Even on the dimmest settings, the Vibrant is too bright for me in bed, where the light disturbs my wife.
It seems that, with root, you can lower the brightness further - at least on other phones. Is there any way to do this with the Vibrant?
Thanks!
The "Dimmer" app will toggle it from your current brightness down to 10 but if you find something that will go lower let me know.
It has an automatic brightness control based on input from the sensor. You may need to disable this in the settings too, but I would think it would be automatically dimming itself already in a dark room.
Dallasalien said:
It has an automatic brightness control based on input from the sensor. You may need to disable this in the settings too, but I would think it would be automatically dimming itself already in a dark room.
Click to expand...
Click to collapse
Right, but that doesn't get dim enough in some situations and the minimum brightness you can select manually is 30. "Dimmer" will take it all the way to 10 but I would like to see something that would take it to 1 or 2.
I agree. It's too bright in low light situations.
If you find a solution please post it.
Try the Screen Filter App from the market. You can get UNBELIEVABLY low brightness. Which means much better battery.
+1 on screen filter. New version now dims taskbar too.
Related
Htc Hd2 has only one flaw: outdoor display contrast. in the bright day contrast is not on the iphone display level.... if there is a possibility to increase display light and contrast?? i try lumos but result is same as before... I dont want to use antireflect foil or anything similar ....
I suppose that's very subjective. I use lumos with my own settings for the brightness curve (linear with a deep slope) and I can use it in daylight with no big issues.
In case you wanted to test, you probably could set the screen brightness to 100% manually from manila preferences to see if that suits your need, and then agjust lumos curve to your needs
I try again with lumos .... probably something I was not well set up ...
hey! -------> this time it's better and brighter!
But isn't the auto-backlight feature doing the same thing? Making Backlight bright when outdoors?
How is it compared to lumos?
Dadaism said:
But isn't the auto-backlight feature doing the same thing? Making Backlight bright when outdoors?
How is it compared to lumos?
Click to expand...
Click to collapse
Lumos gives you control over the backlight. You can set up minimum and maximum backlight as well as the backlight intensity curve (vs external light intensity).
The built in auto backlight feature is very weak. It is fine for indoor use but it does not seem to get any darker in the pitch black and does not get much brighter in direct sunlight.
I find myself manually adjusting it everytime...
Agree - the automatic backlight is not working sufficiently. You all need to log this with HTC customer support so they can add it to the next firmware release. Issues really need to be logged sooner rather than later as this phone is going to soon be too old to warrant HTC spending any more time fixing things.
I've been trying to report everything I can before windows 7 comes out and everyone forgets about the Leo.
Hm, well I recognized that the Auto-Backlight is sometimes "slow". But not always. If I walk from a bright room into a dark room the display gets darker. But sometimes it stays quite bright.
Perhaps I give lumos a try. At least to compare.
But when Lumos has so many options to set a brightnes curve, won't you find yourself setting up an adjusted brighnness curve everytime because there is no curve that fits to every situation?
Sometimes there is bright sunlight and shadowy corners, sometimes there is a thunder-storm and barely light.
The light gradient won't be a linear one .
Ok, I played around a little bit.
What are your Max values with HD2? 1178 at mine.
0 is Min value but thats clear. Only thing that is wierd: When I move to a place not directly near a lightbulb the sensor goes very fast down to zero.
It shows zero but it is not dark in the room at all.
Is it the same at yours?
Is it just me or does everyone's Epic's have terrible brightness sensor hardware/software? My sensor seems to have about 2-3 settings of brightness, and goes from completely dim to super bright in random situations and nothing in between.
Cyanogen just posted on his twitter that in the past he changed the sensor's abilities through coding modifications. Could we do something of the sort for the Epic's sensor?
Agreed. The sensor is horrible. Also, the transition between brightness settings when set to automatic is near instant instead of slowly transitioning, which makes it more obvious that its changing brightness.
I would agree that it is terrible. Mine also send to sometimes turn auto brightness back on if I've turned it off.
It would be great if someone found a way to mod the code for it!
