Related
I not sure if this is the right area, if not, i apologize, feel free to move and/or flame. lol
Anyway, I'm running fr008 liberated froyo and all of a sudden my apps stopped showing up in the app drawer. the ones i had an icon for on the home screen would show up, but be the default little gear icon thing, on click, nothing would happen (market also because that icon and wouldnt work). I tried wiping dalvik cache, cache, and finally ended up just trying to restore nandroid. Wellll.... Now the market is gone totally, but the strange thing, is that the apps show up under settings->applications, but not in the drawer at all.
I searched on this site, but honestly...I'm not even sure what words to use, everytnhing just wasnt relevant to my search. I'll be happy to continue searching (and i'm still browsing through pages), but maybe someone has had this issue and can either help me out, or point me in the right direction. Thanks.
Try a different home app. LauncherPro is the best so far in my opinion.
Well, Ideally I would like to keep sense. that's why i had chosen the rom that i did instead of CM. I just don't understand why they were there working just fine, then all of a sudden they werent. Worse comes to worse I just flash cm7 and start over, i'm just giving it a couple days before i do that.
Astro also didn't show up, and i tried doing the .zip update method through clockwork, but i move the files over, then reset the phone, and they don't show up on the sdcard...So i reboot and check for the gapp.zip on the sdcard, and its no longer there. Wtf is going on?
**edit: for some reason the phone reset and the market showed up again. Obviously my apps are in my market account, but they still show up under settings->application. I still don't know *WHY* this happened, and i dont want to reload everything on it and lose the info i had, especially if its going to be a recurring thing.
Psionfenix said:
Well, Ideally I would like to keep sense. that's why i had chosen the rom that i did instead of CM. I just don't understand why they were there working just fine, then all of a sudden they werent. Worse comes to worse I just flash cm7 and start over, i'm just giving it a couple days before i do that.
Astro also didn't show up, and i tried doing the .zip update method through clockwork, but i move the files over, then reset the phone, and they don't show up on the sdcard...So i reboot and check for the gapp.zip on the sdcard, and its no longer there. Wtf is going on?
**edit: for some reason the phone reset and the market showed up again. Obviously my apps are in my market account, but they still show up under settings->application. I still don't know *WHY* this happened, and i dont want to reload everything on it and lose the info i had, especially if its going to be a recurring thing.
Click to expand...
Click to collapse
This is a total WTF! Since you are running FR008, are you using DT A2Sd to store your apps on the SD card? If not, you may want to look at this thread:
http://forum.xda-developers.com/showthread.php?t=790786
Once you enable A2SD by creating a EXT partition on your SD card, you can use A2SD to check the apps that are installed.
Yeah, my sd card has the ext partition from when i had the stock rom (trying to use dt's a2sd with that, got fed up and flashed fr008, haha).
But I only had a couple apps on the SD card, and strangely enough, those were the only ones showing in my app drawer. (now they aren't...)
But I'll check that link and see whats going on with it, i'm just lost. haha.
Psionfenix said:
Yeah, my sd card has the ext partition from when i had the stock rom (trying to use dt's a2sd with that, got fed up and flashed fr008, haha).
But I only had a couple apps on the SD card, and strangely enough, those were the only ones showing in my app drawer. (now they aren't...)
But I'll check that link and see whats going on with it, i'm just lost. haha.
Click to expand...
Click to collapse
If you had an EXT partition on the SD card when you flashed FR008 (which has DT A2SD built-in) will use it. Sounds like you may want to run the "a2sd check" command in the terminal emulator to see what's going on?
Hmm. I ran a2sd check:
it says "ext partition found, but not mounted, your rom may not be steup to run apps2sd. xxxxx
your partition may be ext4 but rom may not support ext4"
also, my apps are no longer showing up in market...i'm cursed. lol
a little update.
It seems my sd card was screwy. I swapped it for another one temporarily (copy/pasted the contents though, that didnt work, so i formatted it). The phone seems to work fine, but for some reason, my apps still show up in settings > applications. But no where else. I can't use astro to back them up, and I'm not sure what else i can possibly try (aside from wiping everything and installing a new rom, any suggestions on what rom, i'm thinking cm7, but i want sense ui still).
I'm just worried that its something *I* did and i dont want to do it again.
I had a similar issue before...and what I would do is:
1. Factory Wipe, Wipe Caches and Format both system and SDCard with an ext partition
2. Flash the ROM of your choice, then GAPPS
3. Start the process of setting everything up again.
It's the nature of the beast when using DT A2SD...when the card goes, so does everything on it, including your apps. It would be a great idea to back up everything on your phone (nandroid) then copy the nandroid backup (in the Clockworks folder on your SDCard) to a safe place (not on the SDCard) so that when this happens again you have a backup of your phone that doesn't die with the card. Don't worry this doesn't happen often, but a you see, it can happen.
