait..." message. Unless there's a better way, I'll just assume you have to flash the sock kernal to update it. But if you flash the sock Kernal, wouldn't the phone fail on boot?
Sent from my GT-I9505 using xda app-developers app
bubblebuddyi said:
I've been searching for the stock kernal for at&t users for s bit now, can't find it I'm trying to fix the annoying "updating camera firmware,please wait..." message. Unless there's a better way, I'll just assume you have to flash the sock kernal to update it. But if you flash the sock Kernal, wouldn't the phone fail on boot?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
What ROM are you running? Omega?
Sent from my GT-I9505 using xda app-developers app
rcklss1 said:
What ROM are you running? Omega?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
No, I'm running Wanamlite v1.0.
I just reinstalled the stock AT&T rom to allow the camera to update, but when I ran the camera, no update appeared. So I figured it was all set. After re-rooting, I re-installed Wanamlite and KT kernal, open up the camera, and sure enough the message re-appears. I didn't perform any wipes. But it looks like I'll have to because all the AT&T bloatware was re-installed again.
bubblebuddyi said:
No, I'm running Wanamlite v1.0.
I just reinstalled the stock AT&T rom to allow the camera to update, but when I ran the camera, no update appeared. So I figured it was all set. After re-rooting, I re-installed Wanamlite and KT kernal, open up the camera, and sure enough the message re-appears. I didn't perform any wipes. But it looks like I'll have to because all the AT&T bloatware was re-installed again.
Click to expand...
Click to collapse
Your mistake was reinstalling Wanamlite again. Here's how you install non AT&T ROMs
1. Root your phone. I used the one click TWRP and Loki method.
2. Factory Reset and install custom ROM.
3. Install AT&T kernel. Let it boot up. Open Camera.
4. Reboot to recovery. Install custom kernel. Wipe cache and Dalvik. Fix Permissions.
5. Reboot. All done.
Sent from my Galaxy S4
Baldilocks said:
Your mistake was reinstalling Wanamlite again. Here's how you install non AT&T ROMs
1. Root your phone. I used the one click TWRP and Loki method.
2. Factory Reset and install custom ROM.
3. Install AT&T kernel. Let it boot up. Open Camera.
4. Reboot to recovery. Install custom kernel. Wipe cache and Dalvik. Fix Permissions.
5. Reboot. All done.
Sent from my Galaxy S4
Click to expand...
Click to collapse
Thanks, you're right about my mistake lol I ended up just installing someone else's ROM and it works perfectly. I'm a bit lost reading your instructions, It was my understanding that custom ROM's would not load with stock kernel?
bubblebuddyi said:
Thanks, you're right about my mistake lol I ended up just installing someone else's ROM and it works perfectly. I'm a bit lost reading your instructions, It was my understanding that custom ROM's would not load with stock kernel?
Click to expand...
Click to collapse
You need a carrier kernel for your custom ROM.
Sent from my Galaxy S4
Baldilocks said:
You need a carrier kernel for your custom ROM.
Sent from my Galaxy S4
Click to expand...
Click to collapse
can you link to a stock kernel for the AT&T i337?
xxhorseriderxxx said:
can you link to a stock kernel for the AT&T i337?
Click to expand...
Click to collapse
Exactly, its nice he can recommend installing a stock kernel, but they are not to be found. I asked in another thread and didn't get an answer. I somehow got it to work just wiping and installing Omega 5.0 Then to get wifi to work I installed ktoonez kernel.
Sent from my GT-I9505 converted SGH-I337
highaltitude said:
Exactly, its nice he can recommend installing a stock kernel, but they are not to be found. I asked in another thread and didn't get an answer. I somehow got it to work just wiping and installing Omega 5.0 Then to get wifi to work I installed ktoonez kernel.
Sent from my GT-I9505 converted SGH-I337
Click to expand...