Sent from my SPH-D700 using XDA App
I thought the screen was just too bright at its lowest setting. Fortunately someone came up with a fix for it that can be found in the developer section. As far as the automatic sensor I would suggest turning off "Power Saving Mode" in the Settings>Sound & Display as well. I've read somewhere that this causes the brightness level to vary on its own.
cfiblc said:
I thought the screen was just too bright at its lowest setting. Fortunately someone came up with a fix for it that can be found in the developer section.
Click to expand...
Click to collapse
Hehe, that was me. Stay tuned for more. I have coded up and will post, tonight, a new version that will let you modify the brightness curve (from the command line, for now)
As for automatic mode, I have figured out how to modify some aspects of it at the kernel level, such as the ambient light thresholds at which it switches to a different brightness level. By modifying the brightness curve, we can achieve at least some more control. But to make it really good may be significantly harder.
Personally, since manual brightness is always available by swiping horizontally on the status bar, I have little desire to use auto mode anyway.
- linuxuberant
The sensor is actually pretty sensitive. It's just that Samsung chose to have a really small range of brightness steps for automatic brightness.
Firon said:
The sensor is actually pretty sensitive. It's just that Samsung chose to have a really small range of brightness steps for automatic brightness.
Click to expand...
Click to collapse
More like they installed an awesome dimmer switch and lights, but the fixture only does three modes; high, medium, and still pretty damn bright.
I really like the auto brightness feature, but it's consistently too bright for my taste.
Is there a mod or tweak out there that will allow me to lower/adjust my automatic brightness levels to save some battery life?
(Currently running Blackhole 3.0 / DL09, will go to Blackhole 4.0 once it's out tomorrow)
anybody have any ideas
Unless you know how to modify the kernel source (which I believe is written in C, correct me if I'm wrong devs) or modify some file that is the delegate for the ambient light sensor, you're SOL buddy.
Its probably hardwired into the kernel, would be my guess.
Hmmm, I thought automatic meant automatic. My bad. J/K
Sent from my SCH-I500 using XDA App
Yes, automatically too bright in most situations. Yet not bright enough in sunlight.
I almost need to cover the light sensor some to fool it.
This is where Samsung fumbles. Their software is poor. Whomever is writing the code, set the light sensor to brightness conversion wrong. At least on DL30 they fixed one mess up. On the original rom, when you plugged in external power, the brightness would go to a fixxed level. If you were outside in a car and plug in power, it would dim the display. Indoors at night, plug in power, and it would BRIGHTEN the display. What's up with that.
worwig said:
Yes, automatically too bright in most situations. Yet not bright enough in sunlight.
I almost need to cover the light sensor some to fool it.
This is where Samsung fumbles. Their software is poor. Whomever is writing the code, set the light sensor to brightness conversion wrong. At least on DL30 they fixed one mess up. On the original rom, when you plugged in external power, the brightness would go to a fixxed level. If you were outside in a car and plug in power, it would dim the display. Indoors at night, plug in power, and it would BRIGHTEN the display. What's up with that.
Click to expand...
Click to collapse
Whats wrong with manually changing it? It doesnt even take 5 seconds to change the level.
Kaze105 said:
Whats wrong with manually changing it? It doesnt even take 5 seconds to change the level.
Click to expand...
Click to collapse
Exactly. Why would you expect your phone to automatically make your life easier or function at an optimum level?
Kaze105 said:
Whats wrong with manually changing it? It doesnt even take 5 seconds to change the level.
Click to expand...
Click to collapse
What's the purpose of having a light sensor if it never works?
Often when I pop my phone open to do a specific task, '5 seconds' is about as long as it would have taken to do that whole task. And it's just annoying to unlock the screen, begin to attempt doing something, and then notice 'oh hey, the screen is basically unseeable!' and have to interrupt whatever you're doing. Or, even worse, when you're going from place to place and go through areas that are lighter and darker, forcing you to keep interrupting your work.
worwig said:
Yes, automatically too bright in most situations. Yet not bright enough in sunlight.
Click to expand...
Click to collapse
KitsuneKnight said:
What's the purpose of having a light sensor if it never works?
Often when I pop my phone open to do a specific task, '5 seconds' is about as long as it would have taken to do that whole task.
Click to expand...
Click to collapse
You guys nailed it. The screen is far brighter than I need while indoors at the office, but step outside and it just doesn't keep up with the bright Colorado sun (I can adjust it manually to a level that can be seen in sunlight just fine).
