Hi all again,
I must saw I've NEVER had to do so many posting for a single phone... anyway.
I just updated my Leo to 1.61 via a tortuous goldcard process and the proximity sensor is still not working correctly My wife is the main user of the phone and I was watching her while on a call- the screen was on and off like some demented Xmas lights.
I have a theory regarding the problem. It's only my wife who has the problem with the phone, it's seems ok with me (but I don't use it as much!). The phone is very wide, and the proximity sensor is not central. I think that the sensor is missing her ear (she has small ears!). The gap between her ear lobe top and her head is too great for the sensor. I tested the sensor gap with my thumb and it seems to be around 1cm to activate.
The hardware solution is either move the sensor so it's central (that's not going to happen soon) OR increase the sensitivity of it.
Does anyone know how to change the sensitivity of the sensor OR anyway to completely disable the touch screen during a call.
Hmm I can not believe that, I've tested my sensor:
It put the lights out if i come closer that 1,5 cm next to the screen during a call. So it think this is not the source of your problem.
But: I'm running a 1.48 rom...
I had the proximity sensor behaving eratically upon installing a screen protector. Even though I installed the original HTC screen protector which has 2 holes to position exactly over the sensors but even then I had problems. Ever since removing the screen protector everything is okay again.
Just thought if your problem also coincides with installing a screen protector.
Regards
The problem occurs when your hair overlaps the proximity sensor, the light immediately comes on. Stick the phone back to the ear and the proximity sensor works perfectly on time.
p.s. ive long hair and I too faced this problem and figured it out by running a few test as mentioned above ;-)
Hope this helps.
well, I'm having the same problem and It's not caused because of my hair. it just sometimes works and sometimes doesn't. the test I make is using the palm of my hand. if during one call It's not working, it won't work no matter what you do. then if I make a call and its working, I can turn on and off the screen placing my hand in front of the sensor..
jpresencia said:
well, I'm having the same problem and It's not caused because of my hair. it just sometimes works and sometimes doesn't. the test I make is using the palm of my hand. if during one call It's not working, it won't work no matter what you do. then if I make a call and its working, I can turn on and off the screen placing my hand in front of the sensor..
Click to expand...
Click to collapse
I reckon you clear the area around the receiver and try doing a hard reset.
CAUTION: Take an individual back of your data rather than doing a full backup using some software.
same problem
Hi, I have the same random proximity sensor bug problem. During call accidental hang-up happens every day. I have short hair and no screen protector. Is there any solution for this yet? thanks.
I wrote to HTC already, but they claim there is no problem reported. Sory for my English.
Had a similar problem. My proximity sensor is now working fine. Install the 'Proximity Sensor for Screen Off v0.2' cab. Search the forum for the thread.
thanks for tip, hope this little app will "evolve"...
hi,
i had the problem with the proximite, that it is only working when the phone is in portrait mode. when im incall and portrait i can put my finger to the sensor and it is working perfect. when i rotate the display to landscape the sensor does nothing and the display stays on. unfortunatly i turn the phone sometimes on the way to my ear, and so the screen stays on.
i will try now the mentoined .cab and see what it does for me.
regards mad
I have two SGS4's. On one, when I place a call, the call screen stays on and it turns off when I raise it to my ear. It then turns on when I pull it away.
On the other, as soon as I place I call the screen goes dark. The only way to get it back is to push the power button and unlock the phone.
The "Turn screen off during a call" setting is set on both phones.
Anyone have any idea what is causing this? Next step is to do a wipe, but that just sucks.
I'm on stock and not rooted.
Thanks!
Sadly I have the same issue on mine but not my wifes.... hope somebody knows something or maybe the rumored update thats going to be coming out will have a fix?? I dunno...
jprocket45 said:
Sadly I have the same issue on mine but not my wifes.... hope somebody knows something or maybe the rumored update thats going to be coming out will have a fix?? I dunno...
Click to expand...
Click to collapse
Have you tried doing a reset yet? I'm hesitant since it's a pain to restore everything the way I like it. Definitely a weekend task.
