Hi! While I am new to this community as a poster, I have used CM ROMS since version 7 without issue (many thanks to leapinlar for learning me a few things!).
Now I have a problem to which I cannot find an answer. After loading CM 10.1.XX to SD Card via the instructions here -
most of the services shut down - Exchange & Gallery at first, then most apps, starting with Google Play. Here's what I have done:
1. Format SD card using SDFormatter (Sandisk 8GB Class 4 Micro SD card);
2. Burn image to card - have tried v5, 6 & 7;
3. remove card, reinsert, copy CM 10.1.xx.encore.zip (have tried 10.1.1, 10.1.2, 10.1.3)
4. Insert into NC, boot, then everything goes haywire.
With only the CM on the card, Exchange & Gallery both stop working ("unfortunately, xx has stopped working"). I disabled both, as I do not use Exchange, nor do I necessarily need the Gallery) Problem disappears. I then set up WiFi, shut down, copy gapps-jb-xx to the card from my PC, reinsert into NC, boot into SD Recovery, it does its thing, then shuts down. I start up the NC again, now the apps don't work - "unfortunately, GooglePlay has stopped working", "Gmail has stopped working", "process.gapps.x.x has stopped working", etc., until nothing works the way it is supposed to.
Now I have tried this several different ways, always starting with a clean (formatted) MicroSD card (I assume it's clean if it's formatted, right?), & am unable to keep everything working. I have flushed the caches, tried different combinations of the CM & gapps files, & nothing seems to work - these services/processes still shut down.
Could this be a hardware failure of some sort? Am I missing a step? Do I need to flush caches & clear data manually (not sure how to flush cache/Dalvik cache manually, but when setting up, the screen says "clearing caches")? I have used the alternate installs (uAltRAM, etc.) for automated flushing, but nothing works for me like it did in CM 7 or even CM 9. Any ideas? Thanks in advance for any help
rmazzeo said:
Hi! While I am new to this community as a poster, I have used CM ROMS since version 7 without issue (many thanks to leapinlar for learning me a few things!).
Now I have a problem to which I cannot find an answer. After loading CM 10.1.XX to SD Card via the instructions here -
most of the services shut down - Exchange & Gallery at first, then most apps, starting with Google Play. Here's what I have done:
1. Format SD card using SDFormatter (Sandisk 8GB Class 4 Micro SD card);
2. Burn image to card - have tried v5, 6 & 7;
3. remove card, reinsert, copy CM 10.1.xx.encore.zip (have tried 10.1.1, 10.1.2, 10.1.3)
4. Insert into NC, boot, then everything goes haywire.
With only the CM on the card, Exchange & Gallery both stop working ("unfortunately, xx has stopped working"). I disabled both, as I do not use Exchange, nor do I necessarily need the Gallery) Problem disappears. I then set up WiFi, shut down, copy gapps-jb-xx to the card from my PC, reinsert into NC, boot into SD Recovery, it does its thing, then shuts down. I start up the NC again, now the apps don't work - "unfortunately, GooglePlay has stopped working", "Gmail has stopped working", "process.gapps.x.x has stopped working", etc., until nothing works the way it is supposed to.
Now I have tried this several different ways, always starting with a clean (formatted) MicroSD card (I assume it's clean if it's formatted, right?), & am unable to keep everything working. I have flushed the caches, tried different combinations of the CM & gapps files, & nothing seems to work - these services/processes still shut down.
Could this be a hardware failure of some sort? Am I missing a step? Do I need to flush caches & clear data manually (not sure how to flush cache/Dalvik cache manually, but when setting up, the screen says "clearing caches")? I have used the alternate installs (uAltRAM, etc.) for automated flushing, but nothing works for me like it did in CM 7 or even CM 9. Any ideas? Thanks in advance for any help
Click to expand...
Click to collapse
A quick format with SDFormatter will not be clean. You need to do a full format. I suspect that is your problem.
One other thing you can do is install my alternate CWM so that you can wipe /system and /data between installs. See my section B in my NC Tips thread.
Sent from my BN NookHD+ using XDA Premium HD app
Thanks for the reply!
leapinlar said:
A quick format with SDFormatter will not be clean. You need to do a full format. I suspect that is your problem.