Yeah, i sort of guessed it had to do with the sd card (had a small glitch about 3 days prior to this, with a program that was on the sd card). I just don't know why the apps that werent on the sd card went with the sd card, but showed up in settings -> applications still (though i could do nothing with them, and if i tried to "clear data" on them, it would fail). I flashed CM7 last night and started setting everything up again. I'm going to do the whole nandroid backup, and manual backup where i can pull the apks out of the backup, so i can have a script to reinstall everything quickly when I inevitably change roms again. lol (as you can see, i've been a member for some years now, started back with the titan/ppc6800)
anyway, if you didnt read all that above, i'll summarize:
THANKS.
i had the a similar problem my apps werent showing in my drawer and my widgets on my home screens kept saying problem loading widget so i wiped everything reinstalled my rom switched to adw ex and everything has been fine since
Is this the right forum for support questions?
I have a MT4G running 2.2.1 rooted
I have been having this problem for a long, long time. I'm at my wits end.
If I remove the SD card, plug the phone in to the PC, shut down, or restart then the phone seems to forget how to access apps that are on the SD card. They show up on my home screen as the generic android icon(all of them the same) and don't appear at all in the app drawer. Apps not on SD work fine. I can go into Astro and see the files, all of them. I can open videos, music, pictures, etc. that are on it. But if I try to click on an app that is installed to it, it says "Could not launch the requested activity." App Manager shows the apps, but with generic icons and no info and all apps show computing instead of sizes. Settings>SD Card shows the card & the sizes but won't unmount.
On top of that, it won't let me install or uninstall any apps unless I remove the SD Card. Sometimes even when the SD card apps are showing up, I still can't install apps.
I've been at this for months now. I have tried EVERYTHING every single responder to previous posts has suggested. Pull the battery, pull the SD card, pull the sim card, unmount(would freeze and not do anything), reset, format, different SD cards in this phone(found those apps fine that I also had), this SD card in other phones(found it fine, but only the apps that that phone also had), This SD card in the PC with no phone(found it fine), mounting it through recovery, fixing permissions, deleting and reinstalling things, EVERYTHING! I am so far beyond frustrated at this point I'm going insane.
I can get the apps back after dozens of tries of pulling the battery, pulling the SD, rebooting, shutting down, etc in various orders and sometimes it takes days to get them back. But to then say, "OK they are back I'm never restarting again," is unrealistic and then of course apps stop installing/uninstalling and I have to reboot. And poof, gone again! :-/
I have everything thoroughly backed up with Titanium Pro and I did a Nandroid backup before doing a factory reset, but my god was that annoying having to redo everything, and it didn't even work. I've uninstalled apps individually to see if it was a specific app. I've done the reverse and uninstalled everything and reinstalled one at a time to see if one triggered it, and it kept happening randomly, never twice after the same app.
So the only conclusions I have been able to form are that it's not any of the apps, and it's not the SD card itself. Someone please, please put me out of misery and give me a new solution!
Try new SD card.If it is still happening, try flash anther Rom.
Thanks for the reply.
Tried new SD Cards already. Will see what new ROMs are out to try.
Out of curiosity, did you format the card to FAT 32?
ronin178 said:
Out of curiosity, did you format the card to FAT 32?
Click to expand...
Click to collapse
Yes. I formatted it on the pc and also tried a format in the phone the one time I was able to get it to unmount.
custom recovery
if you have a custome recovery try format the sd by this way try mount and unmount by recovery and say what happens
I have a Nook Color. Somehow (and I really can't recall how), I can no longer get to the B&N side of my Nook. Even with the micro-SD out, I still go directly into CYANOGEN. To make matters worse, every single app I try to get from the market will not download. Once I 'Accept & download', the app starts to download then I get an Error overlay screen: "name-of-software" could not be downloaded due to an error.
So I have a V--E--R--Y generic tablet that can't do much. Please help.
Thanx in advance...................................
How did you go about installing CM7? Did you install it to the internal storage?
Please help!!! Noobie messed up NC (big time)
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
That's what I did...
That's what I did once. I unwittingly installed it onto the internal memory. It also happened to be really buggy. I restored it to stock using Clockworkmod Recovery. Did you use the installer for the SD card?
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
OP, do you intend to install CM7 into the internal memory?
All I'm trying to accomplish is to get back to the factory NC settings. Once I can get there, I'll decide.
How to hard reset and Factory Default Nook Color - http://goo.gl/pSFui
Power down your NC. Wait approximately 10 seconds or so-- just give it a bit of a break between shut down and factory reset.