Sirchuk said:
Have you tried doing a reset yet? I'm hesitant since it's a pain to restore everything the way I like it. Definitely a weekend task.
Click to expand...
Click to collapse
I have done a reset it solved it a little I guess but still having issues once in a great while all works well id blame it on the otterbox case but my wife has one so dunno if that could be the issue you have a case on urs never really played with the phone outside of the case lol
Sent from my SPH-L720 using xda app-developers app
jprocket45 said:
I have done a reset it solved it a little I guess but still having issues once in a great while all works well id blame it on the otterbox case but my wife has one so dunno if that could be the issue you have a case on urs never really played with the phone outside of the case lol
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Nope, mine is naked for now. I'll have to do a reset today/tomorrow and see if that solves my issue. If not, I'm taking back to the store for an exchange. It's only been a couple of weeks.
To late for me to take it back but suppose to be a update coming soon that does alot of fixes so we will see Good luck like I said reset I did notice fixed it a bit let me know how it goes I'm threw sprint just curious if you have them only reason I ask if it's just a carrier issue with software or something I doubt it but just figured to see who you had lol
Sent from my SPH-L720 using xda app-developers app
Dial *#7353# and make a test
sent from my Galaxy
samersh72 said:
Dial *#7353# and make a test
sent from my Galaxy
Click to expand...
Click to collapse
That's what I was looking for!
Sure enough,the proximity sensor was always on and wouldn't go off.
I'm with T-Mobile and they have a 30 return/exchange policy if you buy it outright, which I had, so it only took about 10 minutes for them to exchange it!
Thanks for the testing code! XDA comes through once again!
Same problem when I'm making a call, the screen goes blank when I put it to my head and when I remove it nothing happens.
I tried *#7353# and the proximity sensor goes of but will not stop..
I'm currently rooted, could it solve the problem to go back to stock?
Possible Fix
jprocket45 said:
Sadly I have the same issue on mine but not my wifes.... hope somebody knows something or maybe the rumored update thats going to be coming out will have a fix?? I dunno...
Click to expand...
Click to collapse
I have had the same problem over the last 3 weeks and decided to take a gamble. I tightened up all the screws on the device and squeezed real hard on the area where the prox sensor is and poof... it works. I have no idea what was up but I feel like the sensor is loose and the pressure resolved the issue. Many other post have talked about cleaning the area over the prox real good and it works but I think its the pressure that is actually fixing the issue. Anyone else have any ideas? Sorry if this was posted incorrectly, I have never posted before but I felt this issue is a PITA.
I have i9500. Unrooted with latest OTA update installed (Build XXUBMG1).
I've been having the same problem with proximity sensor. When proximity sensor is enabled during phone calls (both regular calls and Viber calls), the screen is disabled. Also, my screen sometimes remains on during the call until I place it to my ear and sometimes it turns off immediately during the call. It wasn't always like this, but I can't remember when it started happening, but I suspect it was since the last OTA update.
I've searched around online and have noticed several comments.
Apparently this is an issue with several Galaxy models over the years (sorry, I lost the reference) and this thread: http://forum.xda-developers.com/showthread.php?t=2208440&page=2 mentions Galaxy Note 2 and SGS3 having the issue where there is something wrong with the threshold setting in the calibration settings. Mine appears to have the same issue where it always reads 0cm (i.e. always covered). However this thread also suggests a fix to input some code to adjust the calibration if your phone is rooted.
One suggestion is there is a misalignment of the sensor and so it might be partially covered by the phone's front fascia, causing the sensor to always read as covered or "1" or 0cm. But looking carefully at mine, it looks centred dead-on.
This thread http://forum.xda-developers.com/showthread.php?t=2417401 indicates that the sensor is always on as can be seen through a digital camera LCD (but not with your naked eye). I've tried this with my DSLR and confirmed this also happens with mine, even when the option is set to turn it off during calls, and also even when air gesture (which uses the prox sensor) is turned off. Not sure if this affects the problem or not though.