Click to collapse
okay, assuming you're using the AT&T variant, I did this:
I got the looping "installing camera firmware" and tried faux an ktoonsez with no luck
I flashed this tmobile stock kernel and the camera firmware updated successfully by going into the camera app.
I then just flashed faux kernel back and everything worked great.
http://forum.xda-developers.com/showthread.php?t=2271976
I use shabbypenguin's auto loki CWM recovery, but you'll have to definitely flash the loki patch after the tmo kernel to make this work.
http://forum.xda-developers.com/showthread.php?t=2291956
So, I'm new to the locked bootloader scene. The root & ROM threads, tutorials, and videos seem to root via a Terminal Emulator process, then install Safestrap. Those same sites and videos say that when you're flashing a ROM after selecting a new ROM Slot, you have to flash "whatever modules and packages are for your device", whatever that means. Since I can't find these packages anywhere, is it safe to assume that I can just root, install Safestrap, create a ROM Slot, and start flashing away as if nothing's up? Or do I need to worry about this boot patch and some "Loki Doki" thing I heard about. I'm sure these answers exist, and I've done my due diligence, but these threads have either been buried for good, or are such a common a knowledge subset that I can't find anything concrete. Even the videos I've seen talk about the "modules" you have to flash. I'm an experienced Androidist, tinkerer, and tweaker. The information I'm finding doesn't provide you with the big picture. It's all, "MJ2 read this, and follow these 9 steps", and "mk2 follow these 10 steps". But none of them tell you what to do in Safe strap recovery, and if you needs some Loki/module magic.
Help a brotha out? I'll return the favor 10-fold, I can promise you that much. I'll be quite active around here.
Thanks!
Sent from my Nexus 7 using XDA Premium HD app
First off you never said what baseband you were on but assuming that your on MK2 android 4.3 then let's start.
Use this method to root your device
http://forum.xda-developers.com/showthread.php?t=2569827
Since your on mk2 you can ONLY use safe strap 3.71 do not attempt to install safe strap 3.65 AND SAFE STRAP WILL BE THE ONLY RECOVERY YOU CAN INSTALL!
http://forum.xda-developers.com/showthread.php?t=2448925
And note that 3.71 is still in beta as of right now there are still bugs and YOU CAN ONLY FLASH A COUPLE OF ROMS.
From the same thread cause I know your not going to go through the forums and read, download the attmk2module.zip that ted77usa posted
http://forum.xda-developers.com/showthread.php?t=2448925
Root your device
Install safestrap after install, install recovery in safestrap apk.
There's only a few Roms you can flash
Darthstalker x in the att android development forum
Hyperdrive 12 in the Verizon android development forum download the one that says safestrap
A few have noted that some other Roms work but I haven't tested it out do some more reading.
After you download a rom
Reboot your device and go into safestrap recovery
Create a ROM slot ON ROM SLOT 1
DO NOT MESS WITH YOUR STOCK SLOT!
After creating a ROM slot go to install and install your rom.
After successfully installing a ROM reboot then go back into recovery and install the attmk2module.zip
Reboot and instead of going into recovery this time continue
It will take awhile to load its normal.
Now you should have a ROM.
Now go tinker with that.
AT&T SGH-I337 RUNNING HYPERDRIVE 12
ATTMK2kernelmodules Original Post i don't think u would like to go over 1000 post on that thread..... and at the bottom there is SHOstock_v3.0_Safestrap_Ready link that also confirmed work by several people.......hope this help u to get start it..... .
Bootloader:................Use:...................Custom Rom:
MDL/MDB.......................LOKI.....................4.2.2......4.3.....4.4 ALL WORK (....LUCKY U....)
MF3................................SS-v3.65................ONLY FLASH 4.2.2 ROM (Slot1,Slot2 and Stock ALL WORK)
MK2................................SS-v3.71................SOME 4.3 ROM WORK (Slot1,Slot2 and Stock ALL WORK (confirmed))
[email protected] said:
First off you never said what baseband you were on but assuming that your on MK2 android 4.3 then let's start.
