Related
How do i rescue my bricked phone!
Click to expand...
Click to collapse
well the answer lies within this thread.
how do you brick a phone
well, there are many ways you can brick a phone.1. you install the wrong software
2.you install a 'broken' rom
3. you install a recovery that isnt supported for our phone
4.or you were messing with your bootloader
etc etc... you get the point
how to rescue a bricked x81st: If you have done a soft brick then you can boot into xrecovery and restore your latest backup. easy
2:if restoring doesn'twork or you have a hard brick then you should either launch:SEUS (sony ericsson update service) or pc companion. click update and follow the steps.
3:if none of that works then you will have to send it off to se. if you dont get some kind of phone company to fix it then its as useless as a real brick lol or a replica of a phone.
3:you can use a flashtool to fix it as well. if you open flashtool you usally get a number of options such as unlock bootloader etc. there should be an option where you can restore it. (lol i think)
Cheersi hope it helped. if it did then please do press the thanks button.
-wilbso
Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.
Chris95X8 said:
Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.
Click to expand...
Click to collapse
ok. besides the complete brick is what i call doomsday. thats just my own little thing lol. and yes i will metion 'bout' the flashtool too
how about hard brick??
X8
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7
montekristo said:
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7
Click to expand...
Click to collapse
Quite a few people repaired their phones with s1 tool. Iv never actually hard bricked my phone. IV done soft brick> bootloop but I fixed that be restoring a backed in xrecovery so these replies I
Getting are quite helpful. As long as your phone is repaired everything is alright.
sent from my x8 running gingerdx
Hello, can you please help me! I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?
benga_mircea said:
I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?
Click to expand...
Click to collapse
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.
B.Jay said:
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.
Click to expand...
Click to collapse
how did you get this thread back up?
Sent from my X8 using XDA App
wilbso said:
how did you get this thread back up?
Click to expand...
Click to collapse
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*
Thank you for your help, but I can't acces flash mode or fastboot mode again, lika I use to, after I connect the batery, push the back button, insert the usb, a few seconds and the "sony ericsson" screen pops up again and stays blocked. I think I've killed my phone
Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?
B.Jay said:
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*
Click to expand...
Click to collapse
Where did you find it? I mean where did boy find the thread? My Sig? Looking through old posts?
Sent from my X8 using XDA App
B.Jay said:
Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?
Click to expand...
Click to collapse
Thanks! I tried like 50 times, and nothing, the ennoing "sony ericsson" is booting (no sony ericsson logo as usualy, just the writing) I flashed 10 times in the past whith no problem. Now, even when I put it to charge ( wall charge) the phone is turning on showing that stupid "sony ericsson" writting, I cant shut it down from the on\off button. Before killling it, I've instales stock MT15i_4.0.A.2.368_GLOBAL ROM, then I upgraded to MT15i_4.0.2.A.0.42_Global, then rooted with DooMLoRD_v4_ROOT-zergRush-busybox-su, Installed CWM( wiped cache, updated SE tweaked v8.5 Rom) After the restart, the "se" writting started booting. I've pulled out the batery, and begined flashing it with flash tool(no green led).The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story! I've tried like 100 times with wotan, flash tool and FlashTool_0.2.9.1_FOTAUnbrick, no result, even if pc companion tells me "phone conected" and gives me further instructions whith the phone being dead, and the flash tool showing me to connect de device... Thank you for all the help, hope there is a solution. sorry for the long post and my bad english...
---------- Post added at 11:43 PM ---------- Previous post was at 11:24 PM ----------
04/040/2012 23:40:02 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:04 - INFO - Device disconnected
04/040/2012 23:40:06 - INFO - Device connected with USB debugging off
04/040/2012 23:40:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:07 - INFO - Device disconnected
04/040/2012 23:40:10 - INFO - Device connected with USB debugging off
04/040/2012 23:40:10 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:18 - INFO - Device disconnected
04/040/2012 23:40:35 - INFO - Device connected with USB debugging off
04/040/2012 23:40:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
Flash tooll results when trying to connect (pulling batery-10 secs, back butoon, usb cable)
benga_mircea said:
The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story!
Click to expand...
Click to collapse
Whoa... that's what I call a "security vulnerability".