Can't remember where I read this, but someone mentioned that when shining a bright light over the phone, it works. So I downloaded two sensor apps from Google Play: Android Sensor Box, and Proximity Sensor Finder. And also used the inbuilt *#7353* feature. All three report that my proximity sensor is always reading that something is constantly covering it..... EXCEPT when a bright light (the sun works) is shining on the light sensor - not the proximity sensor. I tested this by using a torch on both sensors. When blocking light from the light sensor, the problem persists, but not when I allow the light to shine on the sensor. So it appears that they both act in unison.
Similar issue with air gestures, which used to work when my phone was new, even in relatively ambient light (but obviously not in a dark room), but now doesn't under similar conditions, and again... EXCEPT when a bright light is shining on the light sensor, or when I'm out in the sun.
Anyway, I'm not willing to root my phone at this point, just to try the fix suggested in http://forum.xda-developers.com/showthread.php?t=2208440&page=2 (my phone was bought overseas and returning it wouldn't be convenient for me). And since this wasn't always a problem with my phone, I suspect it is a software problem related to one of the recent OTA updates.
Edit: After further testing, it seems that air gestures use the front camera as well as the light and proximity sensors.
My proximity sensor works - when I go into diagnostic, it goes green when I bring a hand near the sensor - my issue is that it doesn't seem to notice when I remove my hand and there no longer is anything proximal - until I hit the back button to exit the test. Other than blowing out the earphone jack, does anyone have a suggestion?
Thx.
divche said:
I have i9500. Unrooted with latest OTA update installed (Build XXUBMG1).
I've been having the same problem with proximity sensor. When proximity sensor is enabled during phone calls (both regular calls and Viber calls), the screen is disabled. Also, my screen sometimes remains on during the call until I place it to my ear and sometimes it turns off immediately during the call. It wasn't always like this, but I can't remember when it started happening, but I suspect it was since the last OTA update.
I've searched around online and have noticed several comments.
Apparently this is an issue with several Galaxy models over the years (sorry, I lost the reference) and this thread: http://forum.xda-developers.com/showthread.php?t=2208440&page=2 mentions Galaxy Note 2 and SGS3 having the issue where there is something wrong with the threshold setting in the calibration settings. Mine appears to have the same issue where it always reads 0cm (i.e. always covered). However this thread also suggests a fix to input some code to adjust the calibration if your phone is rooted.
One suggestion is there is a misalignment of the sensor and so it might be partially covered by the phone's front fascia, causing the sensor to always read as covered or "1" or 0cm. But looking carefully at mine, it looks centred dead-on.
This thread http://forum.xda-developers.com/showthread.php?t=2417401 indicates that the sensor is always on as can be seen through a digital camera LCD (but not with your naked eye). I've tried this with my DSLR and confirmed this also happens with mine, even when the option is set to turn it off during calls, and also even when air gesture (which uses the prox sensor) is turned off. Not sure if this affects the problem or not though.
Can't remember where I read this, but someone mentioned that when shining a bright light over the phone, it works. So I downloaded two sensor apps from Google Play: Android Sensor Box, and Proximity Sensor Finder. And also used the inbuilt *#7353* feature. All three report that my proximity sensor is always reading that something is constantly covering it..... EXCEPT when a bright light (the sun works) is shining on the light sensor - not the proximity sensor. I tested this by using a torch on both sensors. When blocking light from the light sensor, the problem persists, but not when I allow the light to shine on the sensor. So it appears that they both act in unison.
Similar issue with air gestures, which used to work when my phone was new, even in relatively ambient light (but obviously not in a dark room), but now doesn't under similar conditions, and again... EXCEPT when a bright light is shining on the light sensor, or when I'm out in the sun.
Anyway, I'm not willing to root my phone at this point, just to try the fix suggested in http://forum.xda-developers.com/showthread.php?t=2208440&page=2 (my phone was bought overseas and returning it wouldn't be convenient for me). And since this wasn't always a problem with my phone, I suspect it is a software problem related to one of the recent OTA updates.
