Hi,
I use my Samsung Ativ tab to read in the bed, so when I shut off the room light i set my pc to more darknest that I can...
Anyway is too brightness, are there a way, a tips an add on, to set more darknest as possible?
thanks
Daniele
Once the brightness slider is at 0, it won't go any darker short of turning the backlight off entirely which windows doesnt even support. I can guarantee you that no backlight at all will be too dark.
SixSixSevenSeven said:
Once the brightness slider is at 0, it won't go any darker short of turning the backlight off entirely which windows doesnt even support. I can guarantee you that no backlight at all will be too dark.
Click to expand...
Click to collapse
Thanks !!
bye
Daniele
Related
Hello
thanks for help
in my previous kaiser , after 30 second the screen backlight dim (don't shut down, set to minimal position) and after 1 mnute the kaiser completly go on stanby
this is all ok
But in my new P6500
after 30secondes the back light completly switch off !! but the p6500 still wake, and after 1 minutes it goes to standby
How can i set or make some regsitry tweak to make P6500 go to dim backlight after the preset time just like kaiser ??
Thanks
The Sedna screen is different from the one on your Kaiser , you can read whats on the screen even when the backlight is completely off.
sammis said:
The Sedna screen is different from the one on your Kaiser , you can read whats on the screen even when the backlight is completely off.
Click to expand...
Click to collapse
Well, assuming there is sufficient ambient light! In total or near-total darkness, I would be VERY surprised if it still could be read.
P996 said:
Well, assuming there is sufficient ambient light! In total or near-total darkness, I would be VERY surprised if it still could be read.
Click to expand...
Click to collapse
In near-total darkness you definitely can't read whats on the screen but you can read it when the backlight is off and you are holding the pda under direct sunlight .
Even on the dimmest settings, the Vibrant is too bright for me in bed, where the light disturbs my wife.
It seems that, with root, you can lower the brightness further - at least on other phones. Is there any way to do this with the Vibrant?
Thanks!
The "Dimmer" app will toggle it from your current brightness down to 10 but if you find something that will go lower let me know.
It has an automatic brightness control based on input from the sensor. You may need to disable this in the settings too, but I would think it would be automatically dimming itself already in a dark room.
Dallasalien said:
It has an automatic brightness control based on input from the sensor. You may need to disable this in the settings too, but I would think it would be automatically dimming itself already in a dark room.
Click to expand...
Click to collapse
Right, but that doesn't get dim enough in some situations and the minimum brightness you can select manually is 30. "Dimmer" will take it all the way to 10 but I would like to see something that would take it to 1 or 2.
I agree. It's too bright in low light situations.
If you find a solution please post it.
Try the Screen Filter App from the market. You can get UNBELIEVABLY low brightness. Which means much better battery.
+1 on screen filter. New version now dims taskbar too.
I have set my S4 up so that it runs at 100% display illumination when charging. No autobrightness.
What is bothering me know is that the screen dims to about 50% very quickly after I stop touching the display and jumps up to 100% while I touch it.
Toggling smart stay doesn't change anything. Smart stay on doesn't help even when I look at the display (though it should just prevent it from going off .. not from dimming if I understand correctly.
I would like to display to stay at 100% when charging .. or at least set dimming to "after 15 secs" or so.
What needs to be done?
daniello8 said:
I have set my S4 up so that it runs at 100% display illumination when charging. No autobrightness.
What is bothering me know is that the screen dims to about 50% very quickly after I stop touching the display and jumps up to 100% while I touch it.
Smart stay toggling smart stay doesn't change anything. Smart stay on doesn't help even when I look at the display (though it should just prevent it from going off .. not from dimming if I understand correctly.
I would like to display to stay at 100% when charging.
What needs to be done?
Click to expand...
Click to collapse
I was reading about that and i found something about the chipset SnapDragon has an inside feature to adjust the screen brightness independently of the software (firmware on this case). Maybe you are watching that effect..
tomboymad said:
I was reading about that and i found something about the chipset SnapDragon has an inside feature to adjust the screen brightness independently of the software (firmware on this case). Maybe you are watching that effect..