One other thing you can do is install my alternate CWM so that you can wipe /system and /data between installs. See my section B in my NC Tips thread.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks so much for your response! As soon as I get the chance, I will do a full format ("overwrite" rather than "erase" - the card does not support "erase", only "quick" & "overwrite"). I will also check out your tips & go from there. Thanks again for your reply & for all of your hard work!
To Leapinlar - awesome!
rmazzeo said:
Thanks so much for your response! As soon as I get the chance, I will do a full format ("overwrite" rather than "erase" - the card does not support "erase", only "quick" & "overwrite"). I will also check out your tips & go from there. Thanks again for your reply & for all of your hard work!
Click to expand...
Click to collapse
OK, so I followed your instructions, & I was obviously doing things incorrectly. Wiped the SD card completely with "full-overwrite" using SDFormatter, then, for good measure, formatted again with Windows (probably overkill, but I did it anyway); installed CM 10.1.3; cleared cache using your alternate install, installed compatible gapps, now everything just works! Sorry for wasting anyone's time, all I had to do was not be lazy in the SDFormat department & I would have had no problem. Thanks again & Happy Thanksgiving!
Related
ugh, here we go:
I am running cyanogenmod 4.04 with the latest recovery. I have the hard spl. I am not themed. I am using auto apps2sd with partions.
Soooo, this was working well until I had to take out my sd card for something. As soon as I did, the whole phone froze up, so I restarted. The first 'alert noise' that usually occurs after startup happpened at the end of the android screen. After this I was bombarded by a HELLUVA lotta force closes. I mean, all over the place. In these was included advanced launcher which I had my home set as as default. They would all loop, and I couldn't do anything. Oddly enough, the notification bar was still working, and I was able to view and answer an email!
My question is as follows:
1: what did I do wrong
2: what can I do to fix it.
-
For several reasons, I would really like to avoid wiping at the moment, so if there are any alternatives, I'd appreciate it.
1) took out sd card
2) fix_permissions in recovery
evilkorn said:
1) took out sd card
2) fix_permissions in recovery
Click to expand...
Click to collapse
Then I can put it back in and reboot?
EDIT: I did the above and nothing interesting happened.
It might be worth noting, however, that I rebooted without the sd card, installed ahome lite, and then didn't set a default home. I was able to use 'home' with the sd card in, and that works fine, as well as the apks packaged in cm (dialer, gmail, alarm clock ect.)
So basically it's like this with Apps2SD... say you are running Windows on your desktop, but you have all your programs installed to an external hard drive, you have a whole lot of programs up and running (not to mention you have your pagefile split across your drives - dalvik-cache), and you rip that external hard drive off. What do you expect to happen? Major system failure.
When you are running Apps2SD, the only time it is safe to remove your SD card is when the phone is NOT booted or booting. Meaning, it has to be off or in either the bootloader or recovery modes.
You may have to format the EXT partition of your SD card, wipe, and reflash your ROM.
daveid said:
So basically it's like this with Apps2SD... say you are running Windows on your desktop, but you have all your programs installed to an external hard drive, you have a whole lot of programs up and running (not to mention you have your pagefile split across your drives - dalvik-cache), and you rip that external hard drive off. What do you expect to happen? Major system failure.
When you are running Apps2SD, the only time it is safe to remove your SD card is when the phone is NOT booted or booting. Meaning, it has to be off or in either the bootloader or recovery modes.
You may have to format the EXT partition of your SD card, wipe, and reflash your ROM.
Click to expand...
Click to collapse
****.....let me see if I an access my sd card with this adapter, hold on.
ugh, put the card in and reboot into recovery and go to the console and type 'fix_permissions', you have to have cyan recovery or use the one with more options like the RA, link in sig, i think there is even an option for it and you don't have to type it in console.
