My rooted S4 can update to 4.3 OTA? - Sprint Samsung Galaxy S 4 Q&A, Help & Troubleshoot

So I have my S4 roooted using the CF Auto Root and flashing stock MF9. I installed the TWRP through Goo MAnager
This morning my phone request me to install the 4.3 update OTA...
I thought that rooted phone lost the OTA update capabilities?
If I wanted to update to 4.3.... Should I flash to 4.3 using Odin or should I go with the OTA?
What about the Knox boot thing?

kreizyidiot said:
So I have my S4 roooted using the CF Auto Root and flashing stock MF9. I installed the TWRP through Goo MAnager
This morning my phone request me to install the 4.3 update OTA...
I thought that rooted phone lost the OTA update capabilities?
If I wanted to update to 4.3.... Should I flash to 4.3 using Odin or should I go with the OTA?
What about the Knox boot thing?
Click to expand...
Click to collapse
If you didn't install a custom kernel you probably will be able to take the OTA.
You will lose root, and your custom recovery.
You will be stuck with knox bootloader.
You should spend a whole lot of time reading throught the stickies, how-to's and follow-up posts.

leaderbuilder said:
If you didn't install a custom kernel you probably will be able to take the OTA.
You will lose root, and your custom recovery.
You will be stuck with knox bootloader.
You should spend a whole lot of time reading throught the stickies, how-to's and follow-up posts.
Click to expand...
Click to collapse
So can I forgo the ota update and flash through Odin?

kreizyidiot said:
So can I forgo the ota update and flash through Odin?
Click to expand...
Click to collapse
Yes you can.
HOWEVER I would suggest you read a whole lot more on how to do that and the implications of doing so.
To get the MJA firmware (modem & files) WITHOUT tripping Knox (locked bootloader) check out Unknownforce's post(s)
IF you just want 4.3 you can go ahead and flash cnexus', Unknownforce's, negamann303, or Sac's ROM(s) but make sure you follow their OPs on how to do that specifically using Philz recovery and rebooting recovery before actual ROM flash.
I sense that you just want to 'jump in' to 4.3 right away. There are many things to understand before doing that. If you wish to not be 'surprised' by an issue that is/has already described and remedied then read a bunch first.
Good luck.
oh, and if I or any member has helped you there is a 'Thanks Button' there too.

Related

Process to Flash MDL via Odin [Help]

I'm still deciding whether or not I should flash back to MDL and OTA the 4.3 update when it comes out. What is the exact process in flashing via Odin?
I already know this far;
Download Odin and MDL .tar
Go through the process and let it flash
Wait for the green
Flashed - Boot like normal
OTA to 4.3
I have been hearing about something called Triangle Away. What am I supposed to do exactly with it? What I know so far is, if you want to send your device in for repair or warranty, you should do Triangle Away?
Thanks!
http://forum.xda-developers.com/showthread.php?t=2314494
http://forum.xda-developers.com/showthread.php?t=2261573
The first link is somewhat useless for what I'm asking. Unless I'm completely oblivious of something.
I already checked Adam's thread, but what is the whole thing about Triangle Away and the flash counter?
Exactly how am I supposed to use it?
Do I flash to MDL, root and then use Triangle Away and then flash via Odin back to MDL or what?
EDIT:
I just installed Triangle Away and my Flash Counter is at 0. So nevermind, I guess I don't have to do anything. Except the weird thing is, I have flashed custom ROM's at least over a couple dozen times and custom recovery twice.
What firmware are you on? I'm sorry if you are on MF3 you cannot downgrade. If you are on MF3, you can root and use safestrap to flash tw roms. Your options are either to stay on MF3 and root it or upgrade.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
HiTideBlastoise said:
What firmware are you on? I'm sorry if you are on MF3 you cannot downgrade. If you are on MF3, you can root and use safestrap to flash tw roms. Your options are either to stay on MF3 and root it or upgrade.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
MDL
Here...
http://www.androidrootz.com/2013/06...alaxy-s4-gt-i505-m919-i337-international.html
There is ALWAYS risk. If you try it, you take responsibility for the risk!
I suggest you use the XDA search function or Google if you have any more concers because the answer has generally already been posted to most questions...you just have to search for them and read / learn about them.
Good luck.
**EDIT**
Why not just wait until one of the Devs releases the ODIN TAR for 4.3? It should be available soon after the OTA.
Better yet, just flash a 4.3 ROM to your phone. That way, you can still have the option of Rooting or using a custom recovery on your phone. If you take the 4.3 OTA or ODIN 4.3 to your phone, you will not be able to ROOT or use a custom recovery, at least not yet.