Click to expand...
Click to collapse
There is a small tool that fixes it: "Caffeine" .. obviously
Intelliscreen also does the trick .. and there is a timeout you can set (not sure if it messes up the timeout for regular use when not charging though).
daniello8 said:
There is a small tool that fixes it: "Caffeine" .. obviously
Intelliscreen also does the trick .. and there is a timeout you can set (not sure if it messes up the timeout for regular use when not charging though).
Click to expand...
Click to collapse
Is not the solution because caffeine prevents from time up screen brightness but it doesn't prevent from cpu feature. Even if the screen is always wake up and the autobrightness is off, the brightness will be changed because the chipset.
tomboymad said:
Is not the solution because caffeine prevents from time up screen brightness but it doesn't prevent from cpu feature. Even if the screen is always wake up and the autobrightness is off, the brightness will be changed because the chipset.
Click to expand...
Click to collapse
Well .. it works for me.
daniello8 said:
I have set my S4 up so that it runs at 100% display illumination when charging. No autobrightness.
What is bothering me know is that the screen dims to about 50% very quickly after I stop touching the display and jumps up to 100% while I touch it.
Toggling smart stay doesn't change anything. Smart stay on doesn't help even when I look at the display (though it should just prevent it from going off .. not from dimming if I understand correctly.
I would like to display to stay at 100% when charging .. or at least set dimming to "after 15 secs" or so.
What needs to be done?
Click to expand...
Click to collapse
Could this be related to heat? With the screen on and charging + what ever other task you have the S4 doing it may be the S600 is governing the screen to reduce heat... just a theory like.
I'm having the same problem too.
If i unlock the phone the screens dims to about minimum brightness.
I can touch the brightness bar to make it brighter and it stays that way for as long as i don't lock the phone
If i lock the phone and unlock it again the screen dims again?
Tried all different settings bur nothing helps...
Very annoying....
Yesterday i bought and installed lightflow to control my led indicator.
Just a minute ago i removed the app and voila! No more screen dimming!
Damn, really love that app but rather no led control than having my screen dimmed to the lowest possible brightness.
Hey every body whats up?
Look iv been crazy from this
i like to cancell the v in the automatic brightness setting to have full brightness but alwas the phone plays with my brightness like the v was on somtimes dark and sometimes bright whats wrong how do i cancell this ???
bubu23 said:
Hey every body whats up?
Look iv been crazy from this
i like to cancell the v in the automatic brightness setting to have full brightness but alwas the phone plays with my brightness like the v was on somtimes dark and sometimes bright whats wrong how do i cancell this ???
Click to expand...
Click to collapse
have you got adapt display on, if so turn it off
under my device,display,screen mode
No this option not marked.
plz if any one can help why my brightness act like it on automatic when its not
the brightness level always get dark and more bright automatic
Hi, I am using my OP 8 pro at 120hz Qhd with auto brightness off but I can still observe brightness change shortly after opening some apps.
Is anyone aware of a ADB command to put screen settings to definitive values?
Do you have eye comfort on or off?
Ambient on or off?
Also bare in mind that the auto brightness toggle is at the end of the brightness slider.
In regards to the apps, if it's in gamemode then it could be raising it for that then reverting. Check settings for game mode or turn it off altogether and test.
dladz said:
Do you have eye comfort on or off?
Ambient on or off?
Also bare in mind that the auto brightness toggle is at the end of the brightness slider.
In regards to the apps, if it's in gamemode then it could be raising it for that then reverting. Check settings for game mode or turn it off altogether and test.
Click to expand...
Click to collapse
I have all of this turned off. Except Game Driver that I just turned off.
Will see. Thanks.
EMJI79 said:
I have all of this turned off. Except Game Driver that I just turned off.
Will see. Thanks.
Click to expand...
Click to collapse
Welcome mate, good luck
dladz said:
Welcome mate, good luck
Click to expand...
Click to collapse
Well it doesn't work...
The screen still gets dim from moments to moments.