My nook color stays not much longer than 1min after loading all the apps & just after that it reboots. I've tried installing a fresh rom couple of times & wiping each & everything but just after installing all the apps again, it reboots. Have tried both by installing it manually & restoring through titanium backup as well, but same result. It works fine only when I remove my micro sd. I know that some apps doesn't works when installing in micro sd & that's why I've installed all my apps in internal memory. I never faced that issue when I was using Phiremod v6.3 build. Recently after moving into the latest nightly build, this issue occurred. Please tell me how can I resolve this issue? I've been trying to find the solution from so many days but couldn't able to find. Thanks
You could use ROM Manager to restore the last ROM if you did a backup or just reinstall it. I am a little confused about what you mean by loading all the apps. Apps are generally loaded as you use them, not at boot up. When you first boot up you can usually see the SD card icon at the bottom of the screen before it gets mounted. It is possible the card got corrupted. If you don't have anything on it but app backups and it works fine when the card is out you could try reformatting the card on your PC or with a camera that uses micro SDHC cards.
You also might have a misbehaving app loading on startup.
When I first boot the system, the sd card icon shows at the bottom of the screen & disappears after loading all the games from it. After that I can see all my apps & games in app drawer but after a min, it gets reboot. I only have games in sd card, not a single app & neither any app in my internal memory which loads at startup.
Well if the nook boots and runs just fine without the SD-card inserted, then we can be pretty certain that something on the card is messed up. Lot's of possibilities: Corrupted .apk file, partially corrupted file structure on the SD-card itself, Hell it could also be auto-update panicking because it's trying to update an app that has yet to load off the SD-card.
First thing I would try is formatting the SD-card within CM7.
Also try turning off auto-update
If that fails, connect the SD-card to your computer and scan it with windows to check for any file table corruption.
If that fails, it's hard times ahead for you. You'll have to go through the apps one-by-one to see which one is being the little bastard.
Good luck.
Thanx for The help. But all I have on my SD card is just game. Before installing anything on my internal memory, I restored my games backup 1st to my SD card through titanium backup. It was then working absolutely fine. After that I installed apps manually just to see which app is causung error. But all were installed without any problem, used for a while then I manually reboot. Since then I am getting this issue.
Is this the right forum for support questions?
I have a MT4G running 2.2.1 rooted
I have been having this problem for a long, long time. I'm at my wits end.
If I remove the SD card, plug the phone in to the PC, shut down, or restart then the phone seems to forget how to access apps that are on the SD card. They show up on my home screen as the generic android icon(all of them the same) and don't appear at all in the app drawer. Apps not on SD work fine. I can go into Astro and see the files, all of them. I can open videos, music, pictures, etc. that are on it. But if I try to click on an app that is installed to it, it says "Could not launch the requested activity." App Manager shows the apps, but with generic icons and no info and all apps show computing instead of sizes. Settings>SD Card shows the card & the sizes but won't unmount.
On top of that, it won't let me install or uninstall any apps unless I remove the SD Card. Sometimes even when the SD card apps are showing up, I still can't install apps.
I've been at this for months now. I have tried EVERYTHING every single responder to previous posts has suggested. Pull the battery, pull the SD card, pull the sim card, unmount(would freeze and not do anything), reset, format, different SD cards in this phone(found those apps fine that I also had), this SD card in other phones(found it fine, but only the apps that that phone also had), This SD card in the PC with no phone(found it fine), mounting it through recovery, fixing permissions, deleting and reinstalling things, EVERYTHING! I am so far beyond frustrated at this point I'm going insane.
I can get the apps back after dozens of tries of pulling the battery, pulling the SD, rebooting, shutting down, etc in various orders and sometimes it takes days to get them back. But to then say, "OK they are back I'm never restarting again," is unrealistic and then of course apps stop installing/uninstalling and I have to reboot. And poof, gone again! :-/
I have everything thoroughly backed up with Titanium Pro and I did a Nandroid backup before doing a factory reset, but my god was that annoying having to redo everything, and it didn't even work. I've uninstalled apps individually to see if it was a specific app. I've done the reverse and uninstalled everything and reinstalled one at a time to see if one triggered it, and it kept happening randomly, never twice after the same app.
So the only conclusions I have been able to form are that it's not any of the apps, and it's not the SD card itself. Someone please, please put me out of misery and give me a new solution!
Try new SD card.If it is still happening, try flash anther Rom.
Thanks for the reply.
Tried new SD Cards already. Will see what new ROMs are out to try.