Edit: After further testing, it seems that air gestures use the front camera as well as the light and proximity sensors.
Click to expand...
Click to collapse
Proximity sensor
I had problem with proximity sensor in my galaxy s3 mini but my rear camera had error and fc also.I tried everything and nothing work.Finaly I open device and disconect camera and connect it again and camera started to work.But for my suprise proximity sensor now works perfect and I did not touch it.I can't explain what happend but I am happy.
I guess what it comes down to is.....for some you can reset the sensor, for some they can blow it out with compressed air, but others actually have to take apart their phone to fix this issue.
marduj5 said:
I had problem with proximity sensor in my galaxy s3 mini but my rear camera had error and fc also.I tried everything and nothing work.Finaly I open device and disconect camera and connect it again and camera started to work.But for my suprise proximity sensor now works perfect and I did not touch it.I can't explain what happend but I am happy.
Click to expand...
Click to collapse
hi
i have the same problem. any solution guys ?
( BTW - im on NB3 INS firmware )
I think I summarized the available solutions just before your post. There is no single thing which always works, you'll need to go through and see which fixes yours. This happens primarily because of hardware, with the sensor getting dirty - so it comes down to how invasive the procedure to clean it.
Shohat said:
i have the same problem. any solution guys ?
( BTW - im on NB3 INS firmware )
Click to expand...
Click to collapse
Hubris2 said:
I think I summarized the available solutions just before your post. There is no single thing which always works, you'll need to go through and see which fixes yours. This happens primarily because of hardware, with the sensor getting dirty - so it comes down to how invasive the procedure to clean it.
Click to expand...
Click to collapse
i'm sorry. i already tried your first solution and it worked like charm ! thank you ! :good:
HOw to solve, none of this works. How cann i clean proximity?
I found this topic about the design flaw:
http://forum.xda-developers.com/showthread.php?t=2129140&highlight=proximity
I've seen it myself, when I was reassembling my phone. Hardware design for that particular part is absolutely HORRIBLE.
It happened after changing the motherboard on my phone. In-call screen turns off immediately and doesn't turn on until the call ends.
Proximity sensor seems to work OK when it is out of its place on the phone, but after placing it back, the path is blocked somehow.
I got a spare part to interchange, but it behaves the exact same way the previous did.
There is a rubber gasket, it fits nicely and holds sensors in place, but it might block the sensor. Without the rubber gasket, sensors are not fixed in place and they work inconsistently.
I am curious, if it is a special way it is assembled, or I am a dumb ass can't figure out how to place it properly.
Please help, otherwise it would be great to know, if there is a way to turn it off in software. Thanks.
bump
Tasker can turn off your proximity sensor while on call.. I think some custom roms also have that feature..
Would be great.
u can use proximity disabler
i lost the rubber thing when i changed the screen!!
i followed these two methods
i used proximity disabler from xposed framework to stop the proximity sensor
you can get that from
http://repo.xposed.info/module/com.mrchandler.disableprox
or follow this tutorial
or
i fixed that using a small cardboard an made two holes exactly infront of the sensor
and that fixed my proximity sensor for my nexus 4 and even made a video for the same you can check that at
Hi everyone,
Long story short, I got a used Nexus 4 off someone, everything works perfectly except the proximity sensor. During a call the screen blacks out and doesn't come back unless I hard reset the phone to hang up. I figured out it was a problem with the proximity sensor. Upon reading these forums and many other articles on Google about taking off the screen protector (which I don't have) and swapping the rubber "sensor" holder holes, I decided to open the phone up and take a look.
It appears that my phone is missing the rubber piece to hold the proximity and light sensors in place, making the sensor unusable and causing many issues with making calls. I've tried playing around with it using other peoples' suggestions and nothing has worked. I've decided to just find a way to disable the proximity sensor instead during a call, as I'll be quite satisfied with just a simple software fix.