Use this method to root your device
http://forum.xda-developers.com/showthread.php?t=2569827
Since your on mk2 you can ONLY use safe strap 3.71 do not attempt to install safe strap 3.65 AND SAFE STRAP WILL BE THE ONLY RECOVERY YOU CAN INSTALL!
http://forum.xda-developers.com/showthread.php?t=2448925
And note that 3.71 is still in beta as of right now there are still bugs and YOU CAN ONLY FLASH A COUPLE OF ROMS.
From the same thread cause I know your not going to go through the forums and read, download the attmk2module.zip that ted77usa posted
http://forum.xda-developers.com/showthread.php?t=2448925
Root your device
Install safestrap after install, install recovery in safestrap apk.
There's only a few Roms you can flash
Darthstalker x in the att android development forum
Hyperdrive 12 in the Verizon android development forum download the one that says safestrap
A few have noted that some other Roms work but I haven't tested it out do some more reading.
After you download a rom
Reboot your device and go into safestrap recovery
Create a ROM slot ON ROM SLOT 1
DO NOT MESS WITH YOUR STOCK SLOT!
After creating a ROM slot go to install and install your rom.
After successfully installing a ROM reboot then go back into recovery and install the attmk2module.zip
Reboot and instead of going into recovery this time continue
It will take awhile to load its normal.
Now you should have a ROM.
Now go tinker with that.
AT&T SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
You're perfect in every way. ? Bromance FTW
You even answer threads like me. This helped a TON! I owe ya one.
Edit: last question. The instructions say to install the ROM, reboot, then install the modules. I assume that the reboot instruction means that we should reboot, boot into the ROM for the first time, then boot back into recovery and install the modules?
Or should I flash the ROM, power down, then boot into recovery (ensuring that the ROM is never booted before the modules are installed)-- I suppose I could just use the reboot recovery option in the Safestrap TWRP.
Sent from my Nexus 7 using XDA Premium HD app
ted77usa said:
ATTMK2kernelmodules Original Post i don't think u would like to go over 1000 post on that thread..... and the on the bottom is SHOstock_v3.0_Safestrap_Ready link that also confirmed work by several people.......hope this help u to get start it..... .
Bootloader:................Use:...................Custom Rom:
MDL/MDB.......................LOKI.....................4.2.2......4.3.....4.4 ALL WORK (....LUCKY U....)
MF3................................SS-v3.65................ONLY FLASH 4.2.2 ROM (Slot1,Slot2 and Stock ALL WORK)
MK2................................SS-v3.71................SOME 4.3 ROM WORK (Slot1,Slot2 and Stock ALL WORK (confirmed))
Click to expand...
Click to collapse
What's SHOStock? An alternative to the ATTMK2Module?
<3 I can see that this is a bangin' start to an awesome and new relationship, between me, my S4, and my new home...the S4 community.
Sent from my Nexus 7 using XDA Premium HD app
By the way...since the ROM selection is limited, I assume heavy XPosed use is okay, and quite common?
Which ROM do you guys prefer?
I assume that sites and articles like this one: http://www.droidviews.com/best-custom-roms-for-att-samsung-galaxy-s4-sgh-i337/
aren't reliable sources--they probably don't take into account the the ATT S4 compatibility issues. This is showing CM11, Carbon, KangaBean, Infamous...am I correct in my assumption that those are for the lucky birdies that had MDL/MDB, and didn't need Safestrap?
Has someone put together a compatibility/guide megathread? I think I will if it hasn't been done.
Sent from my Nexus 7 using XDA Premium HD app
Jamesyboy said:
What's SHOStock? An alternative to the ATTMK2Module?