If the flash process got interrupted because your lil bro pulled the USB cable I'm somewhat certain the NAND is messed up pretty good - no wonder you're stuck at the SE boot logo.
If there's no way by which you can get the device back to normal (read: even the guys over in the Neo sub-board are out of ideas/help) I think your best shot would be to send it in to SE for repair if you still got warranty. SE should have other means to resurrect the device and slap it back into shape.
I'm sorry I can't really help you here with this - the Neo is different from the X8 and also different from the way my tablets work.
Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!
benga_mircea said:
Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!
Click to expand...
Click to collapse
Well, on my Samsung, which has Fastboot, I first enter Fastboot and from there I put the device into download mode for flashing (in theory you can compare "Download mode" to the "Flash mode" - in Flash mode the W/X8 awaits a ROM image to be flashed into the NAND, pretty much the same as "Download mode" works).
Since your Neo isn't completely dead (you just have a shot system due to the flash interruption) you only need to find a way how you can re-write the system.
I lack the time to research how the Neo works, but I think there should be a way to get the device going as you can even "resurrect" a W/X8 where you formatted the system partition (by mistake in CWM, for example). However, that's not as bad as interrupting the USB connection but about the same "ooops" to blank the system.
Flash mode not working, fastboot not workingI Tried a lot of programs (wotan, flash tool, fota unbrick tool, octopus, omnius for se, pc companion, se update. Non of them manages to connect to my phone. If only I could connect for 1 sec. I have a backup of TA, but I can flash it. Thanks anyway!
is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me
NarutoDroid said:
is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me
Click to expand...
Click to collapse
yes 11W30 or below should unlock fine but for me 11W33 also no problem
Sent from my E15i using xda premium
I got my N7 Last week. My sister Locked it by too many pattern attempts. Now it asking to enter my gmail username and password.. I entered it bt not worked. I googled and find for solutions. I dint get a working solution.
Then i tried to Hard Reset the device. I followed all instructions given by google. But it freezes while Going through Recovery mode. I waited about Hours for a response. after that I tried Hard Reset by connecting USB Cable to PC. It Freezes at the menu itself.
Then I Installed SDK (4.1), ADB, FASTBOOT and Drivers from Nexus 7 toolkit by XDA.. still not working..
please Help Me to Solve this.
My device is UNROOTED.
Wi-Fi is OFF!
USB DEBUGGING is OFF!
I cant acces non of above because its locked.. please please help!
Finally got it!
When I Installed the drivers and Rebooted my device the Hard reset Worked Finely.
Ensure that..
1. USB Cable plugged in or not.
2. Necessary drivers installed or not.
That is funny because that's exactly what happened when I had my og droid. Except I was the one who locked myself out of my phone. Good job on getting this resolved.
Sent from my DROID3 using xda app-developers app
how to install SDK
sajjadpazhayillath said:
I got my N7 Last week. My sister Locked it by too many pattern attempts. Now it asking to enter my gmail username and password.. I entered it bt not worked. I googled and find for solutions. I dint get a working solution.
Then i tried to Hard Reset the device. I followed all instructions given by google. But it freezes while Going through Recovery mode. I waited about Hours for a response. after that I tried Hard Reset by connecting USB Cable to PC. It Freezes at the menu itself.
Then I Installed SDK (4.1), ADB, FASTBOOT and Drivers from Nexus 7 toolkit by XDA.. still not working..
please Help Me to Solve this.
My device is UNROOTED.
Wi-Fi is OFF!
USB DEBUGGING is OFF!
I cant acces non of above because its locked.. please please help!
Click to expand...
Click to collapse
This is my first post on this forum. Since the N7 is locked (I have one in the same condition), how did you install anything on it?
TIA
now_john
now_john said:
This is my first post on this forum. Since the N7 is locked (I have one in the same condition), how did you install anything on it?
TIA
now_john
Click to expand...
Click to collapse
Adb etc are PC installs not on the N7
Sent from my Nexus 7 using xda app-developers app
Google Nexus 7 Tab unlock
Hi ,
Tried so But failed to unlock my tab..its so painfull and very sad to state that google has no support..Can you help me out with step by step process to unloack my nexus 7 tab from " too many patterns tried "
thx
Sounds like Google should have put some more thought in the feature. Give the users a way to lock themselves out - and they will.
