Greetings.
Sorry for my english, i'm from Chile.
Well, about 3 weeks ago I tried to flash Omega Rom V13.2, and I needed to flash the modem XXUEMJ5 in order to do so.
I completed the process usin Odin and PhliZ Touch. Then I flashed the rom and booted the S4.
But when i tried to call, the phone rebooted. Also, it doesn't played any music and worked very slow.
Later, I flashed Echoe Rom and it didn't worked too.
Then i tried to flash another Modem. I flashed another modems but it didnt solve the problems
Currently, this is what i see after dialing *#1234#:
AP: I9505XXUEMJ8
CP: I9505XXUEMJ5
CSC: I9505EVREMJ2
But the phone doesn't work. ¿Is there any way to fix it?
go back to stock rom 4.3 it will fix everything:laugh:
?
How are you flashing the modem?
devilsdouble said:
How are you flashing the modem?
Click to expand...
Click to collapse
download the modem you need and then extract with 7zip the modem.rar file-then you have modem.tar file,
turn off phone complete-- go into download mode with push at the same time home,power and vol down buttons, continue with vol up..
put the modem.tar file into phone in odin 3.07, but do not select auto reboot.. you have to reboot by yourself with power button and the modem is normally changed...
if not repeat one time more
good luck
Related
I found the odin or mobile odin is unable to flash the baseband ZHUDMI1, XXUEMI8 and XXUEMJ3.
When I use odin to flash, the whole process is success but the baseband version in the handphone doesnot change when viewing.
If I use mobile odin, the process will stuck at the blue robot and the last line shows" Modem #2 Clearing..."
Unless I use odin to flash the whole rom of XXUEMI8(4.3) and the the baseband will be undated to XXUEMI8. I would like to know what is the problem.
Which files are you using to flash the baseband?
adam1000rr said:
Which files are you using to flash the baseband?
Click to expand...
Click to collapse
All the files I downloaded are from here:
http://forum.xda-developers.com/showthread.php?t=2192025
and the Odin I used is odin3 1.85, odin3 3.09 and mobile odin 3.76. None of these works.
But luckily, it seems that my baseband is not flashed and remain as old version and working.
In the post it recommends you use Odin 3.04 and untick "Autoreboot", you should try following these instructions to the letter and see if it works!
Ok it worked.
If anyone else is having issues with the baseband not changing, do this.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
adam1000rr said:
In the post it recommends you use Odin 3.04 and untick "Autoreboot", you should try following these instructions to the letter and see if it works!
Click to expand...
Click to collapse
It really works, now my baseband is the newest XXUEMJ3, thank you.
I tried to flash the Baltic ROM with odin 3.07. I didn't find a way to change CSC (so KIES can recognize it) and i tried to go back to 4.3 EUR. But:
Odin failed (Checking MD5 finished Sucessfully..... Leave CS..... FAIL!) and now when i open the phone there is the following message :Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. KIES 3 says the connected device is not supported. I tried flashing the stock rom with ODIN (even tried 3.09) again but it failed. what can i do to recover my phone?
Thanks for any answers
tetra82 said:
I tried to flash the Baltic ROM with odin 3.07. I didn't find a way to change CSC (so KIES can recognize it) and i tried to go back to 4.3 EUR. But:
Odin failed (Checking MD5 finished Sucessfully..... Leave CS..... FAIL!) and now when i open the phone there is the following message :Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. KIES 3 says the connected device is not supported. I tried flashing the stock rom with ODIN (even tried 3.09) again but it failed. what can i do to recover my phone?
Thanks for any answers
Click to expand...
Click to collapse
Force Download Mode and flash one Custom Recovery. I think the Note 3 reboot from Recovery and Rom work. Try this...