<3 I can see that this is a bangin' start to an awesome and new relationship, between me, my S4, and my new home...the S4 community.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Welcome aboard!!!! Firstable are u on MF3 firmware or MK2 frimware......? both are using SafeStrap (SS) as custom recovery as of right now. Like i said on previous post MF3 use SS-v3.65 so that u able to install only 4.2.2 TW custom rom or 4.2.2 Google Play Edition (GPE) rom. If u are on MK2 firmware u can only use SS-v3.71 and able to install some of 4.3 custom rom (SHOstock-v3.0-Safestrap-Ready) is one of them that worked......Hyperdrive-RL12 from verizon thread also seem pretty good but u need to add your APN manually if u are on ATT network. Both firmware MF3 and MK2 are use different kernel modules, so after flashing custom Rom you NEED to flash your current firmware kernel modules also, otherwise u won't be able to connect to WiFi,bluetooth,gps etc..... hope this make sense to you......i know is kinda confusing ......but the more u read is the more it would make sense.... Check this thread for list of compatible rom Official AT&T S4 Safestrap Discussion Q/A
One more thing. My S4 will be here tomorrow. Let's say I get lucky and find MDL/MDB on my device. Do I need to hurry and avoid a software update, or avoid a data connection? Or do the updates proceed only with user interaction? The rooting is the same for all 3 devices, but if I do get MDL/MDB or the next one, I'll have to update the baseband before flashing newer ROMs, right?
Sent from my Nexus 7 using XDA Premium HD app
ted77usa said:
Welcome aboard!!!! Firstable are u on MF3 firmware or MK2 frimware......? both are using SafeStrap (SS) as custom recovery as of right now. Like i said on previous post MF3 use SS-v3.65 so that u able to install only 4.2.2 TW custom rom or 4.2.2 Google Play Edition (GPE) rom. If u are on MK2 firmware u can only use SS-v3.71 and able to install some of 4.3 custom rom (SHOstock-v3.0-Safestrap-Ready) is one of them......Hyperdrive-RL12 from verizon thread also seem pretty good but u need to add your APN manually if u are on ATT network. Both firmware MF3 and MK2 are use different kernel modules, so after flashing custom Rom you NEED to flash your cureent firmware kernel modules also otherwise u won't be able to connect to WiFi,bluetooth,gps etc..... hope this make sense to you......i know is kinda confusing ......but the more u read is the more it would make sense....
Click to expand...
Click to collapse
It makes sense, I'm mostly just unfamiliar, as opposed to being completely useless, but you guys have been amazing...you've already shot me up to about 80% on a distribution curve.
Why would anyone stick with MF3? MK2 is an update for MF3, right? Why don't those users update, then safestrap 3.71 it, so they can use 4.3 roms? It'd seem kinda funky to me to be stuck with a 4-2 ROM by choice, unless they're doing it solely for the GPE ROM.
These firmware kernel modules...I'll have the same modules for each ROM I flash right? Or are these modules a .zip that I'll find in each ROM thread, for each carrier.
By the way, APN settings don't scare me. Here, you might actually appreciate this work--done right after ATT's LTE network came online (I believe the Note was the first device that utilized it?...If it wasn't, it was definitely the first to tax the network.)::
http://forum.xda-developers.com/showthread.php?p=26877683
Edit: the Q&A thread for Safe strap was reasonable...but it still talks about kernel flashes, and blown QFusee (har?)
I guess I mainly need to come to grips with the kernel situation. The Q&A says that you can't use custom kernels if you've updated to OTA, but doesn't mention factory MF3 builds, and it isn't really very clear about the module/kernel module situation.
You said I need to flags my **current** firmware kernel modules: are those different if I get a device with MF3 than those for MK2? Or are these just modules that I create myself (based upon whatever's in my stock ROM slot maybe?) in recovery?