At least the "too many attempts" screen should tell the user to log in with the Google ID and password the device was registered with.
Can't help but think... Stolen.
Geesh, isit so hard Tod remember Gmail info so you can back in?
Sent from my Nexus 7 using xda app-developers app
mustbepbs said:
Can't help but think... Stolen.
Click to expand...
Click to collapse
Can't help but think - Dang - little sister got my Nexus again...
I just got my Nexus 4 and installed SDK and drivers on PC. OK, so now I boots my phone into fastboot mode, I connected it to my PC, entered"fastboot devices" in command line, no problem, I can see the device with the ID.
But when I entered"fastboot oem unlock", the command line it says" FAILED <command write failed <Unknown error>>". And the phone stays in fastboot mode without any pop-up.
I use USB 2.0 ports on the backside of the computer. Also USB 2.0 on my laptop. None of them work.
I tried to factory set the phone, restart computer and phone, change to another computer, none of them worked. Maybe I should contact Google to ask for an exchange because mine can not be unlocked?
Any help is deeply appreciated.
Utahnewbie said:
I just got my Nexus 4 and installed SDK and drivers on PC. OK, so now I boots my phone into fastboot mode, I connected it to my PC, entered"fastboot devices" in command line, no problem, I can see the device with the ID.
But when I entered"fastboot oem unlock", the command line it says" FAILED <command write failed <Unknown error>>". And the phone stays in fastboot mode without any pop-up.
I use USB 2.0 ports on the backside of the computer. Also USB 2.0 on my laptop. None of them work.
I tried to factory set the phone, restart computer and phone, change to another computer, none of them worked. Maybe I should contact Google to ask for an exchange because mine can not be unlocked?
Any help is deeply appreciated.
Click to expand...
Click to collapse
Yeah, GOOGLE will be happy to replace your phone because you cannot unlock your bootloader!? Are u serious? Make sure USB debugging is enabled under developer options...
There is a app in the play store that unlocks bootloader for nexus 4.
Sent from my Nexus 4
myturbo1 said:
There is a app in the play store that unlocks bootloader for nexus 4.
Sent from my Nexus 4
Click to expand...
Click to collapse
It requires root access. Without being able to unlock bootloader, I can't root my N4
BigDig said:
Yeah, GOOGLE will be happy to replace your phone because you cannot unlock your bootloader!? Are u serious? Make sure USB debugging is enabled under developer options...
Click to expand...
Click to collapse
They probably would, actually. The ability to easily unlock the bootloader is a feature of Nexus devices.
BigDig said:
Make sure USB debugging is enabled under developer options...
Click to expand...
Click to collapse
Only applies to ADB, not fastboot
Have you got the latest SDK files? Have you got the latest bootloader?
Utahnewbie said:
I just got my Nexus 4 and installed SDK and drivers on PC. OK, so now I boots my phone into fastboot mode, I connected it to my PC, entered"fastboot devices" in command line, no problem, I can see the device with the ID.
But when I entered"fastboot oem unlock", the command line it says" FAILED <command write failed <Unknown error>>". And the phone stays in fastboot mode without any pop-up.
I use USB 2.0 ports on the backside of the computer. Also USB 2.0 on my laptop. None of them work.
I tried to factory set the phone, restart computer and phone, change to another computer, none of them worked. Maybe I should contact Google to ask for an exchange because mine can not be unlocked?
Any help is deeply appreciated.
Click to expand...
Click to collapse
Try nexus 4 toolkit
Try a different USB cable if you haven't already.
Sent from my Nexus 4 using xda premium
Hy There i finally got my nexus 4 two days ago, i tried to search Google about bootloader limitation if there is any? Im pretty freaked cause i previously used xperia S with bootloader impossible to unlock, due to a carrier lock.
So is there a metod to check if bootloader of my N4 is possible to unlock like in hidden menu *#*#4636#*#* wich i cheked but i dont know to what i should pay attention? or is there the other way to chek .