Out of curiosity, did you format the card to FAT 32?
ronin178 said:
Out of curiosity, did you format the card to FAT 32?
Click to expand...
Click to collapse
Yes. I formatted it on the pc and also tried a format in the phone the one time I was able to get it to unmount.
custom recovery
if you have a custome recovery try format the sd by this way try mount and unmount by recovery and say what happens
tl;dr
The card is tested and good (results below), the card reader is good (tested by reinstalling 5.7.4).
So few other people are having this issue, what is going on with my phone?
--
I've read and read, but no matter what I try, I can't get my SD card to work.
Here's the details of how, and what, I installed on my Sprint S5.
I'm coming from Resurrection Remix 5.7.4 MM, (where the SD card worked fine, but did have a few issues with the camera (used open camera instead) and some post reboot oddness (shortcuts disappearing)).
I first formatted card using the windows software sdformatter to FAT32
copied files to SD card using a card reader plugged into PC.
Files copied
RR-N-v5.8.2-20170304-kltespr-Official.zip
open_gapps-arm-7.1-micro-20170327.zip
UPDATE-SuperSU-v2.79-20161211114519.zip
TWRP 3.X
wiped dalvik/cache/system/data
then factory reset
added files to zip queue, Rom, then Gapps, then SU
Flashed
Phone boots fine, initial set up completes.
Tried a reinstall of apps using Ti Pro, but it failed, so started again and used google apps restore during boot. Issues with many apps. So started again, with a "fresh start" option during set up.
I took a few pictures.
I can view them immediately after taking, by pressing the previously taken image image inside the camera app.
Open default Gallery and get the error "No storage. No external storage available."
I installed a+ gallery and it is able to open the images just fine.
Default Files app can browse the SD card.
Aldiko will not download books, as it thinks there is no SD card installed
I've tried (and checking each time)
formatting in card as internal, then back to portable in phone.
Clearing the data/cache for the apps giving errors.
factory resetting
Wiping and formatting the card (on PC to FAT32), and starting again (several times).
Started from scratch again, with a brand new Sandisk card
Tried ZepherOS Zephyr-N Version (Viserion-6.1) Android 7.0
Wiping cache/dalvik only and rebooting
Same "No storage..." error, every time.
I tried ZephrOS. Right after install there is no file manager, but if I click the default app "downloads", I can navigate to the camera folder, then to the image. When I click on it, it opens the image, but still shows the same error "no storage..." even though I'm looking at the image behind the error window. :/
I'm running H2testw, but don't expect an issue, as the same error was on the previous card and the brand new card.
Can I go from 7.0/7.1 to a stock ROM without issues, if so which one?
Update:
SD card test result
Test finished without errors.
You can now delete the test files *.h2w or verify them again.
Writing speed: 7.15 MByte/s
Reading speed: 15.7 MByte/s
H2testw v1.4
UPDATE #2:
I started fresh with a new install of RR 5.7.4 and the card does still have issues with some apps, but is working fine with others. Open camera works fine, and the gallery access the correct card in this ROM. Aldiko still fails as it's trying to download to /sdcard
Most apps are looking for /sdcard but I have /sdcard1
If it helps, it appears sdcard is symlinking to /storage/self/primary
Anyone able to help?
permissions issue? have you gone into the apps mgmt and set the permissions manually?
youdoofus said:
permissions issue? have you gone into the apps mgmt and set the permissions manually?
Click to expand...
Click to collapse
Thanks for the reply. Yes, settings>apps>settings>App permissions>Storage is turned on.
Aldiko, for example, is looking for /sdcard but it doesn't exist. I'm thinking a symlink might fix the issue? But am not familiar enough with Android under the hood, to know what other issues that might cause.
syco123 said:
Thanks for the reply. Yes, settings>apps>settings>App permissions>Storage is turned on.
Aldiko, for example, is looking for /sdcard but it doesn't exist. I'm thinking a symlink might fix the issue? But am not familiar enough with Android under the hood, to know what other issues that might cause.
Click to expand...