Sent from my Nexus 7 using XDA Premium HD app
Jamesyboy said:
One more thing. My S4 will be here tomorrow. Let's say I get lucky and find MDL/MDB on my device. Do I need to hurry and avoid a software update, or avoid a data connection? Or do the updates proceed only with user interaction? The rooting is the same for all 3 devices, but if I do get MDL/MDB or the next one, I'll have to update the baseband before flashing newer ROMs, right?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I dont think u can get MDB/MDL firmware again these days.....but if u do....damn u are pretty lucky....my suggestion is Do Not insert your ATT sim card yet ....since they can do OTA update ( On The Air ).....and check your baseband....IF u do ....root it right away....install titanium back up and freeze/uninstall ATT software update.apk......install custom recovery CWM or TWRP ..... and make sure u have auto loki recovery....if not save loki.doki patch on your Sd Card....PM me for the link and all the files .....i still have the files since i used to have MDB firmware and got replacement phone from ATT when my son broke the screen....:crying:
Jamesyboy said:
It makes sense, I'm mostly just unfamiliar, as opposed to being completely useless, but you guys have been amazing...you've already shot me up to about 80% on a distribution curve.
Why would anyone stick with MF3? MK2 is an update for MF3, right? Why don't those users update, then safestrap 3.71 it, so they can use 4.3 roms? It'd seem kinda funky to me to be stuck with a 4-2 ROM by choice, unless they're doing it solely for the GPE ROM.
These firmware kernel modules...I'll have the same modules for each ROM I flash right? Or are these modules a .zip that I'll find in each ROM thread, for each carrier.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
MDB>MDL>MF3>MJ6>Mj9>MK2.......the reason of the update is ATT trying to lock bootloader so we won't be able to install custom rom or do what ever we want to the phone.......but either way.....XDA member always found away to cracked it....so some people have to upgrade not by choice.....most of them by accident....like me ( cracked my screen ) or they install wrong recovery.....(bricked) so be careful when installing custom recovery.....like i said....we need to know what kinda firmware that u have so we can help u.....LOL now i got it why u dont know yet....since u dont have the phone yet.......... but is ok.....that's the right thing to do.....get to know your stuff first before u brick your phone.....:good: so basically u need to match your kernel modules with your firmware otherwise it won't be able to connect to Wifi,bluetooth,gps,etc it doesn't matter if u OTA to MF3 or MK2.....or it come with MF3 or MK2....
ted77usa said:
I dont think u can get MDB/MDL firmware again these days.....but if u do....damn u are pretty lucky....my suggestion is Do Not insert your ATT sim card yet ....since they can do OTA update ( On The Air ).....and check your baseband....IF u do ....root it right away....install titanium back up and freeze/uninstall ATT software update.apk......install custom recovery CWM or TWRP ..... and make sure u have auto loki recovery....if not save loki.doki patch on your Sd Card....PM me for the link and all the files .....i still have the files since i used to have MDB firmware and got replacement phone from ATT when my son broke the screen....:crying:
MDB>MDL>MF3>MJ6>Mj9>MK2.......the reason of the update is ATT trying to lock bootloader so we won't be able to install custom rom or do what ever we want to the phone.......but either way.....XDA member always found away to cracked it....so some people have to upgrade not by choice.....most of them by accident....like me ( cracked my screen ) or they install wrong recovery.....(bricked) so be careful when installing custom recovery.....like i said....we need to know what kinda firmware that u have so we can help u.....LOL now i got it why u dont know yet....since u dont have the phone yet.......... but is ok.....that's the right thing to do.....get to know your stuff first before u brick your phone.....:good:
Click to expand...
Click to collapse
Groovy! I'll check back in tomorrow! Happy New Years!
(Sent you a PM, as well.)
Sent from my Nexus 7 using XDA Premium HD app
Hello..im pretty new to this as only have rooted a couple other droids in my day..im currently having trouble with my At&t i337 on android 4.3 mk2..im running safe strap & was using a hyperdrive rom today but had no ota data working..so I wiped all the hyperdrive stuff from the phone & downloaded the latest Deadly Venom rom for my device...it installed fine & is working & so far i love it..but when i try to open supersu it says no binaries. .I tried my root checker & its telling me im not rooted..I tried every method i could find to root the phone yesterday & was only successful with using "kingo root" I belive it was called..I dont know what's going on with this thing but i would like to get the problem solved so i can install beats audio or viper4android audio mods ive downloaded among do other things..what do you reckon my problem is & how should i go about fixing it? Thanks ahead of time. .joe
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Mk2 useful link!!!!