Press and hold power button and your "N" home button almost simultaneously-- press Power first and then the N.
Hold these until your screen flashes the "Touch the future of reading" message; hold for a second or two afterward, then release. You will then get a prompt asking if you want to reset your nook to factory. Press the home button to continue. It will ask you to confirm. Press the home key again. Your nook will deregister, reset, and when it reboots, you will see "Kate" in her tutorial video, as if you'd never registered it in the first place.
(Obviously your account info will still be valid-- simply register with your email/pw combo instead of creating a new account.)
Hope this helps- if so please click thanks
Sent from my MB860 using XDA App
I did this (more than once - grrrrrrrrrrrrr!). I never see the "touch the future....." message. Instead, I get a cyanogen mod 7 screen with the message "Booting into Recovery". Then I get a sickly yellow-greenish screen that asks (twice) if I want to teset. I confirm both times then it "wipes" the data. It then boots into a cyanogen mod 7 screen (and the skateboarding 'droid) and I go through the registration process.
Now, when I select a Google app, the downloading (Google Maps) seems to be taking forever, but at least I'm not getting the error I got before.
Also, I do not see the progress of the download that I'm used to seeing on my phone. All I see is "movement" under the "Downloading..." message. How long do I leave it before I abort the download?
Your micro sd card is removed right?
Sent from my MB860 using XDA App
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card.
I put the ZIP file for: gapps-gb-20110828-signedgapps-gb-20110828-signed, and gapps-gb-20110828-newtalk-signed.
I tried the home-power key combo. It asks me if I'm sure that I want to restore to the factory. I say "Yes" but when the Nook starts up, I'm still in cyanogen mod.
Should I (re-)format the MicroSD, write 1gb_clockwork-3.2.0.1-eyeballer (or another version) then move recovery-clockwork-3.2.0.1-encore?
Aside from not being able to get back to B&N-supplied software, I can't do anything with the NC as an Android tablet.
Click to expand...
Click to collapse
Eyeballer is a clockwork recovery bootable SD image which is used to install stuff (e.g. CM7) to internal memory.
http://forum.xda-developers.com/showthread.php?t=1030227
VeryGreen (size agnostic thread) is the SD image which creates a full OS on the SD card itself leaving the internal memory alone.
http://forum.xda-developers.com/showthread.php?t=1000957
You have used the Eyeballer method and have therefore done an internal install. You must also have installed a CM7 zip not just the gapps zip as they are just google apps and not an actual ROM.
You have 2 ways forward.
The simplest is if you want to end up with internal CM7 and are not interested in running the B & N ROM. Start again by creating the Eyeballer SD card using win32diskImager. Make sure you use a real USB SD adapter and not a card slot on a laptop. Put onto the card the CM7 ROM zip. I recommend the one from the KANG MiRaGe thread in the development forum. It is the most up to date and stable version available at the moment. Also put on one gapps zip (20110828). Now put the card in Nook, Power up and when in recovery then use the menus to format system, data and cache. Do NOT format boot. Then flash the CM7 ROM zip, then the gapps zip. Power down and prepare a clean SD card either by reformatting the eyeballer card with something like the HP USB card utility or a partition manager in the PC like miniTools. You could also use a different SD card if you want to keep the eyeballer one for future use. Put the card back in, power up and you should now be in a stable CM7 environment where you can set up wifi, register with the Google market and download apps.
The second way if you really want to return to stock on the internal and run CM7 of the SD card then use the eyeballer method but instead of flashing CM7 and gapps you now use a return to stock zip. Make sure you still format the partitions as before.
http://forum.xda-developers.com/showthread.php?t=914690
Once you have it back to stock and upgraded to whatever stock you want then follow the VeryGreen method from the link above. Once the SD card has put CM7 on itself, do not worry that there is only a 114MB space if you ever put the card back in the PC. That is normal; it is just the boot partition that the PC sees. The rest of the card can be seen if you USB connect the Nook to the PC.
Yes it is. Also, even though I'm not getting an error, no apps are loading.
You absolutely rock!!!!!!!!!!!!!!
I'm back at the NC "baseline". I tried to go back to a 1.2 (which is what it came with) using "update-nc-stock-1.2-signed". Once I re-booted, it kept returning to the NOOK COLOR screen. Then I used a 1.0.1 from your last post. It came back fine with 2 exceptions. 1) I now have a message that I need to install a SD card. When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
mike11050 said:
That's part of the problem. I did not consciously install to internal memory, I wanted it to boot from the SD card.
Click to expand...
Click to collapse
I had this same problem. Since I am a new member, and can't post links, I'm going to try to help.
Install Clockwork Recovery to an SD card. Yes, the same way you did when installing clockwork to the SD the first time.