[Q] (Noob?) question - stock 4.3 to custom 4.4 rom

I've been trying to figure this out for the last day, with no success.
I've got a rooted Note 3 N9005 (MJ7) stock. this is a 4.3 Rom. Knox status is0x0 (didn't trip it when I've rooted it ages ago).
I had enough of sammy rom, and I want to play with some of the new 4.4.4 custom roms.
I'm totally and utterly lost regarding what's tripping knox, and what are the needed steps in order to achieve that.
From what I understand, flashing TWRP (or any other custom recovery) will trip knox. I'm fine with that.
I'm not sure if I'm supposed to first upgrade my 4.3 to an official 4.4.2, and what / if is all the lock/unlock bootloader which seems to differ between versions (4.3 and 4.4). There also seem to be different versions of TWRP depending on if you're on 4.3 or 4.4?
Can I simply flash TWRP on my rooted 4.3, backup, flash new shinny 4.4.4 rom, and be happy ? Will that keep the root ?
Otherwise, do i need to upgrade to official 4.4.2 version first? will that lose root and I'll have to reroot the new version, and then flash TWRP and then flash 4.4.4 roms?
Any kind of help (or point me to an article that discusses it, even though I didn't find any, and i've searched) will be highly appreciated.
Cheers and thanks in advance.
_Noctis_ said:
I've been trying to figure this out for the last day, with no success.
I've got a rooted Note 3 N9005 (MJ7) stock. this is a 4.3 Rom. Knox status is0x0 (didn't trip it when I've rooted it ages ago).
I had enough of sammy rom, and I want to play with some of the new 4.4.4 custom roms.
I'm totally and utterly lost regarding what's tripping knox, and what are the needed steps in order to achieve that.
From what I understand, flashing TWRP (or any other custom recovery) will trip knox. I'm fine with that.
I'm not sure if I'm supposed to first upgrade my 4.3 to an official 4.4.2, and what / if is all the lock/unlock bootloader which seems to differ between versions (4.3 and 4.4). There also seem to be different versions of TWRP depending on if you're on 4.3 or 4.4?
Can I simply flash TWRP on my rooted 4.3, backup, flash new shinny 4.4.4 rom, and be happy ? Will that keep the root ?
Otherwise, do i need to upgrade to official 4.4.2 version first? will that lose root and I'll have to reroot the new version, and then flash TWRP and then flash 4.4.4 roms?
Any kind of help (or point me to an article that discusses it, even though I didn't find any, and i've searched) will be highly appreciated.
Cheers and thanks in advance.
Click to expand...
Click to collapse
If you aren't concerned about KNOX, upgrade to a 4.4 ROM (Official) via ODIN which will upgrade the bootloader, then once that's all done, flash TWRP for 4.4 then download your ROMs and flash via TWRP as normal.
radicalisto said:
If you aren't concerned about KNOX, upgrade to a 4.4 ROM (Official) via ODIN which will upgrade the bootloader, then once that's all done, flash TWRP for 4.4 then download your ROMs and flash via TWRP as normal.
Click to expand...
Click to collapse
Not concerned any more ...
Out of curiosity, what exactly kills the root? flashing a rom doesn't. upgrading via odin ? I'm assuming it has nothing to do with the system/cache, since each flash usually wipes them, so, where does it live?
Cheers
_Noctis_ said:
Not concerned any more ...
Out of curiosity, what exactly kills the root? flashing a rom doesn't. upgrading via odin ? I'm assuming it has nothing to do with the system/cache, since each flash usually wipes them, so, where does it live?
Cheers
Click to expand...
Click to collapse
Reflashing the ROM back to stock is what kills root. It's easy to re-root again once you've tripped KNOX anyways.
But tbh, once you install a custom recovery after you've upgraded your boot loader, you won't need to root. It isn't required for custom recovery
Sent from my Spectrum ZX +2
EDIT: Have you used ODIN to flash stock images before? If not, have a read around, it's pretty straight forward though.
radicalisto said:
Reflashing the ROM back to stock is what kills root. It's easy to re-root again once you've tripped KNOX anyways.
But tbh, once you install a custom recovery after you've upgraded your boot loader, you won't need to root. It isn't required for custom recovery
Sent from my Spectrum ZX +2
EDIT: Have you used ODIN to flash stock images before? If not, have a read around, it's pretty straight forward though.
Click to expand...
Click to collapse
I see ... so -> flash stock (kills root) -> flash TWRP (trips knox) -> flash custom rom without worrying about root ? (wouldn't i need it for titanium backup ,or do custom roms come with SU preinstalled?)
Yep, used odin. file on comp, download mode, couple of ticks, clicky clicky, happiness ensues ...
Yeah you're pretty much spot on. Yeah most ROMs are pre-rooted and if they aren't you can just flash superSU via your recovery. But you should be good to go and know what you're doing by the sounds of it.
Enjoy flashing them ROMs and make an efs backup and store off the device too. There's an adb script for it here (forget where but its here, development thread I think) don't use any apps from the play store as they are notorious for bricking Samsung devices.
Sent from my Spectrum ZX +2
radicalisto said:
Yeah you're pretty much spot on. Yeah most ROMs are pre-rooted and if they aren't you can just flash superSU via your recovery. But you should be good to go and know what you're doing by the sounds of it.
Enjoy flashing them ROMs and make an efs backup and store off the device too. There's an adb script for it here (forget where but its here, development thread I think) don't use any apps from the play store as they are notorious for bricking Samsung devices.
Sent from my Spectrum ZX +2
Click to expand...
Click to collapse
lol ...notorious for bricking samsung devices ... i like it ...
i ran one already (zipped a 6MB and a 14.5MB image and tar into a 300kb zip), and been told you can do that from inside TWRP as well ...
I'll take a deep breath, and start downloading the official image and roms ...
I'll update if i'll get to the other side
out of curiosity ... does it matter which official 4.4.2 image i'm flashing ? (i'm getting the NZ one ...but i assume they should all be similar, and / or that it doesn't matter since i'll be flashing something else on it anyways, right ?
_Noctis_ said:
out of curiosity ... does it matter which official 4.4.2 image i'm flashing ? (i'm getting the NZ one ...but i assume they should all be similar, and / or that it doesn't matter since i'll be flashing something else on it anyways, right ?
Click to expand...
Click to collapse
Yeah try and keep to the country your device is from, otherwise you have to find the right PIT file, and the partitions vary etc
radicalisto said:
Yeah try and keep to the country your device is from, otherwise you have to find the right PIT file, and the partitions vary etc
Click to expand...
Click to collapse
Rubbish. ..I don't recall seeing an australian one... I'll have another look, otherwise ill look into the pit thingy. Thanks.