Hodgesdroid said:
Hello..im pretty new to this as only have rooted a couple other droids in my day..im currently having trouble with my At&t i337 on android 4.3 mk2..im running safe strap & was using a hyperdrive rom today but had no ota data working..so I wiped all the hyperdrive stuff from the phone & downloaded the latest Deadly Venom rom for my device...it installed fine & is working & so far i love it..but when i try to open supersu it says no binaries. .I tried my root checker & its telling me im not rooted..I tried every method i could find to root the phone yesterday & was only successful with using "kingo root" I belive it was called..I dont know what's going on with this thing but i would like to get the problem solved so i can install beats audio or viper4android audio mods ive downloaded among do other things..what do you reckon my problem is & how should i go about fixing it? Thanks ahead of time. .joe
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Download this latest SuperSu.apk v1.91 and always place it on your SD Card....just incase u losing root.....FOLLOW THESE STEP....HOPE THAT WOULD GET U BACK ON DEADLY VENOM:
1. U NEED TO FLASH TO STOCK FIRST VIA ODIN ....FOLLOW MY THREAD | ★ MK2 ★ FULL ODIN TAR FILES ★ MK2 ★ | ★ UNBRICKED ★ Jan.31.2014 ★ | GUIDE ON POST#2
2. USE SAFEROOT METHOD FROM VERIZON FORUM.....
3. INSTALL SAFESTRAP V3.71
4. DOWNLOAD LATEST DEADLY VENOM v1.3.9-NA4-STOCK-SLOT
5. DO NOT REBOOT TO SYSTEM YET JUST INCASE U MIGHT LOOSE ROOT AGAIN FROM WHATEVER U DID PREVIOUSLY.....FROM SAFESTRAP MENU HIT HOME>INSTALL>FLASH THAT SUPERSU.APK TO EITHER STOCK-SLOT OR ROM SLOT THAT U PLANNING TO USE.....
6 REBOOT TO SYSTEM.....AND ENJOY.....AND CHECK THIS MK2 INDEX & ROM LIST THAT U CAN INSTALL FOR MK2+SSv3.71 USERS
GOODLUCK.....LET ME KNOW HOW IT GO.....:good::good:
That did it!! Just had to boot into SS & flash my SuperSu zip then reboot..working flawlessly! You da man Ted..thanks a ton..mad props..now im off to fiddle with my Wanam & sound mods..do a little more tweaking.. I thought it may be a Supersu issue, I just couldn't figure out how to fix it...now I do..
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
RockRatt said:
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Click to expand...
Click to collapse
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
patstar5 said:
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
Click to expand...
Click to collapse
There's one partially working Google Play edition rom, but otherwise, no.
This makes me truly sad. I was so looking forward to possibly flashing these ROMS and now...I have to get it my time machine and go backwards lol whenever I find the time to figure the downgrading thing out. Sounds to me like I'll be happier when I do find the time.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
There is no way going back to the older bootloader. The only way to go back would be to find an older S4 on eBay etc. with the old BL
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
All the post below are correct except being able to go back to firmware with an unlocked boot loader.. Install safestrap 3.72 and install recovery. You will get a Twrp recovery .. dont try flashing custom kernels ..It might flash but none of the setting such as overclock etc. will work .nor will you be on that kernel version afterwrds .. I guess the simple answer is no for cwm and aosp roms .. You will be only able too flash custom stock roms
Wifi issues with towelrooted gs4
First off this may not be the right place for this (first time poster), and if so, either please help me in finding the right forum or forgive my ignorance.