Right now I am using Proximity Screen OFF to keep the screen on, but it drains my battery pretty hard. I was thinking to just flash my phone with a mod that allows me to turn the proximity sensor off during a call.
Any suggestions as to which mod contains this feature?
Thank you.
I tried installing the xposed framework but that threw a little notice saying it wasnt going to work. I looked for apps ont he app store but that didnt work as well..
Any ideas on how to disable the proximity sensor so when I turn the screen on it doesnt turn right back off?
Any help is greatly appreciated.
the issue might be your proximity sensor's alignment. it might not have aligned properly. there is a small black rubber holder to hold the proximity sensor. may be you might be missing it or might have loosen it. you can easily fix/align it, if you can open the back cover.
you can install a custom rom to overcome this sudden screen off issue. but when you taking a call your screen will be turning off until other user disconnect the call..
I suggest you fix/align the proximity sensor..
P.S:
There is a small troubleshooting step you can do to see whether your proximity sensor has a slight alignment issue. get a torch or good direct light source and point it directly at proximity sensor. if you can turn your screen on while pointing that light towards proximity sensor, you should have a very small alignment issue. there are plenty of proximity sensor test apps on play store too.
appsmarsterx said:
the issue might be your proximity sensor's alignment. it might not have aligned properly. there is a small black rubber holder to hold the proximity sensor. may be you might be missing it or might have loosen it. you can easily fix/align it, if you can open the back cover.
you can install a custom rom to overcome this sudden screen off issue. but when you taking a call your screen will be turning off until other user disconnect the call..
I suggest you fix/align the proximity sensor..
P.S:
There is a small troubleshooting step you can do to see whether your proximity sensor has a slight alignment issue. get a torch or good direct light source and point it directly at proximity sensor. if you can turn your screen on while pointing that light towards proximity sensor, you should have a very small alignment issue. there are plenty of proximity sensor test apps on play store too.
Click to expand...
Click to collapse
Interseting... My screen broke so I had it replaced and its been having an issue ever since. Also, I don't use it for calls. It is just sitting on a mount in my car most of the day running a few car apps. But it is in airplane mode basically all day lol.
Pr3dict said:
Interseting... My screen broke so I had it replaced and its been having an issue ever since. Also, I don't use it for calls. It is just sitting on a mount in my car most of the day running a few car apps. But it is in airplane mode basically all day lol.
Click to expand...
Click to collapse
that makes sense.. you also replced front housing too right? that's where that rubber proximity sensor holder attached.. if you replace original front housing with aftermarket housing that rubber holder probably won't come with it. most of the repair technicians don't know this.. if you still have the old front housing you should be able to recover it and attach to your new housing..
p. s:
or you should be able to buy it.
here it is
http://rounded.com/lg-g2-d802-rubber-proximity-sensor-module-mbl65540401.html#/product/21920 (also try ebay or aliexpress )
appsmarsterx said:
that makes sense.. you also replced front housing too right? that's where that rubber proximity sensor holder attached.. if you replace original front housing with aftermarket housing that rubber holder probably won't come with it. most of the repair technicians don't know this.. if you still have the old front housing you should be able to recover it and attach to your new housing..
p. s:
or you should be able to buy it.
here it is (also try ebay or aliexpress )
Click to expand...
Click to collapse
Honestly, if its possible I'd rather just disable it completely. I'd rather not open the phone up again if I don't have to and I will never use it for calls anyway.
Pr3dict said:
Honestly, if its possible I'd rather just disable it completely. I'd rather not open the phone up again if I don't have to and I will never use it for calls anyway.
Click to expand...
Click to collapse
if you're not using your g2 for calls, I'd recommend flashing a custom aosp rom. so you wouldn't get in to this sudden screen off issue while unlocking it..
appsmarsterx said:
if you're not using your g2 for calls, I'd recommend flashing a custom aosp rom. so you wouldn't get in to this sudden screen off issue while unlocking it..
Click to expand...
Click to collapse
That sounds exciting.. Lets do it!!!!!!!!!!!!