But the Baltic Rom is KitKat 4.4.2?
tetra82 said:
I tried to flash the Baltic ROM with odin 3.07. I didn't find a way to change CSC (so KIES can recognize it) and i tried to go back to 4.3 EUR. But:
Odin failed (Checking MD5 finished Sucessfully..... Leave CS..... FAIL!) and now when i open the phone there is the following message :Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. KIES 3 says the connected device is not supported. I tried flashing the stock rom with ODIN (even tried 3.09) again but it failed. what can i do to recover my phone?
Thanks for any answers
Click to expand...
Click to collapse
if you flashed kitkat you cant go back to 4.3
thx for the quick replies guys. Since there is no way to go back to 4.3 is there a way to change the CSC so KIES can recognize the device? already tried CSC Select and the dialer code but no luck
tetra82 said:
thx for the quick replies guys. Since there is no way to go back to 4.3 is there a way to change the CSC so KIES can recognize the device? already tried CSC Select and the dialer code but no luck
Click to expand...
Click to collapse
The better for me is a new CLEAN install. On Customer Recovery wipe data+cache+dalvik and format system on mount and storage.
Whit recovery on screen force Download Mode and reflash the Rom. When You enter Your language at first boot, Your CSC is installed well (if the Rom have it on multi-csc).
I flashed the Poland Rom whit XEO, after first reboot I had my TPH well, automatically. What is Your CSC?
ValenteL said:
The better for me is a new CLEAN install. On Customer Recovery wipe data+cache+dalvik and format system on mount and storage.
Whit recovery on screen force Download Mode and reflash the Rom. When You enter Your language at first boot, Your CSC is installed well (if the Rom have it on multi-csc).
I flashed the Poland Rom whit XEO, after first reboot I had my TPH well, automatically. What is Your CSC?
Click to expand...
Click to collapse
OK sorry for late reply but i had a problem with my connection. I tried a different rom this time (polish) and at the same time i did what you said (full wipe etc. Worked like a charm. Device is faster thn ever and kies recognizes it again. Thanks a lot to everyone
OLD Baseband Version after 4.4.2 update i9505 ??
I was using Android 4.3 with baseband i9505XXUEMK9
Just updated it to 4.4.2 via link below (Pre-rooted)
http://forum.xda-developers.com/show...light=baseband
Flashed it via ODIN
but my Baseband is still same i9505XXUEMK9
Earlier had issues with Wifi.. it was completely gone.. changed the kernel to Jebbokernel & NOw its back
Flashed latest Modem package "I9505XXUFNBE_GSM_LTE_Modem" via ODIN from here
https://content.wuala.com/contents/B...y=cf3Czgmdt3WS
But still my baseband is same i.e i9505XXUEMK9
What should I DO??
Thanks
Download and unrar the MODEM/BASEBAND
Use Odin
Untick Autoreboot
Flash modem (the file u downloaded in step one (.tar))
Put off ur battery and put in again
Reboot into Download Mode (Vol Down + Home button combi)
Flash Modem once more
Put off ur battery and put in again
Once done, unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Awesome Man <3<3
It worked
Thanks A LOT
Bless ya @Joku1981
Hi all,
I installed the leaked rom for the N9005 on my phone a couple of weeks back.
AP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OXA_N9005OXAGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar.md5
It seems that whatever official firmware I install, I cannot seem to be able to replace the N9005XXUGBNL8 Baseband.
Leaving me with a unstable phone no matter which firmware I use.
I've tried almost all Odin and (custom) recovery flashing cache & hard resets/ full wipes before and after variations, I could find on this forum.
Yes, Knox is flagged 0x1
I hope someone can help me.
Power off your phone, wait a few seconds, with the 3 button combo boot your phone into download mode.
Put the modem file into the CP slot in odin.
https://www.androidfilehost.com/?w=files&flid=18034
When you are done, go to this thread and thank the developer for providing the modems.
http://forum.xda-developers.com/showthread.php?t=2649176
I just went through this issue with the official lollipop build.
The solution was to power down, take the battery out, wait 10 second, battery back in, but into download mode, flash with odin 3.09 and voila it worked perfectly for me
SOLVED!