I rooted my galaxy s4 today, and I have found that when I am trying to use wifi I am unable to connect to some pages. Using chrome I am unable to load google.com, or google anything directly from the search bar. And the app imgur also doesn't load whilst on wifi, but if I switch to my cell network they load just fine. If I had unlimited data of course this would not be an issue, but that is not the case and therefore I come to this forum and hope that someone can help me out!
My s4 is an at&t i337. I would amazingly, greatly appreciate any help!
Much thanks in advance!
lost recovery with unlocked bootloader
Hello,
longtime flasher here, not as familiar with gs4.
My girl has a sgh-i337 that has been bootloader unlocked since day one. Been on TWRP and slim rom the whole time too.
I was wiping Cache, Dalvik Cache, and System prior to doing a rom update and TWRP glitched out while updating partition after the final wipe operation. Screen went black. Boots to download mode only.Will not boot rom (as system was wiped) but shows the samsung custom unlocked logo. When in download (odin) mode, I see product name: sgh-1337, Current Binary: Samsung Official, System Status: Custom CSB_OEM_LSB: 0x30 Write Protection: enable
universal android toolkit will not show device connected so Installation of custom recovery through toolkit fails. ADB will not show device connected. ODIN will show device connected, though.
To recover with odin, can I flash the I337UCUAMDL from sammobile and retain unlocked bootloader?
Thanks for any and all help.
What is the bootloader version you need to unlock? I have 4.2.2 Red ATT S4, Baseband Version : I337UCUAMF3 / BUILD: JDQ39 , if i was able to unlock how would i go about doing so? I was hoping i could do something with Loki if not? How does Loki work exactly as well?
Congrats, you just voided your warranty. It will be 0x1 instead of 0x0.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Just FYI for you guys hijacking the thread. It is usually better for you if you start your own thread. Most people skim these threads and may lose track of who they were helping or give bad info to you thinking they were replying to the original question. Or, just skip the thread if they don't think the OP tiltle interests them.
You will get more direct answers and quicker help if you do. Or try to post here--
http://forum.xda-developers.com/showthread.php?t=2320430
Just trying to get you faster and more accurate responses--:good:
How did you root S4?
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
th3doorMATT said:
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Using Odin 3.10
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
th3doorMATT said:
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
Click to expand...
Click to collapse
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
Hmmm. I still don't know why it fails but when I get home I'll have to let you know. I've deleted several after failing. I'm sure I can find them again and I think I still have a few as well so I'll let you know.
CF Auto Root and Towelroot
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I've used both CF Auto Root, Towelroot, and Motochopper guides and none of them have worked.
The only file I have on my computer is: philz_touch_6.08.9-jflteatt.tar.md5 as one of the files I used but that didn't work. I actually had already downloaded the files from the article you had linked but I didn't get around to it yet, I'm going to try that method out in about 15-30mins and see what happens.
It worked!
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Followed everything on that post and it worked! I'm rooted!
Though I'm not sure if you know about custom recoveries. I'm having issues with installing any of them and having it work. I am currently trying Safestrap and for some reason it won't install the recovery. It'll go through the process, but the state of the recovery won't change or anything.
I ultimately want to install CM11, but I'm really struggling to find a way that works!
unlocked bootloader.....
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
I still can't figure how to install the .apk file from kingroot..? How do you install the file to root it..?
Note: Relevant device info will be provided below.
Dear techwizards,
I've been trying to root my phone for a while, I've done it before: both my S II and S III were international variants, and rooting those devices was very simple. But after getting an S IV from America and consensually downloading a samsung issued update -- I had yet to read up on the disadvantages of knox -- my rooting and android experience took a turn for the worse.
Long story short -- I know developers are a proud bunch who value their time -- I tried rooting my phone yesterday after almost smashing my phone on a coffee table. They say it's a well known side effect of Touchwiz, but I'll leave that to you.
I used a towelroot.com root -- a wonderful tool, if I may say so. After that, I visited the CM website and picked out the compatible CM11. I never got to flashing it though, as my problems arose while installing a recovery.