I could spend 5 secs adjusting the backlight each time the light environment changes, but why not spend 30 min optimizing the auto brightness levels and then never have to worry about it...
I know with my Moto Droid, someone had made a code that altered a particular file to change the lowest brightness level, but I have yet to see that for the Fascinate. It's a shame since the Fascinate's screen is so much nicer, but not set up optimally.
I know some dev's had also integrated the ability to change the auto brightness levels within custom ROMs for the Moto Droid. That'd be a great feature on the Fascinate!
KitsuneKnight said:
What's the purpose of having a light sensor if it never works?
Often when I pop my phone open to do a specific task, '5 seconds' is about as long as it would have taken to do that whole task. And it's just annoying to unlock the screen, begin to attempt doing something, and then notice 'oh hey, the screen is basically unseeable!' and have to interrupt whatever you're doing. Or, even worse, when you're going from place to place and go through areas that are lighter and darker, forcing you to keep interrupting your work.
Click to expand...
Click to collapse
That is to peoples own preference. I use auto most of the time and its fine. Doesn't work would indicate it doesn't change the brightness at all.
You can't expect it to auto sense it to every persons liking. Also does power control change it so you can see the screen, cause that doesn't take '5 seconds'
Sent from my SCH-I500 using XDA App
spenceuiuc said:
I really like the auto brightness feature, but it's consistently too bright for my taste.
Is there a mod or tweak out there that will allow me to lower/adjust my automatic brightness levels to save some battery life?
Click to expand...
Click to collapse
Try Screen Filter - its in the app store. With screen filter applied I keep my phone set to auto and screen filter reduces that more - in my case 50% more.
Well in the DL30 rom you don't have to go to the settings menu to change the brightness, just press and hold on the notification bar and then slide left and right to change the brightness.
Zong00 said:
Try Screen Filter - its in the app store. With screen filter applied I keep my phone set to auto and screen filter reduces that more - in my case 50% more.
Click to expand...
Click to collapse
Ill check that out. Thanks!
Here's my dilemma... I like saving battery by setting my brightness level lower than the automatic setting (since the screen still looks great anyway), but I would like it if I didn't have to go into my settings manually to change the brightness level so that I can see the screen when in direct sunlight. Is there any way someone could develop a mod to have the automatic brightness, but about 20% dimmer? I don't know if it's possible, but it would be pretty awesome.
Sent from my HTC Glacier, powered by a flux capacitor.
geoffott said:
Here's my dilemma... I like saving battery by setting my brightness level lower than the automatic setting (since the screen still looks great anyway), but I would like it if I didn't have to go into my settings manually to change the brightness level so that I can see the screen when in direct sunlight. Is there any way someone could develop a mod to have the automatic brightness, but about 20% dimmer? I don't know if it's possible, but it would be pretty awesome.
Sent from my HTC Glacier, powered by a flux capacitor.
Click to expand...
Click to collapse
I have my screen set pretty dim, and use the Power widget to crank up the brightness if I go outside.
You can also you the "Screen Filter' app to make the screen x% darker than the current setting. (which even allows you to make it darker than the dimmest brightness settting, which is really nice on the batteries.)
- Frank
geoffott said:
Here's my dilemma... I like saving battery by setting my brightness level lower than the automatic setting (since the screen still looks great anyway), but I would like it if I didn't have to go into my settings manually to change the brightness level so that I can see the screen when in direct sunlight. Is there any way someone could develop a mod to have the automatic brightness, but about 20% dimmer? I don't know if it's possible, but it would be pretty awesome.
Sent from my HTC Glacier, powered by a flux capacitor.
Click to expand...
Click to collapse
I am current searching for the same thing.
temp solution is to Market > Dimmer (night mode) by geekyouup
It toggles auto brightness and sets back light to min. when on. click once, screen goes super dark, click it again, auto brightness take over. handy. (put it up to status bar w/ bar control and you can get to it when ever)
Problem with auto brightness right now is at it's lowest setting, the back light is still at about 25%. there is gotta be a way to change that in the settings.apk
or better yet, have an option to set your own ambient light to lcd brightness ratio for the auto brightness
option to set own ambient light ratio?
sleepyfu said:
there is gotta be a way to change that in the settings.apk
or better yet, have an option to set your own ambient light to lcd brightness ratio for the auto brightness
Click to expand...