Click to collapse
im not familiar enough with the under the hood stuff to know what else coul be the issue either, @AthieN, Mr. guru thoughts?
youdoofus said:
im not familiar enough with the under the hood stuff to know what else coul be the issue either, @AthieN, Mr. guru thoughts?
Click to expand...
Click to collapse
What file system is the card formatted in? Try ext4 or exFAT.
AthieN said:
What file system is the card formatted in? Try ext4 or exFAT.
Click to expand...
Click to collapse
FAT32 this was recommend in most places I read. I thinks it's a paths issue. I'm not sure the format would make a difference to that, right?
syco123 said:
FAT32 this was recommend in most places I read. I thinks it's a paths issue. I'm not sure the format would make a difference to that, right?
Click to expand...
Click to collapse
A fresh install would resolve any path issues. The device can't read the card, which means that it's formatted incorrectly or is incompatible. How did you format it originally? On a computer? Go into the storage menu, and if it's detected, then try using the native Android option to reformat it. Back up your stuff first.
If that fails, try formatting it in recovery.
AthieN said:
A fresh install would resolve any path issues. The device can't read the card, which means that it's formatted incorrectly or is incompatible. How did you format it originally? On a computer? Go into the storage menu, and if it's detected, then try using the native Android option to reformat it. Back up your stuff first.
If that fails, try formatting it in recovery.
Click to expand...
Click to collapse
thanks for chiming in sir! your help is always appreciated
AthieN said:
A fresh install would resolve any path issues. The device can't read the card, which means that it's formatted incorrectly or is incompatible. How did you format it originally? On a computer? Go into the storage menu, and if it's detected, then try using the native Android option to reformat it. Back up your stuff first.
If that fails, try formatting it in recovery.
Click to expand...
Click to collapse
Thanks, I know the OP was long, but I hoped the details of what I'd already tried would be appreciated. I did several fresh installs trying to fix, and formatted every which way I could in phone and on a PC. Nothing has worked.
I've kind of given up on this and have decided to switch to Verizon. Sprint sucks so bad, after 10 years I've finally had enough, so I have to replace the phone anyway.
If you know of a decent phone to get, I'm looking for a recommendation in this thread, https://forum.xda-developers.com/android/help/switching-to-verizon-200-phone-t3588790
Thanks for your attention to my issue. Sorry it's left unresolved. I run my own business and just can't spend this much time fixing my phone.
So I installed LineageOS about 4 months ago or so and out of nowhere the phone just turned itself off and wouldn't boot, it goes past the motorola screen into the LineageOS booting screen, and it just keeps loading and loading, I can access TWRP, and I tried installing an older version of LineageOS and wiping the cache and dalvik, that seemed to have worked but the home button wouldn't work and some core system thing kept crashing and warning me on the screen and I decided to reboot, and now I'm stuck at the booting screen loading forever again, basically I'm trying to NOT wipe the phone data UNLESS I'm able to backup my apps with titanium backup or something like that; so since I managed to make it boot once maybe it ain't as bad as I see it, so yeah here hoping to get some options to fix it.
dante0397 said:
So I installed LineageOS about 4 months ago or so and out of nowhere the phone just turned itself off and wouldn't boot, it goes past the motorola screen into the LineageOS booting screen, and it just keeps loading and loading, I can access TWRP, and I tried installing an older version of LineageOS and wiping the cache and dalvik, that seemed to have worked but the home button wouldn't work and some core system thing kept crashing and warning me on the screen and I decided to reboot, and now I'm stuck at the booting screen loading forever again, basically I'm trying to NOT wipe the phone data UNLESS I'm able to backup my apps with titanium backup or something like that; so since I managed to make it boot once maybe it ain't as bad as I see it, so yeah here hoping to get some options to fix it.
Click to expand...
Click to collapse
With titanium backup its possible to restore data from a nandroid backup.
Did you installed exactly the same rom over the actual one again? Did you tried wipe cache and art?
Make a backup of system, data, boot and save it to your computer just in case.
strongst said:
With titanium backup its possible to restore data from a nandroid backup.
Did you installed exactly the same rom over the actual one again? Did you tried wipe cache and art?
Make a backup of system, data, boot and save it to your computer just in case.
Click to expand...