I had downloaded an app, a something recovery or another. They had an option to flash recoveries on there--it would download your recovery for you and do all the work, which seemed plausible as most video tutorials demonstrated. To my astonishment, doing so bricked my phone.
I tracked back, looked for the samsung stock rom, downloaded all 2.2 gb's of it and flashed it. It worked. My phone was functional but I suspect something within it stinks. My device, apparently for security reasons, wont let my wifi or 4g to establish a connection. It's making it impossible for me to fix this problem as I can't root my device or flash a custom rom.
About Device:
Pre problem I was running a:
SGH-I337UCUFNC1 baseband. Build Number ending with: NC1.
Android version: 4.2.2
Post problem:
Baseband: I337UCUFNC1
Build Number: JSS15J.I337UCUEMK2
Android version 4.3.
If I could find my original stock 4.2.2 NC1 version and get simple instructions on how to re-install it back to stock version, I'd be very grateful.
If you know how I could fix the internet issue on the MK2 one, and provide some simple instructions of how to root it, I'd be grateful too.
If you think neither would work, and have something else in mind, Im open to your suggestions.
Much Regards,
Y
You can only use safestrap for the recovery. See in the general forum index, all things at&t....
You can't flash cm, only touch wiz based roms
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You can only use safestrap for the recovery. See in the general forum index, all things at&t....
You can't flash cm, only touch wiz based roms
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I never got to installing or attempting to install CM.
Things took a turn for the unexpected after I tried installing CMW recovery.
Please reread my post
I've read it. You can't install cwm. That's what had messed up your device. The only recovery you can use is safestrap
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
I've read it. You can't install cwm. That's what had messed up your device. The only recovery you can use is safestrap
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I see. Thanks for the info. Do you know what could be done to restore my device to stock? As of now I'm running a MK2 Android 4.3 on a NC1 4.2.2 device and the wifi/4g connection aren't working.
androidshmandroid said:
I see. Thanks for the info. Do you know what could be done to restore my device to stock? As of now I'm running a MK2 Android 4.3 on a NC1 4.2.2 device and the wifi/4g connection aren't working.
Click to expand...
Click to collapse
Did you look for the thread I pointed you to? In the general forum index, all things at&t... You're going to want to start there. That'll link you to this
http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Since your bootloader is already locked, you might as well Odin to stock. Odin to NB1 then use stock recovery to flash the NC1 update from a zip file on a microSD.
Part of the problem is that the NC1 is not 4.2.2 like you listed, but 4.4.2. That's the update you applied that started the sordid tale. When you were on 4.2.2, with bootloader MD<something>, you could have flashed CM or whatever, because you would be able to have TWRP or CWM recovery. When Samsung pushed out a 4.3 update (MK2 I believe) all the unlocked bootloader fun was over, probably permanently for this phone.
When you flashed MK2 firmware (4.3) onto the phone, parts of it don't work with the NC1 baseband, causing the problems you've seen. If you Odin NB1, then do the quick zip update from stock recovery to get all the way to NC1, you'll be back to stock and everything should work.
Once that's done, you can go through this process:
1. Root with Towelroot.
2. Install SuperSU to manage root access. (You might have to reboot, it's a 50%/50% shot... sometimes it hangs trying to disable Knox... no worries just reboot)
3. Install SafeStrap... it will create the safestrap recovery. You might need to install SELinux Mode Changer app (from play store) and set to permissive, to get Safestrap installed.
4. Boot to the SafeStrap recovery. Install any touchwiz rom. Only touchwiz compatible roms will work. I liked GoldenEye.
When installing touchwiz ROMs, typically one flashes the ROM, then SuperSU, then the NC1 modules, then the ATT BuildProp/APN file. Sounds complex but goes quickly. Some roms have some of these things built in.
Good luck! I eventually decided I didn't like the ATT Samsung restrictions of the locked boot loader, and bought a T-Mobile M919 variant of the S4. Unlocked boot loader. Woo hoo. And works fine on ATT.
Marc