Click to collapse
I'm search for this also. I believe you can adjust this in CM7 but is there is a way to do this that is not ROM specific? I'm currently using RoyalGlacier with Faux123 kernel and I find the auto brightness setting for dim ambient to be too bright and the bright ambient to be not bright enough.
When I'm in a light room the screen goes brighter but if I walk into a darker room, the screen doesn't dim unless I lock and then unlock the screen.
Anyone else having similar issues?
Yep got the same here. Thought I had a faulty ambient light sensor but obviously not.
Sent from my SM-G935F using Tapatalk
Just tried it by covering the light sensor to make sure, no problem here (G935F). My only concern related to brightness is that the s7 just has auto brightness, but no adaptive brightness.
Uncheck the auto box and recheck. Then don't touch the slider. It's usually because in marshmallow the slider moves with the auto bright and most people touch it which makes it hold position.
jackdforme said:
Uncheck the auto box and recheck. Then don't touch the slider. It's usually because in marshmallow the slider moves with the auto bright and most people touch it which makes it hold position.
Click to expand...
Click to collapse
There seems to be a bug somewhere still. I just tried to move the slider while auto brightness is ticked and to cover the light sensor afterwards again and it still worked and to my surprise it even took into account that I lowered the brightness and took also a lower brightness at the covered state and took my initial setting after uncovering, pretty nice, so there is indeed still adaptive brightness. After ticking und unticking auto it went back taking the default steps for brightness as before.
Having the same issue here
Definately not touched the slider.
Also, I have tested the light sensor and it appears to work fine so definately a software issue. Though I imagine we will see some software updates to fix bugs shortly after the official release date.
So you can adjust the slider with the box checked and get various levels of auto? Does it learn?
jackdforme said:
So you can adjust the slider with the box checked and get various levels of auto? Does it learn?
Click to expand...
Click to collapse
Yes.
I can't tell for sure, when I change further steps the previous seems to stick, at least to some extend so there is a logic behind it, but I can't tell for sure if it really is based on each step and sets it accordingly or if it's just changes the range it operates in. Anyways I'm a happy camper.
Also, I could reproduce the device not changing the brightness, when I put it to full at darkness it won't move anymore in auto. But as soon as I lower it again it will also change accordingly again, maybe at those with the stuck brightness the min brightness is only raised, but not lowered anymore, but just an assumption and doesn't help anyone atm unfortunately.
Use lux in play store
Sent from my SM-N920W8 using Tapatalk
https://play.google.com/store/apps/details?id=com.velis.auto.brightness
This is the first Galaxy phone I had, that Auto brightness actually works the way I like it.
It seems to be working fine now. It just takes a few seconds for the screen to dim (maybe I was being impatient).
After testing it further it's actually really good auto brightness.
It works, just takes some time to adjust to the lighting. Maybe the default settings are set to a certain time. Maybe with root we can adjust this..
AngioNicholai said:
It works, just takes some time to adjust to the lighting. Maybe the default settings are set to a certain time. Maybe with root we can adjust this..
Click to expand...
Click to collapse
It seems to only do it quickly when the device is lay down (as 954wrecker said). Maybe Samsung did that so it doesn't annoy you when using your phone.
this is definitely a bug imo... the auto brightness doesn't change for me either...
CuBz90 said:
When I'm in a light room the screen goes brighter but if I walk into a darker room, the screen doesn't dim unless I lock and then unlock the screen.
Anyone else having similar issues?
Click to expand...
Click to collapse
I also have an auto briteness issue, when I disable AutoBrite and set it manually about half my apps override the setting and enable AutoBriteness in the app's screen usually dimming the screen? SpadesFree one example and I do not see an override in the app.
Confimed that I'm having same issue, auto brightness not adjusting and slider not movingoing. Have to move it manually
Same issue. It needs to be fixed manually by editing services.jar (root needed)
Nothing else will work. None of google play apps will help with that issue. Does not matter what you do, it will always dimming if you don't fix it in framework.jar
Try it out: http://forum.xda-developers.com/s7-edge/development/auto-brightness-bug-try-fix-t3339858