There are some threads on other fourms (google is your friend) that have links to Update files that allow you to update while keeping clockwork recovery, and some that will remove clockwork recovery. If you can remove the SD card and boot into the Stock Nook OS, then don't worry about installing 1.0.0 or 1.0.1 like some of the forms say. Just place the .ZIP file of the hacked update (usually 1.3 or 1.4 I think) into the root folder of the SD card, then Install it on your NC just like installing CM7 onto the internal memory. Your nook should start working again. It restored mine to full functionality. I can now pay 3 Dollars for angry birds, but at least its not as terribly slow and laggy as it was with CM7.
mike11050 said:
You absolutely rock!!!!!!!!!!!!!!
When I do, my (Windows Explorer) "Computer" screen only recognizes the SD card and not the Nook. These are piddly little issues, but if I can get them fixed, great! (Right now, I cannot upgrade the NC or move any books or load any apps.
Thanks again!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I had the same issue last weekend, somehow my internal memory had become unrecognizable to anything, and the local Barnes and Noble store had a SD card that repartitioned the internal memory, and I was back in business. And as an added bonus I now have the 4 GB app/BN partition and the 1 GB mostly useless partition.
mike11050 said:
On a 16GB microSD, I used Win32DiskImager to write 1gb_clockwork-3.2.0.1-eyeballer to a newly-formatted SD card. ...
Click to expand...
Click to collapse
The instructions I see when googling around where I see that image mentioned are instructions for installing onto the Nook Color internal memory.
In the simplest case, making an n2a card is much less complicated than that ~ all you need is on the PC, write the size agnostic image, then drop in the CM7 build you want to use, then put the card in the Nook and it creates itself. There are upsides and downsides to different n2a methods, but that one seems to be the easiest ~ I've done it successfully several times, and I'm certainly nothing like an expert when it comes to these Android systems.
A recovery card image will make a bootable recovery card ... and while that might not have been what you needed to get what you want, its what you need to get the nook back to stock.
You might want to go to
http://forum.xda-developers.com/showpost.php?p=22809801&postcount=148
... to get a version of the 1.4.1 upgrade that your recovery card can install. You'll probably have to wipe all sorts of partitions, which means you'll have to sign in with the B&N store again and you'll get to download you B&N apps again, but that's pretty straightforward.
This OP in this thread:
http://forum.xda-developers.com/showpost.php?p=10623716&postcount=1
... says that it will be necessary to format ("wipe") the /data and /system partitions, but it doesn't seem like you'll lose anything you want to keep. After all, you've either overwritten or completely tangled up your stock B&N info.
That post above has 1.4.1. There should be a signed 1.4.2 lying around somewhere, but if not, once its back to stock, you can update to 1.4.2 the normal way, download the B&N update file, drop it in the root of the Nook, make sure its at least 30% charged, and let it go to sleep, which will run the update file.
I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
Populating /dev using udev: done
Initializing random number generator....done
modprobe: chdir (2.6.32.9): No such file or directory
Starting network...
Detected Standard B&N nook layout, emmc first
It appears the SD card is already properly formatted
Skipping format
Mounting /dev/mmcblk1p1 as /boot
Looking for the install images....
Initial Install files not found
Please download it from nook.linuxhacker.ru
and put on first partition of this SD card
the name should start with updatei-cm and end with .zip
Click to expand...
Click to collapse
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?
First of all, have you done a nandroid backup in CWM? If so you can definitely recover.
Second it looks like your boot file is corrupted, always sending you to recover rather than a normal boot. What boot setup are you using?
echoedge said:
I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?
Click to expand...
Click to collapse
You have installed your ROM to SD. There is no CWM recovery on SD installs. You cannot do a nandroid backup with the SD recovery.
See my post here for an explanation of the difference between emmc installs and SD installs:
http://forum.xda-developers.com/showthread.php?p=25354258
However, there is a way to back it up. Keep reading further down in my post.
thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy
echoedge said:
thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy
Click to expand...
Click to collapse
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.
leapinlar said:
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.
Click to expand...
Click to collapse
Hmm.. somehow I got it doing that. I of course tried that before and only the two partitions were loading. This time I was messing with it and clicking the multi sd mount widget and somehow the boot drive came up and I transferred the files on there.
So now I can do a nandroid backup as usual? Or sense it's an (Alt) instead of a recovery thing must it be different?
I'll try some things in the mean time..
Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
edit: Yeah, the Alt files didn't work.. I reset and pressed the N button, went to alternate and SD card. Nothing.
Reset it and it works as usual, but still no ability to backup..
echoedge said:
Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
Click to expand...