Update using ota or keep root (noob)

Greetings! Im new to the rooting scene and i have a rooted note 3 on 4.3. I would like to know if it is better to install the ota update then root again or just flash a new rom that is kitkat already.
Thanks in advance.
beefy314 said:
Greetings! Im new to the rooting scene and i have a rooted note 3 on 4.3. I would like to know if it is better to install the ota update then root again or just flash a new rom that is kitkat already.
Thanks in advance.
Click to expand...
Click to collapse
You cannot OTA update since you have rooted. You can only download stock firmware and flash via Odin. And yes, you have to root again, also via Odin.
A new (custom) rom is another option, I have no idea with it.
For the time being, I would browse the Note 3 Android Development forum and see if a custom ROM is what you want. If it is, then by all means go ahead and flash one. If not, then upgrading to 4.4.2 and rooting is the best bet. Personally, I was on stock 4.4.2 rooted, and it didn't take long for me to flash a custom ROM. I'm on my third custom ROM in a month, so it can definitely get addicting.
You can update via OTA.
Thereafter, flash the old kernel xxund3.
root via towel root, and reflash the Kernel that came with the OTA update.
All via Odin. I don't think there's any way to do it, yet, and at the same time keeping knox 0x0.
link is here: http://forum.xda-developers.com/galaxy-note-3/general/root-root-xxufnf4-stock-firmware-knox-t2840150
Cheers!

[Q] Proper Rooting and SafeStrap Process NC4

Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Dravekx said:
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Click to expand...
Click to collapse
I didn't upgrade to NC4, it came like this.
rdar_93 said:
I didn't upgrade to NC4, it came like this.
Click to expand...
Click to collapse
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
mirrin said:
You do not have a dev version so cm 11 or 12 is a far off dream you won't get. Your bootloader is locked there is no unlock.
You are in luck nc4 is root able using towel root then safe strap and the unified firmware. You will need odin and a pc for flashing a few things the NK1 modem towel root and the unified firmware. Pick a rom from the development thread i suggest jasmine 1.x or eclipse.
Click to expand...
Click to collapse
Copied from another post I had.
I don't know much about the device which is why I'm trying to find out.
Dravekx said:
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
Click to expand...
Click to collapse
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
rdar_93 said:
Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
Click to expand...
Click to collapse
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
rdar_93 said:
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
Click to expand...
Click to collapse
Dravekx said:
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
Click to expand...
Click to collapse
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
rdar_93 said:
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
Click to expand...
Click to collapse
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Dravekx said:
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Click to expand...
Click to collapse
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
rdar_93 said:
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
Click to expand...
Click to collapse
The kernel can't be changed...although it can be "tuned" if you have root.
http://forum.xda-developers.com/showthread.php?p=58813428
Sent from my Note 3 via Tapatalk
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
BladeRunner said:
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
Click to expand...
Click to collapse
Thanks man, I was supposed to update this thread saying that I got through with the proper procedure for installing Jasmine Rom
Although I was running Eclipse before, and I wanted to try going back to stock but it just got stuck on the Verizon splash screen
I'm thinking it's because I had the NC2 kernel active when I should have gone back to the NC4 kernel
I looked for a NC4 kernel to flash but I only saw the modems and tar files, so not knowing if those were the same as kernels I decided to just try Jasmine. So far, I like it.
I have crazy battery drain though. I think it's because I'm running it in Slot 1
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
en11gma said:
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
Click to expand...
Click to collapse
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
rdar_93 said:
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
Click to expand...
Click to collapse
Safestrap does not trip knox.
mjh68 said:
Safestrap does not trip knox.
Click to expand...
Click to collapse
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
rdar_93 said:
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
Click to expand...
Click to collapse
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
mjh68 said:
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
Click to expand...
Click to collapse
Then I must be confused about what knox really is.
What is "Knox" then?