IT WORKED!
Thank you both so much!
OTA and Kies show my software is up to date, which isn't true because the phone that was replaced had lollipop...thru an OTA.
Is there a way to force the lollipop update?
Download Samsmoblie
TheNamelessMan said:
OTA and Kies show my software is up to date, which isn't true because the phone that was replaced had lollipop...thru an OTA.
Is there a way to force the lollipop update?
Click to expand...
Click to collapse
Sam's mobile has all Samsung Firmware, Download it and get Odin and put in download mode flash the firmware
I would love to have my phone back to KK, i can't be arsed to downgrade , but believe me lolipop is the worst thing that happen to the note 4, (even the keyboard lag when you type texts) Im using a debloted rom and is still bad..
TheNamelessMan said:
OTA and Kies show my software is up to date, which isn't true because the phone that was replaced had lollipop...thru an OTA.
Is there a way to force the lollipop update?
Click to expand...
Click to collapse
Yeah you Can Download Manually Official Lollipop 5.0.1 For AT&T Baseband Version: N910AUCU1COC4
After Downloading Extract it, You Can get 4 Files ,
BL-N910A To Be Flashed in BL SLOT in Odin
AP-N910A To Be Flashed in AP SLOT in Odin
CP-N910A To Be Flashed in CP SLOT in Odin
CSC_ATT_N910A To Be Flashed in CSC SLOT
You Can Flash All Files at the Same Time by Loading in Odin...
Just Flash AP,Bootloader & CP files...No need for CSC to Flash...
Remeber To Backup Your Data Before Flashing..
[*]Go in Recovery MOD & Do Factory Reset
[*]GoTo Download Mode by First Powered Off Your Note 4 than by Pressing Power+Volume Down+Home Button All Together...
[*]Just Check Auto Reboot & F.Reset Time in Odin Leave All other as it's
Here is Odin v3.10.6
I hope It'll solve the issue...
TechLife said:
Yeah you Can Download Manually Official Lollipop 5.0.1 For AT&T Baseband Version: N910AUCU1COC4
After Downloading Extract it, You Can get 4 Files ,
BL-N910A To Be Flashed in BL SLOT in Odin
AP-N910A To Be Flashed in AP SLOT in Odin
CP-N910A To Be Flashed in CP SLOT in Odin
CSC_ATT_N910A To Be Flashed in CSC SLOT
You Can Flash All Files at the Same Time by Loading in Odin...
Just Flash AP,Bootloader & CP files...No need for CSC to Flash...
Remeber To Backup Your Data Before Flashing..
[*]Go in Recovery MOD & Do Factory Reset
[*]GoTo Download Mode by First Powered Off Your Note 4 than by Pressing Power+Volume Down+Home Button All Together...
[*]Just Check Auto Reboot & F.Reset Time in Odin Leave All other as it's
Here is Odin v3.10.6
I hope It'll solve the issue...
Click to expand...
Click to collapse
my baseband version is N910AUCU1BNK3. Different from the one you listed above.
TheNamelessMan said:
my baseband version is N910AUCU1BNK3. Different from the one you listed above.
Click to expand...
Click to collapse
Yes Because You are on Android Kitkat...Baseband Version Shows The Android version...So Cannot Flash Android's Same Base Band on Earlier Same base-band...
If You Do So than You'll be Again on Android Kitkat...
When You Update To Lollipop Your Baseband Will be Change To that N910AUCU1COC4....I Mentioned Base band Just because You can Know What's New...
There is No need To Worry just Flash With Odin & Follow The Steps Carefully You'll Get Lollipop..than in Lollipop Your Baseband will be N910AUCU1COC4....After That You'll Be able To Update Via OTA... Its Latest N910AUCU2COC5 update is Around 160MB You'll Get that in OTA..
First You've To Flash That I Told you in Above Post...
Check Attachement I captured From AT&T Site