Click to collapse
When the phone got stuck at the loading screen I tried installing an old LineageOS rom, that initiated with the errors I mentioned, and when I did that I wiped the cache and dalvik/art cache as well, and now I've tried deleting them again many times and it doesn't seem to work, and quick question, the nandroid backup is basically doing a backup of what you told me, system, data and boot, right? Would that save all apps and their data, let's say, a progress in a game, or all settings exactly like I left them on an app.
Also I don't know if it's me, but I keep deleting some data from my SD card and it just keeps reappears again, even tho I'm seeing them getting deleted, same with pasting new stuff on my SD card, I'm doing all this thro my PC with ADB, tho pasting and deleting stuff on the internal storage works just fine.
Yes, a nandroid backup from your system/data partition saves all your additional apps with settings.
strongst said:
Yes, a nandroid backup from your system/data partition saves all your additional apps with settings.
Click to expand...
Click to collapse
Yeah it says my SD card is on "Read-only" and can't complete the backup, according to some thread it's a FAT error and I gotta mount the SD card on my PC and fix the error thro windows, but I have no SD card reader, meanwhile I'll wait for other answers until I find an SD card reader.
The issue was most likely caused by updating LineageOS many times over and over again eventually causing a corruption, that and my micro SD dying and just being read only made it worst, so yeah, I'd recommend erasing cache, dalvik and system every few months to update LineageOS, well I wouldn't take this that seriously, since I don't really know that much, but yeah, phone is working just fine now, just installed everything from scratch and google helped me restore my apps.
dante0397 said:
Yeah it says my SD card is on "Read-only" and can't complete the backup, according to some thread it's a FAT error and I gotta mount the SD card on my PC and fix the error thro windows, but I have no SD card reader, meanwhile I'll wait for other answers until I find an SD card reader.
Click to expand...
Click to collapse
The isssue you are talking about(sd read only mode). Im facing this problem and have done each and every method possible to give write access to sd card.
Well i can access the data(like can put anything i want in it) but can't modify it(copy, move, delete and even format). I looked for way arounds and tried my own method(even risked the data on sd) but no good comes out of it.
Im using rr and not lineage so we are on different boats in the same river.
If you get any solution pls inform me ans ill try it.
DgnrtnX said:
The isssue you are talking about(sd read only mode). Im facing this problem and have done each and every method possible to give write access to sd card.
Well i can access the data(like can put anything i want in it) but can't modify it(copy, move, delete and even format). I looked for way arounds and tried my own method(even risked the data on sd) but no good comes out of it.
Im using rr and not lineage so we are on different boats in the same river.
If you get any solution pls inform me ans ill try it.
Click to expand...
Click to collapse
Some sdcards become read only over time, had also 2 of them which had those issues. See reviews on Amazon. It's a known problem of the SD card itself. Try to format your card with pc and check if it's writable again, otherwise it's dead.
strongst said:
Some sdcards become read only over time, had also 2 of them which had those issues. See reviews on Amazon. It's a known problem of the SD card itself. Try to format your card with pc and check if it's writable again, otherwise it's dead.
Click to expand...
Click to collapse
Thanks for the concern and yeah i know that it is a problem with sd cards.
The thing i was saying that i literally tried each and every method formatting from pc to even twrp. I even used cmd for it and as a out come non of them work.
Well sd card is not dead. I can move, copy thing in it the problem comes after that. I cant delete or then move from sd card to other location. Its like read only compact disk(it will clear the idea what im talking about). My sd card is working as a read only cd does.
DgnrtnX said:
Thanks for the concern and yeah i know that it is a problem with sd cards.
The thing i was saying that i literally tried each and every method formatting from pc to even twrp. I even used cmd for it and as a out come non of them work.
Well sd card is not dead. I can move, copy thing in it the problem comes after that. I cant delete or then move from sd card to other location. Its like read only compact disk(it will clear the idea what im talking about). My sd card is working as a read only cd does.
Click to expand...
Click to collapse
That's what I mean: they become read only. Search on Google.
I had the same issue. I tried reinstalling Linage OS, clearing the cache, etc. But what finally resolved it was clearing the data. So the issue was corrupted data that was keeping the device from booting.