I know that unlocking and rooting should be possible in N4 but i hope u understand my concern cause i bought N4 trough carrier contract and a negative expirience with xperia s, thanx
grgana said:
Hy There i finally got my nexus 4 two days ago, i tried to search Google about bootloader limitation if there is any? Im pretty freaked cause i previously used xperia S with bootloader impossible to unlock, due to a carrier lock.
So is there a metod to check if bootloader of my N4 is possible to unlock like in hidden menu *#*#4636#*#* wich i cheked but i dont know to what i should pay attention? or is there the other way to chek .
I know that unlocking and rooting should be possible in N4 but i hope u understand my concern cause i bought N4 trough carrier contract and a negative expirience with xperia s, thanx
Click to expand...
Click to collapse
No, a Nexus device will ALWAYS have an unlockable bootloader.
I don't know if anyone has said this yet, but are you sure you're in fastboot mode when you type: fastboot oem unlock?
that command only works from the bootloader, not from inside recovery or when your system is booted up.
---------- Post added at 03:53 PM ---------- Previous post was at 03:51 PM ----------
Utahnewbie said:
It requires root access. Without being able to unlock bootloader, I can't root my N4
Click to expand...
Click to collapse
That's not entirely true with something like the motochopper method.
kbeezie said:
That's not entirely true with something like the motochopper method.
Click to expand...
Click to collapse
Does motochopper work on the nexus 4 bro? Cause id love to simply root without unlocking bootloader and such (im a noob) cause i used motochopper on my locked bootloader xperia tablet and so i understand it.
jimbohurt said:
Does motochopper work on the nexus 4 bro? Cause id love to simply root without unlocking bootloader and such (im a noob) cause i used motochopper on my locked bootloader xperia tablet and so i understand it.
Click to expand...
Click to collapse
Some google searches seem to suggest so, such as : http://forums.androidcentral.com/ne...hopper-root-without-unlocking-bootloader.html
And even this one in response to my own assumption that you can't without unlock (though he didn't exactly provide links, and not sure if was specific to the Nexus S and Nexus 7)
http://forum.xda-developers.com/showpost.php?p=42580735&postcount=10
As for me... I just unlocked it, easier.
kbeezie said:
Some google searches seem to suggest so, such as : http://forums.androidcentral.com/ne...hopper-root-without-unlocking-bootloader.html
And even this one in response to my own assumption that you can't without unlock (though he didn't exactly provide links, and not sure if was specific to the Nexus S and Nexus 7)
http://forum.xda-developers.com/showpost.php?p=42580735&postcount=10
As for me... I just unlocked it, easier.
Click to expand...
Click to collapse
Thanks for the response dude, when you unlocked did you use adb and stuff through android adk or did you use a toolkit?
jimbohurt said:
Thanks for the response dude, when you unlocked did you use adb and stuff through android adk or did you use a toolkit?
Click to expand...
Click to collapse
I just rebooted into the bootloader mode, hooked it up to my computer. Typed
fastboot oem unlock
There was a warning just after, accepted it.
then I downloaded the latest TWRP (2.5.0.0) for mako (Nexus 4)
fastboot flash recovery name-of-recovery.img
booted into recovery, made a backup of my Stock rom, wiped /system /data /cache, used the following while in recovery
adb push name-of-my-rom.zip /sdcard
adb push name-of-google-apps.zip /sdcard
then installed both via recovery and rebooted into the fresh new custom rom.
If I had not installed a custom rom, and I were to leave TWRP into a non-rooted stock:
TWRP would instead warn me that it doesn't appear to be rooted, and if I would like it to place SuperSu on it, it would do so, and I would reboot into the stock system, launch SuperSu where it will ask me if I would like it to reboot into recovery and install the su binary. Which it does automatically, so stock-wise that was the cleanest way for me to get rooted on stock (with an unlocked bootloader)
---------- Post added at 09:03 PM ---------- Previous post was at 08:57 PM ----------
By the way just as a recap.
fastboot works in the bootloader mode.
adb works in recovery and in normal system (with usb debugging enabled).
Hi team,
I forgot my screen lock pin password, how to unlock my phone ?
If only option is factory reset then how I can retrieve my data? Pls guide me.