Click to collapse
Do not use ROM Manager with the verygreen SD installation. It does not work. Use the boot menu to boot into the alternate. Hold the n key while booting. Choose sd, alt.
Edit: you said two partitions showed up. Did you physically take the card out and insert into a card reader in your PC? It should see just one drive. Make sure those two files are there or it will hang when you choose it in the boot menu. I suspect you put the files on emmc boot since you used that strange program to do it.
Sent from my Nook Color running ICS and Tapatalk
No,
it's something with the multi mount sd app widget.
I hook mini usb to usb.
then hit the widget.
and JUST the boot partition comes up.
It says something about disk F: is not formatted correctly as well.
Just plugging it in without the multi mount app the outward sd card partition and the nook color come up, just those two.
And can't believe I didn't think to take the mini SD out and use an adapter. I'll try it again with that.
You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.
echoedge said:
You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.
Click to expand...
Click to collapse
There are many threads here that will tell you how to restore stock to emmc. Search for them.
But to get the SD working, do what I said. And I would suggest getting rid of that mount program so you don't mess it up again.
Edit: The problem with those mount programs is, if you mount the wrong partition, windows can only read fat partitions and will ask you to format. System and data are ext4 which windows cannot read.
Sent from my Nook Color running ICS and Tapatalk
Thanks a bunch.
In ubuntu once the sd card is inserted all 4 partititions automatically came up so I was able to copy and paste the Alt images.
Am backing up right now
And yeah getting the emmc back to stop np.
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?
also, i assume all in eed to do to make a back-up on my hard drive or usb (so its not just inclusive to the minisd), i can just root browser into mnt/sdcard/clockworkmod/backup and and create a zip of the 2012.5.5.etc.etc.etc. made folder and trnasfer it onto external device? If needed all I would need to do is a transfer back?
echoedge said:
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?
Click to expand...
Click to collapse
Yes you can update the ROM. Just not with CWM. You place the update-...zip in the boot partition of the SD and then using the boot menu (hold n during boot) select SD and recovery. The script in the boot partition will install the ROM for you. You need to read the first post in the agnostic image thread. It tells you all this.
On the second question, you can do it that way, but the files are already compressed there so just copy the folder to your PC to archive them.
is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?
echoedge said:
is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?
Click to expand...
Click to collapse
Yes. I didn't know you could do it that way. See, you taught me something. LOL. As long as you are getting into the 3.0.2.8 CWM recovery it's OK.
Sent from my NookColor using Tapatalk
[Q] Chronic "Unexpected Lack of Boot Partition on the SD card! Please Report"
Hi,
First let me say - YES, i have searched all of the forums here (and a number of other sites) and seem to have tried almost every option.
I have Chronic "Unexpected Lack of Boot Partition on the SD card! Please Report" problems. The farthest I get guaranteed is the cyanogenmod boot and menu (if I try and bring it up). I'm simply trying to get the SD card with cm7 to boot reliably and not eventually loose the boot partition.
Off and on since spring I was able to burn a CM7 image (verygreen's size agnostic, and one or two others I have since lost track of) to a SD card; have had it boot to cm7 and it work for awhile - but then eventual degraded into the no partition found error. the majority of the time it just doesn't work and results in that annoying purple black screen.
When it does work, it only works for awhile and then the boot partition can't be found; a few very small 3 of times - if I copied a new update it woke back up ad worked for a couple of reboots then lost the partition again.
Anybody got time to take pity on my melted brain and take a few guesses?
Clearly I'm not only missing something - but as things have gotten worse, am now missing more (if that is possible) as I'm going backwards to see why it no longer works at all.
At this point wrong has happened so often, I'm just lost on what even worked way back when I started.
I'm trying to backtrack to where it at least worked a little for a few days...but noob world is decaying into worse world.
I tried a couple of other, older processes and a multiboot menu one that seemed promising (plus could handle the new naming conventions for 7.2 CM7); but that one never even got past the missing boot partition.
I have tried approx 10 2gb SDCards, Sandisk, Kingston, Unknown; Class 4 and mixed.
I have tried 3 8GB SD Cards, Sandisk, class 4
I have tried 1 16gb SD Card, Sandisk, class 4
I have tried a Vivitar Micro SD Card Reader
I have tried the micro SD card Adapters in a laptop, and then in a sandisk USB adapter.
I even tried doing it all using the Nook color via a USB cable.
I even tried leaving the nook color off and connecting the USB cable to the PC to initiate a boot.
Using Windskimager
Using SD formatter
Have formatted Full erase and overwrite.
Tried leaving partition size alone
Tried partition resizing up to 250mb
Tried cm7 zip alone and with gapps
WinXP on 2 desktops and a laptop
It sounds like you have run the gamut of attempted resolutions.