note 3 still on 4.3 towelroot - now need to flash custom recovery but uncertain

After rooting my Note 3 (not branded or simlocked) many moons ago with Towelroot, I've come to the point of wanting to update things a tad. I never installed a custom recovery so it's just a root.
However, looking through the multiple threads here and not wishing to make a bad mistake I'm a little confused and could do with some clear pointers.
I am currently on 4.3 Jellybean BL: N900XXUBMJ3 so most threads deal with later versions and I really want to know what the best path is to now being able to start trying out custom roms such as the DarkWolf ROM or just get this to Lollipop. Obviously now Knox 1x0 is no longer a problem as it's out of warranty.
I assume that the step should really be to install a custom recovery and for that there is a confusion of whether I can do that directly on my current bootloader or do I have install 4.4.2 as some threads suggest?
Probably due to my misunderstanding I am not sure if a 4.4 bootloader is separate from the firmware. If it comes to having to update the bootloader do I have to completely upgrade to Kitkat or can I just update the bootloader only?
louiscar said:
After rooting my Note 3 (not branded or simlocked) many moons ago with Towelroot, I've come to the point of wanting to update things a tad. I never installed a custom recovery so it's just a root.
However, looking through the multiple threads here and not wishing to make a bad mistake I'm a little confused and could do with some clear pointers.
I am currently on 4.3 Jellybean BL: N900XXUBMJ3 so most threads deal with later versions and I really want to know what the best path is to now being able to start trying out custom roms such as the DarkWolf ROM or just get this to Lollipop. Obviously now Knox 1x0 is no longer a problem as it's out of warranty.
I assume that the step should really be to install a custom recovery and for that there is a confusion of whether I can do that directly on my current bootloader or do I have install 4.4.2 as some threads suggest?
Probably due to my misunderstanding I am not sure if a 4.4 bootloader is separate from the firmware. If it comes to having to update the bootloader do I have to completely upgrade to Kitkat or can I just update the bootloader only?
Click to expand...
Click to collapse
You can flash custom recovery for 4.3 but all 5.1.1 and 6.0 roms require 5.0 bootloader to make the camera to work correctly.
Flash 4.3 custom recovery. Then flash the rom of your choice. Then flash 5.0 bootloader. After that flash 4.4.2/5.0 recovery.
Or flash 5.0 firmware. Flash 4.4.2/5.0 custom recovery. Flash the rom of your choice.
Sent from my SM-G925F using XDA Free mobile app
Rosli59564 said:
You can flash custom recovery for 4.3 but all 5.1.1 and 6.0 roms require 5.0 bootloader to make the camera to work correctly.
Flash 4.3 custom recovery. Then flash the rom of your choice. Then flash 5.0 bootloader. After that flash 4.4.2/5.0 recovery.
Or flash 5.0 firmware. Flash 4.4.2/5.0 custom recovery. Flash the rom of your choice.
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for that Rosli,
I actually found that OTA was working still so I let it update. This went through a lot of updates one by one till it got to the latest 4.3. All this left root intact. Then it downloaded the kitkat but that failed. I had figured that if I let it update to Lollipop I could then root it with CF Autoroot but as it's not going any further (probably due to the fact that I'm rooted .. maybe), I will have to manually update via Odin.
I would probably in that case prefer your advice of flashing 5.0 directly then custom recovery, however, do I have to CF autoroot or can I flash recovery without root and then root after that?
louiscar said:
Thanks for that Rosli,
I actually found that OTA was working still so I let it update. This went through a lot of updates one by one till it got to the latest 4.3. All this left root intact. Then it downloaded the kitkat but that failed. I had figured that if I let it update to Lollipop I could then root it with CF Autoroot but as it's not going any further (probably due to the fact that I'm rooted .. maybe), I will have to manually update via Odin.
I would probably in that case prefer your advice of flashing 5.0 directly then custom recovery, however, do I have to CF autoroot or can I flash recovery without root and then root after that?
Click to expand...
Click to collapse
Can flash custom recovery then root. But if you're going to flash custom rom no need to root after custom recovery.
Sent from my SM-G925F

Categories

Resources