Model : nexus 4 16gb
OS: android 4.3
Root : unroot
mahadevansa said:
Hi team,
I forgot my screen lock pin password, how to unlock my phone ?
If only option is factory reset then how I can retrieve my data? Pls guide me.
Model : nexus 4 16gb
OS: android 4.3
Root : unroot
Click to expand...
Click to collapse
After you failed numerous times, doesn't the phone give you the option to log in your google account and reset the passcode?
If you haven;t log into your google account in the phone (you go to play.google.com, and use the Android device manager to change your passcode, or enter the code wrong many times and it will let you have an option to reset by your gmail).
Or if you don't have adb debugging enable or someway to access it, there is no way except factory reseting.
How in earth you forget your code and can't log into the google account?
You aren't using someone elses phone are u?
Sent from my Nexus 4 using XDA Premium 4 mobile app
eksasol said:
If you haven;t log into your google account in the phone (you go to play.google.com, and use the Android device manager to change your passcode, or enter the code wrong many times and it will let you have an option to reset by your gmail).
Or if you don't have adb debugging enable or someway to access it, there is no way except factory reseting.
Click to expand...
Click to collapse
nearly i tried more than 500 time, im not received any option to reset the pin and also one more thing i dont remember adb debugging mode is enabled or not. also while connecting my device to the computer its not recognizing the device, got error message device is not recognized like that.
is there anyway to recover my photos from the device after the factory restore. will i get all my photos
mahadevansa said:
nearly i tried more than 500 time, im not received any option to reset the pin and also one more thing i dont remember adb debugging mode is enabled or not. also while connecting my device to the computer its not recognizing the device, got error message device is not recognized like that.
is there anyway to recover my photos from the device after the factory restore. will i get all my photos
Click to expand...
Click to collapse
If usb debugging is disabled, then no, there's no way.
abaaaabbbb63 said:
If usb debugging is disabled, then no, there's no way.
Click to expand...
Click to collapse
how to check whether the usb debugging mode is enabled or not.
mahadevansa said:
how to check whether the usb debugging mode is enabled or not.
Click to expand...
Click to collapse
Install adb, connect your phone to your PC, then use the command "adb devices". If a device code is listed, then it's enabled.
so I have my girlfriends old phone and she thinks that I remember her password but I don't. she lost her newest phone but this one has a lot of pictures that's why she won't factory reset it. any tips? she made the switch to apple and she forgot her password for pretty much everything related to this phone. its an lg nexus 4. help us
i erased all data so i want to login but some wifi problem i cant enter into setting so i want to allow OEM UNLOCK option in bootloader/Recovery mode using CMD .
chethangowda.r said:
i erased all data so i want to login but some wifi problem i cant enter into setting so i want to allow OEM UNLOCK option in bootloader/Recovery mode using CMD .
Click to expand...
Click to collapse
If you are talking about setup wizard, you can skip that... When it ask for add account, there will be skip button... Check it...
there is no skip way
__Madddy said:
If you are talking about setup wizard, you can skip that... When it ask for add account, there will be skip button... Check it...
Click to expand...
Click to collapse
No there is no skip option (skip option dim )
chethangowda.r said:
No there is no skip option (skip option dim )
Click to expand...
Click to collapse
I'm stuck too! I can't go throught the setup phase because of nougat npj25.75-2, how do I unlock the bootloader of a bricked phone?
chethangowda.r said:
No there is no skip option (skip option dim )
Click to expand...
Click to collapse
I have done it many times, on stock 6.0 as well as custom 7.1 ROMs...
I don't remember steps of setup wizard but you can try it,
Remove SIM cards and turn on phone,
- add WiFi networks : don't add, skip it
- No sim inserted : skip
- Copy Data / set as new : go for set as new
May be now it will not ask for Google account....
---------- Post added at 06:16 AM ---------- Previous post was at 06:13 AM ----------
calvinsoares22 said:
I'm stuck too! I can't go throught the setup phase because of nougat npj25.75-2, how do I unlock the bootloader of a bricked phone?
Click to expand...
Click to collapse
For Bricked Phones, you can try to get unlock data without enabling OEM Unlock from developer settings, if it works..
Otherwise you will have to flash stock images to unbrick phone...