That message is part of the verygreen partitioning script that runs every time the verygreen recovery is run. So, that means the normal boot kernel for CM7 is not loading.
The way the verygreen SD should operate is it starts with uImage and uRamdisk on the boot partition. Those are verygreen's recovery files. The first time it is booted, it looks at your emmc to be sure it is a nook. Then it looks at the SD to see if it has been partitioned yet. If it is not, it partitions it into those partitions necessary for installing ROMs. After partitioning, it looks for a zip to install. If it does not find one, it shuts down and the next time it boots it does the same thing until it finds the first ROM zip to install. If it finds one, it installs it. The first time it installs a ROM, it renames those uImage and uRamdisk verygreen files to uRecImg and uRecRam and they become the verygreen recovery files. And it installs new uImage and uRamdisk files from the zip to become your CM kernel and ramdisk. These are what normally will load in the future to start CM.
Now, with the disk partitioned and CM installed, ordinarily, after the cyanomod logo comes up, it boots by default to CM via the uImage and uRamdisk files. If you intercede with the boot menu and tell it to boot to SD recovery, it looks for uRecImg and uRecRam to load the verygreen recovery. If that is loaded, the verygreen script does all its checking again, it verifies that emmc is a nook, then tries to verify if the SD is partitioned. If it is, it looks for a new zip to install. If, in checking to see if it is partitioned, it cannot find partition 1, it gives that message that has been bugging you.
So I see two things that are happening to you.
First, it is booting to the verygreen recovery first instead of CM. That could be due to a recovery bootloop happening. Look at my tips thread linked in my signature to see an explanation as to what that is and how to possibly get out of it.
Second, after it boots to the verygreen recovery, it does its checking and cannot find partition 1 of the SD and gives you that message.
What I cannot understand is, if you have no partition 1 on your SD, how is it booting to the verygreen recovery?
What you have not told us is what you have on emmc. Stock? Does it boot properly without the SD installed? Or does it go to stock recovery?
After this happens to you again, take the card out and put it in the PC. Tell us what you see. What files are there? Maybe look at it with Mini-Tool Partition Manager and see what partitions it reports.
leapinlar said:
What you have not told us is what you have on emmc. Stock? Does it boot properly without the SD installed? Or does it go to stock recovery?
Click to expand...
Click to collapse
Ditto on that - especially as it boots happily to that error message time after time after the green cyanomod screen appears and I can also do the menu trick to get it to go into recovery.
Just as a clarifier: A number of times it tried to do the install (text flowing by) and at the end claims it can't find the boot partition - odd (unless I have less of an idea of what I am doing than I think) as isn't all that running from that partition? A fairly even number of times it doesn't even run the install and just errors out right up front.
Once in a great while it all works, and I'm good for a few days - but eventually upon rebooting to get it back to normal (either by menu choice or by pulling the sd card) - all I get is that lack of partition again.
leapinlar said:
What you have not told us is what you have on emmc. Stock? Does it boot properly without the SD installed? Or does it go to stock recovery?
Click to expand...
Click to collapse
Yes with the SD card out it boots to stock, although a few time what looked like the CWMod menu came up after I shut down and started up without the SD card installed. Maybe only 2 or 3 times out of WAY to many boots to stock so the kids could read their books while I went to work.
I have even tried resetting the nook to factory on the off chance I did something dumb while mucking about to cause that.
leapinlar said:
After this happens to you again, take the card out and put it in the PC. Tell us what you see. What files are there? Maybe look at it with Mini-Tool Partition Manager and see what partitions it reports.
Click to expand...
Click to collapse
Will do so later tonight and will read the notes in your signature as well.
I saw something go by about the boot partition having to start at the 63 block or something - I can't believe ALL my SDcard adapters / writers are bad, but could the nook reader be screwy? Anyway to do a real test? I've been using the Easeus Partition Manager, but will try the Mini-Tool Partition Manager.
Thanks for the step by step explanation of exactly what happens in the process so I can again get a handle on what it's all doing. That all makes sense to what it looks like it tries to do. Deeply appreciate the time!.
You know, I am beginning to suspect something is wrong with your card reader built into the nook. Some sort of intermittent thing like a pin not making a good connection to the card. Put an ordinary SD in it and see if your stock can consistently read it.
Is your unit still under warranty? You might want to explore seeing if you can get it replaced.
Your downloaded verygreen image might be corrupted. Have you tried re-downloading it?
Sent from my NookColor using xda app-developers app
leapinlar said:
You know, I am beginning to suspect something is wrong with your card reader built into the nook. Some sort of intermittent thing like a pin not making a good connection to the card. Put an ordinary SD in it and see if your stock can consistently read it.
Is your unit still under warranty? You might want to explore seeing if you can get it replaced.
Click to expand...
Click to collapse
I had thought of that too - at stock it seems to have no problems reading consistently; I've done surface tests using partition manager - but haven't located any real other options of hard testing like once done for hard drives.
Plus the fact that sometimes, it will work for days before it craps out.
j8048188 said:
Your downloaded verygreen image might be corrupted. Have you tried re-downloading it?
Sent from my NookColor using xda app-developers app
Click to expand...
Click to collapse
A number of times - I went through and wiped all my downloads for the latest try.
Okay So As I mentioned I went back and wiped everything I had downloaded and restarted (again).
Current status is it's working BUT:
suspiciously too easy this time, worked first shot
- (having said that, I've had looking stupid and asking suddenly means it all starts working - so if it's that I'm good with this)
I've only rebooted into CM7, not back to stock at any time
Have not removed the SD card
I've not had time to load up the apps I like, just the kids games
- (sometimes I think it's the more wanted, the less reliable)
Obviously because I haven't removed the SD card, i haven't been able to retry things enough to recreate the other problems of boots right, yet can't find the partition when it really counts.
Changes (listing stupid things too, just because):
-Went back to my sandisk class 4 16gb HC card
-changed USB adapter back to sandisk one, using a sandisk micro to SD adapter that specifically says sdhc (although I think that is really just marketing
-Formatted the SD in the Nook x2, and did not use SDformatter
-Looked at the partition on the card with MiniTool not Easeus partition manager
-There is a step in verygreen's where you pop the card out and reconnect to the PC BEFORE adding the cm zip, made sure to do that - but could swear I had done it before.
Full painful boring steps that SO far has gotten it past the first stage of creation (again the full test is when I boot into stock a few times, or remove the SDcard for anything, or load my really wanted apps on the android side):
--Also note my lack of class 4 Sandisk cards, I only had one after all. BUT I have had this all work to this point with the 16gb only to have it go south.--
Painful details is so I can catch what is really worthwhile different as even WHEN I get it to work, I'm going back to try all the other cards because it worked so oddly and failed so oddly and differently - but that's just me.
> The 2GBs are:
6 Sandisk SD, don't see any class Rating
2 no brand SD, don't see any class Rating
1 Kingston SD, don't see any class Rating
> The 8gb are SDHC "Adata" Class 4 SDHC
> The 16gb is a Sandisk Class 4 SDHC
Using the 16GB Sandisk Class 4
--------------------------------
> Nook booted to stock
Inserted SD Card
Unmounted
Formatted sucessfully
unmounted and removed
> Put in Red SD / SDHC Adapter
Put in Sandisk MicroMate SDHC to USB Adapter
Put in Front USB spot
> Mounted as E Drive
E Drive shows standard Nook Folders:
.amdroid_secure
B&N Downloads
LOST.DIR
My files
> MiniTool Partition Wizard
Surface test = all good.
>Write the image on your SD card
Used Win 32 Disk Imager
After done with writing, eject and then re-insert the uSD card into your computer.
Two Partitions - 118 and 14.72gb
>Copied to card:
update-cm-7.1.0-encore-signed.zip
Installed correctly
configured wireless
Rebooted = OK
Rebooted = OK
>Turned off
Removed SD Card
Put in Red SD / SDHC Adapter
Put in Sandisk MicroMate SDHC to USB Adapter
Put in Front USB spot
copied gapps
>Boot into Recovery
Gapps installed
> boot
all good
did all set ups like before
added apps (7 games for kids)
rebooted twice
started using
added one app I really like (newshog)
Listening for drumming... nothing so far (Dr. Who reference)
I'm going to go the weekend before rebooting to stock as I can do some adding, and rebooting to android.
Maybe backup the droid side this time around.
THEN the death tests on Monday
-thanks for listening_
p.s. - Yes, I still suspect the card reader somewhat as REMOVING may be where it breaks down.
However, once or twice when I had the Unexpected lack of boot partition error - I was able to bring it back by doing a CM7 update via recovery, despite it refusing to find the boot partiton immediately previously - of course that means the SDcard was removed and reinserted. Most time reinsertion = no help.
You do not need to remove the SD to test booting to emmc. Just press and hold the n button during the boot until the boot menu comes up. Then select emmc/normal and boot. It will boot to stock. The only problem with doing that is now your SD boot partition is 'sdcard'. But should work for testing stock.
leapinlar said:
You do not need to remove the SD to test booting to emmc. Just press and hold the n button during the boot until the boot menu comes up. Then select emmc/normal and boot. It will boot to stock. The only problem with doing that is now your SD boot partition is 'sdcard'. But should work for testing stock.
Click to expand...
Click to collapse
Yes, I know - but it's two separate tests to see which one caused the problem.
Turns out that neither was needed - it was easier to create; my son simply turned it off (not a reboot cycle as I had been doing which worked).
When it was turned on, it no longer boots - it goes straight to BSOD (actually deep purple).
Booting into recovery gets me:
Penguin Logo
rcS!
Populating /dev using udev: done
Initializing random number generator.... done.
modprobe: chdir(2.6.32.9): No such file or directory
Starting Network...
Detected Standard B&N nook layout, emmc first
Error! Unexpected lack of boot partition on the SDCARD!
Please Report!
Poweroff when ready
Since I'm till held to the noob reposting limit of once every 5 minutes and the captha I can barely read - I'll post MiniTool result in about 5 minutes. I'll link a screen capture if i can here.
I tried to boot per menu to the EMMC stock; Clockworkmod Recovery v3.2.0.1 came up. I know I did emmc and what ever the second default is (which should be normal) - I'm pretty sure it was normal.
I offed it and did the same and confirmed it was the default; THIS time it came up Nook stock.
Is there some way I installed something to the stock NOOK and didn't remove it when I restored to factory? The other day I did the restore from that same clockworkmod screen NOT from the stock Nook environment.
I'm wondering if I somehow created my own monster way back when I first started this and was playing in the android environment.
I just edited what I wrote a few seconds ago. The reason it went to emmc recovery is because the recovery flag was not reset when that SD Recovery told you that error. Did you read my tips about recovery bootloops? When you exited 3.2.0.1, it cleared the flag and booted normally.
I still suspect hardware issues.
Just for Ha, Ha's I hooked the Nook via USB to the PC.
G Drive "Removable Disk G" (wants a disk to be inserted)
E Drive "MyNookColor" ( Lots of what I assume to be standard Nook folders.
See my edit above.
Attachement # 1 SD Card from Mycomputer:
Attachment # 2 MiniTool View of SD Card
Boot Partition
Properties using Minitool Partition Wizard (attached):
Used
Partition Info
File System Info
Surface Test of Boot Partition:
Perfect - so no picture.
This is SO aggravating - I almost would accept just knowing why rebooting wrecks something if I knew WHAT).
leapinlar said:
I just edited what I wrote a few seconds ago. The reason it went to emmc recovery is because the recovery flag was not reset when that SD Recovery told you that error. Did you read my tips about recovery bootloops? When you exited 3.2.0.1, it cleared the flag and booted normally.
I still suspect hardware issues.
Click to expand...
Click to collapse
Sorry, apparently not closely enough - got lots of time again.
....didn't expect that anyone would be watching, was busy posting pictures so I could go away and read and think...
Probably is hardware - wish I had some way to vigorously test that, I get that basic use in Nook Stock doesn't really prove everything is good.
Plus I bought refurbished and I have to go dig up the warranty, it was months ago, so not too hopeful and boxes long gone. Don't know how nice B&N is, free replacement charger and cord is one thing - whole another refurb unit is different if I can't show stock SD card reading is an issue, not sure how much they check, but I don't think they care about CM7 off a SDcard not working!
Everything looks perfect on that card. All the right files, partition sizes, etc. You have stock on emmc, CWM 3.2.0.1 on emmc recovery.
I still suspect hardware issues. Powering off makes card semi-unreadable. Can still boot to it but when checking for partition information on SD fails.
If you registered your nook, the serial number is all you need. Refurbished usually have a one year warranty. Mine did. Just tell them card reading is intermittent. Which it is. They are pretty generous. You still have stock on there.
Edit: Try just an ordinary SD and power off, reboot, and repeat many times and in between check card reading ability.
leapinlar said:
Everything looks perfect on that card. All the right files, partition sizes, etc. You have stock on emmc, CWM 3.2.0.1 on emmc recovery.
I still suspect hardware issues. Powering off makes card semi-unreadable. Can still boot to it but when checking for partition information on SD fails.
Click to expand...
Click to collapse
Yup, it's really the only thing that hasn't been able to be changed through all of this.
I've mostly gotten these results - I've managed to make it worse as I redid things and apparently got sloppy. But when going back to methodically following instructions I have what I had months ago. I had hoped buying other cards would make it at least act differently.
Thanks for all of the reviews and double checking, at least I now it's not something obvious (but wasn't obvious to me) that I missed along the way!
I'll have to call B&N and see how strict they are and if they take the "It just has trouble reading any SD card consecutively".
Now where was that review of the Nexxus 7.... and I wonder how all the tablet prices are going to drop especially for the Galaxy Tab. Buying is not as fun but I am completely beat with modding failures.
We are too fast with each other. Lol. See my edit above.